freebsd-dev/sys/mips/conf/AP93

45 lines
1.0 KiB
Plaintext

#
# Specific board setup for the Atheros AP91 reference board.
#
# The AP93 has the following hardware:
#
# + AR7240 CPU SoC
# + AR9280 Wifi
# + Integrated switch (XXX speed?)
# + 16MB flash
# + 64MB RAM
# + uboot environment
# $FreeBSD$
include "AR724X_BASE"
ident "AP93"
hints "AP93.hints"
options AR71XX_REALMEM=64*1024*1024
options AR71XX_ENV_UBOOT
# For DOS - enable if required
options MSDOSFS
# uncompress - to boot read-only lzma natively from flash
device geom_uncompress
options GEOM_UNCOMPRESS
options ROOTDEVNAME=\"ufs:/dev/map/rootfs.uncompress\"
# Used for the static uboot partition map
device geom_map
# Options needed for the EEPROM based calibration/PCI configuration data.
options AR71XX_ATH_EEPROM # Fetch EEPROM/PCI config from flash
options ATH_EEPROM_FIRMWARE # Use EEPROM from flash
device firmware # Used by the above
# Options required for miiproxy and mdiobus
options ARGE_MDIO # Export an MDIO bus separate from arge
device miiproxy # MDIO bus <-> MII PHY rendezvous
device etherswitch
device arswitch