freebsd-dev/sys/pc98/cbus/cbus.h
KATO Takenori 37c813d93c From submitter:
The attached diff attempts to eliminate as much of the difference
between the i386 and the pc98 version of the file as possible.  It
should not make any semantic difference (it consists of whitespace
changes, order changes, comment changes, changes of case for hex
constants, and merging in a couple of constants that hadn't made it
from the i386 version.)

Submitted by:	eivind
1999-06-25 15:17:20 +00:00

184 lines
7.0 KiB
C

/*-
* Copyright (c) 1990 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* William Jolitz.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: @(#)isa.h 5.7 (Berkeley) 5/9/91
* $Id: pc98.h,v 1.10 1997/02/22 09:43:42 peter Exp $
*/
#ifndef _PC98_PC98_PC98_H_
#define _PC98_PC98_PC98_H_
/* BEWARE: Included in both assembler and C code */
/*
* PC98 Bus conventions
* modified for PC9801 by A.Kojima F.Ukai M.Ishii
* Kyoto University Microcomputer Club (KMC)
*/
/*
* Input / Output Port Assignments
*/
#ifndef IO_ISABEGIN
#define IO_ISABEGIN 0x000 /* 0x000 - Beginning of I/O Registers */
/* PC98 IO address ... very dirty (^_^; */
#define IO_ICU1 0x000 /* 8259A Interrupt Controller #1 */
#define IO_DMA 0x001 /* 8237A DMA Controller */
#define IO_ICU2 0x008 /* 8259A Interrupt Controller #2 */
#define IO_RTC 0x020 /* 4990A RTC */
#define IO_DMAPG 0x021 /* DMA Page Registers */
#define IO_COM1 0x030 /* 8251A RS232C serial I/O (int) */
#define IO_SYSPORT 0x031 /* 8255A System Port */
#define IO_PPI 0x035 /* Programmable Peripheral Interface */
#define IO_LPT 0x040 /* 8255A Printer Port */
#define IO_KBD 0x041 /* 8251A Keyboard */
#define IO_NMI 0x050 /* NMI Control */
#define IO_WAIT 0x05F /* WAIT 0.6 us */
#define IO_GDC1 0x060 /* 7220 GDC Text Control */
#define IO_TIMER1 0x071 /* 8253C Timer */
#define IO_SASI 0x080 /* SASI Hard Disk Controller */
#define IO_FD1 0x090 /* 765A 1MB FDC */
#define IO_GDC2 0x0A0 /* 7220 GDC Graphic Control */
#define IO_CGROM 0x0A1 /* Character ROM */
#define IO_COM2 0x0B1 /* 8251A RS232C serial I/O (ext) */
#define IO_COM3 0x0B9 /* 8251A RS232C serial I/O (ext) */
#define IO_FDPORT 0x0BE /* FD I/F port (1M<->640K,EMTON) */
#define IO_FD2 0x0C8 /* 765A 640KB FDC */
#define IO_SIO1 0x0D0 /* MC16550II ext RS232C */
#define IO_REEST 0x0F0 /* CPU FPU reset */
#define IO_A2OEN 0x0F2 /* A20 enable */
#define IO_A20CT 0x0F6 /* A20 control enable/disable */
#define IO_NPX 0x0F8 /* Numeric Coprocessor */
#define IO_SOUND 0x188 /* YM2203 FM sound board */
#define IO_EGC 0x4A0 /* 7220 GDC Graphic Control */
#define IO_SCSI 0xCC0 /* SCSI Controller */
#define IO_SIO2 0x8D0 /* MC16550II ext RS232C */
#define IO_BEEPF 0x3FDB /* beep frequency */
#define IO_MOUSE 0x7FD9 /* mouse */
#define IO_BMS 0x7FD9 /* Bus Mouse */
#define IO_MSE 0x7FD9 /* Bus Mouse */
#define IO_MOUSETM 0xDFBD /* mouse timer */
#define IO_WD1_NEC 0x640 /* 98note IDE Hard disk controller */
#define IO_WD1_EPSON 0x80 /* 386note Hard disk controller */
#define IO_WD1 IO_WD1_NEC /* IDE Hard disk controller */
#define IO_ISAEND 0xFFFF /* - 0x3FF End of I/O Registers */
#endif /* !IO_ISABEGIN */
/*
* Input / Output Port Sizes - these are from several sources, and tend
* to be the larger of what was found, ie COM ports can be 4, but some
* boards do not fully decode the address, thus 8 ports are used.
*/
#ifndef IO_ISASIZES
#define IO_ISASIZES
#define IO_ASCSIZE 5 /* AmiScan GI1904-based hand scanner */
#define IO_CGASIZE 16 /* CGA controllers */
#define IO_COMSIZE 8 /* 8250, 16X50 com controllers (4?) */
#define IO_DMASIZE 16 /* 8237 DMA controllers */
#define IO_DPGSIZE 32 /* 74LS612 DMA page registers */
#define IO_EISASIZE 4096 /* EISA controllers */
#define IO_FDCSIZE 8 /* Nec765 floppy controllers */
#define IO_GAMSIZE 16 /* AT compatible game controllers */
#define IO_GSCSIZE 8 /* GeniScan GS-4500G hand scanner */
#define IO_ICUSIZE 16 /* 8259A interrupt controllers */
#define IO_KBDSIZE 16 /* 8042 Keyboard controllers */
#define IO_LPTSIZE 8 /* LPT controllers, some use only 4 */
#define IO_MDASIZE 16 /* Monochrome display controllers */
#define IO_NPXSIZE 16 /* 80387/80487 NPX registers */
#define IO_PMPSIZE 2 /* 82347 power management peripheral */
#define IO_PSMSIZE 5 /* 8042 Keyboard controllers */
#define IO_RTCSIZE 16 /* CMOS real time clock, NMI control */
#define IO_TMRSIZE 16 /* 8253 programmable timers */
#define IO_VGASIZE 16 /* VGA controllers */
#define IO_WDCSIZE 8 /* WD compatible disk controllers */
#endif /* !IO_ISASIZES */
/*
* Input / Output Memory Physical Addresses
*/
#ifndef IOM_BEGIN
#define IOM_BEGIN 0x0A0000 /* Start of I/O Memory "hole" */
#define IOM_END 0x100000 /* End of I/O Memory "hole" */
#define IOM_SIZE (IOM_END - IOM_BEGIN)
#endif /* !IOM_BEGIN */
/*
* RAM Physical Address Space (ignoring the above mentioned "hole")
*/
#ifndef RAM_BEGIN
#define RAM_BEGIN 0x0000000 /* Start of RAM Memory */
#ifdef EPSON_BOUNCEDMA
#define RAM_END 0x0f00000 /* End of EPSON GR?? RAM Memory */
#else
#define RAM_END 0x1000000 /* End of RAM Memory */
#endif
#define RAM_SIZE (RAM_END - RAM_BEGIN)
#endif /* !RAM_BEGIN */
#ifndef PC98 /* IBM-PC */
/*
* Oddball Physical Memory Addresses
*/
#ifndef COMPAQ_RAMRELOC
#define COMPAQ_RAMRELOC 0x80C00000 /* Compaq RAM relocation/diag */
#define COMPAQ_RAMSETUP 0x80C00002 /* Compaq RAM setup */
#define WEITEK_FPU 0xC0000000 /* WTL 2167 */
#define CYRIX_EMC 0xC0000000 /* Cyrix EMC */
#endif /* !COMPAQ_RAMRELOC */
#endif
#define M_NEC_PC98 0x0001
#define M_EPSON_PC98 0x0002
#define M_NOT_H98 0x0010
#define M_H98 0x0020
#define M_NOTE 0x0040
#define M_NORMAL 0x1000
#define M_8M 0x8000
/*
* Obtained from NetBSD/pc98
*/
#define MADDRUNK -1
#define IRQUNK 0
#define DRQUNK -1
#endif /* !_PC98_PC98_PC98_H_ */