Luiz Otavio O Souza d6cf3c637e FreeBSD, historically, has always used 8-bit addresses for i2c devices ... (7-bit device address << 1), always leaving the room for the read/write bit. This commit convert ti_i2c and revert r259127 on bcm2835_bsc to make them compatible with 8-bit addresses. Previous to this commit an i2c device would have different addresses depending on the controller it was attached to (by example, when compared to any iicbb(4) based i2c controller), which was a pretty annoying behavior. Also, update the PMIC i2c address on beaglebone* DTS files to match the new address scheme. Now the userland utilities need to do the correct slave address shifting (but it is going to work with any i2c controller on the system). Discussed with: ian MFC after: 2 weeks		2014-06-03 19:24:53 +00:00
..
am335x-evm.dts
am335x.dtsi	Adds the ADC driver for TI AM3xxx SoC family.	2014-03-24 20:06:27 +00:00
bcm2835.dtsi
beaglebone-black.dts	FreeBSD, historically, has always used 8-bit addresses for i2c devices	2014-06-03 19:24:53 +00:00
beaglebone.dts	FreeBSD, historically, has always used 8-bit addresses for i2c devices	2014-06-03 19:24:53 +00:00
cubieboard2.dts	Move common device tree informations to separate dtsi files for A10 and A20 SoC.	2014-04-28 05:39:20 +00:00
cubieboard.dts	Move common device tree informations to separate dtsi files for A10 and A20 SoC.	2014-04-28 05:39:20 +00:00
db88f5182.dts
db88f5281.dts
db88f6281.dts
db78100.dts
db78460.dts
digi-ccwmx53.dts	Mark the i.MX51 and i.MX53 boards as compatible with the i.MX51 and i.MX53	2014-05-17 14:57:34 +00:00
dockstar.dts
dreamplug-1001.dts
dreamplug-1001N.dts
ea3250.dts
efikamx.dts	Mark the i.MX51 and i.MX53 boards as compatible with the i.MX51 and i.MX53	2014-05-17 14:57:34 +00:00
exynos5.dtsi	Add support for Exynos 5420 Octa - 8-core	2014-06-01 08:15:34 +00:00
exynos5250-arndale.dts	Add support for Exynos 5420 Octa - 8-core	2014-06-01 08:15:34 +00:00
exynos5250-chromebook-snow.dts	o Make keyboard-related properties to be compatible with vendor standard	2014-05-30 06:45:50 +00:00
exynos5250-chromebook-spring.dts	Reset HSIC hub during EHCI initialization. This makes devices connected	2014-05-30 07:48:55 +00:00
exynos5250.dtsi	Add support for Exynos 5420 Octa - 8-core	2014-06-01 08:15:34 +00:00
exynos5420-arndale-octa.dts	Add support for Exynos 5420 Octa - 8-core	2014-06-01 08:15:34 +00:00
exynos5420.dtsi	Add support for Exynos 5420 Octa - 8-core	2014-06-01 08:15:34 +00:00
hl201.dts	Initial cut for DTS on the hl201 board.	2014-03-08 03:22:20 +00:00
imx6.dtsi	Switch imx6 to using the mpcore per-cpu event timers, but continue to use	2014-04-02 21:06:43 +00:00
imx51x.dtsi
imx53-qsb.dts	Updates to i.MX53:	2014-04-08 04:05:04 +00:00
imx53x.dtsi	Improve the i.MX53 / Digi DTS:	2014-04-13 22:35:39 +00:00
p2041rdb.dts
p3041ds.dts
p5020ds.dts
pandaboard.dts	Various fixes to the ti_sdhci driver, mostly to make it work on Pandaboard.	2014-04-04 00:59:40 +00:00
rk3188-radxa-lite.dts	Add common kernel config file for Rockchip RK3188 systems by splitting	2014-05-30 06:37:06 +00:00
rk3188-radxa.dts	Switch to my freebsd.org emal address in copyright.	2014-03-25 08:31:47 +00:00
rk3188.dtsi	Silence no interrupt-parent found message during boot.	2014-05-08 00:26:21 +00:00
rpi.dts	Revert r258678. Make the led gpio-specifier match again the #gpio-cells	2014-04-27 13:10:51 +00:00
sheevaplug.dts
sun4i-a10.dtsi	Move common device tree informations to separate dtsi files for A10 and A20 SoC.	2014-04-28 05:39:20 +00:00
sun7i-a20.dtsi	Move common device tree informations to separate dtsi files for A10 and A20 SoC.	2014-04-28 05:39:20 +00:00
tegra20-paz00.dts
tegra20.dtsi
trimslice.dts
ts7800.dts
versatilepb.dts
vybrid-colibri-vf50.dts
vybrid-cosmic.dts
vybrid-quartz.dts	- Export panel info to DTS	2014-03-07 16:14:51 +00:00
vybrid.dtsi	Add driver for Port control and interrupts (PORT).	2014-03-07 07:06:36 +00:00
wandboard-dual.dts
wandboard-quad.dts
wandboard-solo.dts
zedboard.dts	Honor the max-frequency property if it appears in the fdt data.	2014-05-02 01:28:19 +00:00