freebsd-dev/sys/pci/if_mxreg.h
wpaul 40da8227d3 Fix support for the PNIC II. Earlier I had assumed that the PNIC II was
similar to the PNIC I (supported by the pn driver). In fact, it's really
a Macronix 98715A with wake on LAN support added. According to LinkSys,
the PNIC II was jointly developed by Lite-On and Macronis. I get the
feeling Macronix did most of the work. (The datasheet has the Macronix
logo on it, and is in fact nearly identical to the 98715 datasheet, except
for the extra wake on LAN registers.) In any case, the PNIC II works just
fine with the Macronix driver.

The changes are:

- Move PCI ID for the PNIC II from the pn driver to the mx driver.
- Mention PNIC II support in mx.4.
- Mention PNIC II support in RELNOTES.TXT and HARDWARE.TXT.
1999-05-28 18:43:25 +00:00

725 lines
22 KiB
C

/*
* Copyright (c) 1997, 1998
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*
* $Id: if_mxreg.h,v 1.6 1999/05/26 23:01:48 gallatin Exp $
*/
/*
* Macronix register definitions.
*/
#define MX_BUSCTL 0x00 /* bus control */
#define MX_TXSTART 0x08 /* tx start demand */
#define MX_RXSTART 0x10 /* rx start demand */
#define MX_RXADDR 0x18 /* rx descriptor list start addr */
#define MX_TXADDR 0x20 /* tx descriptor list start addr */
#define MX_ISR 0x28 /* interrupt status register */
#define MX_NETCFG 0x30 /* network config register */
#define MX_IMR 0x38 /* interrupt mask */
#define MX_FRAMESDISCARDED 0x40 /* # of discarded frames */
#define MX_SIO 0x48 /* MII and ROM/EEPROM access */
#define MX_RESERVED 0x50
#define MX_TIMER 0x58 /* general timer */
#define MX_10BTSTAT 0x60
#define MX_SIARESET 0x68
#define MX_10BTCTRL 0x70
#define MX_WATCHDOG 0x78
#define MX_MAGICPACKET 0x80
#define MX_NWAYSTAT 0xA0
/*
* These are magic values that must be written into CSR16
* (MX_MAGICPACKET) in order to put the chip into proper
* operating mode. The magic numbers are documented in the
* Macronix 98715 application notes.
*/
#define MX_MAGIC_98713 0x0F370000
#define MX_MAGIC_98713A 0x0B3C0000
#define MX_MAGIC_98715 0x0B3C0000
#define MX_MAGIC_98725 0x0B3C0000
#define MX_REVISION_98713 0x00
#define MX_REVISION_98713A 0x10
#define MX_REVISION_98715 0x20
#define MX_REVISION_98725 0x30
/*
* As far as the driver is concerned, there are two 'types' of
* chips to be concerned with. One is a 98713 with an external
* PHY on the MII. The other covers pretty much everything else,
* since all the other Macronix chips have built-in transceivers.
* This type setting governs what which mode selection routines
* we use (MII or built-in). It also govers which of the 'magic'
* numbers we write into CSR16.
*/
#define MX_TYPE_98713 0x1
#define MX_TYPE_98713A 0x2
#define MX_TYPE_987x5 0x3
/*
* Bus control bits.
*/
#define MX_BUSCTL_RESET 0x00000001
#define MX_BUSCTL_ARBITRATION 0x00000002
#define MX_BUSCTL_SKIPLEN 0x0000007C
#define MX_BUSCTL_BUF_BIGENDIAN 0x00000080
#define MX_BUSCTL_BURSTLEN 0x00003F00
#define MX_BUSCTL_CACHEALIGN 0x0000C000
#define MX_BUSCTL_TXPOLL 0x000E0000
#define MX_BUSCTL_MUSTBEONE 0x04000000
#define MX_SKIPLEN_1LONG 0x00000004
#define MX_SKIPLEN_2LONG 0x00000008
#define MX_SKIPLEN_3LONG 0x00000010
#define MX_SKIPLEN_4LONG 0x00000020
#define MX_SKIPLEN_5LONG 0x00000040
#define MX_CACHEALIGN_NONE 0x00000000
#define MX_CACHEALIGN_8LONG 0x00004000
#define MX_CACHEALIGN_16LONG 0x00008000
#define MX_CACHEALIGN_32LONG 0x0000C000
#define MX_BURSTLEN_USECA 0x00000000
#define MX_BURSTLEN_1LONG 0x00000100
#define MX_BURSTLEN_2LONG 0x00000200
#define MX_BURSTLEN_4LONG 0x00000400
#define MX_BURSTLEN_8LONG 0x00000800
#define MX_BURSTLEN_16LONG 0x00001000
#define MX_BURSTLEN_32LONG 0x00002000
#define MX_TXPOLL_OFF 0x00000000
#define MX_TXPOLL_200U 0x00020000
#define MX_TXPOLL_800U 0x00040000
#define MX_TXPOLL_1600U 0x00060000
#define MX_BUSCTL_CONFIG (MX_BUSCTL_ARBITRATION|MX_CACHEALIGN_8LONG| \
MX_BURSTLEN_8LONG)
/*
* Interrupt status bits.
*/
#define MX_ISR_TX_OK 0x00000001
#define MX_ISR_TX_IDLE 0x00000002
#define MX_ISR_TX_NOBUF 0x00000004
#define MX_ISR_TX_JABBERTIMEO 0x00000008
#define MX_ISR_LINKGOOD 0x00000010
#define MX_ISR_TX_UNDERRUN 0x00000020
#define MX_ISR_RX_OK 0x00000040
#define MX_ISR_RX_NOBUF 0x00000080
#define MX_ISR_RX_READ 0x00000100
#define MX_ISR_RX_WATDOGTIMEO 0x00000200
#define MX_ISR_TX_EARLY 0x00000400
#define MX_ISR_TIMER_EXPIRED 0x00000800
#define MX_ISR_LINKFAIL 0x00001000
#define MX_ISR_BUS_ERR 0x00002000
#define MX_ISR_RX_EARLY 0x00004000
#define MX_ISR_ABNORMAL 0x00008000
#define MX_ISR_NORMAL 0x00010000
#define MX_ISR_RX_STATE 0x000E0000
#define MX_ISR_TX_STATE 0x00700000
#define MX_ISR_BUSERRTYPE 0x03800000
#define MX_ISR_100MBPSLINK 0x08000000
#define MX_ISR_MAGICKPACK 0x10000000
#define MX_RXSTATE_STOPPED 0x00000000 /* 000 - Stopped */
#define MX_RXSTATE_FETCH 0x00020000 /* 001 - Fetching descriptor */
#define MX_RXSTATE_ENDCHECK 0x00040000 /* 010 - check for rx end */
#define MX_RXSTATE_WAIT 0x00060000 /* 011 - waiting for packet */
#define MX_RXSTATE_SUSPEND 0x00080000 /* 100 - suspend rx */
#define MX_RXSTATE_CLOSE 0x000A0000 /* 101 - close tx desc */
#define MX_RXSTATE_FLUSH 0x000C0000 /* 110 - flush from FIFO */
#define MX_RXSTATE_DEQUEUE 0x000E0000 /* 111 - dequeue from FIFO */
#define MX_TXSTATE_RESET 0x00000000 /* 000 - reset */
#define MX_TXSTATE_FETCH 0x00100000 /* 001 - fetching descriptor */
#define MX_TXSTATE_WAITEND 0x00200000 /* 010 - wait for tx end */
#define MX_TXSTATE_READING 0x00300000 /* 011 - read and enqueue */
#define MX_TXSTATE_RSVD 0x00400000 /* 100 - reserved */
#define MX_TXSTATE_SETUP 0x00500000 /* 101 - setup packet */
#define MX_TXSTATE_SUSPEND 0x00600000 /* 110 - suspend tx */
#define MX_TXSTATE_CLOSE 0x00700000 /* 111 - close tx desc */
/*
* Network config bits.
*/
#define MX_NETCFG_RX_HASHPERF 0x00000001
#define MX_NETCFG_RX_ON 0x00000002
#define MX_NETCFG_RX_HASHONLY 0x00000004
#define MX_NETCFG_RX_BADFRAMES 0x00000008
#define MX_NETCFG_RX_INVFILT 0x00000010
#define MX_NETCFG_BACKOFFCNT 0x00000020
#define MX_NETCFG_RX_PROMISC 0x00000040
#define MX_NETCFG_RX_ALLMULTI 0x00000080
#define MX_NETCFG_FULLDUPLEX 0x00000200
#define MX_NETCFG_LOOPBACK 0x00000C00
#define MX_NETCFG_FORCECOLL 0x00001000
#define MX_NETCFG_TX_ON 0x00002000
#define MX_NETCFG_TX_THRESH 0x0000C000
#define MX_NETCFG_TX_BACKOFF 0x00020000
#define MX_NETCFG_PORTSEL 0x00040000 /* 0 == 10, 1 == 100 */
#define MX_NETCFG_HEARTBEAT 0x00080000
#define MX_NETCFG_STORENFWD 0x00200000
#define MX_NETCFG_SPEEDSEL 0x00400000 /* 1 == 10, 0 == 100 */
#define MX_NETCFG_PCS 0x00800000
#define MX_NETCFG_SCRAMBLER 0x01000000
#define MX_NETCFG_NO_RXCRC 0x02000000
#define MX_OPMODE_NORM 0x00000000
#define MX_OPMODE_INTLOOP 0x00000400
#define MX_OPMODE_EXTLOOP 0x00000800
#define MX_TXTHRESH_72BYTES 0x00000000
#define MX_TXTHRESH_96BYTES 0x00004000
#define MX_TXTHRESH_128BYTES 0x00008000
#define MX_TXTHRESH_160BYTES 0x0000C000
/*
* Interrupt mask bits.
*/
#define MX_IMR_TX_OK 0x00000001
#define MX_IMR_TX_IDLE 0x00000002
#define MX_IMR_TX_NOBUF 0x00000004
#define MX_IMR_TX_JABBERTIMEO 0x00000008
#define MX_IMR_LINKGOOD 0x00000010
#define MX_IMR_TX_UNDERRUN 0x00000020
#define MX_IMR_RX_OK 0x00000040
#define MX_IMR_RX_NOBUF 0x00000080
#define MX_IMR_RX_READ 0x00000100
#define MX_IMR_RX_WATDOGTIMEO 0x00000200
#define MX_IMR_TX_EARLY 0x00000400
#define MX_IMR_TIMER_EXPIRED 0x00000800
#define MX_IMR_LINKFAIL 0x00001000
#define MX_IMR_BUS_ERR 0x00002000
#define MX_IMR_RX_EARLY 0x00004000
#define MX_IMR_ABNORMAL 0x00008000
#define MX_IMR_NORMAL 0x00010000
#define MX_IMR_100MBPSLINK 0x08000000
#define MX_IMR_MAGICKPACK 0x10000000
#define MX_INTRS \
(MX_IMR_RX_OK|MX_IMR_TX_OK|MX_IMR_RX_NOBUF|MX_IMR_RX_WATDOGTIMEO|\
MX_IMR_TX_NOBUF|MX_IMR_TX_UNDERRUN|MX_IMR_BUS_ERR| \
MX_IMR_ABNORMAL|MX_IMR_NORMAL/*|MX_IMR_TX_EARLY*/)
/*
* Serial I/O (EEPROM/ROM) bits.
*/
#define MX_SIO_EE_CS 0x00000001 /* EEPROM chip select */
#define MX_SIO_EE_CLK 0x00000002 /* EEPROM clock */
#define MX_SIO_EE_DATAIN 0x00000004 /* EEPROM data output */
#define MX_SIO_EE_DATAOUT 0x00000008 /* EEPROM data input */
#define MX_SIO_ROMDATA4 0x00000010
#define MX_SIO_ROMDATA5 0x00000020
#define MX_SIO_ROMDATA6 0x00000040
#define MX_SIO_ROMDATA7 0x00000080
#define MX_SIO_EESEL 0x00000800
#define MX_SIO_ROMSEL 0x00001000
#define MX_SIO_ROMCTL_WRITE 0x00002000
#define MX_SIO_ROMCTL_READ 0x00004000
#define MX_SIO_MII_CLK 0x00010000 /* MDIO clock */
#define MX_SIO_MII_DATAOUT 0x00020000 /* MDIO data out */
#define MX_SIO_MII_DIR 0x00040000 /* MDIO dir */
#define MX_SIO_MII_DATAIN 0x00080000 /* MDIO data in */
#define MX_EECMD_WRITE 0x140
#define MX_EECMD_READ 0x180
#define MX_EECMD_ERASE 0x1c0
#define MX_EE_NODEADDR_OFFSET 0x70
#define MX_EE_NODEADDR 10
/*
* General purpose timer register
*/
#define MX_TIMER_VALUE 0x0000FFFF
#define MX_TIMER_CONTINUUS 0x00010000
/*
* 10baseT status register
*/
#define MX_TSTAT_LS100 0x00000002 /* link status of 100baseTX */
#define MX_TSTAT_LS10 0x00000004 /* link status of 10baseT */
#define MX_TSTAT_AUTOPOLARITY 0x00000008
#define MX_TSTAT_REMFAULT 0x00000800
#define MX_TSTAT_ANEGSTAT 0x00007000
#define MX_TSTAT_LP_CAN_NWAY 0x00008000 /* link partner supports NWAY */
#define MX_TSTAT_LPCODEWORD 0xFFFF0000 /* link partner's code word */
#define MX_ASTAT_DISABLE 0x00000000
#define MX_ASTAT_TXDISABLE 0x00001000
#define MX_ASTAT_ABDETECT 0x00002000
#define MX_ASTAT_ACKDETECT 0x00003000
#define MX_ASTAT_CMPACKDETECT 0x00004000
#define MX_ASTAT_AUTONEGCMP 0x00005000
#define MX_ASTAT_LINKCHECK 0x00006000
/*
* PHY reset register
*/
#define MX_SIA_RESET_NWAY 0x00000001
#define MX_SIA_RESET_100TX 0x00000002
/*
* 10baseT control register
*/
#define MX_TCTL_LOOPBACK 0x00000002
#define MX_TCTL_POWERDOWN 0x00000004
#define MX_TCTL_HALFDUPLEX 0x00000040
#define MX_TCTL_AUTONEGENBL 0x00000080
#define MX_TCTL_RX_SQUELCH 0x00000100
#define MX_TCTL_LINKTEST 0x00001000
#define MX_TCTL_100BTXHALF 0x00010000
#define MX_TCTL_100BTXFULL 0x00020000
#define MX_TCTL_100BT4 0x00040000
/*
* Watchdog timer register
*/
#define MX_WDOG_JABBERDIS 0x00000001
#define MX_WDOG_HOSTUNJAB 0x00000002
#define MX_WDOG_JABBERCLK 0x00000004
#define MX_WDOG_RXWDOGDIS 0x00000010
#define MX_WDOG_RXWDOGCLK 0x00000020
#define MX_WDOG_MUSTBEZERO 0x00000100
/*
* Magic packet register
*/
#define MX_MPACK_DISABLE 0x00400000
/*
* NWAY status register.
*/
#define MX_NWAY_10BTHALF 0x08000000
#define MX_NWAY_10BTFULL 0x10000000
#define MX_NWAY_100BTHALF 0x20000000
#define MX_NWAY_100BTFULL 0x40000000
#define MX_NWAY_100BT4 0x80000000
/*
* Size of a setup frame.
*/
#define MX_SFRAME_LEN 192
/*
* Macronix TX/RX list structure.
*/
struct mx_desc {
u_int32_t mx_status;
u_int32_t mx_ctl;
u_int32_t mx_ptr1;
u_int32_t mx_ptr2;
};
#define mx_data mx_ptr1
#define mx_next mx_ptr2
#define MX_RXSTAT_FIFOOFLOW 0x00000001
#define MX_RXSTAT_CRCERR 0x00000002
#define MX_RXSTAT_DRIBBLE 0x00000004
#define MX_RXSTAT_WATCHDOG 0x00000010
#define MX_RXSTAT_FRAMETYPE 0x00000020 /* 0 == IEEE 802.3 */
#define MX_RXSTAT_COLLSEEN 0x00000040
#define MX_RXSTAT_GIANT 0x00000080
#define MX_RXSTAT_LASTFRAG 0x00000100
#define MX_RXSTAT_FIRSTFRAG 0x00000200
#define MX_RXSTAT_MULTICAST 0x00000400
#define MX_RXSTAT_RUNT 0x00000800
#define MX_RXSTAT_RXTYPE 0x00003000
#define MX_RXSTAT_RXERR 0x00008000
#define MX_RXSTAT_RXLEN 0x3FFF0000
#define MX_RXSTAT_OWN 0x80000000
#define MX_RXBYTES(x) ((x & MX_RXSTAT_RXLEN) >> 16)
#define MX_RXSTAT (MX_RXSTAT_FIRSTFRAG|MX_RXSTAT_LASTFRAG|MX_RXSTAT_OWN)
#define MX_RXCTL_BUFLEN1 0x00000FFF
#define MX_RXCTL_BUFLEN2 0x00FFF000
#define MX_RXCTL_RLINK 0x01000000
#define MX_RXCTL_RLAST 0x02000000
#define MX_TXSTAT_DEFER 0x00000001
#define MX_TXSTAT_UNDERRUN 0x00000002
#define MX_TXSTAT_LINKFAIl 0x00000003
#define MX_TXSTAT_COLLCNT 0x00000078
#define MX_TXSTAT_SQE 0x00000080
#define MX_TXSTAT_EXCESSCOLL 0x00000100
#define MX_TXSTAT_LATECOLL 0x00000200
#define MX_TXSTAT_NOCARRIER 0x00000400
#define MX_TXSTAT_CARRLOST 0x00000800
#define MX_TXSTAT_JABTIMEO 0x00004000
#define MX_TXSTAT_ERRSUM 0x00008000
#define MX_TXSTAT_OWN 0x80000000
#define MX_TXCTL_BUFLEN1 0x000007FF
#define MX_TXCTL_BUFLEN2 0x003FF800
#define MX_TXCTL_FILTTYPE0 0x00400000
#define MX_TXCTL_PAD 0x00800000
#define MX_TXCTL_TLINK 0x01000000
#define MX_TXCTL_TLAST 0x02000000
#define MX_TXCTL_NOCRC 0x04000000
#define MX_TXCTL_SETUP 0x08000000
#define MX_TXCTL_FILTTYPE1 0x10000000
#define MX_TXCTL_FIRSTFRAG 0x20000000
#define MX_TXCTL_LASTFRAG 0x40000000
#define MX_TXCTL_FINT 0x80000000
#define MX_FILTER_PERFECT 0x00000000
#define MX_FILTER_HASHPERF 0x00400000
#define MX_FILTER_INVERSE 0x10000000
#define MX_FILTER_HASHONLY 0x10400000
#define MX_MAXFRAGS 16
#define MX_RX_LIST_CNT 64
#define MX_TX_LIST_CNT 128
#define MX_MIN_FRAMELEN 60
/*
* A tx 'super descriptor' is actually 16 regular descriptors
* back to back.
*/
struct mx_txdesc {
struct mx_desc mx_frag[MX_MAXFRAGS];
};
#define MX_TXNEXT(x) x->mx_ptr->mx_frag[x->mx_lastdesc].mx_next
#define MX_TXSTATUS(x) x->mx_ptr->mx_frag[x->mx_lastdesc].mx_status
#define MX_TXCTL(x) x->mx_ptr->mx_frag[x->mx_lastdesc].mx_ctl
#define MX_TXDATA(x) x->mx_ptr->mx_frag[x->mx_lastdesc].mx_data
#define MX_TXOWN(x) x->mx_ptr->mx_frag[0].mx_status
struct mx_list_data {
struct mx_desc mx_rx_list[MX_RX_LIST_CNT];
struct mx_txdesc mx_tx_list[MX_TX_LIST_CNT];
};
struct mx_chain {
struct mx_txdesc *mx_ptr;
struct mbuf *mx_mbuf;
struct mx_chain *mx_nextdesc;
u_int8_t mx_lastdesc;
};
struct mx_chain_onefrag {
struct mx_desc *mx_ptr;
struct mbuf *mx_mbuf;
struct mx_chain_onefrag *mx_nextdesc;
};
struct mx_chain_data {
struct mx_desc mx_sframe;
u_int32_t mx_sbuf[MX_SFRAME_LEN/sizeof(u_int32_t)];
u_int8_t mx_pad[MX_MIN_FRAMELEN];
struct mx_chain_onefrag mx_rx_chain[MX_RX_LIST_CNT];
struct mx_chain mx_tx_chain[MX_TX_LIST_CNT];
struct mx_chain_onefrag *mx_rx_head;
struct mx_chain *mx_tx_head;
struct mx_chain *mx_tx_tail;
struct mx_chain *mx_tx_free;
};
struct mx_type {
u_int16_t mx_vid;
u_int16_t mx_did;
char *mx_name;
};
struct mx_mii_frame {
u_int8_t mii_stdelim;
u_int8_t mii_opcode;
u_int8_t mii_phyaddr;
u_int8_t mii_regaddr;
u_int8_t mii_turnaround;
u_int16_t mii_data;
};
/*
* MII constants
*/
#define MX_MII_STARTDELIM 0x01
#define MX_MII_READOP 0x02
#define MX_MII_WRITEOP 0x01
#define MX_MII_TURNAROUND 0x02
#define MX_FLAG_FORCEDELAY 1
#define MX_FLAG_SCHEDDELAY 2
#define MX_FLAG_DELAYTIMEO 3
struct mx_softc {
struct arpcom arpcom; /* interface info */
struct ifmedia ifmedia; /* media info */
bus_space_handle_t mx_bhandle; /* bus space handle */
bus_space_tag_t mx_btag; /* bus space tag */
struct mx_type *mx_info; /* Macronix adapter info */
struct mx_type *mx_pinfo; /* phy info */
u_int8_t mx_unit; /* interface number */
u_int8_t mx_type;
u_int8_t mx_phy_addr; /* PHY address */
u_int8_t mx_tx_pend; /* TX pending */
u_int8_t mx_want_auto;
u_int8_t mx_autoneg;
u_int8_t mx_cachesize;
caddr_t mx_ldata_ptr;
struct mx_list_data *mx_ldata;
struct mx_chain_data mx_cdata;
};
/*
* register space access macros
*/
#define CSR_WRITE_4(sc, reg, val) \
bus_space_write_4(sc->mx_btag, sc->mx_bhandle, reg, val)
#define CSR_WRITE_2(sc, reg, val) \
bus_space_write_2(sc->mx_btag, sc->mx_bhandle, reg, val)
#define CSR_WRITE_1(sc, reg, val) \
bus_space_write_1(sc->mx_btag, sc->mx_bhandle, reg, val)
#define CSR_READ_4(sc, reg) \
bus_space_read_4(sc->mx_btag, sc->mx_bhandle, reg)
#define CSR_READ_2(sc, reg) \
bus_space_read_2(sc->mx_btag, sc->mx_bhandle, reg)
#define CSR_READ_1(sc, reg) \
bus_space_read_1(sc->mx_btag, sc->mx_bhandle, reg)
#define MX_TIMEOUT 1000
/*
* General constants that are fun to know.
*
* Macronix PCI vendor ID
*/
#define MX_VENDORID 0x10D9
/*
* Macronix PMAC device IDs.
*/
#define MX_DEVICEID_98713 0x0512
#define MX_DEVICEID_987x5 0x0531
/*
* Compex PCI vendor ID.
*/
#define CP_VENDORID 0x11F6
/*
* Compex PMAC PCI device IDs.
*/
#define CP_DEVICEID_98713 0x9881
/*
* Lite-On PNIC PCI vendor ID
*/
#define PN_VENDORID 0x11AD
/*
* Lite-On PNIC II device ID. Note: this is actually a Macronix 98715A
* with wake on lan/magic packet support.
*/
#define PN_DEVICEID_PNIC_II 0xc115
/*
* Texas Instruments PHY identifiers
*/
#define TI_PHY_VENDORID 0x4000
#define TI_PHY_10BT 0x501F
#define TI_PHY_100VGPMI 0x502F
/*
* These ID values are for the NS DP83840A 10/100 PHY
*/
#define NS_PHY_VENDORID 0x2000
#define NS_PHY_83840A 0x5C0F
/*
* Level 1 10/100 PHY
*/
#define LEVEL1_PHY_VENDORID 0x7810
#define LEVEL1_PHY_LXT970 0x000F
/*
* Intel 82555 10/100 PHY
*/
#define INTEL_PHY_VENDORID 0x0A28
#define INTEL_PHY_82555 0x015F
/*
* SEEQ 80220 10/100 PHY
*/
#define SEEQ_PHY_VENDORID 0x0016
#define SEEQ_PHY_80220 0xF83F
/*
* PCI low memory base and low I/O base register, and
* other PCI registers.
*/
#define MX_PCI_VENDOR_ID 0x00
#define MX_PCI_DEVICE_ID 0x02
#define MX_PCI_COMMAND 0x04
#define MX_PCI_STATUS 0x06
#define MX_PCI_REVID 0x08
#define MX_PCI_CLASSCODE 0x09
#define MX_PCI_CACHELEN 0x0C
#define MX_PCI_LATENCY_TIMER 0x0D
#define MX_PCI_HEADER_TYPE 0x0E
#define MX_PCI_LOIO 0x10
#define MX_PCI_LOMEM 0x14
#define MX_PCI_BIOSROM 0x30
#define MX_PCI_INTLINE 0x3C
#define MX_PCI_INTPIN 0x3D
#define MX_PCI_MINGNT 0x3E
#define MX_PCI_MINLAT 0x0F
#define MX_PCI_RESETOPT 0x48
#define MX_PCI_EEPROM_DATA 0x4C
/* power management registers */
#define MX_PCI_CAPID 0x44 /* 8 bits */
#define MX_PCI_NEXTPTR 0x45 /* 8 bits */
#define MX_PCI_PWRMGMTCAP 0x46 /* 16 bits */
#define MX_PCI_PWRMGMTCTRL 0x48 /* 16 bits */
#define MX_PSTATE_MASK 0x0003
#define MX_PSTATE_D0 0x0000
#define MX_PSTATE_D1 0x0001
#define MX_PSTATE_D2 0x0002
#define MX_PSTATE_D3 0x0003
#define MX_PME_EN 0x0010
#define MX_PME_STATUS 0x8000
#define PHY_UNKNOWN 6
#define MX_PHYADDR_MIN 0x00
#define MX_PHYADDR_MAX 0x1F
#define PHY_BMCR 0x00
#define PHY_BMSR 0x01
#define PHY_VENID 0x02
#define PHY_DEVID 0x03
#define PHY_ANAR 0x04
#define PHY_LPAR 0x05
#define PHY_ANEXP 0x06
#define PHY_ANAR_NEXTPAGE 0x8000
#define PHY_ANAR_RSVD0 0x4000
#define PHY_ANAR_TLRFLT 0x2000
#define PHY_ANAR_RSVD1 0x1000
#define PHY_ANAR_RSVD2 0x0800
#define PHY_ANAR_RSVD3 0x0400
#define PHY_ANAR_100BT4 0x0200
#define PHY_ANAR_100BTXFULL 0x0100
#define PHY_ANAR_100BTXHALF 0x0080
#define PHY_ANAR_10BTFULL 0x0040
#define PHY_ANAR_10BTHALF 0x0020
#define PHY_ANAR_PROTO4 0x0010
#define PHY_ANAR_PROTO3 0x0008
#define PHY_ANAR_PROTO2 0x0004
#define PHY_ANAR_PROTO1 0x0002
#define PHY_ANAR_PROTO0 0x0001
/*
* These are the register definitions for the PHY (physical layer
* interface chip).
*/
/*
* PHY BMCR Basic Mode Control Register
*/
#define PHY_BMCR_RESET 0x8000
#define PHY_BMCR_LOOPBK 0x4000
#define PHY_BMCR_SPEEDSEL 0x2000
#define PHY_BMCR_AUTONEGENBL 0x1000
#define PHY_BMCR_RSVD0 0x0800 /* write as zero */
#define PHY_BMCR_ISOLATE 0x0400
#define PHY_BMCR_AUTONEGRSTR 0x0200
#define PHY_BMCR_DUPLEX 0x0100
#define PHY_BMCR_COLLTEST 0x0080
#define PHY_BMCR_RSVD1 0x0040 /* write as zero, don't care */
#define PHY_BMCR_RSVD2 0x0020 /* write as zero, don't care */
#define PHY_BMCR_RSVD3 0x0010 /* write as zero, don't care */
#define PHY_BMCR_RSVD4 0x0008 /* write as zero, don't care */
#define PHY_BMCR_RSVD5 0x0004 /* write as zero, don't care */
#define PHY_BMCR_RSVD6 0x0002 /* write as zero, don't care */
#define PHY_BMCR_RSVD7 0x0001 /* write as zero, don't care */
/*
* RESET: 1 == software reset, 0 == normal operation
* Resets status and control registers to default values.
* Relatches all hardware config values.
*
* LOOPBK: 1 == loopback operation enabled, 0 == normal operation
*
* SPEEDSEL: 1 == 100Mb/s, 0 == 10Mb/s
* Link speed is selected byt his bit or if auto-negotiation if bit
* 12 (AUTONEGENBL) is set (in which case the value of this register
* is ignored).
*
* AUTONEGENBL: 1 == Autonegotiation enabled, 0 == Autonegotiation disabled
* Bits 8 and 13 are ignored when autoneg is set, otherwise bits 8 and 13
* determine speed and mode. Should be cleared and then set if PHY configured
* for no autoneg on startup.
*
* ISOLATE: 1 == isolate PHY from MII, 0 == normal operation
*
* AUTONEGRSTR: 1 == restart autonegotiation, 0 = normal operation
*
* DUPLEX: 1 == full duplex mode, 0 == half duplex mode
*
* COLLTEST: 1 == collision test enabled, 0 == normal operation
*/
/*
* PHY, BMSR Basic Mode Status Register
*/
#define PHY_BMSR_100BT4 0x8000
#define PHY_BMSR_100BTXFULL 0x4000
#define PHY_BMSR_100BTXHALF 0x2000
#define PHY_BMSR_10BTFULL 0x1000
#define PHY_BMSR_10BTHALF 0x0800
#define PHY_BMSR_RSVD1 0x0400 /* write as zero, don't care */
#define PHY_BMSR_RSVD2 0x0200 /* write as zero, don't care */
#define PHY_BMSR_RSVD3 0x0100 /* write as zero, don't care */
#define PHY_BMSR_RSVD4 0x0080 /* write as zero, don't care */
#define PHY_BMSR_MFPRESUP 0x0040
#define PHY_BMSR_AUTONEGCOMP 0x0020
#define PHY_BMSR_REMFAULT 0x0010
#define PHY_BMSR_CANAUTONEG 0x0008
#define PHY_BMSR_LINKSTAT 0x0004
#define PHY_BMSR_JABBER 0x0002
#define PHY_BMSR_EXTENDED 0x0001
#ifdef __alpha__
#undef vtophys
#define vtophys(va) alpha_XXX_dmamap((vm_offset_t)va)
#endif