freebsd-dev/sys/dev/mpt/mpt.h
Steven Hartland 85c9dd9d89 Prevent overflow issues in timeout processing
Previously, any timeout value for which (timeout * hz) will overflow the
signed integer, will give weird results, since callout(9) routines will
convert negative values of ticks to '1'. For unsigned integer overflow we
will get sufficiently smaller timeout values than expected.

Switch from callout_reset, which requires conversion to int based ticks
to callout_reset_sbt to avoid this.

Also correct isci to correctly resolve ccb timeout.

This was based on the original work done by Eygene Ryabinkin
<rea@freebsd.org> back in 5 Aug 2011 which used a macro to help avoid
the overlow.

Differential Revision:	https://reviews.freebsd.org/D1157
Reviewed by:	mav, davide
MFC after:	1 month
Sponsored by:	Multiplay
2014-11-21 21:01:24 +00:00

1149 lines
37 KiB
C

/* $FreeBSD$ */
/*-
* Generic defines for LSI '909 FC adapters.
* FreeBSD Version.
*
* Copyright (c) 2000, 2001 by Greg Ansley
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice immediately at the beginning of the file, without modification,
* this list of conditions, and the following disclaimer.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*-
* Copyright (c) 2002, 2006 by Matthew Jacob
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon including
* a substantially similar Disclaimer requirement for further binary
* redistribution.
* 3. Neither the names of the above listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
* OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Support from Chris Ellsworth in order to make SAS adapters work
* is gratefully acknowledged.
*
*
* Support from LSI-Logic has also gone a great deal toward making this a
* workable subsystem and is gratefully acknowledged.
*/
/*
* Copyright (c) 2004, Avid Technology, Inc. and its contributors.
* Copyright (c) 2004, 2005 Justin T. Gibbs
* Copyright (c) 2005, WHEEL Sp. z o.o.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon including
* a substantially similar Disclaimer requirement for further binary
* redistribution.
* 3. Neither the names of the above listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
* OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _MPT_H_
#define _MPT_H_
/********************************* OS Includes ********************************/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/condvar.h>
#include <sys/endian.h>
#include <sys/eventhandler.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/module.h>
#include <sys/mutex.h>
#include <sys/proc.h>
#include <sys/queue.h>
#include <sys/rman.h>
#include <sys/types.h>
#include <machine/bus.h>
#include <machine/cpu.h>
#include <machine/resource.h>
#ifdef __sparc64__
#include <dev/ofw/openfirm.h>
#include <machine/ofw_machdep.h>
#endif
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include "opt_ddb.h"
/**************************** Register Definitions ****************************/
#include <dev/mpt/mpt_reg.h>
/******************************* MPI Definitions ******************************/
#include <dev/mpt/mpilib/mpi_type.h>
#include <dev/mpt/mpilib/mpi.h>
#include <dev/mpt/mpilib/mpi_cnfg.h>
#include <dev/mpt/mpilib/mpi_ioc.h>
#include <dev/mpt/mpilib/mpi_raid.h>
/* XXX For mpt_debug.c */
#include <dev/mpt/mpilib/mpi_init.h>
#define MPT_S64_2_SCALAR(y) ((((int64_t)y.High) << 32) | (y.Low))
#define MPT_U64_2_SCALAR(y) ((((uint64_t)y.High) << 32) | (y.Low))
/****************************** Misc Definitions ******************************/
/* #define MPT_TEST_MULTIPATH 1 */
#define MPT_OK (0)
#define MPT_FAIL (0x10000)
#define NUM_ELEMENTS(array) (sizeof(array) / sizeof(*array))
#define MPT_ROLE_NONE 0
#define MPT_ROLE_INITIATOR 1
#define MPT_ROLE_TARGET 2
#define MPT_ROLE_BOTH 3
#define MPT_ROLE_DEFAULT MPT_ROLE_INITIATOR
#define MPT_INI_ID_NONE -1
/**************************** Forward Declarations ****************************/
struct mpt_softc;
struct mpt_personality;
typedef struct req_entry request_t;
/************************* Personality Module Support *************************/
typedef int mpt_load_handler_t(struct mpt_personality *);
typedef int mpt_probe_handler_t(struct mpt_softc *);
typedef int mpt_attach_handler_t(struct mpt_softc *);
typedef int mpt_enable_handler_t(struct mpt_softc *);
typedef void mpt_ready_handler_t(struct mpt_softc *);
typedef int mpt_event_handler_t(struct mpt_softc *, request_t *,
MSG_EVENT_NOTIFY_REPLY *);
typedef void mpt_reset_handler_t(struct mpt_softc *, int /*type*/);
/* XXX Add return value and use for veto? */
typedef void mpt_shutdown_handler_t(struct mpt_softc *);
typedef void mpt_detach_handler_t(struct mpt_softc *);
typedef int mpt_unload_handler_t(struct mpt_personality *);
struct mpt_personality
{
const char *name;
uint32_t id; /* Assigned identifier. */
u_int use_count; /* Instances using personality*/
mpt_load_handler_t *load; /* configure personailty */
#define MPT_PERS_FIRST_HANDLER(pers) (&(pers)->load)
mpt_probe_handler_t *probe; /* configure personailty */
mpt_attach_handler_t *attach; /* initialize device instance */
mpt_enable_handler_t *enable; /* enable device */
mpt_ready_handler_t *ready; /* final open for business */
mpt_event_handler_t *event; /* Handle MPI event. */
mpt_reset_handler_t *reset; /* Re-init after reset. */
mpt_shutdown_handler_t *shutdown; /* Shutdown instance. */
mpt_detach_handler_t *detach; /* release device instance */
mpt_unload_handler_t *unload; /* Shutdown personality */
#define MPT_PERS_LAST_HANDLER(pers) (&(pers)->unload)
};
int mpt_modevent(module_t, int, void *);
/* Maximum supported number of personalities. */
#define MPT_MAX_PERSONALITIES (15)
#define MPT_PERSONALITY_DEPEND(name, dep, vmin, vpref, vmax) \
MODULE_DEPEND(name, dep, vmin, vpref, vmax)
#define DECLARE_MPT_PERSONALITY(name, order) \
static moduledata_t name##_mod = { \
#name, mpt_modevent, &name##_personality \
}; \
DECLARE_MODULE(name, name##_mod, SI_SUB_DRIVERS, order); \
MODULE_VERSION(name, 1); \
MPT_PERSONALITY_DEPEND(name, mpt_core, 1, 1, 1)
/******************************* Bus DMA Support ******************************/
/* XXX Need to update bus_dmamap_sync to take a range argument. */
#define bus_dmamap_sync_range(dma_tag, dmamap, offset, len, op) \
bus_dmamap_sync(dma_tag, dmamap, op)
#define mpt_dma_tag_create(mpt, parent_tag, alignment, boundary, \
lowaddr, highaddr, filter, filterarg, \
maxsize, nsegments, maxsegsz, flags, \
dma_tagp) \
bus_dma_tag_create(parent_tag, alignment, boundary, \
lowaddr, highaddr, filter, filterarg, \
maxsize, nsegments, maxsegsz, flags, \
busdma_lock_mutex, &(mpt)->mpt_lock, \
dma_tagp)
struct mpt_map_info {
struct mpt_softc *mpt;
int error;
uint32_t phys;
};
void mpt_map_rquest(void *, bus_dma_segment_t *, int, int);
/********************************** Endianess *********************************/
#define MPT_2_HOST64(ptr, tag) ptr->tag = le64toh(ptr->tag)
#define MPT_2_HOST32(ptr, tag) ptr->tag = le32toh(ptr->tag)
#define MPT_2_HOST16(ptr, tag) ptr->tag = le16toh(ptr->tag)
#define HOST_2_MPT64(ptr, tag) ptr->tag = htole64(ptr->tag)
#define HOST_2_MPT32(ptr, tag) ptr->tag = htole32(ptr->tag)
#define HOST_2_MPT16(ptr, tag) ptr->tag = htole16(ptr->tag)
#if _BYTE_ORDER == _BIG_ENDIAN
void mpt2host_sge_simple_union(SGE_SIMPLE_UNION *);
void mpt2host_iocfacts_reply(MSG_IOC_FACTS_REPLY *);
void mpt2host_portfacts_reply(MSG_PORT_FACTS_REPLY *);
void mpt2host_config_page_ioc2(CONFIG_PAGE_IOC_2 *);
void mpt2host_config_page_ioc3(CONFIG_PAGE_IOC_3 *);
void mpt2host_config_page_scsi_port_0(CONFIG_PAGE_SCSI_PORT_0 *);
void mpt2host_config_page_scsi_port_1(CONFIG_PAGE_SCSI_PORT_1 *);
void host2mpt_config_page_scsi_port_1(CONFIG_PAGE_SCSI_PORT_1 *);
void mpt2host_config_page_scsi_port_2(CONFIG_PAGE_SCSI_PORT_2 *);
void mpt2host_config_page_scsi_device_0(CONFIG_PAGE_SCSI_DEVICE_0 *);
void mpt2host_config_page_scsi_device_1(CONFIG_PAGE_SCSI_DEVICE_1 *);
void host2mpt_config_page_scsi_device_1(CONFIG_PAGE_SCSI_DEVICE_1 *);
void mpt2host_config_page_fc_port_0(CONFIG_PAGE_FC_PORT_0 *);
void mpt2host_config_page_fc_port_1(CONFIG_PAGE_FC_PORT_1 *);
void host2mpt_config_page_fc_port_1(CONFIG_PAGE_FC_PORT_1 *);
void mpt2host_config_page_raid_vol_0(CONFIG_PAGE_RAID_VOL_0 *);
void mpt2host_config_page_raid_phys_disk_0(CONFIG_PAGE_RAID_PHYS_DISK_0 *);
void mpt2host_mpi_raid_vol_indicator(MPI_RAID_VOL_INDICATOR *);
#else
#define mpt2host_sge_simple_union(x) do { ; } while (0)
#define mpt2host_iocfacts_reply(x) do { ; } while (0)
#define mpt2host_portfacts_reply(x) do { ; } while (0)
#define mpt2host_config_page_ioc2(x) do { ; } while (0)
#define mpt2host_config_page_ioc3(x) do { ; } while (0)
#define mpt2host_config_page_scsi_port_0(x) do { ; } while (0)
#define mpt2host_config_page_scsi_port_1(x) do { ; } while (0)
#define host2mpt_config_page_scsi_port_1(x) do { ; } while (0)
#define mpt2host_config_page_scsi_port_2(x) do { ; } while (0)
#define mpt2host_config_page_scsi_device_0(x) do { ; } while (0)
#define mpt2host_config_page_scsi_device_1(x) do { ; } while (0)
#define host2mpt_config_page_scsi_device_1(x) do { ; } while (0)
#define mpt2host_config_page_fc_port_0(x) do { ; } while (0)
#define mpt2host_config_page_fc_port_1(x) do { ; } while (0)
#define host2mpt_config_page_fc_port_1(x) do { ; } while (0)
#define mpt2host_config_page_raid_vol_0(x) do { ; } while (0)
#define mpt2host_config_page_raid_phys_disk_0(x) \
do { ; } while (0)
#define mpt2host_mpi_raid_vol_indicator(x) do { ; } while (0)
#endif
/**************************** MPI Transaction State ***************************/
typedef enum {
REQ_STATE_NIL = 0x00,
REQ_STATE_FREE = 0x01,
REQ_STATE_ALLOCATED = 0x02,
REQ_STATE_QUEUED = 0x04,
REQ_STATE_DONE = 0x08,
REQ_STATE_TIMEDOUT = 0x10,
REQ_STATE_NEED_WAKEUP = 0x20,
REQ_STATE_LOCKED = 0x80, /* can't be freed */
REQ_STATE_MASK = 0xFF
} mpt_req_state_t;
struct req_entry {
TAILQ_ENTRY(req_entry) links; /* Pointer to next in list */
mpt_req_state_t state; /* Request State Information */
uint16_t index; /* Index of this entry */
uint16_t IOCStatus; /* Completion status */
uint16_t ResponseCode; /* TMF Response Code */
uint16_t serno; /* serial number */
union ccb *ccb; /* CAM request */
void *req_vbuf; /* Virtual Address of Entry */
void *sense_vbuf; /* Virtual Address of sense data */
bus_addr_t req_pbuf; /* Physical Address of Entry */
bus_addr_t sense_pbuf; /* Physical Address of sense data */
bus_dmamap_t dmap; /* DMA map for data buffers */
struct req_entry *chain; /* for SGE overallocations */
struct callout callout; /* Timeout for the request */
};
typedef struct mpt_config_params {
u_int Action;
u_int PageVersion;
u_int PageLength;
u_int PageNumber;
u_int PageType;
u_int PageAddress;
u_int ExtPageLength;
u_int ExtPageType;
} cfgparms_t;
/**************************** MPI Target State Info ***************************/
typedef struct {
uint32_t reply_desc; /* current reply descriptor */
uint32_t resid; /* current data residual */
uint32_t bytes_xfered; /* current relative offset */
union ccb *ccb; /* pointer to currently active ccb */
request_t *req; /* pointer to currently active assist request */
uint32_t
is_local : 1,
nxfers : 31;
uint32_t tag_id;
enum {
TGT_STATE_NIL,
TGT_STATE_LOADING,
TGT_STATE_LOADED,
TGT_STATE_IN_CAM,
TGT_STATE_SETTING_UP_FOR_DATA,
TGT_STATE_MOVING_DATA,
TGT_STATE_MOVING_DATA_AND_STATUS,
TGT_STATE_SENDING_STATUS
} state;
} mpt_tgt_state_t;
/*
* When we get an incoming command it has its own tag which is called the
* IoIndex. This is the value we gave that particular command buffer when
* we originally assigned it. It's just a number, really. The FC card uses
* it as an RX_ID. We can use it to index into mpt->tgt_cmd_ptrs, which
* contains pointers the request_t structures related to that IoIndex.
*
* What *we* do is construct a tag out of the index for the target command
* which owns the incoming ATIO plus a rolling sequence number.
*/
#define MPT_MAKE_TAGID(mpt, req, ioindex) \
((ioindex << 18) | (((mpt->sequence++) & 0x3f) << 12) | (req->index & 0xfff))
#ifdef INVARIANTS
#define MPT_TAG_2_REQ(a, b) mpt_tag_2_req(a, (uint32_t) b)
#else
#define MPT_TAG_2_REQ(mpt, tag) mpt->tgt_cmd_ptrs[tag >> 18]
#endif
#define MPT_TGT_STATE(mpt, req) ((mpt_tgt_state_t *) \
(&((uint8_t *)req->req_vbuf)[MPT_RQSL(mpt) - sizeof (mpt_tgt_state_t)]))
STAILQ_HEAD(mpt_hdr_stailq, ccb_hdr);
#define MPT_MAX_LUNS 256
typedef struct {
struct mpt_hdr_stailq atios;
struct mpt_hdr_stailq inots;
int enabled;
} tgt_resource_t;
#define MPT_MAX_ELS 64
/**************************** Handler Registration ****************************/
/*
* Global table of registered reply handlers. The
* handler is indicated by byte 3 of the request
* index submitted to the IOC. This allows the
* driver core to perform generic processing without
* any knowledge of per-personality behavior.
*
* MPT_NUM_REPLY_HANDLERS must be a power of 2
* to allow the easy generation of a mask.
*
* The handler offsets used by the core are hard coded
* allowing faster code generation when assigning a handler
* to a request. All "personalities" must use the
* the handler registration mechanism.
*
* The IOC handlers that are rarely executed are placed
* at the tail of the table to make it more likely that
* all commonly executed handlers fit in a single cache
* line.
*/
#define MPT_NUM_REPLY_HANDLERS (32)
#define MPT_REPLY_HANDLER_EVENTS MPT_CBI_TO_HID(0)
#define MPT_REPLY_HANDLER_CONFIG MPT_CBI_TO_HID(MPT_NUM_REPLY_HANDLERS-1)
#define MPT_REPLY_HANDLER_HANDSHAKE MPT_CBI_TO_HID(MPT_NUM_REPLY_HANDLERS-2)
typedef int mpt_reply_handler_t(struct mpt_softc *mpt, request_t *request,
uint32_t reply_desc, MSG_DEFAULT_REPLY *reply_frame);
typedef union {
mpt_reply_handler_t *reply_handler;
} mpt_handler_t;
typedef enum {
MPT_HANDLER_REPLY,
MPT_HANDLER_EVENT,
MPT_HANDLER_RESET,
MPT_HANDLER_SHUTDOWN
} mpt_handler_type;
struct mpt_handler_record
{
LIST_ENTRY(mpt_handler_record) links;
mpt_handler_t handler;
};
LIST_HEAD(mpt_handler_list, mpt_handler_record);
/*
* The handler_id is currently unused but would contain the
* handler ID used in the MsgContext field to allow direction
* of replies to the handler. Registrations that don't require
* a handler id can pass in NULL for the handler_id.
*
* Deregistrations for handlers without a handler id should
* pass in MPT_HANDLER_ID_NONE.
*/
#define MPT_HANDLER_ID_NONE (0xFFFFFFFF)
int mpt_register_handler(struct mpt_softc *, mpt_handler_type,
mpt_handler_t, uint32_t *);
int mpt_deregister_handler(struct mpt_softc *, mpt_handler_type,
mpt_handler_t, uint32_t);
/******************* Per-Controller Instance Data Structures ******************/
TAILQ_HEAD(req_queue, req_entry);
/* Structure for saving proper values for modifyable PCI config registers */
struct mpt_pci_cfg {
uint16_t Command;
uint16_t LatencyTimer_LineSize;
uint32_t IO_BAR;
uint32_t Mem0_BAR[2];
uint32_t Mem1_BAR[2];
uint32_t ROM_BAR;
uint8_t IntLine;
uint32_t PMCSR;
};
typedef enum {
MPT_RVF_NONE = 0x0,
MPT_RVF_ACTIVE = 0x1,
MPT_RVF_ANNOUNCED = 0x2,
MPT_RVF_UP2DATE = 0x4,
MPT_RVF_REFERENCED = 0x8,
MPT_RVF_WCE_CHANGED = 0x10
} mpt_raid_volume_flags;
struct mpt_raid_volume {
CONFIG_PAGE_RAID_VOL_0 *config_page;
MPI_RAID_VOL_INDICATOR sync_progress;
mpt_raid_volume_flags flags;
u_int quiesced_disks;
};
typedef enum {
MPT_RDF_NONE = 0x00,
MPT_RDF_ACTIVE = 0x01,
MPT_RDF_ANNOUNCED = 0x02,
MPT_RDF_UP2DATE = 0x04,
MPT_RDF_REFERENCED = 0x08,
MPT_RDF_QUIESCING = 0x10,
MPT_RDF_QUIESCED = 0x20
} mpt_raid_disk_flags;
struct mpt_raid_disk {
CONFIG_PAGE_RAID_PHYS_DISK_0 config_page;
struct mpt_raid_volume *volume;
u_int member_number;
u_int pass_thru_active;
mpt_raid_disk_flags flags;
};
struct mpt_evtf_record {
MSG_EVENT_NOTIFY_REPLY reply;
uint32_t context;
LIST_ENTRY(mpt_evtf_record) links;
};
LIST_HEAD(mpt_evtf_list, mpt_evtf_record);
struct mptsas_devinfo {
uint16_t dev_handle;
uint16_t parent_dev_handle;
uint16_t enclosure_handle;
uint16_t slot;
uint8_t phy_num;
uint8_t physical_port;
uint8_t target_id;
uint8_t bus;
uint64_t sas_address;
uint32_t device_info;
};
struct mptsas_phyinfo {
uint16_t handle;
uint8_t phy_num;
uint8_t port_id;
uint8_t negotiated_link_rate;
uint8_t hw_link_rate;
uint8_t programmed_link_rate;
uint8_t sas_port_add_phy;
struct mptsas_devinfo identify;
struct mptsas_devinfo attached;
};
struct mptsas_portinfo {
uint16_t num_phys;
struct mptsas_phyinfo *phy_info;
};
struct mpt_softc {
device_t dev;
struct mtx mpt_lock;
int mpt_locksetup;
uint32_t mpt_pers_mask;
uint32_t
: 7,
unit : 8,
ready : 1,
fw_uploaded : 1,
msi_enable : 1,
twildcard : 1,
tenabled : 1,
do_cfg_role : 1,
raid_enabled : 1,
raid_mwce_set : 1,
getreqwaiter : 1,
shutdwn_raid : 1,
shutdwn_recovery: 1,
outofbeer : 1,
disabled : 1,
is_spi : 1,
is_sas : 1,
is_fc : 1,
is_1078 : 1;
u_int cfg_role;
u_int role; /* role: none, ini, target, both */
u_int verbose;
#ifdef MPT_TEST_MULTIPATH
int failure_id;
#endif
/*
* IOC Facts
*/
MSG_IOC_FACTS_REPLY ioc_facts;
/*
* Port Facts
*/
MSG_PORT_FACTS_REPLY * port_facts;
#define mpt_max_tgtcmds port_facts[0].MaxPostedCmdBuffers
/*
* Device Configuration Information
*/
union {
struct mpt_spi_cfg {
CONFIG_PAGE_SCSI_PORT_0 _port_page0;
CONFIG_PAGE_SCSI_PORT_1 _port_page1;
CONFIG_PAGE_SCSI_PORT_2 _port_page2;
CONFIG_PAGE_SCSI_DEVICE_0 _dev_page0[16];
CONFIG_PAGE_SCSI_DEVICE_1 _dev_page1[16];
int _ini_id;
uint16_t _tag_enable;
uint16_t _disc_enable;
} spi;
#define mpt_port_page0 cfg.spi._port_page0
#define mpt_port_page1 cfg.spi._port_page1
#define mpt_port_page2 cfg.spi._port_page2
#define mpt_dev_page0 cfg.spi._dev_page0
#define mpt_dev_page1 cfg.spi._dev_page1
#define mpt_ini_id cfg.spi._ini_id
#define mpt_tag_enable cfg.spi._tag_enable
#define mpt_disc_enable cfg.spi._disc_enable
struct mpi_fc_cfg {
CONFIG_PAGE_FC_PORT_0 _port_page0;
uint32_t _port_speed;
#define mpt_fcport_page0 cfg.fc._port_page0
#define mpt_fcport_speed cfg.fc._port_speed
} fc;
} cfg;
/*
* Device config information stored up for sysctl to access
*/
union {
struct {
unsigned int initiator_id;
} spi;
struct {
char wwnn[19];
char wwpn[19];
} fc;
} scinfo;
/* Controller Info for RAID information */
CONFIG_PAGE_IOC_2 * ioc_page2;
CONFIG_PAGE_IOC_3 * ioc_page3;
/* Raid Data */
struct mpt_raid_volume* raid_volumes;
struct mpt_raid_disk* raid_disks;
u_int raid_max_volumes;
u_int raid_max_disks;
u_int raid_page0_len;
u_int raid_wakeup;
u_int raid_rescan;
u_int raid_resync_rate;
u_int raid_mwce_setting;
u_int raid_queue_depth;
u_int raid_nonopt_volumes;
struct proc *raid_thread;
struct callout raid_timer;
/*
* PCI Hardware info
*/
struct resource * pci_irq; /* Interrupt map for chip */
void * ih; /* Interrupt handle */
#if 0
struct mpt_pci_cfg pci_cfg; /* saved PCI conf registers */
#endif
/*
* DMA Mapping Stuff
*/
struct resource * pci_reg; /* Register map for chip */
bus_space_tag_t pci_st; /* Bus tag for registers */
bus_space_handle_t pci_sh; /* Bus handle for registers */
/* PIO versions of above. */
struct resource * pci_pio_reg;
bus_space_tag_t pci_pio_st;
bus_space_handle_t pci_pio_sh;
bus_dma_tag_t parent_dmat; /* DMA tag for parent PCI bus */
bus_dma_tag_t reply_dmat; /* DMA tag for reply memory */
bus_dmamap_t reply_dmap; /* DMA map for reply memory */
uint8_t *reply; /* KVA of reply memory */
bus_addr_t reply_phys; /* BusAddr of reply memory */
bus_dma_tag_t buffer_dmat; /* DMA tag for buffers */
bus_dma_tag_t request_dmat; /* DMA tag for request memroy */
bus_dmamap_t request_dmap; /* DMA map for request memroy */
uint8_t *request; /* KVA of Request memory */
bus_addr_t request_phys; /* BusAddr of request memory */
uint32_t max_seg_cnt; /* calculated after IOC facts */
uint32_t max_cam_seg_cnt;/* calculated from MAXPHYS*/
/*
* Hardware management
*/
u_int reset_cnt;
/*
* CAM && Software Management
*/
request_t *request_pool;
struct req_queue request_free_list;
struct req_queue request_pending_list;
struct req_queue request_timeout_list;
struct cam_sim *sim;
struct cam_path *path;
struct cam_sim *phydisk_sim;
struct cam_path *phydisk_path;
struct proc *recovery_thread;
request_t *tmf_req;
/*
* Deferred frame acks due to resource shortage.
*/
struct mpt_evtf_list ack_frames;
/*
* Target Mode Support
*/
uint32_t scsi_tgt_handler_id;
request_t ** tgt_cmd_ptrs;
request_t ** els_cmd_ptrs; /* FC only */
/*
* *snork*- this is chosen to be here *just in case* somebody
* forgets to point to it exactly and we index off of trt with
* CAM_LUN_WILDCARD.
*/
tgt_resource_t trt_wildcard; /* wildcard luns */
tgt_resource_t trt[MPT_MAX_LUNS];
uint16_t tgt_cmds_allocated;
uint16_t els_cmds_allocated; /* FC only */
uint16_t timeouts; /* timeout count */
uint16_t success; /* successes afer timeout */
uint16_t sequence; /* Sequence Number */
uint16_t pad3;
#if 0
/* Paired port in some dual adapters configurations */
struct mpt_softc * mpt2;
#endif
/* FW Image management */
uint32_t fw_image_size;
uint8_t *fw_image;
bus_dma_tag_t fw_dmat; /* DMA tag for firmware image */
bus_dmamap_t fw_dmap; /* DMA map for firmware image */
bus_addr_t fw_phys; /* BusAddr of firmware image */
/* SAS Topology */
struct mptsas_portinfo *sas_portinfo;
/* Shutdown Event Handler. */
eventhandler_tag eh;
/* Userland management interface. */
struct cdev *cdev;
TAILQ_ENTRY(mpt_softc) links;
};
static __inline void mpt_assign_serno(struct mpt_softc *, request_t *);
static __inline void
mpt_assign_serno(struct mpt_softc *mpt, request_t *req)
{
if ((req->serno = mpt->sequence++) == 0) {
req->serno = mpt->sequence++;
}
}
/***************************** Locking Primitives *****************************/
#define MPT_IFLAGS INTR_TYPE_CAM | INTR_ENTROPY | INTR_MPSAFE
#define MPT_LOCK_SETUP(mpt) \
mtx_init(&mpt->mpt_lock, "mpt", NULL, MTX_DEF); \
mpt->mpt_locksetup = 1
#define MPT_LOCK_DESTROY(mpt) \
if (mpt->mpt_locksetup) { \
mtx_destroy(&mpt->mpt_lock); \
mpt->mpt_locksetup = 0; \
}
#define MPT_LOCK(mpt) mtx_lock(&(mpt)->mpt_lock)
#define MPT_UNLOCK(mpt) mtx_unlock(&(mpt)->mpt_lock)
#define MPT_OWNED(mpt) mtx_owned(&(mpt)->mpt_lock)
#define MPT_LOCK_ASSERT(mpt) mtx_assert(&(mpt)->mpt_lock, MA_OWNED)
#define mpt_sleep(mpt, ident, priority, wmesg, sbt) \
msleep_sbt(ident, &(mpt)->mpt_lock, priority, wmesg, sbt, 0, 0)
#define mpt_req_timeout(req, sbt, func, arg) \
callout_reset_sbt(&(req)->callout, (sbt), 0, (func), (arg), 0)
#define mpt_req_untimeout(req, func, arg) \
callout_stop(&(req)->callout)
#define mpt_callout_init(mpt, c) \
callout_init_mtx(c, &(mpt)->mpt_lock, 0)
#define mpt_callout_drain(mpt, c) \
callout_drain(c)
/******************************* Register Access ******************************/
static __inline void mpt_write(struct mpt_softc *, size_t, uint32_t);
static __inline uint32_t mpt_read(struct mpt_softc *, int);
static __inline void mpt_pio_write(struct mpt_softc *, size_t, uint32_t);
static __inline uint32_t mpt_pio_read(struct mpt_softc *, int);
static __inline void
mpt_write(struct mpt_softc *mpt, size_t offset, uint32_t val)
{
bus_space_write_4(mpt->pci_st, mpt->pci_sh, offset, val);
}
static __inline uint32_t
mpt_read(struct mpt_softc *mpt, int offset)
{
return (bus_space_read_4(mpt->pci_st, mpt->pci_sh, offset));
}
/*
* Some operations (e.g. diagnostic register writes while the ARM proccessor
* is disabled), must be performed using "PCI pio" operations. On non-PCI
* busses, these operations likely map to normal register accesses.
*/
static __inline void
mpt_pio_write(struct mpt_softc *mpt, size_t offset, uint32_t val)
{
KASSERT(mpt->pci_pio_reg != NULL, ("no PIO resource"));
bus_space_write_4(mpt->pci_pio_st, mpt->pci_pio_sh, offset, val);
}
static __inline uint32_t
mpt_pio_read(struct mpt_softc *mpt, int offset)
{
KASSERT(mpt->pci_pio_reg != NULL, ("no PIO resource"));
return (bus_space_read_4(mpt->pci_pio_st, mpt->pci_pio_sh, offset));
}
/*********************** Reply Frame/Request Management ***********************/
/* Max MPT Reply we are willing to accept (must be power of 2) */
#define MPT_REPLY_SIZE 256
/*
* Must be less than 16384 in order for target mode to work
*/
#define MPT_MAX_REQUESTS(mpt) 512
#define MPT_REQUEST_AREA 512
#define MPT_SENSE_SIZE 32 /* included in MPT_REQUEST_AREA */
#define MPT_REQ_MEM_SIZE(mpt) (MPT_MAX_REQUESTS(mpt) * MPT_REQUEST_AREA)
#define MPT_CONTEXT_CB_SHIFT (16)
#define MPT_CBI(handle) (handle >> MPT_CONTEXT_CB_SHIFT)
#define MPT_CBI_TO_HID(cbi) ((cbi) << MPT_CONTEXT_CB_SHIFT)
#define MPT_CONTEXT_TO_CBI(x) \
(((x) >> MPT_CONTEXT_CB_SHIFT) & (MPT_NUM_REPLY_HANDLERS - 1))
#define MPT_CONTEXT_REQI_MASK 0xFFFF
#define MPT_CONTEXT_TO_REQI(x) ((x) & MPT_CONTEXT_REQI_MASK)
/*
* Convert a 32bit physical address returned from IOC to an
* offset into our reply frame memory or the kvm address needed
* to access the data. The returned address is only the low
* 32 bits, so mask our base physical address accordingly.
*/
#define MPT_REPLY_BADDR(x) \
(x << 1)
#define MPT_REPLY_OTOV(m, i) \
((void *)(&m->reply[i]))
#define MPT_DUMP_REPLY_FRAME(mpt, reply_frame) \
do { \
if (mpt->verbose > MPT_PRT_DEBUG) \
mpt_dump_reply_frame(mpt, reply_frame); \
} while(0)
static __inline uint32_t mpt_pop_reply_queue(struct mpt_softc *mpt);
static __inline void mpt_free_reply(struct mpt_softc *mpt, uint32_t ptr);
/*
* Give the reply buffer back to the IOC after we have
* finished processing it.
*/
static __inline void
mpt_free_reply(struct mpt_softc *mpt, uint32_t ptr)
{
mpt_write(mpt, MPT_OFFSET_REPLY_Q, ptr);
}
/* Get a reply from the IOC */
static __inline uint32_t
mpt_pop_reply_queue(struct mpt_softc *mpt)
{
return mpt_read(mpt, MPT_OFFSET_REPLY_Q);
}
void
mpt_complete_request_chain(struct mpt_softc *, struct req_queue *, u_int);
/************************** Scatter Gather Management **************************/
/* MPT_RQSL- size of request frame, in bytes */
#define MPT_RQSL(mpt) (mpt->ioc_facts.RequestFrameSize << 2)
/* MPT_NSGL- how many SG entries can fit in a request frame size */
#define MPT_NSGL(mpt) (MPT_RQSL(mpt) / sizeof (SGE_IO_UNION))
/* MPT_NRFM- how many request frames can fit in each request alloc we make */
#define MPT_NRFM(mpt) (MPT_REQUEST_AREA / MPT_RQSL(mpt))
/*
* MPT_NSGL_FIRST- # of SG elements that can fit after
* an I/O request but still within the request frame.
* Do this safely based upon SGE_IO_UNION.
*
* Note that the first element is *within* the SCSI request.
*/
#define MPT_NSGL_FIRST(mpt) \
((MPT_RQSL(mpt) - sizeof (MSG_SCSI_IO_REQUEST) + sizeof (SGE_IO_UNION)) / \
sizeof (SGE_IO_UNION))
/***************************** IOC Initialization *****************************/
int mpt_reset(struct mpt_softc *, int /*reinit*/);
/****************************** Debugging ************************************/
void mpt_dump_data(struct mpt_softc *, const char *, void *, int);
void mpt_dump_request(struct mpt_softc *, request_t *);
enum {
MPT_PRT_ALWAYS,
MPT_PRT_FATAL,
MPT_PRT_ERROR,
MPT_PRT_WARN,
MPT_PRT_INFO,
MPT_PRT_NEGOTIATION,
MPT_PRT_DEBUG,
MPT_PRT_DEBUG1,
MPT_PRT_DEBUG2,
MPT_PRT_DEBUG3,
MPT_PRT_TRACE,
MPT_PRT_NONE=100
};
#define mpt_lprt(mpt, level, ...) \
do { \
if (level <= (mpt)->verbose) \
mpt_prt(mpt, __VA_ARGS__); \
} while (0)
#if 0
#define mpt_lprtc(mpt, level, ...) \
do { \
if (level <= (mpt)->verbose) \
mpt_prtc(mpt, __VA_ARGS__); \
} while (0)
#endif
void mpt_prt(struct mpt_softc *, const char *, ...)
__printflike(2, 3);
void mpt_prtc(struct mpt_softc *, const char *, ...)
__printflike(2, 3);
/**************************** Target Mode Related ***************************/
static __inline int mpt_cdblen(uint8_t, int);
static __inline int
mpt_cdblen(uint8_t cdb0, int maxlen)
{
int group = cdb0 >> 5;
switch (group) {
case 0:
return (6);
case 1:
return (10);
case 4:
case 5:
return (12);
default:
return (16);
}
}
#ifdef INVARIANTS
static __inline request_t * mpt_tag_2_req(struct mpt_softc *, uint32_t);
static __inline request_t *
mpt_tag_2_req(struct mpt_softc *mpt, uint32_t tag)
{
uint16_t rtg = (tag >> 18);
KASSERT(rtg < mpt->tgt_cmds_allocated, ("bad tag %d", tag));
KASSERT(mpt->tgt_cmd_ptrs, ("no cmd backpointer array"));
KASSERT(mpt->tgt_cmd_ptrs[rtg], ("no cmd backpointer"));
return (mpt->tgt_cmd_ptrs[rtg]);
}
#endif
static __inline int
mpt_req_on_free_list(struct mpt_softc *, request_t *);
static __inline int
mpt_req_on_pending_list(struct mpt_softc *, request_t *);
/*
* Is request on freelist?
*/
static __inline int
mpt_req_on_free_list(struct mpt_softc *mpt, request_t *req)
{
request_t *lrq;
TAILQ_FOREACH(lrq, &mpt->request_free_list, links) {
if (lrq == req) {
return (1);
}
}
return (0);
}
/*
* Is request on pending list?
*/
static __inline int
mpt_req_on_pending_list(struct mpt_softc *mpt, request_t *req)
{
request_t *lrq;
TAILQ_FOREACH(lrq, &mpt->request_pending_list, links) {
if (lrq == req) {
return (1);
}
}
return (0);
}
#ifdef INVARIANTS
static __inline void
mpt_req_spcl(struct mpt_softc *, request_t *, const char *, int);
static __inline void
mpt_req_not_spcl(struct mpt_softc *, request_t *, const char *, int);
/*
* Make sure that req *is* part of one of the special lists
*/
static __inline void
mpt_req_spcl(struct mpt_softc *mpt, request_t *req, const char *s, int line)
{
int i;
for (i = 0; i < mpt->els_cmds_allocated; i++) {
if (req == mpt->els_cmd_ptrs[i]) {
return;
}
}
for (i = 0; i < mpt->tgt_cmds_allocated; i++) {
if (req == mpt->tgt_cmd_ptrs[i]) {
return;
}
}
panic("%s(%d): req %p:%u function %x not in els or tgt ptrs",
s, line, req, req->serno,
((PTR_MSG_REQUEST_HEADER)req->req_vbuf)->Function);
}
/*
* Make sure that req is *not* part of one of the special lists.
*/
static __inline void
mpt_req_not_spcl(struct mpt_softc *mpt, request_t *req, const char *s, int line)
{
int i;
for (i = 0; i < mpt->els_cmds_allocated; i++) {
KASSERT(req != mpt->els_cmd_ptrs[i],
("%s(%d): req %p:%u func %x in els ptrs at ioindex %d",
s, line, req, req->serno,
((PTR_MSG_REQUEST_HEADER)req->req_vbuf)->Function, i));
}
for (i = 0; i < mpt->tgt_cmds_allocated; i++) {
KASSERT(req != mpt->tgt_cmd_ptrs[i],
("%s(%d): req %p:%u func %x in tgt ptrs at ioindex %d",
s, line, req, req->serno,
((PTR_MSG_REQUEST_HEADER)req->req_vbuf)->Function, i));
}
}
#endif
/*
* Task Management Types, purely for internal consumption
*/
typedef enum {
MPT_ABORT_TASK_SET=1234,
MPT_CLEAR_TASK_SET,
MPT_TARGET_RESET,
MPT_CLEAR_ACA,
MPT_TERMINATE_TASK,
MPT_NIL_TMT_VALUE=5678
} mpt_task_mgmt_t;
/**************************** Unclassified Routines ***************************/
void mpt_send_cmd(struct mpt_softc *mpt, request_t *req);
int mpt_recv_handshake_reply(struct mpt_softc *mpt,
size_t reply_len, void *reply);
int mpt_wait_req(struct mpt_softc *mpt, request_t *req,
mpt_req_state_t state, mpt_req_state_t mask,
int sleep_ok, int time_ms);
void mpt_enable_ints(struct mpt_softc *mpt);
void mpt_disable_ints(struct mpt_softc *mpt);
int mpt_attach(struct mpt_softc *mpt);
int mpt_shutdown(struct mpt_softc *mpt);
int mpt_detach(struct mpt_softc *mpt);
int mpt_send_handshake_cmd(struct mpt_softc *mpt,
size_t len, void *cmd);
request_t * mpt_get_request(struct mpt_softc *mpt, int sleep_ok);
void mpt_free_request(struct mpt_softc *mpt, request_t *req);
void mpt_intr(void *arg);
void mpt_check_doorbell(struct mpt_softc *mpt);
void mpt_dump_reply_frame(struct mpt_softc *mpt,
MSG_DEFAULT_REPLY *reply_frame);
int mpt_issue_cfg_req(struct mpt_softc */*mpt*/, request_t */*req*/,
cfgparms_t *params,
bus_addr_t /*addr*/, bus_size_t/*len*/,
int /*sleep_ok*/, int /*timeout_ms*/);
int mpt_read_extcfg_header(struct mpt_softc *mpt, int PageVersion,
int PageNumber, uint32_t PageAddress,
int ExtPageType,
CONFIG_EXTENDED_PAGE_HEADER *rslt,
int sleep_ok, int timeout_ms);
int mpt_read_extcfg_page(struct mpt_softc *mpt, int Action,
uint32_t PageAddress,
CONFIG_EXTENDED_PAGE_HEADER *hdr,
void *buf, size_t len, int sleep_ok,
int timeout_ms);
int mpt_read_cfg_header(struct mpt_softc *, int /*PageType*/,
int /*PageNumber*/,
uint32_t /*PageAddress*/,
CONFIG_PAGE_HEADER *,
int /*sleep_ok*/, int /*timeout_ms*/);
int mpt_read_cfg_page(struct mpt_softc *t, int /*Action*/,
uint32_t /*PageAddress*/,
CONFIG_PAGE_HEADER *, size_t /*len*/,
int /*sleep_ok*/, int /*timeout_ms*/);
int mpt_write_cfg_page(struct mpt_softc *, int /*Action*/,
uint32_t /*PageAddress*/,
CONFIG_PAGE_HEADER *, size_t /*len*/,
int /*sleep_ok*/, int /*timeout_ms*/);
static __inline int
mpt_read_cur_cfg_page(struct mpt_softc *mpt, uint32_t PageAddress,
CONFIG_PAGE_HEADER *hdr, size_t len,
int sleep_ok, int timeout_ms)
{
return (mpt_read_cfg_page(mpt, MPI_CONFIG_ACTION_PAGE_READ_CURRENT,
PageAddress, hdr, len, sleep_ok, timeout_ms));
}
static __inline int
mpt_write_cur_cfg_page(struct mpt_softc *mpt, uint32_t PageAddress,
CONFIG_PAGE_HEADER *hdr, size_t len, int sleep_ok,
int timeout_ms)
{
return (mpt_write_cfg_page(mpt, MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT,
PageAddress, hdr, len, sleep_ok,
timeout_ms));
}
/* mpt_debug.c functions */
void mpt_print_reply(void *vmsg);
void mpt_print_db(uint32_t mb);
void mpt_print_config_reply(void *vmsg);
char *mpt_ioc_diag(uint32_t diag);
void mpt_req_state(mpt_req_state_t state);
void mpt_print_config_request(void *vmsg);
void mpt_print_request(void *vmsg);
void mpt_dump_sgl(SGE_IO_UNION *se, int offset);
#endif /* _MPT_H_ */