Adrian Chadd e1252ce1d2 Extend the beacon code slightly to support AP mode beaconing for the ... EDMA HAL hardware. * The EDMA HAL code assumes the nexttbtt and intval values are in TU/8 units, rather than TU. For now, just "hack" around that here, at least until I code up something to translate it in the HAL. * Setup some different TXQ flags for EDMA hardware. * The EDMA HAL doesn't support setting the first rate series via ath_hal_setuptxdesc() - instead, a call to ath_hal_set11nratescenario() is always required. So for now, just do an 11n rate series setup for EDMA beacon frames. This allows my AR9380 to successfully transmit beacon frames. However, CABQ TX and all normal data frame TX and TX completion is still not functional and will require some more significant code churn to make work.		2012-08-11 23:26:19 +00:00
..
ath_dfs/null	In a complete lack of foresight on my part, my previous commit broke	2012-06-24 08:47:19 +00:00
ath_hal	Commit device IDs for the (eventually upcoming) AR9380 HAL.	2012-08-07 23:45:43 +00:00
ath_rate	Fix a case of "mis-located braces".	2012-08-01 00:18:02 +00:00
ah_osdep.c	Fix the HAL debugging to only use one bit to mark a message as unmaskable.	2012-07-01 02:34:32 +00:00
ah_osdep.h	Migrate the ath_hal_filltxdesc() API to take a list of buffer/seglen values.	2012-08-05 10:12:27 +00:00
if_ath_ahb.c	Flesh out a new DMA map for the EDMA TX completion status, as well	2012-07-23 02:49:25 +00:00
if_ath_beacon.c	Extend the beacon code slightly to support AP mode beaconing for the	2012-08-11 23:26:19 +00:00
if_ath_beacon.h	Extend the beacon code slightly to support AP mode beaconing for the	2012-08-11 23:26:19 +00:00
if_ath_debug.c	Add the AR9380 HAL to the TX descriptor debugging, in order to dump all	2012-08-11 22:39:27 +00:00
if_ath_debug.h	Map ATH_KTR_* to 0 when ATH_DEBUG is not defined. This effectively NOPs	2012-07-11 12:10:13 +00:00
if_ath_keycache.c	Add a 'vap' to ath_keyset().	2011-11-08 19:25:52 +00:00
if_ath_keycache.h	Add a 'vap' to ath_keyset().	2011-11-08 19:25:52 +00:00
if_ath_led.c	Bring over the initial 802.11n bluetooth coexistence support code.	2012-06-26 22:16:53 +00:00
if_ath_led.h	Refactor out the software LED config code into a common function, called	2011-12-26 05:46:22 +00:00
if_ath_misc.h	Migrate some more TX side setup routines to be methods.	2012-07-31 03:09:48 +00:00
if_ath_pci.c	Flesh out a new DMA map for the EDMA TX completion status, as well	2012-07-23 02:49:25 +00:00
if_ath_rx_edma.c	Remove unnecessary debugging printf()s.	2012-08-06 22:54:10 +00:00
if_ath_rx_edma.h	Begin abstracting out the RX path in preparation for RX EDMA support.	2012-07-03 06:59:12 +00:00
if_ath_rx.c	Remove unnecessary debugging printf()s.	2012-08-06 22:54:10 +00:00
if_ath_rx.h	Convert sc_rxpending to a per-EDMA queue, and use that for the legacy code.	2012-07-10 00:02:19 +00:00
if_ath_sysctl.c	Handle RX Keymiss events.	2012-07-15 20:51:41 +00:00
if_ath_sysctl.h	Break out most of the HAL related tweaks into a per-HAL instance,	2011-06-23 02:38:36 +00:00
if_ath_tdma.c	Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c.	2012-05-20 02:49:42 +00:00
if_ath_tdma.h	Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c.	2012-05-20 02:49:42 +00:00
if_ath_tsf.h	Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch].	2012-05-20 02:05:10 +00:00
if_ath_tx_edma.c	Begin fleshing out the TX FIFO support.	2012-08-11 22:20:28 +00:00
if_ath_tx_edma.h	Begin separating out the TX DMA setup in preparation for TX EDMA support.	2012-07-23 03:52:18 +00:00
if_ath_tx_ht.c	Shuffle the call to ath_hal_setuplasttxdesc() to _after_ the rate control	2012-07-31 17:08:29 +00:00
if_ath_tx_ht.h	Introduce TX aggregation and software TX queue management	2011-11-08 22:43:13 +00:00
if_ath_tx.c	Add the AR9300 HAL ID in to the 11n check routine.	2012-08-11 22:25:28 +00:00
if_ath_tx.h	Migrate some more TX side setup routines to be methods.	2012-07-31 03:09:48 +00:00
if_ath.c	Extend the beacon code slightly to support AP mode beaconing for the	2012-08-11 23:26:19 +00:00
if_athdfs.h	Change the ath_dfs_process_phy_err() method to take an mbuf rather than	2012-06-24 08:09:06 +00:00
if_athioctl.h	Placeholder ioctl for an upcoming rate control statistics API change.	2012-07-31 02:18:10 +00:00
if_athrate.h	Create an ioctl API for fetching the current rate control information.	2012-07-20 01:27:20 +00:00
if_athvar.h	Begin fleshing out the TX FIFO support.	2012-08-11 22:20:28 +00:00