freebsd-dev/sys/dev/cxgbe/t4_vf.c
Navdeep Parhar 788f3c06f6 cxgbe(4): Use the port's top speed to figure out whether it is "high
speed" or not (for the purpose of calculating the number of queues etc.)
This does the right thing for 25Gbps and 100Gbps ports.
2016-09-24 19:03:05 +00:00

1005 lines
26 KiB
C

/*-
* Copyright (c) 2016 Chelsio Communications, Inc.
* All rights reserved.
* Written by: John Baldwin <jhb@FreeBSD.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_inet.h"
#include "opt_inet6.h"
#include <sys/param.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/priv.h>
#include <dev/pci/pcivar.h>
#if defined(__i386__) || defined(__amd64__)
#include <vm/vm.h>
#include <vm/pmap.h>
#endif
#include "common/common.h"
#include "common/t4_regs.h"
#include "t4_ioctl.h"
#include "t4_mp_ring.h"
/*
* Some notes:
*
* The Virtual Interfaces are connected to an internal switch on the chip
* which allows VIs attached to the same port to talk to each other even when
* the port link is down. As a result, we might want to always report a
* VF's link as being "up".
*
* XXX: Add a TUNABLE and possible per-device sysctl for this?
*/
struct intrs_and_queues {
uint16_t intr_type; /* MSI, or MSI-X */
uint16_t nirq; /* Total # of vectors */
uint16_t intr_flags_10g;/* Interrupt flags for each 10G port */
uint16_t intr_flags_1g; /* Interrupt flags for each 1G port */
uint16_t ntxq10g; /* # of NIC txq's for each 10G port */
uint16_t nrxq10g; /* # of NIC rxq's for each 10G port */
uint16_t ntxq1g; /* # of NIC txq's for each 1G port */
uint16_t nrxq1g; /* # of NIC rxq's for each 1G port */
};
struct {
uint16_t device;
char *desc;
} t4vf_pciids[] = {
{0x4800, "Chelsio T440-dbg VF"},
{0x4801, "Chelsio T420-CR VF"},
{0x4802, "Chelsio T422-CR VF"},
{0x4803, "Chelsio T440-CR VF"},
{0x4804, "Chelsio T420-BCH VF"},
{0x4805, "Chelsio T440-BCH VF"},
{0x4806, "Chelsio T440-CH VF"},
{0x4807, "Chelsio T420-SO VF"},
{0x4808, "Chelsio T420-CX VF"},
{0x4809, "Chelsio T420-BT VF"},
{0x480a, "Chelsio T404-BT VF"},
{0x480e, "Chelsio T440-LP-CR VF"},
}, t5vf_pciids[] = {
{0x5800, "Chelsio T580-dbg VF"},
{0x5801, "Chelsio T520-CR VF"}, /* 2 x 10G */
{0x5802, "Chelsio T522-CR VF"}, /* 2 x 10G, 2 X 1G */
{0x5803, "Chelsio T540-CR VF"}, /* 4 x 10G */
{0x5807, "Chelsio T520-SO VF"}, /* 2 x 10G, nomem */
{0x5809, "Chelsio T520-BT VF"}, /* 2 x 10GBaseT */
{0x580a, "Chelsio T504-BT VF"}, /* 4 x 1G */
{0x580d, "Chelsio T580-CR VF"}, /* 2 x 40G */
{0x580e, "Chelsio T540-LP-CR VF"}, /* 4 x 10G */
{0x5810, "Chelsio T580-LP-CR VF"}, /* 2 x 40G */
{0x5811, "Chelsio T520-LL-CR VF"}, /* 2 x 10G */
{0x5812, "Chelsio T560-CR VF"}, /* 1 x 40G, 2 x 10G */
{0x5814, "Chelsio T580-LP-SO-CR VF"}, /* 2 x 40G, nomem */
{0x5815, "Chelsio T502-BT VF"}, /* 2 x 1G */
#ifdef notyet
{0x5804, "Chelsio T520-BCH VF"},
{0x5805, "Chelsio T540-BCH VF"},
{0x5806, "Chelsio T540-CH VF"},
{0x5808, "Chelsio T520-CX VF"},
{0x580b, "Chelsio B520-SR VF"},
{0x580c, "Chelsio B504-BT VF"},
{0x580f, "Chelsio Amsterdam VF"},
{0x5813, "Chelsio T580-CHR VF"},
#endif
}, t6vf_pciids[] = {
{0x6801, "Chelsio T6225-CR VF"}, /* 2 x 10/25G */
{0x6802, "Chelsio T6225-SO-CR VF"}, /* 2 x 10/25G, nomem */
{0x6807, "Chelsio T62100-LP-CR VF"}, /* 2 x 40/50/100G */
{0x6808, "Chelsio T62100-SO-CR VF"}, /* 2 x 40/50/100G, nomem */
{0x680d, "Chelsio T62100-CR VF"}, /* 2 x 40/50/100G */
};
static d_ioctl_t t4vf_ioctl;
static struct cdevsw t4vf_cdevsw = {
.d_version = D_VERSION,
.d_ioctl = t4vf_ioctl,
.d_name = "t4vf",
};
static int
t4vf_probe(device_t dev)
{
uint16_t d;
size_t i;
d = pci_get_device(dev);
for (i = 0; i < nitems(t4vf_pciids); i++) {
if (d == t4vf_pciids[i].device) {
device_set_desc(dev, t4vf_pciids[i].desc);
return (BUS_PROBE_DEFAULT);
}
}
return (ENXIO);
}
static int
t5vf_probe(device_t dev)
{
uint16_t d;
size_t i;
d = pci_get_device(dev);
for (i = 0; i < nitems(t5vf_pciids); i++) {
if (d == t5vf_pciids[i].device) {
device_set_desc(dev, t5vf_pciids[i].desc);
return (BUS_PROBE_DEFAULT);
}
}
return (ENXIO);
}
static int
t6vf_probe(device_t dev)
{
uint16_t d;
size_t i;
d = pci_get_device(dev);
for (i = 0; i < nitems(t6vf_pciids); i++) {
if (d == t6vf_pciids[i].device) {
device_set_desc(dev, t6vf_pciids[i].desc);
return (BUS_PROBE_DEFAULT);
}
}
return (ENXIO);
}
#define FW_PARAM_DEV(param) \
(V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | \
V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_##param))
#define FW_PARAM_PFVF(param) \
(V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_PFVF) | \
V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_PFVF_##param))
static int
get_params__pre_init(struct adapter *sc)
{
int rc;
uint32_t param[3], val[3];
param[0] = FW_PARAM_DEV(FWREV);
param[1] = FW_PARAM_DEV(TPREV);
param[2] = FW_PARAM_DEV(CCLK);
rc = -t4vf_query_params(sc, nitems(param), param, val);
if (rc != 0) {
device_printf(sc->dev,
"failed to query parameters (pre_init): %d.\n", rc);
return (rc);
}
sc->params.fw_vers = val[0];
sc->params.tp_vers = val[1];
sc->params.vpd.cclk = val[2];
snprintf(sc->fw_version, sizeof(sc->fw_version), "%u.%u.%u.%u",
G_FW_HDR_FW_VER_MAJOR(sc->params.fw_vers),
G_FW_HDR_FW_VER_MINOR(sc->params.fw_vers),
G_FW_HDR_FW_VER_MICRO(sc->params.fw_vers),
G_FW_HDR_FW_VER_BUILD(sc->params.fw_vers));
snprintf(sc->tp_version, sizeof(sc->tp_version), "%u.%u.%u.%u",
G_FW_HDR_FW_VER_MAJOR(sc->params.tp_vers),
G_FW_HDR_FW_VER_MINOR(sc->params.tp_vers),
G_FW_HDR_FW_VER_MICRO(sc->params.tp_vers),
G_FW_HDR_FW_VER_BUILD(sc->params.tp_vers));
return (0);
}
static int
get_params__post_init(struct adapter *sc)
{
int rc;
rc = -t4vf_get_sge_params(sc);
if (rc != 0) {
device_printf(sc->dev,
"unable to retrieve adapter SGE parameters: %d\n", rc);
return (rc);
}
rc = -t4vf_get_rss_glb_config(sc);
if (rc != 0) {
device_printf(sc->dev,
"unable to retrieve adapter RSS parameters: %d\n", rc);
return (rc);
}
if (sc->params.rss.mode != FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL) {
device_printf(sc->dev,
"unable to operate with global RSS mode %d\n",
sc->params.rss.mode);
return (EINVAL);
}
rc = t4_read_chip_settings(sc);
if (rc != 0)
return (rc);
/*
* Grab our Virtual Interface resource allocation, extract the
* features that we're interested in and do a bit of sanity testing on
* what we discover.
*/
rc = -t4vf_get_vfres(sc);
if (rc != 0) {
device_printf(sc->dev,
"unable to get virtual interface resources: %d\n", rc);
return (rc);
}
/*
* Check for various parameter sanity issues.
*/
if (sc->params.vfres.pmask == 0) {
device_printf(sc->dev, "no port access configured/usable!\n");
return (EINVAL);
}
if (sc->params.vfres.nvi == 0) {
device_printf(sc->dev,
"no virtual interfaces configured/usable!\n");
return (EINVAL);
}
sc->params.portvec = sc->params.vfres.pmask;
return (0);
}
static int
set_params__post_init(struct adapter *sc)
{
uint32_t param, val;
/* ask for encapsulated CPLs */
param = FW_PARAM_PFVF(CPLFW4MSG_ENCAP);
val = 1;
(void)t4vf_set_params(sc, 1, &param, &val);
return (0);
}
#undef FW_PARAM_PFVF
#undef FW_PARAM_DEV
static int
cfg_itype_and_nqueues(struct adapter *sc, int n10g, int n1g,
struct intrs_and_queues *iaq)
{
struct vf_resources *vfres;
int nrxq10g, nrxq1g, nrxq;
int ntxq10g, ntxq1g, ntxq;
int itype, iq_avail, navail, rc;
/*
* Figure out the layout of queues across our VIs and ensure
* we can allocate enough interrupts for our layout.
*/
vfres = &sc->params.vfres;
bzero(iaq, sizeof(*iaq));
for (itype = INTR_MSIX; itype != 0; itype >>= 1) {
if (itype == INTR_INTX)
continue;
if (itype == INTR_MSIX)
navail = pci_msix_count(sc->dev);
else
navail = pci_msi_count(sc->dev);
if (navail == 0)
continue;
iaq->intr_type = itype;
iaq->intr_flags_10g = 0;
iaq->intr_flags_1g = 0;
/*
* XXX: The Linux driver reserves an Ingress Queue for
* forwarded interrupts when using MSI (but not MSI-X).
* It seems it just always asks for 2 interrupts and
* forwards all rxqs to the forwarded interrupt.
*
* We must reserve one IRQ for the for the firmware
* event queue.
*
* Every rxq requires an ingress queue with a free
* list and interrupts and an egress queue. Every txq
* requires an ETH egress queue.
*/
iaq->nirq = T4VF_EXTRA_INTR;
/*
* First, determine how many queues we can allocate.
* Start by finding the upper bound on rxqs from the
* limit on ingress queues.
*/
iq_avail = vfres->niqflint - iaq->nirq;
if (iq_avail < n10g + n1g) {
device_printf(sc->dev,
"Not enough ingress queues (%d) for %d ports\n",
vfres->niqflint, n10g + n1g);
return (ENXIO);
}
/*
* Try to honor the cap on interrupts. If there aren't
* enough interrupts for at least one interrupt per
* port, then don't bother, we will just forward all
* interrupts to one interrupt in that case.
*/
if (iaq->nirq + n10g + n1g <= navail) {
if (iq_avail > navail - iaq->nirq)
iq_avail = navail - iaq->nirq;
}
nrxq10g = t4_nrxq10g;
nrxq1g = t4_nrxq1g;
nrxq = n10g * nrxq10g + n1g * nrxq1g;
if (nrxq > iq_avail && nrxq1g > 1) {
/* Too many ingress queues. Try just 1 for 1G. */
nrxq1g = 1;
nrxq = n10g * nrxq10g + n1g * nrxq1g;
}
if (nrxq > iq_avail) {
/*
* Still too many ingress queues. Use what we
* can for each 10G port.
*/
nrxq10g = (iq_avail - n1g) / n10g;
nrxq = n10g * nrxq10g + n1g * nrxq1g;
}
KASSERT(nrxq <= iq_avail, ("too many ingress queues"));
/*
* Next, determine the upper bound on txqs from the limit
* on ETH queues.
*/
if (vfres->nethctrl < n10g + n1g) {
device_printf(sc->dev,
"Not enough ETH queues (%d) for %d ports\n",
vfres->nethctrl, n10g + n1g);
return (ENXIO);
}
ntxq10g = t4_ntxq10g;
ntxq1g = t4_ntxq1g;
ntxq = n10g * ntxq10g + n1g * ntxq1g;
if (ntxq > vfres->nethctrl) {
/* Too many ETH queues. Try just 1 for 1G. */
ntxq1g = 1;
ntxq = n10g * ntxq10g + n1g * ntxq1g;
}
if (ntxq > vfres->nethctrl) {
/*
* Still too many ETH queues. Use what we
* can for each 10G port.
*/
ntxq10g = (vfres->nethctrl - n1g) / n10g;
ntxq = n10g * ntxq10g + n1g * ntxq1g;
}
KASSERT(ntxq <= vfres->nethctrl, ("too many ETH queues"));
/*
* Finally, ensure we have enough egress queues.
*/
if (vfres->neq < (n10g + n1g) * 2) {
device_printf(sc->dev,
"Not enough egress queues (%d) for %d ports\n",
vfres->neq, n10g + n1g);
return (ENXIO);
}
if (nrxq + ntxq > vfres->neq) {
/* Just punt and use 1 for everything. */
nrxq1g = ntxq1g = nrxq10g = ntxq10g = 1;
nrxq = n10g * nrxq10g + n1g * nrxq1g;
ntxq = n10g * ntxq10g + n1g * ntxq1g;
}
KASSERT(nrxq <= iq_avail, ("too many ingress queues"));
KASSERT(ntxq <= vfres->nethctrl, ("too many ETH queues"));
KASSERT(nrxq + ntxq <= vfres->neq, ("too many egress queues"));
/*
* Do we have enough interrupts? For MSI the interrupts
* have to be a power of 2 as well.
*/
iaq->nirq += nrxq;
iaq->ntxq10g = ntxq10g;
iaq->ntxq1g = ntxq1g;
iaq->nrxq10g = nrxq10g;
iaq->nrxq1g = nrxq1g;
if (iaq->nirq <= navail &&
(itype != INTR_MSI || powerof2(iaq->nirq))) {
navail = iaq->nirq;
if (itype == INTR_MSIX)
rc = pci_alloc_msix(sc->dev, &navail);
else
rc = pci_alloc_msi(sc->dev, &navail);
if (rc != 0) {
device_printf(sc->dev,
"failed to allocate vectors:%d, type=%d, req=%d, rcvd=%d\n",
itype, rc, iaq->nirq, navail);
return (rc);
}
if (navail == iaq->nirq) {
iaq->intr_flags_10g = INTR_RXQ;
iaq->intr_flags_1g = INTR_RXQ;
return (0);
}
pci_release_msi(sc->dev);
}
/* Fall back to a single interrupt. */
iaq->nirq = 1;
navail = iaq->nirq;
if (itype == INTR_MSIX)
rc = pci_alloc_msix(sc->dev, &navail);
else
rc = pci_alloc_msi(sc->dev, &navail);
if (rc != 0)
device_printf(sc->dev,
"failed to allocate vectors:%d, type=%d, req=%d, rcvd=%d\n",
itype, rc, iaq->nirq, navail);
iaq->intr_flags_10g = 0;
iaq->intr_flags_1g = 0;
return (rc);
}
device_printf(sc->dev,
"failed to find a usable interrupt type. "
"allowed=%d, msi-x=%d, msi=%d, intx=1", t4_intr_types,
pci_msix_count(sc->dev), pci_msi_count(sc->dev));
return (ENXIO);
}
static int
t4vf_attach(device_t dev)
{
struct adapter *sc;
int rc = 0, i, j, n10g, n1g, rqidx, tqidx;
struct make_dev_args mda;
struct intrs_and_queues iaq;
struct sge *s;
sc = device_get_softc(dev);
sc->dev = dev;
pci_enable_busmaster(dev);
pci_set_max_read_req(dev, 4096);
sc->params.pci.mps = pci_get_max_payload(dev);
sc->flags |= IS_VF;
sc->sge_gts_reg = VF_SGE_REG(A_SGE_VF_GTS);
sc->sge_kdoorbell_reg = VF_SGE_REG(A_SGE_VF_KDOORBELL);
snprintf(sc->lockname, sizeof(sc->lockname), "%s",
device_get_nameunit(dev));
mtx_init(&sc->sc_lock, sc->lockname, 0, MTX_DEF);
t4_add_adapter(sc);
mtx_init(&sc->sfl_lock, "starving freelists", 0, MTX_DEF);
TAILQ_INIT(&sc->sfl);
callout_init_mtx(&sc->sfl_callout, &sc->sfl_lock, 0);
mtx_init(&sc->reg_lock, "indirect register access", 0, MTX_DEF);
rc = t4_map_bars_0_and_4(sc);
if (rc != 0)
goto done; /* error message displayed already */
rc = -t4vf_prep_adapter(sc);
if (rc != 0)
goto done;
t4_init_devnames(sc);
if (sc->names == NULL) {
rc = ENOTSUP;
goto done; /* error message displayed already */
}
/*
* Leave the 'pf' and 'mbox' values as zero. This ensures
* that various firmware messages do not set the fields which
* is the correct thing to do for a VF.
*/
memset(sc->chan_map, 0xff, sizeof(sc->chan_map));
make_dev_args_init(&mda);
mda.mda_devsw = &t4vf_cdevsw;
mda.mda_uid = UID_ROOT;
mda.mda_gid = GID_WHEEL;
mda.mda_mode = 0600;
mda.mda_si_drv1 = sc;
rc = make_dev_s(&mda, &sc->cdev, "%s", device_get_nameunit(dev));
if (rc != 0)
device_printf(dev, "failed to create nexus char device: %d.\n",
rc);
#if defined(__i386__)
if ((cpu_feature & CPUID_CX8) == 0) {
device_printf(dev, "64 bit atomics not available.\n");
rc = ENOTSUP;
goto done;
}
#endif
/*
* Some environments do not properly handle PCIE FLRs -- e.g. in Linux
* 2.6.31 and later we can't call pci_reset_function() in order to
* issue an FLR because of a self- deadlock on the device semaphore.
* Meanwhile, the OS infrastructure doesn't issue FLRs in all the
* cases where they're needed -- for instance, some versions of KVM
* fail to reset "Assigned Devices" when the VM reboots. Therefore we
* use the firmware based reset in order to reset any per function
* state.
*/
rc = -t4vf_fw_reset(sc);
if (rc != 0) {
device_printf(dev, "FW reset failed: %d\n", rc);
goto done;
}
sc->flags |= FW_OK;
/*
* Grab basic operational parameters. These will predominantly have
* been set up by the Physical Function Driver or will be hard coded
* into the adapter. We just have to live with them ... Note that
* we _must_ get our VPD parameters before our SGE parameters because
* we need to know the adapter's core clock from the VPD in order to
* properly decode the SGE Timer Values.
*/
rc = get_params__pre_init(sc);
if (rc != 0)
goto done; /* error message displayed already */
rc = get_params__post_init(sc);
if (rc != 0)
goto done; /* error message displayed already */
rc = set_params__post_init(sc);
if (rc != 0)
goto done; /* error message displayed already */
rc = t4_map_bar_2(sc);
if (rc != 0)
goto done; /* error message displayed already */
rc = t4_create_dma_tag(sc);
if (rc != 0)
goto done; /* error message displayed already */
/*
* The number of "ports" which we support is equal to the number of
* Virtual Interfaces with which we've been provisioned.
*/
sc->params.nports = imin(sc->params.vfres.nvi, MAX_NPORTS);
/*
* We may have been provisioned with more VIs than the number of
* ports we're allowed to access (our Port Access Rights Mask).
* Just use a single VI for each port.
*/
sc->params.nports = imin(sc->params.nports,
bitcount32(sc->params.vfres.pmask));
#ifdef notyet
/*
* XXX: The Linux VF driver will lower nports if it thinks there
* are too few resources in vfres (niqflint, nethctrl, neq).
*/
#endif
/*
* First pass over all the ports - allocate VIs and initialize some
* basic parameters like mac address, port type, etc. We also figure
* out whether a port is 10G or 1G and use that information when
* calculating how many interrupts to attempt to allocate.
*/
n10g = n1g = 0;
for_each_port(sc, i) {
struct port_info *pi;
pi = malloc(sizeof(*pi), M_CXGBE, M_ZERO | M_WAITOK);
sc->port[i] = pi;
/* These must be set before t4_port_init */
pi->adapter = sc;
pi->port_id = i;
pi->nvi = 1;
pi->vi = malloc(sizeof(struct vi_info) * pi->nvi, M_CXGBE,
M_ZERO | M_WAITOK);
/*
* Allocate the "main" VI and initialize parameters
* like mac addr.
*/
rc = -t4_port_init(sc, sc->mbox, sc->pf, 0, i);
if (rc != 0) {
device_printf(dev, "unable to initialize port %d: %d\n",
i, rc);
free(pi->vi, M_CXGBE);
free(pi, M_CXGBE);
sc->port[i] = NULL;
goto done;
}
/* No t4_link_start. */
snprintf(pi->lockname, sizeof(pi->lockname), "%sp%d",
device_get_nameunit(dev), i);
mtx_init(&pi->pi_lock, pi->lockname, 0, MTX_DEF);
sc->chan_map[pi->tx_chan] = i;
pi->tc = malloc(sizeof(struct tx_sched_class) *
sc->chip_params->nsched_cls, M_CXGBE, M_ZERO | M_WAITOK);
if (port_top_speed(pi) >= 10) {
n10g++;
} else {
n1g++;
}
pi->linkdnrc = -1;
pi->dev = device_add_child(dev, sc->names->vf_ifnet_name, -1);
if (pi->dev == NULL) {
device_printf(dev,
"failed to add device for port %d.\n", i);
rc = ENXIO;
goto done;
}
pi->vi[0].dev = pi->dev;
device_set_softc(pi->dev, pi);
}
/*
* Interrupt type, # of interrupts, # of rx/tx queues, etc.
*/
rc = cfg_itype_and_nqueues(sc, n10g, n1g, &iaq);
if (rc != 0)
goto done; /* error message displayed already */
sc->intr_type = iaq.intr_type;
sc->intr_count = iaq.nirq;
s = &sc->sge;
s->nrxq = n10g * iaq.nrxq10g + n1g * iaq.nrxq1g;
s->ntxq = n10g * iaq.ntxq10g + n1g * iaq.ntxq1g;
s->neq = s->ntxq + s->nrxq; /* the free list in an rxq is an eq */
s->neq += sc->params.nports + 1;/* ctrl queues: 1 per port + 1 mgmt */
s->niq = s->nrxq + 1; /* 1 extra for firmware event queue */
s->rxq = malloc(s->nrxq * sizeof(struct sge_rxq), M_CXGBE,
M_ZERO | M_WAITOK);
s->txq = malloc(s->ntxq * sizeof(struct sge_txq), M_CXGBE,
M_ZERO | M_WAITOK);
s->iqmap = malloc(s->niq * sizeof(struct sge_iq *), M_CXGBE,
M_ZERO | M_WAITOK);
s->eqmap = malloc(s->neq * sizeof(struct sge_eq *), M_CXGBE,
M_ZERO | M_WAITOK);
sc->irq = malloc(sc->intr_count * sizeof(struct irq), M_CXGBE,
M_ZERO | M_WAITOK);
/*
* Second pass over the ports. This time we know the number of rx and
* tx queues that each port should get.
*/
rqidx = tqidx = 0;
for_each_port(sc, i) {
struct port_info *pi = sc->port[i];
struct vi_info *vi;
if (pi == NULL)
continue;
for_each_vi(pi, j, vi) {
vi->pi = pi;
vi->qsize_rxq = t4_qsize_rxq;
vi->qsize_txq = t4_qsize_txq;
vi->first_rxq = rqidx;
vi->first_txq = tqidx;
if (port_top_speed(pi) >= 10) {
vi->tmr_idx = t4_tmr_idx_10g;
vi->pktc_idx = t4_pktc_idx_10g;
vi->flags |= iaq.intr_flags_10g & INTR_RXQ;
vi->nrxq = j == 0 ? iaq.nrxq10g : 1;
vi->ntxq = j == 0 ? iaq.ntxq10g : 1;
} else {
vi->tmr_idx = t4_tmr_idx_1g;
vi->pktc_idx = t4_pktc_idx_1g;
vi->flags |= iaq.intr_flags_1g & INTR_RXQ;
vi->nrxq = j == 0 ? iaq.nrxq1g : 1;
vi->ntxq = j == 0 ? iaq.ntxq1g : 1;
}
rqidx += vi->nrxq;
tqidx += vi->ntxq;
vi->rsrv_noflowq = 0;
}
}
rc = t4_setup_intr_handlers(sc);
if (rc != 0) {
device_printf(dev,
"failed to setup interrupt handlers: %d\n", rc);
goto done;
}
rc = bus_generic_attach(dev);
if (rc != 0) {
device_printf(dev,
"failed to attach all child ports: %d\n", rc);
goto done;
}
device_printf(dev,
"%d ports, %d %s interrupt%s, %d eq, %d iq\n",
sc->params.nports, sc->intr_count, sc->intr_type == INTR_MSIX ?
"MSI-X" : "MSI", sc->intr_count > 1 ? "s" : "", sc->sge.neq,
sc->sge.niq);
done:
if (rc != 0)
t4_detach_common(dev);
else
t4_sysctls(sc);
return (rc);
}
static void
get_regs(struct adapter *sc, struct t4_regdump *regs, uint8_t *buf)
{
/* 0x3f is used as the revision for VFs. */
regs->version = chip_id(sc) | (0x3f << 10);
t4_get_regs(sc, buf, regs->len);
}
static void
t4_clr_vi_stats(struct adapter *sc)
{
int reg;
for (reg = A_MPS_VF_STAT_TX_VF_BCAST_BYTES_L;
reg <= A_MPS_VF_STAT_RX_VF_ERR_FRAMES_H; reg += 4)
t4_write_reg(sc, VF_MPS_REG(reg), 0);
}
static int
t4vf_ioctl(struct cdev *dev, unsigned long cmd, caddr_t data, int fflag,
struct thread *td)
{
int rc;
struct adapter *sc = dev->si_drv1;
rc = priv_check(td, PRIV_DRIVER);
if (rc != 0)
return (rc);
switch (cmd) {
case CHELSIO_T4_GETREG: {
struct t4_reg *edata = (struct t4_reg *)data;
if ((edata->addr & 0x3) != 0 || edata->addr >= sc->mmio_len)
return (EFAULT);
if (edata->size == 4)
edata->val = t4_read_reg(sc, edata->addr);
else if (edata->size == 8)
edata->val = t4_read_reg64(sc, edata->addr);
else
return (EINVAL);
break;
}
case CHELSIO_T4_SETREG: {
struct t4_reg *edata = (struct t4_reg *)data;
if ((edata->addr & 0x3) != 0 || edata->addr >= sc->mmio_len)
return (EFAULT);
if (edata->size == 4) {
if (edata->val & 0xffffffff00000000)
return (EINVAL);
t4_write_reg(sc, edata->addr, (uint32_t) edata->val);
} else if (edata->size == 8)
t4_write_reg64(sc, edata->addr, edata->val);
else
return (EINVAL);
break;
}
case CHELSIO_T4_REGDUMP: {
struct t4_regdump *regs = (struct t4_regdump *)data;
int reglen = t4_get_regs_len(sc);
uint8_t *buf;
if (regs->len < reglen) {
regs->len = reglen; /* hint to the caller */
return (ENOBUFS);
}
regs->len = reglen;
buf = malloc(reglen, M_CXGBE, M_WAITOK | M_ZERO);
get_regs(sc, regs, buf);
rc = copyout(buf, regs->data, reglen);
free(buf, M_CXGBE);
break;
}
case CHELSIO_T4_CLEAR_STATS: {
int i, v;
u_int port_id = *(uint32_t *)data;
struct port_info *pi;
struct vi_info *vi;
if (port_id >= sc->params.nports)
return (EINVAL);
pi = sc->port[port_id];
/* MAC stats */
pi->tx_parse_error = 0;
t4_clr_vi_stats(sc);
/*
* Since this command accepts a port, clear stats for
* all VIs on this port.
*/
for_each_vi(pi, v, vi) {
if (vi->flags & VI_INIT_DONE) {
struct sge_rxq *rxq;
struct sge_txq *txq;
for_each_rxq(vi, i, rxq) {
#if defined(INET) || defined(INET6)
rxq->lro.lro_queued = 0;
rxq->lro.lro_flushed = 0;
#endif
rxq->rxcsum = 0;
rxq->vlan_extraction = 0;
}
for_each_txq(vi, i, txq) {
txq->txcsum = 0;
txq->tso_wrs = 0;
txq->vlan_insertion = 0;
txq->imm_wrs = 0;
txq->sgl_wrs = 0;
txq->txpkt_wrs = 0;
txq->txpkts0_wrs = 0;
txq->txpkts1_wrs = 0;
txq->txpkts0_pkts = 0;
txq->txpkts1_pkts = 0;
mp_ring_reset_stats(txq->r);
}
}
}
break;
}
case CHELSIO_T4_SCHED_CLASS:
rc = t4_set_sched_class(sc, (struct t4_sched_params *)data);
break;
case CHELSIO_T4_SCHED_QUEUE:
rc = t4_set_sched_queue(sc, (struct t4_sched_queue *)data);
break;
default:
rc = ENOTTY;
}
return (rc);
}
static device_method_t t4vf_methods[] = {
DEVMETHOD(device_probe, t4vf_probe),
DEVMETHOD(device_attach, t4vf_attach),
DEVMETHOD(device_detach, t4_detach_common),
DEVMETHOD_END
};
static driver_t t4vf_driver = {
"t4vf",
t4vf_methods,
sizeof(struct adapter)
};
static device_method_t t5vf_methods[] = {
DEVMETHOD(device_probe, t5vf_probe),
DEVMETHOD(device_attach, t4vf_attach),
DEVMETHOD(device_detach, t4_detach_common),
DEVMETHOD_END
};
static driver_t t5vf_driver = {
"t5vf",
t5vf_methods,
sizeof(struct adapter)
};
static device_method_t t6vf_methods[] = {
DEVMETHOD(device_probe, t6vf_probe),
DEVMETHOD(device_attach, t4vf_attach),
DEVMETHOD(device_detach, t4_detach_common),
DEVMETHOD_END
};
static driver_t t6vf_driver = {
"t6vf",
t6vf_methods,
sizeof(struct adapter)
};
static driver_t cxgbev_driver = {
"cxgbev",
cxgbe_methods,
sizeof(struct port_info)
};
static driver_t cxlv_driver = {
"cxlv",
cxgbe_methods,
sizeof(struct port_info)
};
static driver_t ccv_driver = {
"ccv",
cxgbe_methods,
sizeof(struct port_info)
};
static devclass_t t4vf_devclass, t5vf_devclass, t6vf_devclass;
static devclass_t cxgbev_devclass, cxlv_devclass, ccv_devclass;
DRIVER_MODULE(t4vf, pci, t4vf_driver, t4vf_devclass, 0, 0);
MODULE_VERSION(t4vf, 1);
MODULE_DEPEND(t4vf, t4nex, 1, 1, 1);
DRIVER_MODULE(t5vf, pci, t5vf_driver, t5vf_devclass, 0, 0);
MODULE_VERSION(t5vf, 1);
MODULE_DEPEND(t5vf, t5nex, 1, 1, 1);
DRIVER_MODULE(t6vf, pci, t6vf_driver, t6vf_devclass, 0, 0);
MODULE_VERSION(t6vf, 1);
MODULE_DEPEND(t6vf, t6nex, 1, 1, 1);
DRIVER_MODULE(cxgbev, t4vf, cxgbev_driver, cxgbev_devclass, 0, 0);
MODULE_VERSION(cxgbev, 1);
DRIVER_MODULE(cxlv, t5vf, cxlv_driver, cxlv_devclass, 0, 0);
MODULE_VERSION(cxlv, 1);
DRIVER_MODULE(ccv, t6vf, ccv_driver, ccv_devclass, 0, 0);
MODULE_VERSION(ccv, 1);