freebsd-dev/sys/i386/isa
wollman 56c4e14a34 Reduce jitter of Pentium microtime() implementation by letting the counter
free-run and doing a subtract in microtime() rather than resetting the
counter to zero at every clock tick.  In combination with the changes to
kern_clock.c, this should eliminate all the immediately obvious sources
of systematic jitter in timekeeping on Pentium machines.
1995-10-12 20:39:49 +00:00
..
ic Rewrite: 1995-07-05 12:15:52 +00:00
matcd o Support for CDIOCPREVENT and CDIOCALLOW ioctls that xcdplayer 1995-09-28 13:15:49 +00:00
pcvt Fix FAT_CURSOR to give scanlines 0-15 instead of (the current start)-15. 1995-09-28 18:43:40 +00:00
sound Make dsp0 work for playback. 1995-09-15 22:04:03 +00:00
aha1542.c Support the 1542CP by recognizing the new ID. Try to make future 1995-10-01 15:09:51 +00:00
aha1742.c Fix benign type mismatches in isa interrupt handlers. Many returned int 1995-09-19 18:55:37 +00:00
aha2742.c Make the sequencer code a .c file instead of a .h file. 1994-11-18 08:14:16 +00:00
aic6360.c Fix benign type mismatches in isa interrupt handlers. Many returned int 1995-09-19 18:55:37 +00:00
aic7770.c ahcprobe now takes a flags argument. For EISA/VL adapters set it to 1995-09-05 23:39:31 +00:00
asc.c Added devfs nodes for other devices.. (didn't read the docs correctly) 1995-09-08 19:01:28 +00:00
ascreg.h added ID strings so we know what version we have... 1995-09-08 18:30:34 +00:00
atapi.c Bring IDE CDROM support up to latest version (1.8a?) from Serge. 1995-09-30 00:11:19 +00:00
atapi.h Bring IDE CDROM support up to latest version (1.8a?) from Serge. 1995-09-30 00:11:19 +00:00
b004.c Fix benign type mismatches in devswitch functions. 1995-10-10 08:03:26 +00:00
b004.h Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
bt742a.c Fix benign type mismatches in isa interrupt handlers. Many returned int 1995-09-19 18:55:37 +00:00
clock.c Reduce jitter of Pentium microtime() implementation by letting the counter 1995-10-12 20:39:49 +00:00
creative.h Changes to incorporate the Matsushita CDROM driver (otherwise known as 1995-03-02 04:07:03 +00:00
cronyx.c Remove bogus includes that became fatal after the previous (intended to 1995-10-10 05:41:39 +00:00
ctx.c Fix benign type mismatches in devsw functions. 82 out of 299 devsw 1995-09-08 11:09:15 +00:00
ctxreg.h Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
cx.c Restore my changes from revisions 1.8, 1.9 and 1.10. They were blown away 1995-10-07 20:07:18 +00:00
cxreg.h Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
cy.c Fix probe to work properly with the Cyclades cyclom-16Ye. 1995-10-11 02:41:13 +00:00
cyreg.h Rewrite: 1995-07-05 12:15:52 +00:00
diskslice_machdep.c Don't clip d_ncylinders to value used by partitions. 1995-08-23 11:43:45 +00:00
elink.c Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
elink.h
fd.c BIOS manufacturers don't seem to have a unique idea about 2.88 MB 1995-10-09 15:00:39 +00:00
fdc.h Peter's work to work around one of the most annoying bugs in the 1995-01-06 15:20:00 +00:00
fdreg.h
ft.c Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
ftreg.h
gpib.c Fix benign type mismatches in devsw functions. 82 out of 299 devsw 1995-09-08 11:09:15 +00:00
gpib.h Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
gpibreg.h Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
gsc.c Declare `geomtab' as static. It was bogusly shared between the asc and 1995-09-08 16:38:52 +00:00
gscreg.h Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
icu.h Laptop Advanced Power Management support by HOSOKAWA Tatsumi. 1994-10-01 02:56:21 +00:00
icu.s Multiplex the soft tty interrupt some more to support the cy driver. 1995-07-05 14:35:34 +00:00
if_cx.c This upgrades the driver for Cronyx-Sigma multiplexor boards 1995-10-04 22:24:16 +00:00
if_ed.c PCCARD support. 1995-10-10 09:52:55 +00:00
if_edreg.h if_ze.c was derived from if_ed.c about 42 (!) versions ago. It is now 1995-09-26 08:57:47 +00:00
if_eg.c Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
if_egreg.h Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
if_el.c Merge RELENG_2_0_5 into HEAD 1995-06-11 19:33:05 +00:00
if_elreg.h
if_ep.c Add SIOCGIFADDR ioctl so rarpd actually works with the if_ep interface. 1995-08-28 12:01:17 +00:00
if_epreg.h Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
if_fe.c Make everything except the unsupported network sources compile cleanly 1995-08-16 16:14:28 +00:00
if_fereg.h Added `fe' device drive r for Fujitsu MB86960A family. 1995-04-23 18:31:50 +00:00
if_ie507.h
if_ie.c Fix benign type mismatches in isa interrupt handlers. Many returned int 1995-09-19 18:55:37 +00:00
if_iereg.h
if_is.c Move ARP interface initialization into if_ether.c:arp_ifinit(). 1994-12-22 21:56:22 +00:00
if_isreg.h
if_ix.c 1) Fixed irq logic so that it uses the kernel configured irq if it doesn't 1995-10-05 03:01:13 +00:00
if_ixreg.h Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
if_le.c Fix benign type mismatches in isa interrupt handlers. Many returned int 1995-09-19 18:55:37 +00:00
if_lnc.c Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
if_lnc.h New AMD family ethernet driver. Should support BICC,NE2100, TNIC, 1994-10-02 21:14:38 +00:00
if_ze.c if_ze.c was derived from if_ed.c about 42 (!) versions ago. It is now 1995-09-26 08:57:47 +00:00
if_zereg.h Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
if_zp.c Fix the 3C589 driver to work with the BNC connector. 1995-08-16 23:34:28 +00:00
if_zpreg.h Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
isa_device.h Make pcvt and syscons live in the same kernel. If both are enabled, then 1995-09-10 21:36:12 +00:00
isa.c Killed isa_allocphysmem() and isa_freephysmem(). They are completely used 1995-09-15 03:10:06 +00:00
isa.h Submitted by: Luigi Rizzo (luigi@iet.unipi.it) 1995-09-08 03:14:00 +00:00
iso8859.font Changed header slightly. 1994-09-29 08:29:21 +00:00
joy.c Actually, 97 out of 304 devsw functions had benignly mismatched types. 1995-09-08 19:57:13 +00:00
kbd.h Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
kbdtables.h Change fkey 63 from ^[[K to ^[[~. 1995-03-28 21:30:13 +00:00
labpc.c Make everything except the unsupported network sources compile cleanly 1995-08-16 16:14:28 +00:00
lpt.c Add BPF and IP multicast capabilities to the tun' and lp' network 1995-09-25 16:57:54 +00:00
lptreg.h
matcd.c "matcd interface " -> "matcd"; this makes userconfig work again and 1995-03-28 08:04:07 +00:00
matcd.h Changes to incorporate the Matsushita CDROM driver (otherwise known as 1995-03-02 04:07:03 +00:00
mcd.c Fix benign type mismatches in devsw functions. 82 out of 299 devsw 1995-09-08 11:09:15 +00:00
mcdreg.h Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
mse.c Fix benign type mismatches in devsw functions. 82 out of 299 devsw 1995-09-08 11:09:15 +00:00
ncr5380.c Fix benign type mismatches in isa interrupt handlers. Many returned int 1995-09-19 18:55:37 +00:00
npx.c Fix benign type mismatches in isa interrupt handlers. Many returned int 1995-09-19 18:55:37 +00:00
npx.c.orig New AMD family ethernet driver. Should support BICC,NE2100, TNIC, 1994-10-02 21:14:38 +00:00
options.h Changes to incorporate the Matsushita CDROM driver (otherwise known as 1995-03-02 04:07:03 +00:00
pas.c Finished device configuration database work for all ISA devices (except `ze') 1994-10-23 21:28:03 +00:00
pcaudio.c Fix benign type mismatches in devsw functions. 82 out of 299 devsw 1995-09-08 11:09:15 +00:00
pcibus.c Fix bad typo: CONF1_ENABLE_RES1 was written CONF1_ENABLE_CHK1 ... 1995-10-09 21:56:24 +00:00
pcic.c Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
pcic.h Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
psm.c The cmd' and addr' args to psmioctl() were in the wrong order. This 1995-09-05 06:23:39 +00:00
rc.c Allow any speed from 0..76800 1995-08-02 10:17:35 +00:00
rcreg.h Allow any speed from 0..76800 1995-08-02 10:17:35 +00:00
readMBR.c Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
README.le Fixed a mis-spelling. 1994-11-13 21:19:18 +00:00
rtc.h BIOS manufacturers don't seem to have a unique idea about 2.88 MB 1995-10-09 15:00:39 +00:00
scd.c Fix benign type mismatches in isa interrupt handlers. Many returned int 1995-09-19 18:55:37 +00:00
scdreg.h Bring in the new non-GPL'd driver from Mikael Hybsch. This version is 1995-03-24 18:33:02 +00:00
seagate.c Fix benign type mismatches in isa interrupt handlers. Many returned int 1995-09-19 18:55:37 +00:00
si_code.c Drat! I forgot to add this part of the Specialix Driver.. 1995-08-10 08:10:57 +00:00
si.c Add some hooks visible from outside via nlist, so pstat can read the tty 1995-09-22 20:00:12 +00:00
sio.c siostop() is a void function, so don't return a value. 1995-09-24 04:59:16 +00:00
sioreg.h Submitted by: Bill Paul (wpaul@ctr.columbia.edu) 1995-01-20 07:34:18 +00:00
sireg.h Bring in my long-overdue version of the Specialix driver. 1995-08-09 13:13:47 +00:00
spigot.c Fix benign type mismatches in devsw functions. 82 out of 299 devsw 1995-09-08 11:09:15 +00:00
spkr.c Fixed init functions argument type - caddr_t -> void *. Fixed a couple of 1995-09-09 18:10:37 +00:00
syscons.c Make pcvt and syscons live in the same kernel. If both are enabled, then 1995-09-10 21:36:12 +00:00
syscons.h Make pcvt and syscons live in the same kernel. If both are enabled, then 1995-09-10 21:36:12 +00:00
timerreg.h
tw.c Fix benign type mismatches in devsw functions. 82 out of 299 devsw 1995-09-08 11:09:15 +00:00
ultra14f.c Fix benign type mismatches in isa interrupt handlers. Many returned int 1995-09-19 18:55:37 +00:00
vector.s Don't waste time sending an EOI to ICU1 if option AUTO_EOI_1 is defined. 1995-04-15 21:32:18 +00:00
wcd.c Bring IDE CDROM support up to latest version (1.8a?) from Serge. 1995-09-30 00:11:19 +00:00
wd7000.c Fix benign type mismatches in isa interrupt handlers. Many returned int 1995-09-19 18:55:37 +00:00
wd.c Make ATAPI support completely optional - if ATAPI isn't defined, the 1995-09-30 15:19:44 +00:00
wdreg.h Fixes and improvements from John Dyson: 1995-03-22 05:23:01 +00:00
wt.c Fix benign type mismatches in devsw functions. 82 out of 299 devsw 1995-09-08 11:09:15 +00:00
wtreg.h Remove trailing whitespace. 1995-05-30 08:16:23 +00:00

$Id: README.le,v 1.1 1994/10/01 20:15:43 wollman Exp $

----------------

This driver is in no way supported by Digital Equipment.  See the
disclaimers in the sources for more.

This driver supports all the DEC EtherWORKS III NICs (DE203, DE204,
and DE205) and the later DEC EtherWORKS II NICs (DE200, DE201, DE202,
DE422).  DEPCA-style boards prior to the DE200 have not been tested
and may not work.  

This driver is not EISA aware.  If you are using a DE422 or have
configured the EtherWORKS III in EISA mode, make sure you specify
the I/O port properly as this driver will *not* probe for it.
(The I/O port should be 0xNc00 where N is the EISA slot number).

This driver does not yet use the full 128KB allowed by the DE422.
Someday, it might. For EtherWORKS III NICs, the driver will override
the EEPROM setting of MemoryMode and *always* use the 2K for best
results.

The driver includes full support for both BPF and IP Multicast.

[All paths are relative to the top of sys source area, usually
/usr/src/sys.]

The following files need to be moved into their respective
directories:

	if_le.c	   -->	i386/isa
	am7990.h   -->	i386/isa/ic
	lemac.h	   -->	i386/isa/ic

You will need to apply the patch provided in pat.files.i386 to
i386/conf/files.i386 file.

After that is done you will need to edit your config file (in
i386/conf) and a line similar to:

device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr

[The above line assumes the board is still at the factory defaults.]
Change the port, irq, and iomem value if needed to your configuration.

Now you are ready to rebuild your kernel, reboot, and see if the
driver can configure your board.  When the system boots, you will
hopefully something close to:

    EtherWORKS II:

	le0 at 0x300-0x30f irq 5 maddr 0xd0000 msize 65536 on isa
	le0: DE202 ethernet address 08:00:2b:2d:c8:45
	bpf: le0 attached

    EtherWORKS III:

	le0 at 0x320-0x33f irq 5 maddr 0xd0000 msize 2048 on isa
	le0: DE205-AB ethernet address 08:00:2b:bb:23:e0
	le0 attached

in the startup log.  If so, the board configured properly and
should be ready to use.

--
Mail:	thomas@lkg.dec.com
URL:	http://ftp.digital.com/~thomas/