freebsd-dev/sys/dev/ath/ath_hal/ah_eeprom_v4k.h
Adrian Chadd 0d2dd30cbd Bring over a pdadc calibration fix from ath9k - unused power detector
gain values should be 58, not the previous values.

Obtained From:	linux ath9k
2011-04-22 10:57:46 +00:00

183 lines
6.0 KiB
C

/*
* Copyright (c) 2009 Rui Paulo <rpaulo@FreeBSD.org>
* Copyright (c) 2008 Sam Leffler, Errno Consulting
* Copyright (c) 2008 Atheros Communications, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
* $FreeBSD$
*/
#ifndef _AH_EEPROM_V4K_H_
#define _AH_EEPROM_V4K_H_
#include "ah_eeprom.h"
#include "ah_eeprom_v14.h"
#if _BYTE_ORDER == _BIG_ENDIAN
#define __BIG_ENDIAN_BITFIELD
#endif
#define AR9285_RDEXT_DEFAULT 0x1F
#define AR5416_4K_EEP_PD_GAIN_BOUNDARY_DEFAULT 58
#undef owl_eep_start_loc
#ifdef __LINUX_ARM_ARCH__ /* AP71 */
#define owl_eep_start_loc 0
#else
#define owl_eep_start_loc 64
#endif
// 16-bit offset location start of calibration struct
#define AR5416_4K_EEP_START_LOC 64
#define AR5416_4K_NUM_2G_CAL_PIERS 3
#define AR5416_4K_NUM_2G_CCK_TARGET_POWERS 3
#define AR5416_4K_NUM_2G_20_TARGET_POWERS 3
#define AR5416_4K_NUM_2G_40_TARGET_POWERS 3
#define AR5416_4K_NUM_CTLS 12
#define AR5416_4K_NUM_BAND_EDGES 4
#define AR5416_4K_NUM_PD_GAINS 2
#define AR5416_4K_MAX_CHAINS 1
/*
* NB: The format in EEPROM has words 0 and 2 swapped (i.e. version
* and length are swapped). We reverse their position after reading
* the data into host memory so the version field is at the same
* offset as in previous EEPROM layouts. This makes utilities that
* inspect the EEPROM contents work without looking at the PCI device
* id which may or may not be reliable.
*/
typedef struct BaseEepHeader4k {
uint16_t version; /* NB: length in EEPROM */
uint16_t checksum;
uint16_t length; /* NB: version in EEPROM */
uint8_t opCapFlags;
uint8_t eepMisc;
uint16_t regDmn[2];
uint8_t macAddr[6];
uint8_t rxMask;
uint8_t txMask;
uint16_t rfSilent;
uint16_t blueToothOptions;
uint16_t deviceCap;
uint32_t binBuildNumber;
uint8_t deviceType;
uint8_t txGainType; /* high power tx gain table support */
} __packed BASE_EEP4K_HEADER; // 32 B
typedef struct ModalEepHeader4k {
uint32_t antCtrlChain[AR5416_4K_MAX_CHAINS]; // 4
uint32_t antCtrlCommon; // 4
int8_t antennaGainCh[AR5416_4K_MAX_CHAINS]; // 1
uint8_t switchSettling; // 1
uint8_t txRxAttenCh[AR5416_4K_MAX_CHAINS]; // 1
uint8_t rxTxMarginCh[AR5416_4K_MAX_CHAINS]; // 1
uint8_t adcDesiredSize; // 1
int8_t pgaDesiredSize; // 1
uint8_t xlnaGainCh[AR5416_4K_MAX_CHAINS]; // 1
uint8_t txEndToXpaOff; // 1
uint8_t txEndToRxOn; // 1
uint8_t txFrameToXpaOn; // 1
uint8_t thresh62; // 1
uint8_t noiseFloorThreshCh[AR5416_4K_MAX_CHAINS]; // 1
uint8_t xpdGain; // 1
uint8_t xpd; // 1
int8_t iqCalICh[AR5416_4K_MAX_CHAINS]; // 1
int8_t iqCalQCh[AR5416_4K_MAX_CHAINS]; // 1
uint8_t pdGainOverlap; // 1
#ifdef __BIG_ENDIAN_BITFIELD
uint8_t ob_1:4, ob_0:4; // 1
uint8_t db1_1:4, db1_0:4; // 1
#else
uint8_t ob_0:4, ob_1:4;
uint8_t db1_0:4, db1_1:4;
#endif
uint8_t xpaBiasLvl; // 1
uint8_t txFrameToDataStart; // 1
uint8_t txFrameToPaOn; // 1
uint8_t ht40PowerIncForPdadc; // 1
uint8_t bswAtten[AR5416_4K_MAX_CHAINS]; // 1
uint8_t bswMargin[AR5416_4K_MAX_CHAINS]; // 1
uint8_t swSettleHt40; // 1
uint8_t xatten2Db[AR5416_4K_MAX_CHAINS]; // 1
uint8_t xatten2Margin[AR5416_4K_MAX_CHAINS]; // 1
#ifdef __BIG_ENDIAN_BITFIELD
uint8_t db2_1:4, db2_0:4; // 1
#else
uint8_t db2_0:4, db2_1:4; // 1
#endif
uint8_t version; // 1
#ifdef __BIG_ENDIAN_BITFIELD
uint8_t ob_3:4, ob_2:4; // 1
uint8_t antdiv_ctl1:4, ob_4:4; // 1
uint8_t db1_3:4, db1_2:4; // 1
uint8_t antdiv_ctl2:4, db1_4:4; // 1
uint8_t db2_2:4, db2_3:4; // 1
uint8_t reserved:4, db2_4:4; // 1
#else
uint8_t ob_2:4, ob_3:4;
uint8_t ob_4:4, antdiv_ctl1:4;
uint8_t db1_2:4, db1_3:4;
uint8_t db1_4:4, antdiv_ctl2:4;
uint8_t db2_2:4, db2_3:4;
uint8_t db2_4:4, reserved:4;
#endif
uint8_t tx_diversity;
uint8_t flc_pwr_thresh;
uint8_t bb_scale_smrt_antenna;
#define EEP_4K_BB_DESIRED_SCALE_MASK 0x1f
uint8_t futureModal[1];
SPUR_CHAN spurChans[AR5416_EEPROM_MODAL_SPURS]; // 20 B
} __packed MODAL_EEP4K_HEADER; // == 68 B
typedef struct CalCtlData4k {
CAL_CTL_EDGES ctlEdges[AR5416_4K_MAX_CHAINS][AR5416_4K_NUM_BAND_EDGES];
} __packed CAL_CTL_DATA_4K;
typedef struct calDataPerFreq4k {
uint8_t pwrPdg[AR5416_4K_NUM_PD_GAINS][AR5416_PD_GAIN_ICEPTS];
uint8_t vpdPdg[AR5416_4K_NUM_PD_GAINS][AR5416_PD_GAIN_ICEPTS];
} __packed CAL_DATA_PER_FREQ_4K;
struct ar5416eeprom_4k {
BASE_EEP4K_HEADER baseEepHeader; // 32 B
uint8_t custData[20]; // 20 B
MODAL_EEP4K_HEADER modalHeader; // 68 B
uint8_t calFreqPier2G[AR5416_4K_NUM_2G_CAL_PIERS];
CAL_DATA_PER_FREQ_4K calPierData2G[AR5416_4K_MAX_CHAINS][AR5416_4K_NUM_2G_CAL_PIERS];
CAL_TARGET_POWER_LEG calTargetPowerCck[AR5416_4K_NUM_2G_CCK_TARGET_POWERS];
CAL_TARGET_POWER_LEG calTargetPower2G[AR5416_4K_NUM_2G_20_TARGET_POWERS];
CAL_TARGET_POWER_HT calTargetPower2GHT20[AR5416_4K_NUM_2G_20_TARGET_POWERS];
CAL_TARGET_POWER_HT calTargetPower2GHT40[AR5416_4K_NUM_2G_40_TARGET_POWERS];
uint8_t ctlIndex[AR5416_4K_NUM_CTLS];
CAL_CTL_DATA_4K ctlData[AR5416_4K_NUM_CTLS];
uint8_t padding;
} __packed;
typedef struct {
struct ar5416eeprom_4k ee_base;
#define NUM_EDGES 8
uint16_t ee_numCtls;
RD_EDGES_POWER ee_rdEdgesPower[NUM_EDGES*AR5416_4K_NUM_CTLS];
/* XXX these are dynamically calculated for use by shared code */
int8_t ee_antennaGainMax;
} HAL_EEPROM_v4k;
#endif /* _AH_EEPROM_V4K_H_ */