9389d5a95e
These variants have a few differences from the default AR9485 NIC, namely: * a non-default antenna switch config; * slightly different RX gain table setup; * an external XLNA hooked up to a GPIO pin; * (and not yet done) RSSI threshold differences when doing slow diversity. To make this possible: * Add the PCI device list from Linux ath9k, complete with vendor and sub-vendor IDs for various things to be enabled; * .. and until FreeBSD learns about a PCI device list like this, write a search function inspired by the USB device enumeration code; * add HAL_OPS_CONFIG to the HAL attach methods; the HAL can use this to initialise its local driver parameters upon attach; * copy these parameters over in the AR9300 HAL; * don't default to override the antenna switch - only do it for the chips that require it; * I brought over ar9300_attenuation_apply() from ath9k which is cleaner and easier to read for this particular NIC. This is a work in progress. I'm worried that there's some post-AR9380 NIC out there which doesn't work without the antenna override set as I currently haven't implemented bluetooth coexistence for the AR9380 and later HAL. But I'd rather have this code in the tree and fix it up before 11.0-RELEASE happens versus having a set of newer NICs in laptops be effectively RX deaf. Tested: * AR9380 (STA) * AR9485 CUS198 (STA) Obtained from: Qualcomm Atheros, Linux ath9k |
||
|---|---|---|
| .. | ||
| ar5k_0007.ini | ||
| ar5210_attach.c | ||
| ar5210_beacon.c | ||
| ar5210_interrupts.c | ||
| ar5210_keycache.c | ||
| ar5210_misc.c | ||
| ar5210_phy.c | ||
| ar5210_power.c | ||
| ar5210_recv.c | ||
| ar5210_reset.c | ||
| ar5210_xmit.c | ||
| ar5210.h | ||
| ar5210desc.h | ||
| ar5210phy.h | ||
| ar5210reg.h | ||