freebsd-dev/sys/i386/include/specialreg.h
1997-02-22 09:48:43 +00:00

149 lines
5.4 KiB
C

/*-
* Copyright (c) 1991 The Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: @(#)specialreg.h 7.1 (Berkeley) 5/9/91
* $Id$
*/
#ifndef _MACHINE_SPECIALREG_H_
#define _MACHINE_SPECIALREG_H_
/*
* Bits in 386 special registers:
*/
#define CR0_PE 0x00000001 /* Protected mode Enable */
#define CR0_MP 0x00000002 /* "Math" Present (NPX or NPX emulator) */
#ifdef notused
#define CR0_EM 0x00000004 /* EMulate non-NPX coproc. (trap ESC only) */
#endif
#define CR0_TS 0x00000008 /* Task Switched (if MP, trap ESC and WAIT) */
#ifdef notused
#define CR0_ET 0x00000010 /* Extension Type (387 (if set) vs 287) */
#endif
#define CR0_PG 0x80000000 /* PaGing enable */
/*
* Bits in 486 special registers:
*/
#define CR0_NE 0x00000020 /* Numeric Error enable (EX16 vs IRQ13) */
#define CR0_WP 0x00010000 /* Write Protect (honor page protect in all modes) */
#define CR0_AM 0x00040000 /* Alignment Mask (set to enable AC flag) */
#define CR0_NW 0x20000000 /* Not Write-through */
#define CR0_CD 0x40000000 /* Cache Disable */
/*
* Bits in PPro special registers
*/
#define CR4_VME 0x00000001 /* Virtual 8086 mode extensions */
#define CR4_PVI 0x00000002 /* Protected-mode virtual interrupts */
#define CR4_TSD 0x00000004 /* Time stamp disable */
#define CR4_DE 0x00000008 /* Debugging extensions */
#define CR4_PSE 0x00000010 /* Page size extensions */
#define CR4_PAE 0x00000020 /* Physical address extension */
#define CR4_MCE 0x00000040 /* Machine check enable */
#define CR4_PGE 0x00000080 /* Page global enable */
#define CR4_PCE 0x00000100 /* Performance monitoring counter enable */
/*
* CPUID instruction features register
*/
#define CPUID_FPU 0x0001
#define CPUID_VME 0x0002
#define CPUID_DE 0x0004
#define CPUID_PSE 0x0008
#define CPUID_TSC 0x0010
#define CPUID_MSR 0x0020
#define CPUID_PAE 0x0040
#define CPUID_MCE 0x0080
#define CPUID_CX8 0x0100
#define CPUID_APIC 0x0200
#define CPUID_B10 0x0400
#define CPUID_B11 0x0800
#define CPUID_MTRR 0x1000
#define CPUID_PGE 0x2000
#define CPUID_MCA 0x4000
#define CPUID_CMOV 0x8000
/*
* Cyrix 486 DLC special registers, accessible as IO ports.
*/
#define CCR0 0xc0 /* configuration control register 0 */
#define CCR0_NC0 0x01 /* first 64K of each 1M memory region is
non-cacheable */
#define CCR0_NC1 0x02 /* 640K-1M region is non-cacheable */
#define CCR0_A20M 0x04 /* enables A20M# input pin */
#define CCR0_KEN 0x08 /* enables KEN# input pin */
#define CCR0_FLUSH 0x10 /* enables FLUSH# input pin */
#define CCR0_BARB 0x20 /* flushes internal cache when entering hold
state */
#define CCR0_CO 0x40 /* cache org: 1=direct mapped, 0=2x set assoc */
#define CCR0_SUSPEND 0x80 /* enables SUSP# and SUSPA# pins */
#define CCR1 0xc1 /* configuration control register 1 */
#define CCR1_RPL 0x01 /* enables RPLSET and RPLVAL# pins */
/* the remaining 7 bits of this register are reserved */
/*
* the following four 3-byte registers control the non-cacheable regions.
* These registers must be written as three separate bytes.
*
* NCRx+0: A31-A24 of starting address
* NCRx+1: A23-A16 of starting address
* NCRx+2: A15-A12 of starting address | NCR_SIZE_xx.
*
* The non-cacheable region's starting address must be aligned to the
* size indicated by the NCR_SIZE_xx field.
*/
#define NCR1 0xc4
#define NCR2 0xc7
#define NCR3 0xca
#define NCR4 0xcd
#define NCR_SIZE_0K 0
#define NCR_SIZE_4K 1
#define NCR_SIZE_8K 2
#define NCR_SIZE_16K 3
#define NCR_SIZE_32K 4
#define NCR_SIZE_64K 5
#define NCR_SIZE_128K 6
#define NCR_SIZE_256K 7
#define NCR_SIZE_512K 8
#define NCR_SIZE_1M 9
#define NCR_SIZE_2M 10
#define NCR_SIZE_4M 11
#define NCR_SIZE_8M 12
#define NCR_SIZE_16M 13
#define NCR_SIZE_32M 14
#define NCR_SIZE_4G 15
#endif /* !_MACHINE_SPECIALREG_H_ */