freebsd-dev/sys/arm/freescale/vybrid/vf_nfc.c
Ian Lepore add35ed5b8 Follow r261352 by updating all drivers which are children of simplebus
to check the status property in their probe routines.

Simplebus used to only instantiate its children whose status="okay"
but that was improper behavior, fixed in r261352.  Now that it doesn't
check anymore and probes all its children; the children all have to
do the check because really only the children know how to properly
interpret their status property strings.

Right now all existing drivers only understand "okay" versus something-
that's-not-okay, so they all use the new ofw_bus_status_okay() helper.
2014-02-02 19:17:28 +00:00

528 lines
12 KiB
C

/*-
* Copyright (c) 2013 Ruslan Bukin <br@bsdpad.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Vybrid Family NAND Flash Controller (NFC)
* Chapter 31, Vybrid Reference Manual, Rev. 5, 07/2013
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/proc.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/malloc.h>
#include <sys/rman.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/time.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <dev/nand/nand.h>
#include <dev/nand/nandbus.h>
#include <machine/bus.h>
#include <machine/fdt.h>
#include "nfc_if.h"
#include <arm/freescale/vybrid/vf_common.h>
enum addr_type {
ADDR_NONE,
ADDR_ID,
ADDR_ROW,
ADDR_ROWCOL
};
struct fsl_nfc_fcm {
uint32_t addr_bits;
enum addr_type addr_type;
uint32_t col_addr_bits;
uint32_t row_addr_bits;
u_int read_ptr;
u_int addr_ptr;
u_int command;
u_int code;
};
struct vf_nand_softc {
struct nand_softc nand_dev;
bus_space_handle_t bsh;
bus_space_tag_t bst;
struct resource *res[2];
struct fsl_nfc_fcm fcm;
};
static struct resource_spec nfc_spec[] = {
{ SYS_RES_MEMORY, 0, RF_ACTIVE },
{ SYS_RES_IRQ, 0, RF_ACTIVE },
{ -1, 0 }
};
static int vf_nand_attach(device_t);
static int vf_nand_probe(device_t);
static int vf_nand_send_command(device_t, uint8_t);
static int vf_nand_send_address(device_t, uint8_t);
static int vf_nand_start_command(device_t);
static uint8_t vf_nand_read_byte(device_t);
static void vf_nand_read_buf(device_t, void *, uint32_t);
static void vf_nand_write_buf(device_t, void *, uint32_t);
static int vf_nand_select_cs(device_t, uint8_t);
static int vf_nand_read_rnb(device_t);
#define CMD_READ_PAGE 0x7EE0
#define CMD_PROG_PAGE 0x7FC0
#define CMD_PROG_PAGE_DMA 0xFFC8
#define CMD_ERASE 0x4EC0
#define CMD_READ_ID 0x4804
#define CMD_READ_STATUS 0x4068
#define CMD_RESET 0x4040
#define CMD_RANDOM_IN 0x7140
#define CMD_RANDOM_OUT 0x70E0
#define CMD_BYTE2_PROG_PAGE 0x10
#define CMD_BYTE2_PAGE_READ 0x30
#define CMD_BYTE2_ERASE 0xD0
#define NFC_CMD1 0x3F00 /* Flash command 1 */
#define NFC_CMD2 0x3F04 /* Flash command 2 */
#define NFC_CAR 0x3F08 /* Column address */
#define NFC_RAR 0x3F0C /* Row address */
#define NFC_RPT 0x3F10 /* Flash command repeat */
#define NFC_RAI 0x3F14 /* Row address increment */
#define NFC_SR1 0x3F18 /* Flash status 1 */
#define NFC_SR2 0x3F1C /* Flash status 2 */
#define NFC_DMA_CH1 0x3F20 /* DMA channel 1 address */
#define NFC_DMACFG 0x3F24 /* DMA configuration */
#define NFC_SWAP 0x3F28 /* Cach swap */
#define NFC_SECSZ 0x3F2C /* Sector size */
#define NFC_CFG 0x3F30 /* Flash configuration */
#define NFC_DMA_CH2 0x3F34 /* DMA channel 2 address */
#define NFC_ISR 0x3F38 /* Interrupt status */
#define ECCMODE_SHIFT 17
#define AIAD_SHIFT 5
#define AIBN_SHIFT 4
#define PAGECOUNT_SHIFT 0
#define BITWIDTH_SHIFT 7
#define BITWIDTH8 0
#define BITWIDTH16 1
#define PAGECOUNT_MASK 0xf
#define CMD2_BYTE1_SHIFT 24
#define CMD2_CODE_SHIFT 8
#define CMD2_BUFNO_SHIFT 1
#define CMD2_START_SHIFT 0
static device_method_t vf_nand_methods[] = {
DEVMETHOD(device_probe, vf_nand_probe),
DEVMETHOD(device_attach, vf_nand_attach),
DEVMETHOD(nfc_start_command, vf_nand_start_command),
DEVMETHOD(nfc_send_command, vf_nand_send_command),
DEVMETHOD(nfc_send_address, vf_nand_send_address),
DEVMETHOD(nfc_read_byte, vf_nand_read_byte),
DEVMETHOD(nfc_read_buf, vf_nand_read_buf),
DEVMETHOD(nfc_write_buf, vf_nand_write_buf),
DEVMETHOD(nfc_select_cs, vf_nand_select_cs),
DEVMETHOD(nfc_read_rnb, vf_nand_read_rnb),
{ 0, 0 },
};
static driver_t vf_nand_driver = {
"nand",
vf_nand_methods,
sizeof(struct vf_nand_softc),
};
static devclass_t vf_nand_devclass;
DRIVER_MODULE(vf_nand, simplebus, vf_nand_driver, vf_nand_devclass, 0, 0);
static int
vf_nand_probe(device_t dev)
{
if (!ofw_bus_status_okay(dev))
return (ENXIO);
if (!ofw_bus_is_compatible(dev, "fsl,mvf600-nand"))
return (ENXIO);
device_set_desc(dev, "Vybrid Family NAND controller");
return (BUS_PROBE_DEFAULT);
}
static int
vf_nand_attach(device_t dev)
{
struct vf_nand_softc *sc;
int err;
int reg;
sc = device_get_softc(dev);
if (bus_alloc_resources(dev, nfc_spec, sc->res)) {
device_printf(dev, "could not allocate resources!\n");
return (ENXIO);
}
sc->bst = rman_get_bustag(sc->res[0]);
sc->bsh = rman_get_bushandle(sc->res[0]);
/* Size in bytes of one elementary transfer unit */
WRITE4(sc, NFC_SECSZ, 2048);
/* Flash mode width */
reg = READ4(sc, NFC_CFG);
reg |= (BITWIDTH16 << BITWIDTH_SHIFT);
/* No correction, ECC bypass */
reg &= ~(0x7 << ECCMODE_SHIFT);
/* Disable Auto-incrementing of flash row address */
reg &= ~(0x1 << AIAD_SHIFT);
/* Disable Auto-incrementing of buffer numbers */
reg &= ~(0x1 << AIBN_SHIFT);
/*
* Number of virtual pages (in one physical flash page)
* to be programmed or read, etc.
*/
reg &= ~(PAGECOUNT_MASK);
reg |= (1 << PAGECOUNT_SHIFT);
WRITE4(sc, NFC_CFG, reg);
nand_init(&sc->nand_dev, dev, NAND_ECC_NONE, 0, 0, NULL, NULL);
err = nandbus_create(dev);
return (err);
}
static int
vf_nand_start_command(device_t dev)
{
struct vf_nand_softc *sc;
struct fsl_nfc_fcm *fcm;
int reg;
sc = device_get_softc(dev);
fcm = &sc->fcm;
nand_debug(NDBG_DRV,"vf_nand: start command %x", fcm->command);
/* CMD2 */
reg = READ4(sc, NFC_CMD2);
reg &= ~(0xff << CMD2_BYTE1_SHIFT);
reg |= (fcm->command << CMD2_BYTE1_SHIFT);
WRITE4(sc, NFC_CMD2, reg);
/* CMD1 */
if ((fcm->command == NAND_CMD_READ) ||
(fcm->command == NAND_CMD_PROG) ||
(fcm->command == NAND_CMD_ERASE)) {
reg = READ4(sc, NFC_CMD1);
reg &= ~(0xff << 24);
if (fcm->command == NAND_CMD_READ)
reg |= (CMD_BYTE2_PAGE_READ << 24);
else if (fcm->command == NAND_CMD_PROG)
reg |= (CMD_BYTE2_PROG_PAGE << 24);
else if (fcm->command == NAND_CMD_ERASE)
reg |= (CMD_BYTE2_ERASE << 24);
WRITE4(sc, NFC_CMD1, reg);
}
/* We work with 1st buffer */
reg = READ4(sc, NFC_CMD2);
reg &= ~(0xf << CMD2_BUFNO_SHIFT);
reg |= (0 << CMD2_BUFNO_SHIFT);
WRITE4(sc, NFC_CMD2, reg);
/* Cmd CODE */
reg = READ4(sc, NFC_CMD2);
reg &= ~(0xffff << CMD2_CODE_SHIFT);
reg |= (fcm->code << CMD2_CODE_SHIFT);
WRITE4(sc, NFC_CMD2, reg);
/* Col */
if (fcm->addr_type == ADDR_ROWCOL) {
reg = READ4(sc, NFC_CAR);
reg &= ~(0xffff);
reg |= fcm->col_addr_bits;
nand_debug(NDBG_DRV,"setting CAR to 0x%08x\n", reg);
WRITE4(sc, NFC_CAR, reg);
}
/* Row */
reg = READ4(sc, NFC_RAR);
reg &= ~(0xffffff);
if (fcm->addr_type == ADDR_ID)
reg |= fcm->addr_bits;
else
reg |= fcm->row_addr_bits;
WRITE4(sc, NFC_RAR, reg);
/* Start */
reg = READ4(sc, NFC_CMD2);
reg |= (1 << CMD2_START_SHIFT);
WRITE4(sc, NFC_CMD2, reg);
/* Wait command completion */
while (READ4(sc, NFC_CMD2) & (1 << CMD2_START_SHIFT))
;
return (0);
}
static int
vf_nand_send_command(device_t dev, uint8_t command)
{
struct vf_nand_softc *sc;
struct fsl_nfc_fcm *fcm;
nand_debug(NDBG_DRV,"vf_nand: send command %x", command);
sc = device_get_softc(dev);
fcm = &sc->fcm;
if ((command == NAND_CMD_READ_END) ||
(command == NAND_CMD_PROG_END) ||
(command == NAND_CMD_ERASE_END)) {
return (0);
}
fcm->command = command;
fcm->code = 0;
fcm->read_ptr = 0;
fcm->addr_type = 0;
fcm->addr_bits = 0;
fcm->addr_ptr = 0;
fcm->col_addr_bits = 0;
fcm->row_addr_bits = 0;
switch (command) {
case NAND_CMD_READ:
fcm->code = CMD_READ_PAGE;
fcm->addr_type = ADDR_ROWCOL;
break;
case NAND_CMD_PROG:
fcm->code = CMD_PROG_PAGE;
fcm->addr_type = ADDR_ROWCOL;
break;
case NAND_CMD_PROG_END:
break;
case NAND_CMD_ERASE_END:
break;
case NAND_CMD_RESET:
fcm->code = CMD_RESET;
break;
case NAND_CMD_READ_ID:
fcm->code = CMD_READ_ID;
fcm->addr_type = ADDR_ID;
break;
case NAND_CMD_READ_PARAMETER:
fcm->code = CMD_READ_PAGE;
fcm->addr_type = ADDR_ID;
break;
case NAND_CMD_STATUS:
fcm->code = CMD_READ_STATUS;
break;
case NAND_CMD_ERASE:
fcm->code = CMD_ERASE;
fcm->addr_type = ADDR_ROW;
break;
default:
nand_debug(NDBG_DRV, "unknown command %d\n", command);
return (1);
}
return (0);
}
static int
vf_nand_send_address(device_t dev, uint8_t addr)
{
struct vf_nand_softc *sc;
struct fsl_nfc_fcm *fcm;
nand_debug(NDBG_DRV,"vf_nand: send address %x", addr);
sc = device_get_softc(dev);
fcm = &sc->fcm;
nand_debug(NDBG_DRV, "setting addr #%d to 0x%02x\n", fcm->addr_ptr, addr);
if (fcm->addr_type == ADDR_ID) {
fcm->addr_bits = addr;
} else if (fcm->addr_type == ADDR_ROWCOL) {
if (fcm->addr_ptr < 2)
fcm->col_addr_bits |= (addr << (fcm->addr_ptr * 8));
else
fcm->row_addr_bits |= (addr << ((fcm->addr_ptr - 2) * 8));
} else if (fcm->addr_type == ADDR_ROW)
fcm->row_addr_bits |= (addr << (fcm->addr_ptr * 8));
fcm->addr_ptr += 1;
return (0);
}
static uint8_t
vf_nand_read_byte(device_t dev)
{
struct vf_nand_softc *sc;
struct fsl_nfc_fcm *fcm;
uint8_t data;
int sr1, sr2;
int b;
sc = device_get_softc(dev);
fcm = &sc->fcm;
sr1 = READ4(sc, NFC_SR1);
sr2 = READ4(sc, NFC_SR2);
data = 0;
if (fcm->addr_type == ADDR_ID) {
b = 32 - ((fcm->read_ptr + 1) * 8);
data = (sr1 >> b) & 0xff;
fcm->read_ptr++;
} else if (fcm->command == NAND_CMD_STATUS) {
data = sr2 & 0xff;
}
nand_debug(NDBG_DRV,"vf_nand: read %x", data);
return (data);
}
static void
vf_nand_read_buf(device_t dev, void* buf, uint32_t len)
{
struct vf_nand_softc *sc;
struct fsl_nfc_fcm *fcm;
uint16_t *tmp;
uint8_t *b;
int i;
b = (uint8_t*)buf;
sc = device_get_softc(dev);
fcm = &sc->fcm;
nand_debug(NDBG_DRV, "vf_nand: read_buf len %d", len);
if (fcm->command == NAND_CMD_READ_PARAMETER) {
tmp = malloc(len, M_DEVBUF, M_NOWAIT);
bus_read_region_2(sc->res[0], 0x0, tmp, len);
for (i = 0; i < len; i += 2) {
b[i] = tmp[i+1];
b[i+1] = tmp[i];
}
free(tmp, M_DEVBUF);
#ifdef NAND_DEBUG
for (i = 0; i < len; i++) {
if (!(i % 16))
printf("%s", i == 0 ? "vf_nand:\n" : "\n");
printf(" %x", b[i]);
if (i == len - 1)
printf("\n");
}
#endif
} else {
for (i = 0; i < len; i++) {
b[i] = READ1(sc, i);
#ifdef NAND_DEBUG
if (!(i % 16))
printf("%s", i == 0 ? "vf_nand:\n" : "\n");
printf(" %x", b[i]);
if (i == len - 1)
printf("\n");
#endif
}
}
}
static void
vf_nand_write_buf(device_t dev, void* buf, uint32_t len)
{
struct vf_nand_softc *sc;
struct fsl_nfc_fcm *fcm;
uint8_t *b;
int i;
b = (uint8_t*)buf;
sc = device_get_softc(dev);
fcm = &sc->fcm;
nand_debug(NDBG_DRV,"vf_nand: write_buf len %d", len);
for (i = 0; i < len; i++) {
WRITE1(sc, i, b[i]);
#ifdef NAND_DEBUG
if (!(i % 16))
printf("%s", i == 0 ? "vf_nand:\n" : "\n");
printf(" %x", b[i]);
if (i == len - 1)
printf("\n");
#endif
}
}
static int
vf_nand_select_cs(device_t dev, uint8_t cs)
{
if (cs > 0)
return (ENODEV);
return (0);
}
static int
vf_nand_read_rnb(device_t dev)
{
/* no-op */
return (0); /* ready */
}