..
acphy.c
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
acphyreg.h
amphy.c
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
amphyreg.h
atphy.c
- Change these drivers to take advantage and use the generic IEEE 802.3
2010-11-14 13:31:01 +00:00
atphyreg.h
axphy.c
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
bmtphy.c
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
bmtphyreg.h
The NetBSD Foundation has granted permission to remove clause 3 and 4 from
2010-03-03 17:55:51 +00:00
brgphy.c
Move the limiting of the PHY to 10/100 modes of operation due to limitations
2010-11-14 15:15:22 +00:00
brgphyreg.h
Correct definition of T2 mode bit of MRBE Message Page 5 Next Page
2010-09-08 21:08:54 +00:00
ciphy.c
o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control
2010-11-14 13:26:10 +00:00
ciphyreg.h
e1000phy.c
o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control
2010-11-14 13:26:10 +00:00
e1000phyreg.h
Add hack to pass controller specific information to phy driver.
2009-09-28 21:03:28 +00:00
exphy.c
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
gentbi.c
- Change these drivers to take advantage and use the generic IEEE 802.3
2010-11-14 13:31:01 +00:00
icsphy.c
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
icsphyreg.h
The NetBSD Foundation has granted permission to remove clause 3 and 4 from
2010-03-03 17:55:51 +00:00
inphy.c
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
inphyreg.h
ip1000phy.c
o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control
2010-11-14 13:26:10 +00:00
ip1000phyreg.h
For IP1001 PHYs, read auto-negotiation advertisement register to
2009-03-09 08:17:46 +00:00
jmphy.c
- Change these drivers to take advantage and use the generic IEEE 802.3
2010-11-14 13:31:01 +00:00
jmphyreg.h
lxtphy.c
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
lxtphyreg.h
The NetBSD Foundation has granted permission to remove clause 3 and 4 from
2010-03-03 17:55:51 +00:00
mii_physubr.c
o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control
2010-11-14 13:26:10 +00:00
mii.c
Now that all previous users of mii_phy_probe() have been converted
2010-10-15 15:46:58 +00:00
mii.h
o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control
2010-11-14 13:26:10 +00:00
miibus_if.m
miidevs
Recognize the BCM5482S.
2010-11-08 21:23:28 +00:00
miivar.h
o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control
2010-11-14 13:26:10 +00:00
mlphy.c
- Add IFM_10_2 and IFM_10_5 media via tlphy(4) only in case the respective
2010-10-24 12:51:02 +00:00
nsgphy.c
- Change these drivers to take advantage and use the generic IEEE 802.3
2010-11-14 13:31:01 +00:00
nsgphyreg.h
nsphy.c
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
nsphyreg.h
The NetBSD Foundation has granted permission to remove clause 3 and 4 from
2010-03-03 17:55:51 +00:00
nsphyter.c
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
nsphyterreg.h
The NetBSD Foundation has granted permission to remove clause 3 and 4 from
2010-03-03 17:55:51 +00:00
pnaphy.c
Take advantage of mii_phy_add_media()/mii_phy_setmedia().
2010-10-24 11:38:25 +00:00
qsphy.c
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
qsphyreg.h
The NetBSD Foundation has granted permission to remove clause 3 and 4 from
2010-03-03 17:55:51 +00:00
rgephy.c
- Change these drivers to take advantage and use the generic IEEE 802.3
2010-11-14 13:31:01 +00:00
rgephyreg.h
Add RTL8211C(L) support.
2008-07-02 08:10:18 +00:00
rlphy.c
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
rlswitch.c
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
ruephy.c
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
ruephyreg.h
smcphy.c
o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control
2010-11-14 13:26:10 +00:00
tdkphy.c
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
tdkphyreg.h
tlphy.c
- Add IFM_10_2 and IFM_10_5 media via tlphy(4) only in case the respective
2010-10-24 12:51:02 +00:00
tlphyreg.h
- Remove clause 3 and 4 from TNF licenses.
2010-09-26 22:11:41 +00:00
truephy.c
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
truephyreg.h
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit
2008-06-20 19:30:44 +00:00
ukphy_subr.c
o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control
2010-11-14 13:26:10 +00:00
ukphy.c
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
xmphy.c
Remove redundant cases and a style(9) bug.
2010-11-14 14:25:04 +00:00
xmphyreg.h