712 lines
17 KiB
C
712 lines
17 KiB
C
/*-
|
|
* Copyright (c) 2013 Thomas Skibo
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* Zynq-700 SLCR driver. Provides hooks for cpu_reset and PL control stuff.
|
|
* In the future, maybe MIO control, clock control, etc. could go here.
|
|
*
|
|
* Reference: Zynq-7000 All Programmable SoC Technical Reference Manual.
|
|
* (v1.4) November 16, 2012. Xilinx doc UG585.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/resource.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <machine/stdarg.h>
|
|
|
|
#include <dev/ofw/ofw_bus.h>
|
|
#include <dev/ofw/ofw_bus_subr.h>
|
|
|
|
#include <arm/xilinx/zy7_slcr.h>
|
|
|
|
struct zy7_slcr_softc {
|
|
device_t dev;
|
|
struct mtx sc_mtx;
|
|
struct resource *mem_res;
|
|
};
|
|
|
|
static struct zy7_slcr_softc *zy7_slcr_softc_p;
|
|
extern void (*zynq7_cpu_reset);
|
|
|
|
#define ZSLCR_LOCK(sc) mtx_lock(&(sc)->sc_mtx)
|
|
#define ZSLCR_UNLOCK(sc) mtx_unlock(&(sc)->sc_mtx)
|
|
#define ZSLCR_LOCK_INIT(sc) \
|
|
mtx_init(&(sc)->sc_mtx, device_get_nameunit((sc)->dev), \
|
|
"zy7_slcr", MTX_DEF)
|
|
#define ZSLCR_LOCK_DESTROY(_sc) mtx_destroy(&_sc->sc_mtx);
|
|
|
|
#define RD4(sc, off) (bus_read_4((sc)->mem_res, (off)))
|
|
#define WR4(sc, off, val) (bus_write_4((sc)->mem_res, (off), (val)))
|
|
|
|
#define ZYNQ_DEFAULT_PS_CLK_FREQUENCY 33333333 /* 33.3 Mhz */
|
|
|
|
SYSCTL_NODE(_hw, OID_AUTO, zynq, CTLFLAG_RD, 0, "Xilinx Zynq-7000");
|
|
|
|
static char zynq_bootmode[64];
|
|
SYSCTL_STRING(_hw_zynq, OID_AUTO, bootmode, CTLFLAG_RD, zynq_bootmode, 0,
|
|
"Zynq boot mode");
|
|
|
|
static char zynq_pssid[100];
|
|
SYSCTL_STRING(_hw_zynq, OID_AUTO, pssid, CTLFLAG_RD, zynq_pssid, 0,
|
|
"Zynq PSS IDCODE");
|
|
|
|
static uint32_t zynq_reboot_status;
|
|
SYSCTL_INT(_hw_zynq, OID_AUTO, reboot_status, CTLFLAG_RD, &zynq_reboot_status,
|
|
0, "Zynq REBOOT_STATUS register");
|
|
|
|
static int ps_clk_frequency;
|
|
SYSCTL_INT(_hw_zynq, OID_AUTO, ps_clk_frequency, CTLFLAG_RD, &ps_clk_frequency,
|
|
0, "Zynq PS_CLK Frequency");
|
|
|
|
static int io_pll_frequency;
|
|
SYSCTL_INT(_hw_zynq, OID_AUTO, io_pll_frequency, CTLFLAG_RD, &io_pll_frequency,
|
|
0, "Zynq IO PLL Frequency");
|
|
|
|
static int arm_pll_frequency;
|
|
SYSCTL_INT(_hw_zynq, OID_AUTO, arm_pll_frequency, CTLFLAG_RD,
|
|
&arm_pll_frequency, 0, "Zynq ARM PLL Frequency");
|
|
|
|
static int ddr_pll_frequency;
|
|
SYSCTL_INT(_hw_zynq, OID_AUTO, ddr_pll_frequency, CTLFLAG_RD,
|
|
&ddr_pll_frequency, 0, "Zynq DDR PLL Frequency");
|
|
|
|
static void
|
|
zy7_slcr_unlock(struct zy7_slcr_softc *sc)
|
|
{
|
|
|
|
/* Unlock SLCR with magic number. */
|
|
WR4(sc, ZY7_SLCR_UNLOCK, ZY7_SLCR_UNLOCK_MAGIC);
|
|
}
|
|
|
|
static void
|
|
zy7_slcr_lock(struct zy7_slcr_softc *sc)
|
|
{
|
|
|
|
/* Lock SLCR with magic number. */
|
|
WR4(sc, ZY7_SLCR_LOCK, ZY7_SLCR_LOCK_MAGIC);
|
|
}
|
|
|
|
static void
|
|
zy7_slcr_cpu_reset(void)
|
|
{
|
|
struct zy7_slcr_softc *sc = zy7_slcr_softc_p;
|
|
|
|
/* Unlock SLCR registers. */
|
|
zy7_slcr_unlock(sc);
|
|
|
|
/* This has something to do with a work-around so the fsbl will load
|
|
* the bitstream after soft-reboot. It's very important.
|
|
*/
|
|
WR4(sc, ZY7_SLCR_REBOOT_STAT,
|
|
RD4(sc, ZY7_SLCR_REBOOT_STAT) & 0xf0ffffff);
|
|
|
|
/* Soft reset */
|
|
WR4(sc, ZY7_SLCR_PSS_RST_CTRL, ZY7_SLCR_PSS_RST_CTRL_SOFT_RESET);
|
|
|
|
for (;;)
|
|
;
|
|
}
|
|
|
|
/* Assert PL resets and disable level shifters in preparation of programming
|
|
* the PL (FPGA) section. Called from zy7_devcfg.c.
|
|
*/
|
|
void
|
|
zy7_slcr_preload_pl(void)
|
|
{
|
|
struct zy7_slcr_softc *sc = zy7_slcr_softc_p;
|
|
|
|
if (!sc)
|
|
return;
|
|
|
|
ZSLCR_LOCK(sc);
|
|
|
|
/* Unlock SLCR registers. */
|
|
zy7_slcr_unlock(sc);
|
|
|
|
/* Assert top level output resets. */
|
|
WR4(sc, ZY7_SLCR_FPGA_RST_CTRL, ZY7_SLCR_FPGA_RST_CTRL_RST_ALL);
|
|
|
|
/* Disable all level shifters. */
|
|
WR4(sc, ZY7_SLCR_LVL_SHFTR_EN, 0);
|
|
|
|
/* Lock SLCR registers. */
|
|
zy7_slcr_lock(sc);
|
|
|
|
ZSLCR_UNLOCK(sc);
|
|
}
|
|
|
|
/* After PL configuration, enable level shifters and deassert top-level
|
|
* PL resets. Called from zy7_devcfg.c. Optionally, the level shifters
|
|
* can be left disabled but that's rare of an FPGA application. That option
|
|
* is controlled by a sysctl in the devcfg driver.
|
|
*/
|
|
void
|
|
zy7_slcr_postload_pl(int en_level_shifters)
|
|
{
|
|
struct zy7_slcr_softc *sc = zy7_slcr_softc_p;
|
|
|
|
if (!sc)
|
|
return;
|
|
|
|
ZSLCR_LOCK(sc);
|
|
|
|
/* Unlock SLCR registers. */
|
|
zy7_slcr_unlock(sc);
|
|
|
|
if (en_level_shifters)
|
|
/* Enable level shifters. */
|
|
WR4(sc, ZY7_SLCR_LVL_SHFTR_EN, ZY7_SLCR_LVL_SHFTR_EN_ALL);
|
|
|
|
/* Deassert top level output resets. */
|
|
WR4(sc, ZY7_SLCR_FPGA_RST_CTRL, 0);
|
|
|
|
/* Lock SLCR registers. */
|
|
zy7_slcr_lock(sc);
|
|
|
|
ZSLCR_UNLOCK(sc);
|
|
}
|
|
|
|
/* Override cgem_set_refclk() in gigabit ethernet driver
|
|
* (sys/dev/cadence/if_cgem.c). This function is called to
|
|
* request a change in the gem's reference clock speed.
|
|
*/
|
|
int
|
|
cgem_set_ref_clk(int unit, int frequency)
|
|
{
|
|
struct zy7_slcr_softc *sc = zy7_slcr_softc_p;
|
|
int div0, div1;
|
|
|
|
if (!sc)
|
|
return (-1);
|
|
|
|
/* Find suitable divisor pairs. Round result to nearest khz
|
|
* to test for match.
|
|
*/
|
|
for (div1 = 1; div1 <= ZY7_SLCR_GEM_CLK_CTRL_DIVISOR1_MAX; div1++) {
|
|
div0 = (io_pll_frequency + div1 * frequency / 2) /
|
|
div1 / frequency;
|
|
if (div0 > 0 && div0 <= ZY7_SLCR_GEM_CLK_CTRL_DIVISOR_MAX &&
|
|
((io_pll_frequency / div0 / div1) + 500) / 1000 ==
|
|
(frequency + 500) / 1000)
|
|
break;
|
|
}
|
|
|
|
if (div1 > ZY7_SLCR_GEM_CLK_CTRL_DIVISOR1_MAX)
|
|
return (-1);
|
|
|
|
ZSLCR_LOCK(sc);
|
|
|
|
/* Unlock SLCR registers. */
|
|
zy7_slcr_unlock(sc);
|
|
|
|
/* Modify GEM reference clock. */
|
|
WR4(sc, unit ? ZY7_SLCR_GEM1_CLK_CTRL : ZY7_SLCR_GEM0_CLK_CTRL,
|
|
(div1 << ZY7_SLCR_GEM_CLK_CTRL_DIVISOR1_SHIFT) |
|
|
(div0 << ZY7_SLCR_GEM_CLK_CTRL_DIVISOR_SHIFT) |
|
|
ZY7_SLCR_GEM_CLK_CTRL_SRCSEL_IO_PLL |
|
|
ZY7_SLCR_GEM_CLK_CTRL_CLKACT);
|
|
|
|
/* Lock SLCR registers. */
|
|
zy7_slcr_lock(sc);
|
|
|
|
ZSLCR_UNLOCK(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* PL clocks management function
|
|
*/
|
|
int
|
|
zy7_pl_fclk_set_source(int unit, int source)
|
|
{
|
|
struct zy7_slcr_softc *sc = zy7_slcr_softc_p;
|
|
uint32_t reg;
|
|
|
|
if (!sc)
|
|
return (-1);
|
|
|
|
ZSLCR_LOCK(sc);
|
|
|
|
/* Unlock SLCR registers. */
|
|
zy7_slcr_unlock(sc);
|
|
|
|
/* Modify FPGAx source. */
|
|
reg = RD4(sc, ZY7_SLCR_FPGA_CLK_CTRL(unit));
|
|
reg &= ~(ZY7_SLCR_FPGA_CLK_CTRL_SRCSEL_MASK);
|
|
reg |= (source << ZY7_SLCR_FPGA_CLK_CTRL_SRCSEL_SHIFT);
|
|
WR4(sc, ZY7_SLCR_FPGA_CLK_CTRL(unit), reg);
|
|
|
|
/* Lock SLCR registers. */
|
|
zy7_slcr_lock(sc);
|
|
|
|
ZSLCR_UNLOCK(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
zy7_pl_fclk_get_source(int unit)
|
|
{
|
|
struct zy7_slcr_softc *sc = zy7_slcr_softc_p;
|
|
uint32_t reg;
|
|
int source;
|
|
|
|
if (!sc)
|
|
return (-1);
|
|
|
|
ZSLCR_LOCK(sc);
|
|
|
|
/* Modify GEM reference clock. */
|
|
reg = RD4(sc, ZY7_SLCR_FPGA_CLK_CTRL(unit));
|
|
source = (reg & ZY7_SLCR_FPGA_CLK_CTRL_SRCSEL_MASK) >>
|
|
ZY7_SLCR_FPGA_CLK_CTRL_SRCSEL_SHIFT;
|
|
|
|
/* ZY7_PL_FCLK_SRC_IO is actually b0x */
|
|
if ((source & 2) == 0)
|
|
source = ZY7_PL_FCLK_SRC_IO;
|
|
|
|
ZSLCR_UNLOCK(sc);
|
|
|
|
return (source);
|
|
}
|
|
|
|
int
|
|
zy7_pl_fclk_set_freq(int unit, int frequency)
|
|
{
|
|
struct zy7_slcr_softc *sc = zy7_slcr_softc_p;
|
|
int div0, div1;
|
|
int base_frequency;
|
|
uint32_t reg;
|
|
int source;
|
|
|
|
if (!sc)
|
|
return (-1);
|
|
|
|
source = zy7_pl_fclk_get_source(unit);
|
|
switch (source) {
|
|
case ZY7_PL_FCLK_SRC_IO:
|
|
base_frequency = io_pll_frequency;
|
|
break;
|
|
|
|
case ZY7_PL_FCLK_SRC_ARM:
|
|
base_frequency = arm_pll_frequency;
|
|
break;
|
|
|
|
case ZY7_PL_FCLK_SRC_DDR:
|
|
base_frequency = ddr_pll_frequency;
|
|
break;
|
|
|
|
default:
|
|
return (-1);
|
|
}
|
|
|
|
/* Find suitable divisor pairs. Round result to nearest khz
|
|
* to test for match.
|
|
*/
|
|
for (div1 = 1; div1 <= ZY7_SLCR_FPGA_CLK_CTRL_DIVISOR_MAX; div1++) {
|
|
div0 = (base_frequency + div1 * frequency / 2) /
|
|
div1 / frequency;
|
|
if (div0 > 0 && div0 <= ZY7_SLCR_FPGA_CLK_CTRL_DIVISOR_MAX &&
|
|
((base_frequency / div0 / div1) + 500) / 1000 ==
|
|
(frequency + 500) / 1000)
|
|
break;
|
|
}
|
|
|
|
if (div1 > ZY7_SLCR_FPGA_CLK_CTRL_DIVISOR_MAX)
|
|
return (-1);
|
|
|
|
ZSLCR_LOCK(sc);
|
|
|
|
/* Unlock SLCR registers. */
|
|
zy7_slcr_unlock(sc);
|
|
|
|
/* Modify FPGAx reference clock. */
|
|
reg = RD4(sc, ZY7_SLCR_FPGA_CLK_CTRL(unit));
|
|
reg &= ~(ZY7_SLCR_FPGA_CLK_CTRL_DIVISOR1_MASK |
|
|
ZY7_SLCR_FPGA_CLK_CTRL_DIVISOR0_MASK);
|
|
reg |= (div1 << ZY7_SLCR_FPGA_CLK_CTRL_DIVISOR1_SHIFT) |
|
|
(div0 << ZY7_SLCR_FPGA_CLK_CTRL_DIVISOR0_SHIFT);
|
|
WR4(sc, ZY7_SLCR_FPGA_CLK_CTRL(unit), reg);
|
|
|
|
/* Lock SLCR registers. */
|
|
zy7_slcr_lock(sc);
|
|
|
|
ZSLCR_UNLOCK(sc);
|
|
|
|
return (base_frequency / div0 / div1);
|
|
}
|
|
|
|
int
|
|
zy7_pl_fclk_get_freq(int unit)
|
|
{
|
|
struct zy7_slcr_softc *sc = zy7_slcr_softc_p;
|
|
int div0, div1;
|
|
int base_frequency;
|
|
int frequency;
|
|
uint32_t reg;
|
|
int source;
|
|
|
|
if (!sc)
|
|
return (-1);
|
|
|
|
source = zy7_pl_fclk_get_source(unit);
|
|
switch (source) {
|
|
case ZY7_PL_FCLK_SRC_IO:
|
|
base_frequency = io_pll_frequency;
|
|
break;
|
|
|
|
case ZY7_PL_FCLK_SRC_ARM:
|
|
base_frequency = arm_pll_frequency;
|
|
break;
|
|
|
|
case ZY7_PL_FCLK_SRC_DDR:
|
|
base_frequency = ddr_pll_frequency;
|
|
break;
|
|
|
|
default:
|
|
return (-1);
|
|
}
|
|
|
|
ZSLCR_LOCK(sc);
|
|
|
|
/* Modify FPGAx reference clock. */
|
|
reg = RD4(sc, ZY7_SLCR_FPGA_CLK_CTRL(unit));
|
|
div1 = (reg & ZY7_SLCR_FPGA_CLK_CTRL_DIVISOR1_MASK) >>
|
|
ZY7_SLCR_FPGA_CLK_CTRL_DIVISOR1_SHIFT;
|
|
div0 = (reg & ZY7_SLCR_FPGA_CLK_CTRL_DIVISOR0_MASK) >>
|
|
ZY7_SLCR_FPGA_CLK_CTRL_DIVISOR0_SHIFT;
|
|
|
|
ZSLCR_UNLOCK(sc);
|
|
|
|
if (div0 == 0)
|
|
div0 = 1;
|
|
|
|
if (div1 == 0)
|
|
div1 = 1;
|
|
|
|
frequency = (base_frequency / div0 / div1);
|
|
/* Round to KHz */
|
|
frequency = (frequency + 500) / 1000;
|
|
frequency = frequency * 1000;
|
|
|
|
return (frequency);
|
|
}
|
|
|
|
int
|
|
zy7_pl_fclk_enable(int unit)
|
|
{
|
|
struct zy7_slcr_softc *sc = zy7_slcr_softc_p;
|
|
|
|
if (!sc)
|
|
return (-1);
|
|
|
|
ZSLCR_LOCK(sc);
|
|
|
|
/* Unlock SLCR registers. */
|
|
zy7_slcr_unlock(sc);
|
|
|
|
WR4(sc, ZY7_SLCR_FPGA_THR_CTRL(unit), 0);
|
|
WR4(sc, ZY7_SLCR_FPGA_THR_CNT(unit), 0);
|
|
|
|
/* Lock SLCR registers. */
|
|
zy7_slcr_lock(sc);
|
|
|
|
ZSLCR_UNLOCK(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
zy7_pl_fclk_disable(int unit)
|
|
{
|
|
struct zy7_slcr_softc *sc = zy7_slcr_softc_p;
|
|
|
|
if (!sc)
|
|
return (-1);
|
|
|
|
ZSLCR_LOCK(sc);
|
|
|
|
/* Unlock SLCR registers. */
|
|
zy7_slcr_unlock(sc);
|
|
|
|
WR4(sc, ZY7_SLCR_FPGA_THR_CTRL(unit), 0);
|
|
WR4(sc, ZY7_SLCR_FPGA_THR_CNT(unit), 1);
|
|
|
|
/* Lock SLCR registers. */
|
|
zy7_slcr_lock(sc);
|
|
|
|
ZSLCR_UNLOCK(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
zy7_pl_fclk_enabled(int unit)
|
|
{
|
|
struct zy7_slcr_softc *sc = zy7_slcr_softc_p;
|
|
uint32_t reg;
|
|
|
|
if (!sc)
|
|
return (-1);
|
|
|
|
ZSLCR_LOCK(sc);
|
|
reg = RD4(sc, ZY7_SLCR_FPGA_THR_CNT(unit));
|
|
ZSLCR_UNLOCK(sc);
|
|
|
|
return !(reg & 1);
|
|
}
|
|
|
|
int
|
|
zy7_pl_level_shifters_enabled(void)
|
|
{
|
|
struct zy7_slcr_softc *sc = zy7_slcr_softc_p;
|
|
|
|
uint32_t reg;
|
|
|
|
if (!sc)
|
|
return (-1);
|
|
|
|
ZSLCR_LOCK(sc);
|
|
reg = RD4(sc, ZY7_SLCR_LVL_SHFTR_EN);
|
|
ZSLCR_UNLOCK(sc);
|
|
|
|
return (reg == ZY7_SLCR_LVL_SHFTR_EN_ALL);
|
|
}
|
|
|
|
void
|
|
zy7_pl_level_shifters_enable(void)
|
|
{
|
|
struct zy7_slcr_softc *sc = zy7_slcr_softc_p;
|
|
|
|
if (!sc)
|
|
return;
|
|
|
|
ZSLCR_LOCK(sc);
|
|
zy7_slcr_unlock(sc);
|
|
WR4(sc, ZY7_SLCR_LVL_SHFTR_EN, ZY7_SLCR_LVL_SHFTR_EN_ALL);
|
|
zy7_slcr_lock(sc);
|
|
ZSLCR_UNLOCK(sc);
|
|
}
|
|
|
|
void
|
|
zy7_pl_level_shifters_disable(void)
|
|
{
|
|
struct zy7_slcr_softc *sc = zy7_slcr_softc_p;
|
|
|
|
if (!sc)
|
|
return;
|
|
|
|
ZSLCR_LOCK(sc);
|
|
zy7_slcr_unlock(sc);
|
|
WR4(sc, ZY7_SLCR_LVL_SHFTR_EN, 0);
|
|
zy7_slcr_lock(sc);
|
|
ZSLCR_UNLOCK(sc);
|
|
}
|
|
|
|
static int
|
|
zy7_slcr_probe(device_t dev)
|
|
{
|
|
|
|
if (!ofw_bus_status_okay(dev))
|
|
return (ENXIO);
|
|
|
|
if (!ofw_bus_is_compatible(dev, "xlnx,zy7_slcr"))
|
|
return (ENXIO);
|
|
|
|
device_set_desc(dev, "Zynq-7000 slcr block");
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
zy7_slcr_attach(device_t dev)
|
|
{
|
|
struct zy7_slcr_softc *sc = device_get_softc(dev);
|
|
int rid;
|
|
phandle_t node;
|
|
pcell_t cell;
|
|
uint32_t bootmode;
|
|
uint32_t pss_idcode;
|
|
uint32_t arm_pll_ctrl;
|
|
uint32_t ddr_pll_ctrl;
|
|
uint32_t io_pll_ctrl;
|
|
static char *bootdev_names[] = {
|
|
"JTAG", "Quad-SPI", "NOR", "(3?)",
|
|
"NAND", "SD Card", "(6?)", "(7?)"
|
|
};
|
|
|
|
/* Allow only one attach. */
|
|
if (zy7_slcr_softc_p != NULL)
|
|
return (ENXIO);
|
|
|
|
sc->dev = dev;
|
|
|
|
ZSLCR_LOCK_INIT(sc);
|
|
|
|
/* Get memory resource. */
|
|
rid = 0;
|
|
sc->mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
|
|
RF_ACTIVE);
|
|
if (sc->mem_res == NULL) {
|
|
device_printf(dev, "could not allocate memory resources.\n");
|
|
return (ENOMEM);
|
|
}
|
|
|
|
/* Hook up cpu_reset. */
|
|
zy7_slcr_softc_p = sc;
|
|
zynq7_cpu_reset = zy7_slcr_cpu_reset;
|
|
|
|
/* Read info and set sysctls. */
|
|
bootmode = RD4(sc, ZY7_SLCR_BOOT_MODE);
|
|
snprintf(zynq_bootmode, sizeof(zynq_bootmode),
|
|
"0x%x: boot device: %s", bootmode,
|
|
bootdev_names[bootmode & ZY7_SLCR_BOOT_MODE_BOOTDEV_MASK]);
|
|
|
|
pss_idcode = RD4(sc, ZY7_SLCR_PSS_IDCODE);
|
|
snprintf(zynq_pssid, sizeof(zynq_pssid),
|
|
"0x%x: manufacturer: 0x%x device: 0x%x "
|
|
"family: 0x%x sub-family: 0x%x rev: 0x%x",
|
|
pss_idcode,
|
|
(pss_idcode & ZY7_SLCR_PSS_IDCODE_MNFR_ID_MASK) >>
|
|
ZY7_SLCR_PSS_IDCODE_MNFR_ID_SHIFT,
|
|
(pss_idcode & ZY7_SLCR_PSS_IDCODE_DEVICE_MASK) >>
|
|
ZY7_SLCR_PSS_IDCODE_DEVICE_SHIFT,
|
|
(pss_idcode & ZY7_SLCR_PSS_IDCODE_FAMILY_MASK) >>
|
|
ZY7_SLCR_PSS_IDCODE_FAMILY_SHIFT,
|
|
(pss_idcode & ZY7_SLCR_PSS_IDCODE_SUB_FAMILY_MASK) >>
|
|
ZY7_SLCR_PSS_IDCODE_SUB_FAMILY_SHIFT,
|
|
(pss_idcode & ZY7_SLCR_PSS_IDCODE_REVISION_MASK) >>
|
|
ZY7_SLCR_PSS_IDCODE_REVISION_SHIFT);
|
|
|
|
zynq_reboot_status = RD4(sc, ZY7_SLCR_REBOOT_STAT);
|
|
|
|
/* Derive PLL frequencies from PS_CLK. */
|
|
node = ofw_bus_get_node(dev);
|
|
if (OF_getencprop(node, "clock-frequency", &cell, sizeof(cell)) > 0)
|
|
ps_clk_frequency = cell;
|
|
else
|
|
ps_clk_frequency = ZYNQ_DEFAULT_PS_CLK_FREQUENCY;
|
|
|
|
arm_pll_ctrl = RD4(sc, ZY7_SLCR_ARM_PLL_CTRL);
|
|
ddr_pll_ctrl = RD4(sc, ZY7_SLCR_DDR_PLL_CTRL);
|
|
io_pll_ctrl = RD4(sc, ZY7_SLCR_IO_PLL_CTRL);
|
|
|
|
/* Determine ARM PLL frequency. */
|
|
if (((arm_pll_ctrl & ZY7_SLCR_PLL_CTRL_BYPASS_QUAL) == 0 &&
|
|
(arm_pll_ctrl & ZY7_SLCR_PLL_CTRL_BYPASS_FORCE) != 0) ||
|
|
((arm_pll_ctrl & ZY7_SLCR_PLL_CTRL_BYPASS_QUAL) != 0 &&
|
|
(bootmode & ZY7_SLCR_BOOT_MODE_PLL_BYPASS) != 0))
|
|
/* PLL is bypassed. */
|
|
arm_pll_frequency = ps_clk_frequency;
|
|
else
|
|
arm_pll_frequency = ps_clk_frequency *
|
|
((arm_pll_ctrl & ZY7_SLCR_PLL_CTRL_FDIV_MASK) >>
|
|
ZY7_SLCR_PLL_CTRL_FDIV_SHIFT);
|
|
|
|
/* Determine DDR PLL frequency. */
|
|
if (((ddr_pll_ctrl & ZY7_SLCR_PLL_CTRL_BYPASS_QUAL) == 0 &&
|
|
(ddr_pll_ctrl & ZY7_SLCR_PLL_CTRL_BYPASS_FORCE) != 0) ||
|
|
((ddr_pll_ctrl & ZY7_SLCR_PLL_CTRL_BYPASS_QUAL) != 0 &&
|
|
(bootmode & ZY7_SLCR_BOOT_MODE_PLL_BYPASS) != 0))
|
|
/* PLL is bypassed. */
|
|
ddr_pll_frequency = ps_clk_frequency;
|
|
else
|
|
ddr_pll_frequency = ps_clk_frequency *
|
|
((ddr_pll_ctrl & ZY7_SLCR_PLL_CTRL_FDIV_MASK) >>
|
|
ZY7_SLCR_PLL_CTRL_FDIV_SHIFT);
|
|
|
|
/* Determine IO PLL frequency. */
|
|
if (((io_pll_ctrl & ZY7_SLCR_PLL_CTRL_BYPASS_QUAL) == 0 &&
|
|
(io_pll_ctrl & ZY7_SLCR_PLL_CTRL_BYPASS_FORCE) != 0) ||
|
|
((io_pll_ctrl & ZY7_SLCR_PLL_CTRL_BYPASS_QUAL) != 0 &&
|
|
(bootmode & ZY7_SLCR_BOOT_MODE_PLL_BYPASS) != 0))
|
|
/* PLL is bypassed. */
|
|
io_pll_frequency = ps_clk_frequency;
|
|
else
|
|
io_pll_frequency = ps_clk_frequency *
|
|
((io_pll_ctrl & ZY7_SLCR_PLL_CTRL_FDIV_MASK) >>
|
|
ZY7_SLCR_PLL_CTRL_FDIV_SHIFT);
|
|
|
|
/* Lock SLCR registers. */
|
|
zy7_slcr_lock(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
zy7_slcr_detach(device_t dev)
|
|
{
|
|
struct zy7_slcr_softc *sc = device_get_softc(dev);
|
|
|
|
bus_generic_detach(dev);
|
|
|
|
/* Release memory resource. */
|
|
if (sc->mem_res != NULL)
|
|
bus_release_resource(dev, SYS_RES_MEMORY,
|
|
rman_get_rid(sc->mem_res), sc->mem_res);
|
|
|
|
zy7_slcr_softc_p = NULL;
|
|
zynq7_cpu_reset = NULL;
|
|
|
|
ZSLCR_LOCK_DESTROY(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static device_method_t zy7_slcr_methods[] = {
|
|
/* device_if */
|
|
DEVMETHOD(device_probe, zy7_slcr_probe),
|
|
DEVMETHOD(device_attach, zy7_slcr_attach),
|
|
DEVMETHOD(device_detach, zy7_slcr_detach),
|
|
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static driver_t zy7_slcr_driver = {
|
|
"zy7_slcr",
|
|
zy7_slcr_methods,
|
|
sizeof(struct zy7_slcr_softc),
|
|
};
|
|
static devclass_t zy7_slcr_devclass;
|
|
|
|
DRIVER_MODULE(zy7_slcr, simplebus, zy7_slcr_driver, zy7_slcr_devclass, 0, 0);
|
|
MODULE_VERSION(zy7_slcr, 1);
|