freebsd-dev/sys/dev/uart/uart_cpu_pc98.c
Marcel Moolenaar 875f70dba4 Revert the introduction of iobase in struct uart_bas. Both the SAB82532
and the Z8530 drivers used the I/O address as a quick and dirty way to
determine which channel they operated on, but formalizing this by
introducing iobase is not a solution. How for example would a driver
know which channel it controls for a multi-channel UART that only has a
single I/O range?

Instead, add an explicit field, called chan, to struct uart_bas that
holds the channel within a device, or 0 otherwise. The chan field is
initialized both by the system device probing (i.e. a system console)
or it is passed down to uart_bus_probe() by any of the bus front-ends.
As such, it impacts all platforms and bus drivers and makes it a rather
large commit.

Remove the use of iobase in uart_cpu_eqres() for pc98. It is expected
that platforms have the capability to compare tag and handle pairs for
equality; as to determine whether two pairs access the same device or
not. The use of iobase for pc98 makes it impossible to formalize this
and turn it into a real newbus function later. This commit reverts
uart_cpu_eqres() for pc98 to an unimplemented function. It has to be
reimplemented using only the tag and handle fields in struct uart_bas.

Rewrite the SAB82532 and Z8530 drivers to use the chan field in struct
uart_bas. Remove the IS_CHANNEL_A and IS_CHANNEL_B macros. We don't
need to abstract anything anymore.

Discussed with: nyan
Tested on: i386, ia64, sparc64
2003-09-26 05:14:56 +00:00

100 lines
3.1 KiB
C

/*
* Copyright (c) 2003 M. Warner Losh, Marcel Moolenaar
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <machine/bus.h>
#include <dev/uart/uart.h>
#include <dev/uart/uart_cpu.h>
int
uart_cpu_eqres(struct uart_bas *b1, struct uart_bas *b2)
{
return (0); /* XXX */
}
int
uart_cpu_getdev(int devtype, struct uart_devinfo *di)
{
unsigned int i, ivar, flags;
/*
* There are 2 built-in serial ports on pc98 hardware. The
* first one is 8251 and the second one is I think an enhance
* version of that. However, for the sio driver, flags selected
* which type of uart was in the sytem. We use something similar
* to sort things out.
*/
for (i = 0; i < 1; i++) {
if (resource_int_value("uart", i, "flags", &flags))
continue;
if (devtype == UART_DEV_CONSOLE && !UART_FLAGS_CONSOLE(flags))
continue;
if (devtype == UART_DEV_DBGPORT && !UART_FLAGS_DBGPORT(flags))
continue;
/*
* We have a possible device. Make sure it's enabled and
* that we have an I/O port.
*/
if (resource_int_value("uart", i, "disabled", &ivar) == 0 &&
ivar != 0)
continue;
if (resource_int_value("uart", i, "port", &ivar) != 0 ||
ivar == 0)
continue;
/*
* Got it. Fill in the instance and return it. We have
* both i8251 an ns8250 and successors on pc98.
*/
if (flags & 0x100)
di->ops = uart_ns8250_ops;
else
di->ops = uart_i8251_ops;
di->bas.chan = 0;
di->bas.bst = I386_BUS_SPACE_IO;
if (bus_space_map(di->bas.bst, ivar, 8, 0, &di->bas.bsh) != 0)
continue;
di->bas.regshft = 0;
di->bas.rclk = 0;
if (resource_int_value("uart", i, "baud", &ivar) != 0)
ivar = 0;
di->baudrate = ivar;
di->databits = 8;
di->stopbits = 1;
di->parity = UART_PARITY_NONE;
return (0);
}
return (ENXIO);
}