dad3b6c6fd
frequency generation and what frequency the generated was anyones guess. In general the 32.768kHz RTC clock x-tal was the best, because that was a regular wrist-watch Xtal, whereas the X-tal generating the ISA bus frequency was much lower quality, often costing as much as several cents a piece, so it made good sense to check the ISA bus frequency against the RTC clock. The other relevant property of those machines, is that they typically had no more than 16MB RAM. These days, CPU chips croak if their clocks are not tightly within specs and all necessary frequencies are derived from the master crystal by means if PLL's. Considering that it takes on average 1.5 second to calibrate the frequency of the i8254 counter, that more likely than not, we will not actually use the result of the calibration, and as the final clincher, we seldom use the i8254 for anything besides BEL in syscons anyway, it has become time to drop the calibration code. If you need to tell the system what frequency your i8254 runs, you can do so from the loader using hw.i8254.freq or using the sysctl kern.timecounter.tc.i8254.frequency.
152 lines
3.6 KiB
Plaintext
152 lines
3.6 KiB
Plaintext
# $FreeBSD$
|
|
# Options specific to the i386 platform kernels
|
|
|
|
AUTO_EOI_1 opt_auto_eoi.h
|
|
AUTO_EOI_2 opt_auto_eoi.h
|
|
BROKEN_KEYBOARD_RESET opt_reset.h
|
|
COUNT_XINVLTLB_HITS opt_smp.h
|
|
COUNT_IPIS opt_smp.h
|
|
DISABLE_PG_G opt_pmap.h
|
|
DISABLE_PSE opt_pmap.h
|
|
I586_PMC_GUPROF opt_i586_guprof.h
|
|
MAXMEM
|
|
MPTABLE_FORCE_HTT
|
|
MP_WATCHDOG
|
|
PERFMON
|
|
PMAP_SHPGPERPROC opt_pmap.h
|
|
POWERFAIL_NMI opt_trap.h
|
|
|
|
# Options for emulators. These should only be used at config time, so
|
|
# they are handled like options for static filesystems
|
|
# (see src/sys/conf/options), except for broken debugging options.
|
|
COMPAT_AOUT opt_dontuse.h
|
|
IBCS2 opt_dontuse.h
|
|
COMPAT_LINUX opt_dontuse.h
|
|
COMPAT_SVR4 opt_dontuse.h
|
|
DEBUG_SVR4 opt_svr4.h
|
|
LINPROCFS opt_dontuse.h
|
|
LINSYSFS opt_dontuse.h
|
|
NDISAPI opt_dontuse.h
|
|
PECOFF_DEBUG opt_pecoff.h
|
|
PECOFF_SUPPORT opt_dontuse.h
|
|
|
|
# Change KVM size. Changes things all over the kernel.
|
|
KVA_PAGES opt_global.h
|
|
|
|
# Physical address extensions and support for >4G ram. As above.
|
|
PAE opt_global.h
|
|
|
|
TIMER_FREQ opt_clock.h
|
|
|
|
CPU_ATHLON_SSE_HACK opt_cpu.h
|
|
CPU_BLUELIGHTNING_3X opt_cpu.h
|
|
CPU_BLUELIGHTNING_FPU_OP_CACHE opt_cpu.h
|
|
CPU_BTB_EN opt_cpu.h
|
|
CPU_CYRIX_NO_LOCK opt_cpu.h
|
|
CPU_DIRECT_MAPPED_CACHE opt_cpu.h
|
|
CPU_DISABLE_5X86_LSSER opt_cpu.h
|
|
CPU_DISABLE_CMPXCHG opt_global.h # XXX global, unlike other CPU_*
|
|
CPU_DISABLE_SSE opt_cpu.h
|
|
CPU_ELAN opt_cpu.h
|
|
CPU_ELAN_PPS opt_cpu.h
|
|
CPU_ELAN_XTAL opt_cpu.h
|
|
CPU_ENABLE_LONGRUN opt_cpu.h
|
|
CPU_FASTER_5X86_FPU opt_cpu.h
|
|
CPU_GEODE opt_cpu.h
|
|
CPU_I486_ON_386 opt_cpu.h
|
|
CPU_IORT opt_cpu.h
|
|
CPU_L2_LATENCY opt_cpu.h
|
|
CPU_LOOP_EN opt_cpu.h
|
|
CPU_PPRO2CELERON opt_cpu.h
|
|
CPU_RSTK_EN opt_cpu.h
|
|
CPU_SOEKRIS opt_cpu.h
|
|
CPU_SUSP_HLT opt_cpu.h
|
|
CPU_UPGRADE_HW_CACHE opt_cpu.h
|
|
CPU_WT_ALLOC opt_cpu.h
|
|
CYRIX_CACHE_REALLY_WORKS opt_cpu.h
|
|
CYRIX_CACHE_WORKS opt_cpu.h
|
|
NO_F00F_HACK opt_cpu.h
|
|
NO_MEMORY_HOLE opt_cpu.h
|
|
|
|
# The CPU type affects the endian conversion functions all over the kernel.
|
|
I486_CPU opt_global.h
|
|
I586_CPU opt_global.h
|
|
I686_CPU opt_global.h
|
|
|
|
# options for serial support
|
|
COM_ESP opt_sio.h
|
|
COM_MULTIPORT opt_sio.h
|
|
CONSPEED opt_sio.h
|
|
GDBSPEED opt_sio.h
|
|
COM_NO_ACPI opt_sio.h
|
|
|
|
VGA_ALT_SEQACCESS opt_vga.h
|
|
VGA_DEBUG opt_vga.h
|
|
VGA_NO_FONT_LOADING opt_vga.h
|
|
VGA_NO_MODE_CHANGE opt_vga.h
|
|
VGA_SLOW_IOACCESS opt_vga.h
|
|
VGA_WIDTH90 opt_vga.h
|
|
|
|
VESA
|
|
VESA_DEBUG opt_vesa.h
|
|
|
|
PSM_DEBUG opt_psm.h
|
|
PSM_HOOKRESUME opt_psm.h
|
|
PSM_RESETAFTERSUSPEND opt_psm.h
|
|
|
|
ATKBD_DFLT_KEYMAP opt_atkbd.h
|
|
|
|
# Video spigot
|
|
SPIGOT_UNSECURE opt_spigot.h
|
|
|
|
# Enables NETGRAPH support for Cronyx adapters
|
|
NETGRAPH_CRONYX opt_ng_cronyx.h
|
|
|
|
# -------------------------------
|
|
# isdn4bsd: passive ISA cards
|
|
# -------------------------------
|
|
TEL_S0_8 opt_i4b.h
|
|
TEL_S0_16 opt_i4b.h
|
|
TEL_S0_16_3 opt_i4b.h
|
|
AVM_A1 opt_i4b.h
|
|
USR_STI opt_i4b.h
|
|
ITKIX1 opt_i4b.h
|
|
ELSA_PCC16 opt_i4b.h
|
|
# -------------------------------
|
|
# isdn4bsd: passive ISA PnP cards
|
|
# -------------------------------
|
|
CRTX_S0_P opt_i4b.h
|
|
DRN_NGO opt_i4b.h
|
|
TEL_S0_16_3_P opt_i4b.h
|
|
SEDLBAUER opt_i4b.h
|
|
DYNALINK opt_i4b.h
|
|
ASUSCOM_IPAC opt_i4b.h
|
|
ELSA_QS1ISA opt_i4b.h
|
|
SIEMENS_ISURF2 opt_i4b.h
|
|
EICON_DIVA opt_i4b.h
|
|
COMPAQ_M610 opt_i4b.h
|
|
# -------------------------------
|
|
# isdn4bsd: passive PCI cards
|
|
# -------------------------------
|
|
ELSA_QS1PCI opt_i4b.h
|
|
# -------------------------------
|
|
# isdn4bsd: misc options
|
|
# -------------------------------
|
|
# temporary workaround for SMP machines
|
|
I4B_SMP_WORKAROUND opt_i4b.h
|
|
# enable VJ compression code for ipr i/f
|
|
#XXXBZ#IPR_VJ opt_i4b.h
|
|
#XXXBZ#IPR_LOG opt_i4b.h
|
|
|
|
# Device options
|
|
DEV_APIC opt_apic.h
|
|
DEV_NPX opt_npx.h
|
|
ASR_COMPAT opt_asr.h
|
|
|
|
# Debugging
|
|
NPX_DEBUG opt_npx.h
|
|
STOP_NMI opt_cpu.h
|
|
|
|
# BPF just-in-time compiler
|
|
BPF_JITTER opt_bpf.h
|