d72a078647
- Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
362 lines
8.5 KiB
C
362 lines
8.5 KiB
C
/*-
|
|
* Copyright (c) 2006 IronPort Systems Inc. <ambrisko@ironport.com>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/condvar.h>
|
|
#include <sys/eventhandler.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/kthread.h>
|
|
#include <sys/module.h>
|
|
#include <sys/rman.h>
|
|
#include <sys/selinfo.h>
|
|
#include <machine/bus.h>
|
|
|
|
#ifdef LOCAL_MODULE
|
|
#include <ipmi.h>
|
|
#include <ipmivars.h>
|
|
#else
|
|
#include <sys/ipmi.h>
|
|
#include <dev/ipmi/ipmivars.h>
|
|
#endif
|
|
|
|
static void smic_wait_for_tx_okay(struct ipmi_softc *);
|
|
static void smic_wait_for_rx_okay(struct ipmi_softc *);
|
|
static void smic_wait_for_not_busy(struct ipmi_softc *);
|
|
static void smic_set_busy(struct ipmi_softc *);
|
|
|
|
static void
|
|
smic_wait_for_tx_okay(struct ipmi_softc *sc)
|
|
{
|
|
int flags;
|
|
|
|
do {
|
|
flags = INB(sc, SMIC_FLAGS);
|
|
} while (!(flags & SMIC_STATUS_TX_RDY));
|
|
}
|
|
|
|
static void
|
|
smic_wait_for_rx_okay(struct ipmi_softc *sc)
|
|
{
|
|
int flags;
|
|
|
|
do {
|
|
flags = INB(sc, SMIC_FLAGS);
|
|
} while (!(flags & SMIC_STATUS_RX_RDY));
|
|
}
|
|
|
|
static void
|
|
smic_wait_for_not_busy(struct ipmi_softc *sc)
|
|
{
|
|
int flags;
|
|
|
|
do {
|
|
flags = INB(sc, SMIC_FLAGS);
|
|
} while (flags & SMIC_STATUS_BUSY);
|
|
}
|
|
|
|
static void
|
|
smic_set_busy(struct ipmi_softc *sc)
|
|
{
|
|
int flags;
|
|
|
|
flags = INB(sc, SMIC_FLAGS);
|
|
flags |= SMIC_STATUS_BUSY;
|
|
flags &= ~SMIC_STATUS_RESERVED;
|
|
OUTB(sc, SMIC_FLAGS, flags);
|
|
}
|
|
|
|
/*
|
|
* Start a transfer with a WR_START transaction that sends the NetFn/LUN
|
|
* address.
|
|
*/
|
|
static int
|
|
smic_start_write(struct ipmi_softc *sc, u_char data)
|
|
{
|
|
u_char error, status;
|
|
|
|
smic_wait_for_not_busy(sc);
|
|
|
|
OUTB(sc, SMIC_CTL_STS, SMIC_CC_SMS_WR_START);
|
|
OUTB(sc, SMIC_DATA, data);
|
|
smic_set_busy(sc);
|
|
smic_wait_for_not_busy(sc);
|
|
status = INB(sc, SMIC_CTL_STS);
|
|
if (status != SMIC_SC_SMS_WR_START) {
|
|
error = INB(sc, SMIC_DATA);
|
|
device_printf(sc->ipmi_dev, "SMIC: Write did not start %02x\n",
|
|
error);
|
|
return (0);
|
|
}
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* Write a byte in the middle of the message (either the command or one of
|
|
* the data bytes) using a WR_NEXT transaction.
|
|
*/
|
|
static int
|
|
smic_write_next(struct ipmi_softc *sc, u_char data)
|
|
{
|
|
u_char error, status;
|
|
|
|
OUTB(sc, SMIC_CTL_STS, SMIC_CC_SMS_WR_NEXT);
|
|
smic_wait_for_tx_okay(sc);
|
|
OUTB(sc, SMIC_DATA, data);
|
|
smic_set_busy(sc);
|
|
smic_wait_for_not_busy(sc);
|
|
status = INB(sc, SMIC_CTL_STS);
|
|
if (status != SMIC_SC_SMS_WR_NEXT) {
|
|
error = INB(sc, SMIC_DATA);
|
|
device_printf(sc->ipmi_dev, "SMIC: Write did not next %02x\n",
|
|
error);
|
|
return (0);
|
|
}
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* Write the last byte of a transfer to end the write phase via a WR_END
|
|
* transaction.
|
|
*/
|
|
static int
|
|
smic_write_last(struct ipmi_softc *sc, u_char data)
|
|
{
|
|
u_char error, status;
|
|
|
|
OUTB(sc, SMIC_CTL_STS, SMIC_CC_SMS_WR_END);
|
|
smic_wait_for_tx_okay(sc);
|
|
OUTB(sc, SMIC_DATA, data);
|
|
smic_set_busy(sc);
|
|
smic_wait_for_not_busy(sc);
|
|
status = INB(sc, SMIC_CTL_STS);
|
|
if (status != SMIC_SC_SMS_WR_END) {
|
|
error = INB(sc, SMIC_DATA);
|
|
device_printf(sc->ipmi_dev, "SMIC: Write did not end %02x\n",
|
|
error);
|
|
return (0);
|
|
}
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* Start the read phase of a transfer with a RD_START transaction.
|
|
*/
|
|
static int
|
|
smic_start_read(struct ipmi_softc *sc, u_char *data)
|
|
{
|
|
u_char error, status;
|
|
|
|
smic_wait_for_not_busy(sc);
|
|
|
|
OUTB(sc, SMIC_CTL_STS, SMIC_CC_SMS_RD_START);
|
|
smic_wait_for_rx_okay(sc);
|
|
smic_set_busy(sc);
|
|
smic_wait_for_not_busy(sc);
|
|
status = INB(sc, SMIC_CTL_STS);
|
|
if (status != SMIC_SC_SMS_RD_START) {
|
|
error = INB(sc, SMIC_DATA);
|
|
device_printf(sc->ipmi_dev, "SMIC: Read did not start %02x\n",
|
|
error);
|
|
return (0);
|
|
}
|
|
*data = INB(sc, SMIC_DATA);
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* Read a byte via a RD_NEXT transaction. If this was the last byte, return
|
|
* 2 rather than 1.
|
|
*/
|
|
static int
|
|
smic_read_byte(struct ipmi_softc *sc, u_char *data)
|
|
{
|
|
u_char error, status;
|
|
|
|
OUTB(sc, SMIC_CTL_STS, SMIC_SC_SMS_RD_NEXT);
|
|
smic_wait_for_rx_okay(sc);
|
|
smic_set_busy(sc);
|
|
smic_wait_for_not_busy(sc);
|
|
status = INB(sc, SMIC_CTL_STS);
|
|
if (status != SMIC_SC_SMS_RD_NEXT &&
|
|
status != SMIC_SC_SMS_RD_END) {
|
|
error = INB(sc, SMIC_DATA);
|
|
device_printf(sc->ipmi_dev, "SMIC: Read did not next %02x\n",
|
|
error);
|
|
return (0);
|
|
}
|
|
*data = INB(sc, SMIC_DATA);
|
|
if (status == SMIC_SC_SMS_RD_NEXT)
|
|
return (1);
|
|
else
|
|
return (2);
|
|
}
|
|
|
|
/* Complete a transfer via a RD_END transaction after reading the last byte. */
|
|
static int
|
|
smic_read_end(struct ipmi_softc *sc)
|
|
{
|
|
u_char error, status;
|
|
|
|
OUTB(sc, SMIC_CTL_STS, SMIC_CC_SMS_RD_END);
|
|
smic_set_busy(sc);
|
|
smic_wait_for_not_busy(sc);
|
|
status = INB(sc, SMIC_CTL_STS);
|
|
if (status != SMIC_SC_SMS_RDY) {
|
|
error = INB(sc, SMIC_DATA);
|
|
device_printf(sc->ipmi_dev, "SMIC: Read did not end %02x\n",
|
|
error);
|
|
return (0);
|
|
}
|
|
return (1);
|
|
}
|
|
|
|
static int
|
|
smic_polled_request(struct ipmi_softc *sc, struct ipmi_request *req)
|
|
{
|
|
u_char *cp, data;
|
|
int i, state;
|
|
|
|
/* First, start the message with the address. */
|
|
if (!smic_start_write(sc, req->ir_addr))
|
|
return (0);
|
|
|
|
if (req->ir_requestlen == 0) {
|
|
/* Send the command as the last byte. */
|
|
if (!smic_write_last(sc, req->ir_command))
|
|
return (0);
|
|
} else {
|
|
/* Send the command. */
|
|
if (!smic_write_next(sc, req->ir_command))
|
|
return (0);
|
|
|
|
/* Send the payload. */
|
|
cp = req->ir_request;
|
|
for (i = 0; i < req->ir_requestlen - 1; i++)
|
|
if (!smic_write_next(sc, *cp++))
|
|
return (0);
|
|
if (!smic_write_last(sc, *cp))
|
|
return (0);
|
|
}
|
|
|
|
/* Start the read phase by reading the NetFn/LUN. */
|
|
if (smic_start_read(sc, &data) != 1)
|
|
return (0);
|
|
if (data != IPMI_REPLY_ADDR(req->ir_addr)) {
|
|
device_printf(sc->ipmi_dev, "SMIC: Reply address mismatch\n");
|
|
return (0);
|
|
}
|
|
|
|
/* Read the command. */
|
|
if (smic_read_byte(sc, &data) != 1)
|
|
return (0);
|
|
if (data != req->ir_command) {
|
|
device_printf(sc->ipmi_dev, "SMIC: Command mismatch\n");
|
|
return (0);
|
|
}
|
|
|
|
/* Read the completion code. */
|
|
state = smic_read_byte(sc, &req->ir_compcode);
|
|
if (state == 0)
|
|
return (0);
|
|
|
|
/* Finally, read the reply from the BMC. */
|
|
i = 0;
|
|
while (state == 1) {
|
|
state = smic_read_byte(sc, &data);
|
|
if (state == 0)
|
|
return (0);
|
|
if (state == 2)
|
|
break;
|
|
if (i < req->ir_replybuflen)
|
|
req->ir_reply[i] = data;
|
|
i++;
|
|
}
|
|
|
|
/* Terminate the transfer. */
|
|
if (!smic_read_end(sc))
|
|
return (0);
|
|
req->ir_replylen = i;
|
|
if (req->ir_replybuflen < i && req->ir_replybuflen != 0)
|
|
device_printf(sc->ipmi_dev,
|
|
"SMIC: Read short: %zd buffer, %d actual\n",
|
|
req->ir_replybuflen, i);
|
|
return (1);
|
|
}
|
|
|
|
static void
|
|
smic_loop(void *arg)
|
|
{
|
|
struct ipmi_softc *sc = arg;
|
|
struct ipmi_request *req;
|
|
int i, ok;
|
|
|
|
IPMI_LOCK(sc);
|
|
while ((req = ipmi_dequeue_request(sc)) != NULL) {
|
|
ok = 0;
|
|
for (i = 0; i < 3 && !ok; i++)
|
|
ok = smic_polled_request(sc, req);
|
|
if (ok)
|
|
req->ir_error = 0;
|
|
else
|
|
req->ir_error = EIO;
|
|
ipmi_complete_request(sc, req);
|
|
}
|
|
IPMI_UNLOCK(sc);
|
|
kthread_exit(0);
|
|
}
|
|
|
|
static int
|
|
smic_startup(struct ipmi_softc *sc)
|
|
{
|
|
|
|
return (kthread_create(smic_loop, sc, &sc->ipmi_kthread, 0, 0,
|
|
"%s: smic", device_get_nameunit(sc->ipmi_dev)));
|
|
}
|
|
|
|
int
|
|
ipmi_smic_attach(struct ipmi_softc *sc)
|
|
{
|
|
int flags;
|
|
|
|
/* Setup function pointers. */
|
|
sc->ipmi_startup = smic_startup;
|
|
sc->ipmi_enqueue_request = ipmi_polled_enqueue_request;
|
|
|
|
/* See if we can talk to the controller. */
|
|
flags = INB(sc, SMIC_FLAGS);
|
|
if (flags == 0xff) {
|
|
device_printf(sc->ipmi_dev, "couldn't find it\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
return (0);
|
|
}
|