9a77a6435f
Split out delay parsing into a separate function; we'll support both {tx,rx}-delay as well as the new versions. While here, validate that they're within the expected range and fail to attach if they are not. Assuming that we can clamp the delay is a bad idea that might result in a non-working awg anyways, so we'll fail early to make it easier to catch. This version also unsets the tx and rx delay registers unconditionally and then sets them if we read a non-zero delay. These delay properties should default to 0 if not specified, as declared in the binding documentation. Presumably the delays will be set via hardware configuration if they're not explicitly set in FDT.
1964 lines
46 KiB
C
1964 lines
46 KiB
C
/*-
|
|
* Copyright (c) 2016 Jared McNeill <jmcneill@invisible.ca>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* Allwinner Gigabit Ethernet MAC (EMAC) controller
|
|
*/
|
|
|
|
#include "opt_device_polling.h"
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/rman.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/module.h>
|
|
#include <sys/taskqueue.h>
|
|
#include <sys/gpio.h>
|
|
|
|
#include <net/bpf.h>
|
|
#include <net/if.h>
|
|
#include <net/ethernet.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
#include <net/if_types.h>
|
|
#include <net/if_var.h>
|
|
|
|
#include <machine/bus.h>
|
|
|
|
#include <dev/ofw/ofw_bus.h>
|
|
#include <dev/ofw/ofw_bus_subr.h>
|
|
|
|
#include <arm/allwinner/if_awgreg.h>
|
|
#include <arm/allwinner/aw_sid.h>
|
|
#include <dev/mii/mii.h>
|
|
#include <dev/mii/miivar.h>
|
|
|
|
#include <dev/extres/clk/clk.h>
|
|
#include <dev/extres/hwreset/hwreset.h>
|
|
#include <dev/extres/regulator/regulator.h>
|
|
#include <dev/extres/syscon/syscon.h>
|
|
|
|
#include "syscon_if.h"
|
|
#include "miibus_if.h"
|
|
#include "gpio_if.h"
|
|
|
|
#define RD4(sc, reg) bus_read_4((sc)->res[_RES_EMAC], (reg))
|
|
#define WR4(sc, reg, val) bus_write_4((sc)->res[_RES_EMAC], (reg), (val))
|
|
|
|
#define AWG_LOCK(sc) mtx_lock(&(sc)->mtx)
|
|
#define AWG_UNLOCK(sc) mtx_unlock(&(sc)->mtx);
|
|
#define AWG_ASSERT_LOCKED(sc) mtx_assert(&(sc)->mtx, MA_OWNED)
|
|
#define AWG_ASSERT_UNLOCKED(sc) mtx_assert(&(sc)->mtx, MA_NOTOWNED)
|
|
|
|
#define DESC_ALIGN 4
|
|
#define TX_DESC_COUNT 1024
|
|
#define TX_DESC_SIZE (sizeof(struct emac_desc) * TX_DESC_COUNT)
|
|
#define RX_DESC_COUNT 256
|
|
#define RX_DESC_SIZE (sizeof(struct emac_desc) * RX_DESC_COUNT)
|
|
|
|
#define DESC_OFF(n) ((n) * sizeof(struct emac_desc))
|
|
#define TX_NEXT(n) (((n) + 1) & (TX_DESC_COUNT - 1))
|
|
#define TX_SKIP(n, o) (((n) + (o)) & (TX_DESC_COUNT - 1))
|
|
#define RX_NEXT(n) (((n) + 1) & (RX_DESC_COUNT - 1))
|
|
|
|
#define TX_MAX_SEGS 20
|
|
|
|
#define SOFT_RST_RETRY 1000
|
|
#define MII_BUSY_RETRY 1000
|
|
#define MDIO_FREQ 2500000
|
|
|
|
#define BURST_LEN_DEFAULT 8
|
|
#define RX_TX_PRI_DEFAULT 0
|
|
#define PAUSE_TIME_DEFAULT 0x400
|
|
#define TX_INTERVAL_DEFAULT 64
|
|
#define RX_BATCH_DEFAULT 64
|
|
|
|
/* syscon EMAC clock register */
|
|
#define EMAC_CLK_REG 0x30
|
|
#define EMAC_CLK_EPHY_ADDR (0x1f << 20) /* H3 */
|
|
#define EMAC_CLK_EPHY_ADDR_SHIFT 20
|
|
#define EMAC_CLK_EPHY_LED_POL (1 << 17) /* H3 */
|
|
#define EMAC_CLK_EPHY_SHUTDOWN (1 << 16) /* H3 */
|
|
#define EMAC_CLK_EPHY_SELECT (1 << 15) /* H3 */
|
|
#define EMAC_CLK_RMII_EN (1 << 13)
|
|
#define EMAC_CLK_ETXDC (0x7 << 10)
|
|
#define EMAC_CLK_ETXDC_SHIFT 10
|
|
#define EMAC_CLK_ERXDC (0x1f << 5)
|
|
#define EMAC_CLK_ERXDC_SHIFT 5
|
|
#define EMAC_CLK_PIT (0x1 << 2)
|
|
#define EMAC_CLK_PIT_MII (0 << 2)
|
|
#define EMAC_CLK_PIT_RGMII (1 << 2)
|
|
#define EMAC_CLK_SRC (0x3 << 0)
|
|
#define EMAC_CLK_SRC_MII (0 << 0)
|
|
#define EMAC_CLK_SRC_EXT_RGMII (1 << 0)
|
|
#define EMAC_CLK_SRC_RGMII (2 << 0)
|
|
|
|
/* Burst length of RX and TX DMA transfers */
|
|
static int awg_burst_len = BURST_LEN_DEFAULT;
|
|
TUNABLE_INT("hw.awg.burst_len", &awg_burst_len);
|
|
|
|
/* RX / TX DMA priority. If 1, RX DMA has priority over TX DMA. */
|
|
static int awg_rx_tx_pri = RX_TX_PRI_DEFAULT;
|
|
TUNABLE_INT("hw.awg.rx_tx_pri", &awg_rx_tx_pri);
|
|
|
|
/* Pause time field in the transmitted control frame */
|
|
static int awg_pause_time = PAUSE_TIME_DEFAULT;
|
|
TUNABLE_INT("hw.awg.pause_time", &awg_pause_time);
|
|
|
|
/* Request a TX interrupt every <n> descriptors */
|
|
static int awg_tx_interval = TX_INTERVAL_DEFAULT;
|
|
TUNABLE_INT("hw.awg.tx_interval", &awg_tx_interval);
|
|
|
|
/* Maximum number of mbufs to send to if_input */
|
|
static int awg_rx_batch = RX_BATCH_DEFAULT;
|
|
TUNABLE_INT("hw.awg.rx_batch", &awg_rx_batch);
|
|
|
|
enum awg_type {
|
|
EMAC_A83T = 1,
|
|
EMAC_H3,
|
|
EMAC_A64,
|
|
};
|
|
|
|
static struct ofw_compat_data compat_data[] = {
|
|
{ "allwinner,sun8i-a83t-emac", EMAC_A83T },
|
|
{ "allwinner,sun8i-h3-emac", EMAC_H3 },
|
|
{ "allwinner,sun50i-a64-emac", EMAC_A64 },
|
|
{ NULL, 0 }
|
|
};
|
|
|
|
struct awg_bufmap {
|
|
bus_dmamap_t map;
|
|
struct mbuf *mbuf;
|
|
};
|
|
|
|
struct awg_txring {
|
|
bus_dma_tag_t desc_tag;
|
|
bus_dmamap_t desc_map;
|
|
struct emac_desc *desc_ring;
|
|
bus_addr_t desc_ring_paddr;
|
|
bus_dma_tag_t buf_tag;
|
|
struct awg_bufmap buf_map[TX_DESC_COUNT];
|
|
u_int cur, next, queued;
|
|
u_int segs;
|
|
};
|
|
|
|
struct awg_rxring {
|
|
bus_dma_tag_t desc_tag;
|
|
bus_dmamap_t desc_map;
|
|
struct emac_desc *desc_ring;
|
|
bus_addr_t desc_ring_paddr;
|
|
bus_dma_tag_t buf_tag;
|
|
struct awg_bufmap buf_map[RX_DESC_COUNT];
|
|
bus_dmamap_t buf_spare_map;
|
|
u_int cur;
|
|
};
|
|
|
|
enum {
|
|
_RES_EMAC,
|
|
_RES_IRQ,
|
|
_RES_SYSCON,
|
|
_RES_NITEMS
|
|
};
|
|
|
|
struct awg_softc {
|
|
struct resource *res[_RES_NITEMS];
|
|
struct mtx mtx;
|
|
if_t ifp;
|
|
device_t dev;
|
|
device_t miibus;
|
|
struct callout stat_ch;
|
|
struct task link_task;
|
|
void *ih;
|
|
u_int mdc_div_ratio_m;
|
|
int link;
|
|
int if_flags;
|
|
enum awg_type type;
|
|
struct syscon *syscon;
|
|
|
|
struct awg_txring tx;
|
|
struct awg_rxring rx;
|
|
};
|
|
|
|
static struct resource_spec awg_spec[] = {
|
|
{ SYS_RES_MEMORY, 0, RF_ACTIVE },
|
|
{ SYS_RES_IRQ, 0, RF_ACTIVE },
|
|
{ SYS_RES_MEMORY, 1, RF_ACTIVE | RF_OPTIONAL },
|
|
{ -1, 0 }
|
|
};
|
|
|
|
static void awg_txeof(struct awg_softc *sc);
|
|
|
|
static int awg_parse_delay(device_t dev, uint32_t *tx_delay,
|
|
uint32_t *rx_delay);
|
|
static uint32_t syscon_read_emac_clk_reg(device_t dev);
|
|
static void syscon_write_emac_clk_reg(device_t dev, uint32_t val);
|
|
static phandle_t awg_get_phy_node(device_t dev);
|
|
static bool awg_has_internal_phy(device_t dev);
|
|
|
|
static int
|
|
awg_miibus_readreg(device_t dev, int phy, int reg)
|
|
{
|
|
struct awg_softc *sc;
|
|
int retry, val;
|
|
|
|
sc = device_get_softc(dev);
|
|
val = 0;
|
|
|
|
WR4(sc, EMAC_MII_CMD,
|
|
(sc->mdc_div_ratio_m << MDC_DIV_RATIO_M_SHIFT) |
|
|
(phy << PHY_ADDR_SHIFT) |
|
|
(reg << PHY_REG_ADDR_SHIFT) |
|
|
MII_BUSY);
|
|
for (retry = MII_BUSY_RETRY; retry > 0; retry--) {
|
|
if ((RD4(sc, EMAC_MII_CMD) & MII_BUSY) == 0) {
|
|
val = RD4(sc, EMAC_MII_DATA);
|
|
break;
|
|
}
|
|
DELAY(10);
|
|
}
|
|
|
|
if (retry == 0)
|
|
device_printf(dev, "phy read timeout, phy=%d reg=%d\n",
|
|
phy, reg);
|
|
|
|
return (val);
|
|
}
|
|
|
|
static int
|
|
awg_miibus_writereg(device_t dev, int phy, int reg, int val)
|
|
{
|
|
struct awg_softc *sc;
|
|
int retry;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
WR4(sc, EMAC_MII_DATA, val);
|
|
WR4(sc, EMAC_MII_CMD,
|
|
(sc->mdc_div_ratio_m << MDC_DIV_RATIO_M_SHIFT) |
|
|
(phy << PHY_ADDR_SHIFT) |
|
|
(reg << PHY_REG_ADDR_SHIFT) |
|
|
MII_WR | MII_BUSY);
|
|
for (retry = MII_BUSY_RETRY; retry > 0; retry--) {
|
|
if ((RD4(sc, EMAC_MII_CMD) & MII_BUSY) == 0)
|
|
break;
|
|
DELAY(10);
|
|
}
|
|
|
|
if (retry == 0)
|
|
device_printf(dev, "phy write timeout, phy=%d reg=%d\n",
|
|
phy, reg);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
awg_update_link_locked(struct awg_softc *sc)
|
|
{
|
|
struct mii_data *mii;
|
|
uint32_t val;
|
|
|
|
AWG_ASSERT_LOCKED(sc);
|
|
|
|
if ((if_getdrvflags(sc->ifp) & IFF_DRV_RUNNING) == 0)
|
|
return;
|
|
mii = device_get_softc(sc->miibus);
|
|
|
|
if ((mii->mii_media_status & (IFM_ACTIVE | IFM_AVALID)) ==
|
|
(IFM_ACTIVE | IFM_AVALID)) {
|
|
switch (IFM_SUBTYPE(mii->mii_media_active)) {
|
|
case IFM_1000_T:
|
|
case IFM_1000_SX:
|
|
case IFM_100_TX:
|
|
case IFM_10_T:
|
|
sc->link = 1;
|
|
break;
|
|
default:
|
|
sc->link = 0;
|
|
break;
|
|
}
|
|
} else
|
|
sc->link = 0;
|
|
|
|
if (sc->link == 0)
|
|
return;
|
|
|
|
val = RD4(sc, EMAC_BASIC_CTL_0);
|
|
val &= ~(BASIC_CTL_SPEED | BASIC_CTL_DUPLEX);
|
|
|
|
if (IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T ||
|
|
IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_SX)
|
|
val |= BASIC_CTL_SPEED_1000 << BASIC_CTL_SPEED_SHIFT;
|
|
else if (IFM_SUBTYPE(mii->mii_media_active) == IFM_100_TX)
|
|
val |= BASIC_CTL_SPEED_100 << BASIC_CTL_SPEED_SHIFT;
|
|
else
|
|
val |= BASIC_CTL_SPEED_10 << BASIC_CTL_SPEED_SHIFT;
|
|
|
|
if ((IFM_OPTIONS(mii->mii_media_active) & IFM_FDX) != 0)
|
|
val |= BASIC_CTL_DUPLEX;
|
|
|
|
WR4(sc, EMAC_BASIC_CTL_0, val);
|
|
|
|
val = RD4(sc, EMAC_RX_CTL_0);
|
|
val &= ~RX_FLOW_CTL_EN;
|
|
if ((IFM_OPTIONS(mii->mii_media_active) & IFM_ETH_RXPAUSE) != 0)
|
|
val |= RX_FLOW_CTL_EN;
|
|
WR4(sc, EMAC_RX_CTL_0, val);
|
|
|
|
val = RD4(sc, EMAC_TX_FLOW_CTL);
|
|
val &= ~(PAUSE_TIME|TX_FLOW_CTL_EN);
|
|
if ((IFM_OPTIONS(mii->mii_media_active) & IFM_ETH_TXPAUSE) != 0)
|
|
val |= TX_FLOW_CTL_EN;
|
|
if ((IFM_OPTIONS(mii->mii_media_active) & IFM_FDX) != 0)
|
|
val |= awg_pause_time << PAUSE_TIME_SHIFT;
|
|
WR4(sc, EMAC_TX_FLOW_CTL, val);
|
|
}
|
|
|
|
static void
|
|
awg_link_task(void *arg, int pending)
|
|
{
|
|
struct awg_softc *sc;
|
|
|
|
sc = arg;
|
|
|
|
AWG_LOCK(sc);
|
|
awg_update_link_locked(sc);
|
|
AWG_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
awg_miibus_statchg(device_t dev)
|
|
{
|
|
struct awg_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
taskqueue_enqueue(taskqueue_swi, &sc->link_task);
|
|
}
|
|
|
|
static void
|
|
awg_media_status(if_t ifp, struct ifmediareq *ifmr)
|
|
{
|
|
struct awg_softc *sc;
|
|
struct mii_data *mii;
|
|
|
|
sc = if_getsoftc(ifp);
|
|
mii = device_get_softc(sc->miibus);
|
|
|
|
AWG_LOCK(sc);
|
|
mii_pollstat(mii);
|
|
ifmr->ifm_active = mii->mii_media_active;
|
|
ifmr->ifm_status = mii->mii_media_status;
|
|
AWG_UNLOCK(sc);
|
|
}
|
|
|
|
static int
|
|
awg_media_change(if_t ifp)
|
|
{
|
|
struct awg_softc *sc;
|
|
struct mii_data *mii;
|
|
int error;
|
|
|
|
sc = if_getsoftc(ifp);
|
|
mii = device_get_softc(sc->miibus);
|
|
|
|
AWG_LOCK(sc);
|
|
error = mii_mediachg(mii);
|
|
AWG_UNLOCK(sc);
|
|
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
awg_encap(struct awg_softc *sc, struct mbuf **mp)
|
|
{
|
|
bus_dmamap_t map;
|
|
bus_dma_segment_t segs[TX_MAX_SEGS];
|
|
int error, nsegs, cur, first, last, i;
|
|
u_int csum_flags;
|
|
uint32_t flags, status;
|
|
struct mbuf *m;
|
|
|
|
cur = first = sc->tx.cur;
|
|
map = sc->tx.buf_map[first].map;
|
|
|
|
m = *mp;
|
|
error = bus_dmamap_load_mbuf_sg(sc->tx.buf_tag, map, m, segs,
|
|
&nsegs, BUS_DMA_NOWAIT);
|
|
if (error == EFBIG) {
|
|
m = m_collapse(m, M_NOWAIT, TX_MAX_SEGS);
|
|
if (m == NULL) {
|
|
device_printf(sc->dev, "awg_encap: m_collapse failed\n");
|
|
m_freem(*mp);
|
|
*mp = NULL;
|
|
return (ENOMEM);
|
|
}
|
|
*mp = m;
|
|
error = bus_dmamap_load_mbuf_sg(sc->tx.buf_tag, map, m,
|
|
segs, &nsegs, BUS_DMA_NOWAIT);
|
|
if (error != 0) {
|
|
m_freem(*mp);
|
|
*mp = NULL;
|
|
}
|
|
}
|
|
if (error != 0) {
|
|
device_printf(sc->dev, "awg_encap: bus_dmamap_load_mbuf_sg failed\n");
|
|
return (error);
|
|
}
|
|
if (nsegs == 0) {
|
|
m_freem(*mp);
|
|
*mp = NULL;
|
|
return (EIO);
|
|
}
|
|
|
|
if (sc->tx.queued + nsegs > TX_DESC_COUNT) {
|
|
bus_dmamap_unload(sc->tx.buf_tag, map);
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
bus_dmamap_sync(sc->tx.buf_tag, map, BUS_DMASYNC_PREWRITE);
|
|
|
|
flags = TX_FIR_DESC;
|
|
status = 0;
|
|
if ((m->m_pkthdr.csum_flags & CSUM_IP) != 0) {
|
|
if ((m->m_pkthdr.csum_flags & (CSUM_TCP|CSUM_UDP)) != 0)
|
|
csum_flags = TX_CHECKSUM_CTL_FULL;
|
|
else
|
|
csum_flags = TX_CHECKSUM_CTL_IP;
|
|
flags |= (csum_flags << TX_CHECKSUM_CTL_SHIFT);
|
|
}
|
|
|
|
for (i = 0; i < nsegs; i++) {
|
|
sc->tx.segs++;
|
|
if (i == nsegs - 1) {
|
|
flags |= TX_LAST_DESC;
|
|
/*
|
|
* Can only request TX completion
|
|
* interrupt on last descriptor.
|
|
*/
|
|
if (sc->tx.segs >= awg_tx_interval) {
|
|
sc->tx.segs = 0;
|
|
flags |= TX_INT_CTL;
|
|
}
|
|
}
|
|
|
|
sc->tx.desc_ring[cur].addr = htole32((uint32_t)segs[i].ds_addr);
|
|
sc->tx.desc_ring[cur].size = htole32(flags | segs[i].ds_len);
|
|
sc->tx.desc_ring[cur].status = htole32(status);
|
|
|
|
flags &= ~TX_FIR_DESC;
|
|
/*
|
|
* Setting of the valid bit in the first descriptor is
|
|
* deferred until the whole chain is fully set up.
|
|
*/
|
|
status = TX_DESC_CTL;
|
|
|
|
++sc->tx.queued;
|
|
cur = TX_NEXT(cur);
|
|
}
|
|
|
|
sc->tx.cur = cur;
|
|
|
|
/* Store mapping and mbuf in the last segment */
|
|
last = TX_SKIP(cur, TX_DESC_COUNT - 1);
|
|
sc->tx.buf_map[first].map = sc->tx.buf_map[last].map;
|
|
sc->tx.buf_map[last].map = map;
|
|
sc->tx.buf_map[last].mbuf = m;
|
|
|
|
/*
|
|
* The whole mbuf chain has been DMA mapped,
|
|
* fix the first descriptor.
|
|
*/
|
|
sc->tx.desc_ring[first].status = htole32(TX_DESC_CTL);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
awg_clean_txbuf(struct awg_softc *sc, int index)
|
|
{
|
|
struct awg_bufmap *bmap;
|
|
|
|
--sc->tx.queued;
|
|
|
|
bmap = &sc->tx.buf_map[index];
|
|
if (bmap->mbuf != NULL) {
|
|
bus_dmamap_sync(sc->tx.buf_tag, bmap->map,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(sc->tx.buf_tag, bmap->map);
|
|
m_freem(bmap->mbuf);
|
|
bmap->mbuf = NULL;
|
|
}
|
|
}
|
|
|
|
static void
|
|
awg_setup_rxdesc(struct awg_softc *sc, int index, bus_addr_t paddr)
|
|
{
|
|
uint32_t status, size;
|
|
|
|
status = RX_DESC_CTL;
|
|
size = MCLBYTES - 1;
|
|
|
|
sc->rx.desc_ring[index].addr = htole32((uint32_t)paddr);
|
|
sc->rx.desc_ring[index].size = htole32(size);
|
|
sc->rx.desc_ring[index].status = htole32(status);
|
|
}
|
|
|
|
static void
|
|
awg_reuse_rxdesc(struct awg_softc *sc, int index)
|
|
{
|
|
|
|
sc->rx.desc_ring[index].status = htole32(RX_DESC_CTL);
|
|
}
|
|
|
|
static int
|
|
awg_newbuf_rx(struct awg_softc *sc, int index)
|
|
{
|
|
struct mbuf *m;
|
|
bus_dma_segment_t seg;
|
|
bus_dmamap_t map;
|
|
int nsegs;
|
|
|
|
m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR);
|
|
if (m == NULL)
|
|
return (ENOBUFS);
|
|
|
|
m->m_pkthdr.len = m->m_len = m->m_ext.ext_size;
|
|
m_adj(m, ETHER_ALIGN);
|
|
|
|
if (bus_dmamap_load_mbuf_sg(sc->rx.buf_tag, sc->rx.buf_spare_map,
|
|
m, &seg, &nsegs, BUS_DMA_NOWAIT) != 0) {
|
|
m_freem(m);
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
if (sc->rx.buf_map[index].mbuf != NULL) {
|
|
bus_dmamap_sync(sc->rx.buf_tag, sc->rx.buf_map[index].map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(sc->rx.buf_tag, sc->rx.buf_map[index].map);
|
|
}
|
|
map = sc->rx.buf_map[index].map;
|
|
sc->rx.buf_map[index].map = sc->rx.buf_spare_map;
|
|
sc->rx.buf_spare_map = map;
|
|
bus_dmamap_sync(sc->rx.buf_tag, sc->rx.buf_map[index].map,
|
|
BUS_DMASYNC_PREREAD);
|
|
|
|
sc->rx.buf_map[index].mbuf = m;
|
|
awg_setup_rxdesc(sc, index, seg.ds_addr);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
awg_start_locked(struct awg_softc *sc)
|
|
{
|
|
struct mbuf *m;
|
|
uint32_t val;
|
|
if_t ifp;
|
|
int cnt, err;
|
|
|
|
AWG_ASSERT_LOCKED(sc);
|
|
|
|
if (!sc->link)
|
|
return;
|
|
|
|
ifp = sc->ifp;
|
|
|
|
if ((if_getdrvflags(ifp) & (IFF_DRV_RUNNING|IFF_DRV_OACTIVE)) !=
|
|
IFF_DRV_RUNNING)
|
|
return;
|
|
|
|
for (cnt = 0; ; cnt++) {
|
|
m = if_dequeue(ifp);
|
|
if (m == NULL)
|
|
break;
|
|
|
|
err = awg_encap(sc, &m);
|
|
if (err != 0) {
|
|
if (err == ENOBUFS)
|
|
if_setdrvflagbits(ifp, IFF_DRV_OACTIVE, 0);
|
|
if (m != NULL)
|
|
if_sendq_prepend(ifp, m);
|
|
break;
|
|
}
|
|
if_bpfmtap(ifp, m);
|
|
}
|
|
|
|
if (cnt != 0) {
|
|
bus_dmamap_sync(sc->tx.desc_tag, sc->tx.desc_map,
|
|
BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
|
|
|
|
/* Start and run TX DMA */
|
|
val = RD4(sc, EMAC_TX_CTL_1);
|
|
WR4(sc, EMAC_TX_CTL_1, val | TX_DMA_START);
|
|
}
|
|
}
|
|
|
|
static void
|
|
awg_start(if_t ifp)
|
|
{
|
|
struct awg_softc *sc;
|
|
|
|
sc = if_getsoftc(ifp);
|
|
|
|
AWG_LOCK(sc);
|
|
awg_start_locked(sc);
|
|
AWG_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
awg_tick(void *softc)
|
|
{
|
|
struct awg_softc *sc;
|
|
struct mii_data *mii;
|
|
if_t ifp;
|
|
int link;
|
|
|
|
sc = softc;
|
|
ifp = sc->ifp;
|
|
mii = device_get_softc(sc->miibus);
|
|
|
|
AWG_ASSERT_LOCKED(sc);
|
|
|
|
if ((if_getdrvflags(ifp) & IFF_DRV_RUNNING) == 0)
|
|
return;
|
|
|
|
link = sc->link;
|
|
mii_tick(mii);
|
|
if (sc->link && !link)
|
|
awg_start_locked(sc);
|
|
|
|
callout_reset(&sc->stat_ch, hz, awg_tick, sc);
|
|
}
|
|
|
|
/* Bit Reversal - http://aggregate.org/MAGIC/#Bit%20Reversal */
|
|
static uint32_t
|
|
bitrev32(uint32_t x)
|
|
{
|
|
x = (((x & 0xaaaaaaaa) >> 1) | ((x & 0x55555555) << 1));
|
|
x = (((x & 0xcccccccc) >> 2) | ((x & 0x33333333) << 2));
|
|
x = (((x & 0xf0f0f0f0) >> 4) | ((x & 0x0f0f0f0f) << 4));
|
|
x = (((x & 0xff00ff00) >> 8) | ((x & 0x00ff00ff) << 8));
|
|
|
|
return (x >> 16) | (x << 16);
|
|
}
|
|
|
|
static void
|
|
awg_setup_rxfilter(struct awg_softc *sc)
|
|
{
|
|
uint32_t val, crc, hashreg, hashbit, hash[2], machi, maclo;
|
|
int mc_count, mcnt, i;
|
|
uint8_t *eaddr, *mta;
|
|
if_t ifp;
|
|
|
|
AWG_ASSERT_LOCKED(sc);
|
|
|
|
ifp = sc->ifp;
|
|
val = 0;
|
|
hash[0] = hash[1] = 0;
|
|
|
|
mc_count = if_multiaddr_count(ifp, -1);
|
|
|
|
if (if_getflags(ifp) & IFF_PROMISC)
|
|
val |= DIS_ADDR_FILTER;
|
|
else if (if_getflags(ifp) & IFF_ALLMULTI) {
|
|
val |= RX_ALL_MULTICAST;
|
|
hash[0] = hash[1] = ~0;
|
|
} else if (mc_count > 0) {
|
|
val |= HASH_MULTICAST;
|
|
|
|
mta = malloc(sizeof(unsigned char) * ETHER_ADDR_LEN * mc_count,
|
|
M_DEVBUF, M_NOWAIT);
|
|
if (mta == NULL) {
|
|
if_printf(ifp,
|
|
"failed to allocate temporary multicast list\n");
|
|
return;
|
|
}
|
|
|
|
if_multiaddr_array(ifp, mta, &mcnt, mc_count);
|
|
for (i = 0; i < mcnt; i++) {
|
|
crc = ether_crc32_le(mta + (i * ETHER_ADDR_LEN),
|
|
ETHER_ADDR_LEN) & 0x7f;
|
|
crc = bitrev32(~crc) >> 26;
|
|
hashreg = (crc >> 5);
|
|
hashbit = (crc & 0x1f);
|
|
hash[hashreg] |= (1 << hashbit);
|
|
}
|
|
|
|
free(mta, M_DEVBUF);
|
|
}
|
|
|
|
/* Write our unicast address */
|
|
eaddr = IF_LLADDR(ifp);
|
|
machi = (eaddr[5] << 8) | eaddr[4];
|
|
maclo = (eaddr[3] << 24) | (eaddr[2] << 16) | (eaddr[1] << 8) |
|
|
(eaddr[0] << 0);
|
|
WR4(sc, EMAC_ADDR_HIGH(0), machi);
|
|
WR4(sc, EMAC_ADDR_LOW(0), maclo);
|
|
|
|
/* Multicast hash filters */
|
|
WR4(sc, EMAC_RX_HASH_0, hash[1]);
|
|
WR4(sc, EMAC_RX_HASH_1, hash[0]);
|
|
|
|
/* RX frame filter config */
|
|
WR4(sc, EMAC_RX_FRM_FLT, val);
|
|
}
|
|
|
|
static void
|
|
awg_enable_intr(struct awg_softc *sc)
|
|
{
|
|
/* Enable interrupts */
|
|
WR4(sc, EMAC_INT_EN, RX_INT_EN | TX_INT_EN | TX_BUF_UA_INT_EN);
|
|
}
|
|
|
|
static void
|
|
awg_disable_intr(struct awg_softc *sc)
|
|
{
|
|
/* Disable interrupts */
|
|
WR4(sc, EMAC_INT_EN, 0);
|
|
}
|
|
|
|
static void
|
|
awg_init_locked(struct awg_softc *sc)
|
|
{
|
|
struct mii_data *mii;
|
|
uint32_t val;
|
|
if_t ifp;
|
|
|
|
mii = device_get_softc(sc->miibus);
|
|
ifp = sc->ifp;
|
|
|
|
AWG_ASSERT_LOCKED(sc);
|
|
|
|
if (if_getdrvflags(ifp) & IFF_DRV_RUNNING)
|
|
return;
|
|
|
|
awg_setup_rxfilter(sc);
|
|
|
|
/* Configure DMA burst length and priorities */
|
|
val = awg_burst_len << BASIC_CTL_BURST_LEN_SHIFT;
|
|
if (awg_rx_tx_pri)
|
|
val |= BASIC_CTL_RX_TX_PRI;
|
|
WR4(sc, EMAC_BASIC_CTL_1, val);
|
|
|
|
/* Enable interrupts */
|
|
#ifdef DEVICE_POLLING
|
|
if ((if_getcapenable(ifp) & IFCAP_POLLING) == 0)
|
|
awg_enable_intr(sc);
|
|
else
|
|
awg_disable_intr(sc);
|
|
#else
|
|
awg_enable_intr(sc);
|
|
#endif
|
|
|
|
/* Enable transmit DMA */
|
|
val = RD4(sc, EMAC_TX_CTL_1);
|
|
WR4(sc, EMAC_TX_CTL_1, val | TX_DMA_EN | TX_MD | TX_NEXT_FRAME);
|
|
|
|
/* Enable receive DMA */
|
|
val = RD4(sc, EMAC_RX_CTL_1);
|
|
WR4(sc, EMAC_RX_CTL_1, val | RX_DMA_EN | RX_MD);
|
|
|
|
/* Enable transmitter */
|
|
val = RD4(sc, EMAC_TX_CTL_0);
|
|
WR4(sc, EMAC_TX_CTL_0, val | TX_EN);
|
|
|
|
/* Enable receiver */
|
|
val = RD4(sc, EMAC_RX_CTL_0);
|
|
WR4(sc, EMAC_RX_CTL_0, val | RX_EN | CHECK_CRC);
|
|
|
|
if_setdrvflagbits(ifp, IFF_DRV_RUNNING, IFF_DRV_OACTIVE);
|
|
|
|
mii_mediachg(mii);
|
|
callout_reset(&sc->stat_ch, hz, awg_tick, sc);
|
|
}
|
|
|
|
static void
|
|
awg_init(void *softc)
|
|
{
|
|
struct awg_softc *sc;
|
|
|
|
sc = softc;
|
|
|
|
AWG_LOCK(sc);
|
|
awg_init_locked(sc);
|
|
AWG_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
awg_stop(struct awg_softc *sc)
|
|
{
|
|
if_t ifp;
|
|
uint32_t val;
|
|
int i;
|
|
|
|
AWG_ASSERT_LOCKED(sc);
|
|
|
|
ifp = sc->ifp;
|
|
|
|
callout_stop(&sc->stat_ch);
|
|
|
|
/* Stop transmit DMA and flush data in the TX FIFO */
|
|
val = RD4(sc, EMAC_TX_CTL_1);
|
|
val &= ~TX_DMA_EN;
|
|
val |= FLUSH_TX_FIFO;
|
|
WR4(sc, EMAC_TX_CTL_1, val);
|
|
|
|
/* Disable transmitter */
|
|
val = RD4(sc, EMAC_TX_CTL_0);
|
|
WR4(sc, EMAC_TX_CTL_0, val & ~TX_EN);
|
|
|
|
/* Disable receiver */
|
|
val = RD4(sc, EMAC_RX_CTL_0);
|
|
WR4(sc, EMAC_RX_CTL_0, val & ~RX_EN);
|
|
|
|
/* Disable interrupts */
|
|
awg_disable_intr(sc);
|
|
|
|
/* Disable transmit DMA */
|
|
val = RD4(sc, EMAC_TX_CTL_1);
|
|
WR4(sc, EMAC_TX_CTL_1, val & ~TX_DMA_EN);
|
|
|
|
/* Disable receive DMA */
|
|
val = RD4(sc, EMAC_RX_CTL_1);
|
|
WR4(sc, EMAC_RX_CTL_1, val & ~RX_DMA_EN);
|
|
|
|
sc->link = 0;
|
|
|
|
/* Finish handling transmitted buffers */
|
|
awg_txeof(sc);
|
|
|
|
/* Release any untransmitted buffers. */
|
|
for (i = sc->tx.next; sc->tx.queued > 0; i = TX_NEXT(i)) {
|
|
val = le32toh(sc->tx.desc_ring[i].status);
|
|
if ((val & TX_DESC_CTL) != 0)
|
|
break;
|
|
awg_clean_txbuf(sc, i);
|
|
}
|
|
sc->tx.next = i;
|
|
for (; sc->tx.queued > 0; i = TX_NEXT(i)) {
|
|
sc->tx.desc_ring[i].status = 0;
|
|
awg_clean_txbuf(sc, i);
|
|
}
|
|
sc->tx.cur = sc->tx.next;
|
|
bus_dmamap_sync(sc->tx.desc_tag, sc->tx.desc_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
|
|
/* Setup RX buffers for reuse */
|
|
bus_dmamap_sync(sc->rx.desc_tag, sc->rx.desc_map,
|
|
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
|
|
|
|
for (i = sc->rx.cur; ; i = RX_NEXT(i)) {
|
|
val = le32toh(sc->rx.desc_ring[i].status);
|
|
if ((val & RX_DESC_CTL) != 0)
|
|
break;
|
|
awg_reuse_rxdesc(sc, i);
|
|
}
|
|
sc->rx.cur = i;
|
|
bus_dmamap_sync(sc->rx.desc_tag, sc->rx.desc_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
|
|
if_setdrvflagbits(ifp, 0, IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
|
|
}
|
|
|
|
static int
|
|
awg_rxintr(struct awg_softc *sc)
|
|
{
|
|
if_t ifp;
|
|
struct mbuf *m, *mh, *mt;
|
|
int error, index, len, cnt, npkt;
|
|
uint32_t status;
|
|
|
|
ifp = sc->ifp;
|
|
mh = mt = NULL;
|
|
cnt = 0;
|
|
npkt = 0;
|
|
|
|
bus_dmamap_sync(sc->rx.desc_tag, sc->rx.desc_map,
|
|
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
|
|
|
|
for (index = sc->rx.cur; ; index = RX_NEXT(index)) {
|
|
status = le32toh(sc->rx.desc_ring[index].status);
|
|
if ((status & RX_DESC_CTL) != 0)
|
|
break;
|
|
|
|
len = (status & RX_FRM_LEN) >> RX_FRM_LEN_SHIFT;
|
|
|
|
if (len == 0) {
|
|
if ((status & (RX_NO_ENOUGH_BUF_ERR | RX_OVERFLOW_ERR)) != 0)
|
|
if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
|
|
awg_reuse_rxdesc(sc, index);
|
|
continue;
|
|
}
|
|
|
|
m = sc->rx.buf_map[index].mbuf;
|
|
|
|
error = awg_newbuf_rx(sc, index);
|
|
if (error != 0) {
|
|
if_inc_counter(ifp, IFCOUNTER_IQDROPS, 1);
|
|
awg_reuse_rxdesc(sc, index);
|
|
continue;
|
|
}
|
|
|
|
m->m_pkthdr.rcvif = ifp;
|
|
m->m_pkthdr.len = len;
|
|
m->m_len = len;
|
|
if_inc_counter(ifp, IFCOUNTER_IPACKETS, 1);
|
|
|
|
if ((if_getcapenable(ifp) & IFCAP_RXCSUM) != 0 &&
|
|
(status & RX_FRM_TYPE) != 0) {
|
|
m->m_pkthdr.csum_flags = CSUM_IP_CHECKED;
|
|
if ((status & RX_HEADER_ERR) == 0)
|
|
m->m_pkthdr.csum_flags |= CSUM_IP_VALID;
|
|
if ((status & RX_PAYLOAD_ERR) == 0) {
|
|
m->m_pkthdr.csum_flags |=
|
|
CSUM_DATA_VALID | CSUM_PSEUDO_HDR;
|
|
m->m_pkthdr.csum_data = 0xffff;
|
|
}
|
|
}
|
|
|
|
m->m_nextpkt = NULL;
|
|
if (mh == NULL)
|
|
mh = m;
|
|
else
|
|
mt->m_nextpkt = m;
|
|
mt = m;
|
|
++cnt;
|
|
++npkt;
|
|
|
|
if (cnt == awg_rx_batch) {
|
|
AWG_UNLOCK(sc);
|
|
if_input(ifp, mh);
|
|
AWG_LOCK(sc);
|
|
mh = mt = NULL;
|
|
cnt = 0;
|
|
}
|
|
}
|
|
|
|
if (index != sc->rx.cur) {
|
|
bus_dmamap_sync(sc->rx.desc_tag, sc->rx.desc_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
}
|
|
|
|
if (mh != NULL) {
|
|
AWG_UNLOCK(sc);
|
|
if_input(ifp, mh);
|
|
AWG_LOCK(sc);
|
|
}
|
|
|
|
sc->rx.cur = index;
|
|
|
|
return (npkt);
|
|
}
|
|
|
|
static void
|
|
awg_txeof(struct awg_softc *sc)
|
|
{
|
|
struct emac_desc *desc;
|
|
uint32_t status, size;
|
|
if_t ifp;
|
|
int i, prog;
|
|
|
|
AWG_ASSERT_LOCKED(sc);
|
|
|
|
bus_dmamap_sync(sc->tx.desc_tag, sc->tx.desc_map,
|
|
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
|
|
|
|
ifp = sc->ifp;
|
|
|
|
prog = 0;
|
|
for (i = sc->tx.next; sc->tx.queued > 0; i = TX_NEXT(i)) {
|
|
desc = &sc->tx.desc_ring[i];
|
|
status = le32toh(desc->status);
|
|
if ((status & TX_DESC_CTL) != 0)
|
|
break;
|
|
size = le32toh(desc->size);
|
|
if (size & TX_LAST_DESC) {
|
|
if ((status & (TX_HEADER_ERR | TX_PAYLOAD_ERR)) != 0)
|
|
if_inc_counter(ifp, IFCOUNTER_OERRORS, 1);
|
|
else
|
|
if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1);
|
|
}
|
|
prog++;
|
|
awg_clean_txbuf(sc, i);
|
|
}
|
|
|
|
if (prog > 0) {
|
|
sc->tx.next = i;
|
|
if_setdrvflagbits(ifp, 0, IFF_DRV_OACTIVE);
|
|
}
|
|
}
|
|
|
|
static void
|
|
awg_intr(void *arg)
|
|
{
|
|
struct awg_softc *sc;
|
|
uint32_t val;
|
|
|
|
sc = arg;
|
|
|
|
AWG_LOCK(sc);
|
|
val = RD4(sc, EMAC_INT_STA);
|
|
WR4(sc, EMAC_INT_STA, val);
|
|
|
|
if (val & RX_INT)
|
|
awg_rxintr(sc);
|
|
|
|
if (val & TX_INT)
|
|
awg_txeof(sc);
|
|
|
|
if (val & (TX_INT | TX_BUF_UA_INT)) {
|
|
if (!if_sendq_empty(sc->ifp))
|
|
awg_start_locked(sc);
|
|
}
|
|
|
|
AWG_UNLOCK(sc);
|
|
}
|
|
|
|
#ifdef DEVICE_POLLING
|
|
static int
|
|
awg_poll(if_t ifp, enum poll_cmd cmd, int count)
|
|
{
|
|
struct awg_softc *sc;
|
|
uint32_t val;
|
|
int rx_npkts;
|
|
|
|
sc = if_getsoftc(ifp);
|
|
rx_npkts = 0;
|
|
|
|
AWG_LOCK(sc);
|
|
|
|
if ((if_getdrvflags(ifp) & IFF_DRV_RUNNING) == 0) {
|
|
AWG_UNLOCK(sc);
|
|
return (0);
|
|
}
|
|
|
|
rx_npkts = awg_rxintr(sc);
|
|
awg_txeof(sc);
|
|
if (!if_sendq_empty(ifp))
|
|
awg_start_locked(sc);
|
|
|
|
if (cmd == POLL_AND_CHECK_STATUS) {
|
|
val = RD4(sc, EMAC_INT_STA);
|
|
if (val != 0)
|
|
WR4(sc, EMAC_INT_STA, val);
|
|
}
|
|
|
|
AWG_UNLOCK(sc);
|
|
|
|
return (rx_npkts);
|
|
}
|
|
#endif
|
|
|
|
static int
|
|
awg_ioctl(if_t ifp, u_long cmd, caddr_t data)
|
|
{
|
|
struct awg_softc *sc;
|
|
struct mii_data *mii;
|
|
struct ifreq *ifr;
|
|
int flags, mask, error;
|
|
|
|
sc = if_getsoftc(ifp);
|
|
mii = device_get_softc(sc->miibus);
|
|
ifr = (struct ifreq *)data;
|
|
error = 0;
|
|
|
|
switch (cmd) {
|
|
case SIOCSIFFLAGS:
|
|
AWG_LOCK(sc);
|
|
if (if_getflags(ifp) & IFF_UP) {
|
|
if (if_getdrvflags(ifp) & IFF_DRV_RUNNING) {
|
|
flags = if_getflags(ifp) ^ sc->if_flags;
|
|
if ((flags & (IFF_PROMISC|IFF_ALLMULTI)) != 0)
|
|
awg_setup_rxfilter(sc);
|
|
} else
|
|
awg_init_locked(sc);
|
|
} else {
|
|
if (if_getdrvflags(ifp) & IFF_DRV_RUNNING)
|
|
awg_stop(sc);
|
|
}
|
|
sc->if_flags = if_getflags(ifp);
|
|
AWG_UNLOCK(sc);
|
|
break;
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
if (if_getdrvflags(ifp) & IFF_DRV_RUNNING) {
|
|
AWG_LOCK(sc);
|
|
awg_setup_rxfilter(sc);
|
|
AWG_UNLOCK(sc);
|
|
}
|
|
break;
|
|
case SIOCSIFMEDIA:
|
|
case SIOCGIFMEDIA:
|
|
error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, cmd);
|
|
break;
|
|
case SIOCSIFCAP:
|
|
mask = ifr->ifr_reqcap ^ if_getcapenable(ifp);
|
|
#ifdef DEVICE_POLLING
|
|
if (mask & IFCAP_POLLING) {
|
|
if ((ifr->ifr_reqcap & IFCAP_POLLING) != 0) {
|
|
error = ether_poll_register(awg_poll, ifp);
|
|
if (error != 0)
|
|
break;
|
|
AWG_LOCK(sc);
|
|
awg_disable_intr(sc);
|
|
if_setcapenablebit(ifp, IFCAP_POLLING, 0);
|
|
AWG_UNLOCK(sc);
|
|
} else {
|
|
error = ether_poll_deregister(ifp);
|
|
AWG_LOCK(sc);
|
|
awg_enable_intr(sc);
|
|
if_setcapenablebit(ifp, 0, IFCAP_POLLING);
|
|
AWG_UNLOCK(sc);
|
|
}
|
|
}
|
|
#endif
|
|
if (mask & IFCAP_VLAN_MTU)
|
|
if_togglecapenable(ifp, IFCAP_VLAN_MTU);
|
|
if (mask & IFCAP_RXCSUM)
|
|
if_togglecapenable(ifp, IFCAP_RXCSUM);
|
|
if (mask & IFCAP_TXCSUM)
|
|
if_togglecapenable(ifp, IFCAP_TXCSUM);
|
|
if ((if_getcapenable(ifp) & IFCAP_TXCSUM) != 0)
|
|
if_sethwassistbits(ifp, CSUM_IP | CSUM_UDP | CSUM_TCP, 0);
|
|
else
|
|
if_sethwassistbits(ifp, 0, CSUM_IP | CSUM_UDP | CSUM_TCP);
|
|
break;
|
|
default:
|
|
error = ether_ioctl(ifp, cmd, data);
|
|
break;
|
|
}
|
|
|
|
return (error);
|
|
}
|
|
|
|
static uint32_t
|
|
syscon_read_emac_clk_reg(device_t dev)
|
|
{
|
|
struct awg_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
if (sc->syscon != NULL)
|
|
return (SYSCON_READ_4(sc->syscon, EMAC_CLK_REG));
|
|
else if (sc->res[_RES_SYSCON] != NULL)
|
|
return (bus_read_4(sc->res[_RES_SYSCON], 0));
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
syscon_write_emac_clk_reg(device_t dev, uint32_t val)
|
|
{
|
|
struct awg_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
if (sc->syscon != NULL)
|
|
SYSCON_WRITE_4(sc->syscon, EMAC_CLK_REG, val);
|
|
else if (sc->res[_RES_SYSCON] != NULL)
|
|
bus_write_4(sc->res[_RES_SYSCON], 0, val);
|
|
}
|
|
|
|
static phandle_t
|
|
awg_get_phy_node(device_t dev)
|
|
{
|
|
phandle_t node;
|
|
pcell_t phy_handle;
|
|
|
|
node = ofw_bus_get_node(dev);
|
|
if (OF_getencprop(node, "phy-handle", (void *)&phy_handle,
|
|
sizeof(phy_handle)) <= 0)
|
|
return (0);
|
|
|
|
return (OF_node_from_xref(phy_handle));
|
|
}
|
|
|
|
static bool
|
|
awg_has_internal_phy(device_t dev)
|
|
{
|
|
phandle_t node, phy_node;
|
|
|
|
node = ofw_bus_get_node(dev);
|
|
/* Legacy binding */
|
|
if (OF_hasprop(node, "allwinner,use-internal-phy"))
|
|
return (true);
|
|
|
|
phy_node = awg_get_phy_node(dev);
|
|
return (phy_node != 0 && ofw_bus_node_is_compatible(OF_parent(phy_node),
|
|
"allwinner,sun8i-h3-mdio-internal") != 0);
|
|
}
|
|
|
|
static int
|
|
awg_parse_delay(device_t dev, uint32_t *tx_delay, uint32_t *rx_delay)
|
|
{
|
|
phandle_t node;
|
|
uint32_t delay;
|
|
|
|
if (tx_delay == NULL || rx_delay == NULL)
|
|
return (EINVAL);
|
|
*tx_delay = *rx_delay = 0;
|
|
node = ofw_bus_get_node(dev);
|
|
|
|
if (OF_getencprop(node, "tx-delay", &delay, sizeof(delay)) >= 0)
|
|
*tx_delay = delay;
|
|
else if (OF_getencprop(node, "allwinner,tx-delay-ps", &delay,
|
|
sizeof(delay)) >= 0) {
|
|
if ((delay % 100) != 0) {
|
|
device_printf(dev, "tx-delay-ps is not a multiple of 100\n");
|
|
return (EDOM);
|
|
}
|
|
*tx_delay = delay / 100;
|
|
}
|
|
if (*tx_delay > 7) {
|
|
device_printf(dev, "tx-delay out of range\n");
|
|
return (ERANGE);
|
|
}
|
|
|
|
if (OF_getencprop(node, "rx-delay", &delay, sizeof(delay)) >= 0)
|
|
*rx_delay = delay;
|
|
else if (OF_getencprop(node, "allwinner,rx-delay-ps", &delay,
|
|
sizeof(delay)) >= 0) {
|
|
if ((delay % 100) != 0) {
|
|
device_printf(dev, "rx-delay-ps is not within documented domain\n");
|
|
return (EDOM);
|
|
}
|
|
*rx_delay = delay / 100;
|
|
}
|
|
if (*rx_delay > 31) {
|
|
device_printf(dev, "rx-delay out of range\n");
|
|
return (ERANGE);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
awg_setup_phy(device_t dev)
|
|
{
|
|
struct awg_softc *sc;
|
|
clk_t clk_tx, clk_tx_parent;
|
|
const char *tx_parent_name;
|
|
char *phy_type;
|
|
phandle_t node;
|
|
uint32_t reg, tx_delay, rx_delay;
|
|
int error;
|
|
bool use_syscon;
|
|
|
|
sc = device_get_softc(dev);
|
|
node = ofw_bus_get_node(dev);
|
|
use_syscon = false;
|
|
|
|
if (OF_getprop_alloc(node, "phy-mode", (void **)&phy_type) == 0)
|
|
return (0);
|
|
|
|
if (sc->syscon != NULL || sc->res[_RES_SYSCON] != NULL)
|
|
use_syscon = true;
|
|
|
|
if (bootverbose)
|
|
device_printf(dev, "PHY type: %s, conf mode: %s\n", phy_type,
|
|
use_syscon ? "reg" : "clk");
|
|
|
|
if (use_syscon) {
|
|
/*
|
|
* Abstract away writing to syscon for devices like the pine64.
|
|
* For the pine64, we get dtb from U-Boot and it still uses the
|
|
* legacy setup of specifying syscon register in emac node
|
|
* rather than as its own node and using an xref in emac.
|
|
* These abstractions can go away once U-Boot dts is up-to-date.
|
|
*/
|
|
reg = syscon_read_emac_clk_reg(dev);
|
|
reg &= ~(EMAC_CLK_PIT | EMAC_CLK_SRC | EMAC_CLK_RMII_EN);
|
|
if (strncmp(phy_type, "rgmii", 5) == 0)
|
|
reg |= EMAC_CLK_PIT_RGMII | EMAC_CLK_SRC_RGMII;
|
|
else if (strcmp(phy_type, "rmii") == 0)
|
|
reg |= EMAC_CLK_RMII_EN;
|
|
else
|
|
reg |= EMAC_CLK_PIT_MII | EMAC_CLK_SRC_MII;
|
|
|
|
/*
|
|
* Fail attach if we fail to parse either of the delay
|
|
* parameters. If we don't have the proper delay to write to
|
|
* syscon, then awg likely won't function properly anyways.
|
|
* Lack of delay is not an error!
|
|
*/
|
|
error = awg_parse_delay(dev, &tx_delay, &rx_delay);
|
|
if (error != 0)
|
|
goto fail;
|
|
|
|
/* Default to 0 and we'll increase it if we need to. */
|
|
reg &= ~(EMAC_CLK_ETXDC | EMAC_CLK_ERXDC);
|
|
if (tx_delay > 0)
|
|
reg |= (tx_delay << EMAC_CLK_ETXDC_SHIFT);
|
|
if (rx_delay > 0)
|
|
reg |= (rx_delay << EMAC_CLK_ERXDC_SHIFT);
|
|
|
|
if (sc->type == EMAC_H3) {
|
|
if (awg_has_internal_phy(dev)) {
|
|
reg |= EMAC_CLK_EPHY_SELECT;
|
|
reg &= ~EMAC_CLK_EPHY_SHUTDOWN;
|
|
if (OF_hasprop(node,
|
|
"allwinner,leds-active-low"))
|
|
reg |= EMAC_CLK_EPHY_LED_POL;
|
|
else
|
|
reg &= ~EMAC_CLK_EPHY_LED_POL;
|
|
|
|
/* Set internal PHY addr to 1 */
|
|
reg &= ~EMAC_CLK_EPHY_ADDR;
|
|
reg |= (1 << EMAC_CLK_EPHY_ADDR_SHIFT);
|
|
} else {
|
|
reg &= ~EMAC_CLK_EPHY_SELECT;
|
|
}
|
|
}
|
|
|
|
if (bootverbose)
|
|
device_printf(dev, "EMAC clock: 0x%08x\n", reg);
|
|
syscon_write_emac_clk_reg(dev, reg);
|
|
} else {
|
|
if (strncmp(phy_type, "rgmii", 5) == 0)
|
|
tx_parent_name = "emac_int_tx";
|
|
else
|
|
tx_parent_name = "mii_phy_tx";
|
|
|
|
/* Get the TX clock */
|
|
error = clk_get_by_ofw_name(dev, 0, "tx", &clk_tx);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot get tx clock\n");
|
|
goto fail;
|
|
}
|
|
|
|
/* Find the desired parent clock based on phy-mode property */
|
|
error = clk_get_by_name(dev, tx_parent_name, &clk_tx_parent);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot get clock '%s'\n",
|
|
tx_parent_name);
|
|
goto fail;
|
|
}
|
|
|
|
/* Set TX clock parent */
|
|
error = clk_set_parent_by_clk(clk_tx, clk_tx_parent);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot set tx clock parent\n");
|
|
goto fail;
|
|
}
|
|
|
|
/* Enable TX clock */
|
|
error = clk_enable(clk_tx);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot enable tx clock\n");
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
error = 0;
|
|
|
|
fail:
|
|
OF_prop_free(phy_type);
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
awg_setup_extres(device_t dev)
|
|
{
|
|
struct awg_softc *sc;
|
|
phandle_t node, phy_node;
|
|
hwreset_t rst_ahb, rst_ephy;
|
|
clk_t clk_ahb, clk_ephy;
|
|
regulator_t reg;
|
|
uint64_t freq;
|
|
int error, div;
|
|
|
|
sc = device_get_softc(dev);
|
|
rst_ahb = rst_ephy = NULL;
|
|
clk_ahb = clk_ephy = NULL;
|
|
reg = NULL;
|
|
node = ofw_bus_get_node(dev);
|
|
phy_node = awg_get_phy_node(dev);
|
|
|
|
if (phy_node == 0 && OF_hasprop(node, "phy-handle")) {
|
|
error = ENXIO;
|
|
device_printf(dev, "cannot get phy handle\n");
|
|
goto fail;
|
|
}
|
|
|
|
/* Get AHB clock and reset resources */
|
|
error = hwreset_get_by_ofw_name(dev, 0, "stmmaceth", &rst_ahb);
|
|
if (error != 0)
|
|
error = hwreset_get_by_ofw_name(dev, 0, "ahb", &rst_ahb);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot get ahb reset\n");
|
|
goto fail;
|
|
}
|
|
if (hwreset_get_by_ofw_name(dev, 0, "ephy", &rst_ephy) != 0)
|
|
if (phy_node == 0 || hwreset_get_by_ofw_idx(dev, phy_node, 0,
|
|
&rst_ephy) != 0)
|
|
rst_ephy = NULL;
|
|
error = clk_get_by_ofw_name(dev, 0, "stmmaceth", &clk_ahb);
|
|
if (error != 0)
|
|
error = clk_get_by_ofw_name(dev, 0, "ahb", &clk_ahb);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot get ahb clock\n");
|
|
goto fail;
|
|
}
|
|
if (clk_get_by_ofw_name(dev, 0, "ephy", &clk_ephy) != 0)
|
|
if (phy_node == 0 || clk_get_by_ofw_index(dev, phy_node, 0,
|
|
&clk_ephy) != 0)
|
|
clk_ephy = NULL;
|
|
|
|
if (OF_hasprop(node, "syscon") && syscon_get_by_ofw_property(dev, node,
|
|
"syscon", &sc->syscon) != 0) {
|
|
device_printf(dev, "cannot get syscon driver handle\n");
|
|
goto fail;
|
|
}
|
|
|
|
/* Configure PHY for MII or RGMII mode */
|
|
if (awg_setup_phy(dev) != 0)
|
|
goto fail;
|
|
|
|
/* Enable clocks */
|
|
error = clk_enable(clk_ahb);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot enable ahb clock\n");
|
|
goto fail;
|
|
}
|
|
if (clk_ephy != NULL) {
|
|
error = clk_enable(clk_ephy);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot enable ephy clock\n");
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
/* De-assert reset */
|
|
error = hwreset_deassert(rst_ahb);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot de-assert ahb reset\n");
|
|
goto fail;
|
|
}
|
|
if (rst_ephy != NULL) {
|
|
error = hwreset_deassert(rst_ephy);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot de-assert ephy reset\n");
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
/* Enable PHY regulator if applicable */
|
|
if (regulator_get_by_ofw_property(dev, 0, "phy-supply", ®) == 0) {
|
|
error = regulator_enable(reg);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot enable PHY regulator\n");
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
/* Determine MDC clock divide ratio based on AHB clock */
|
|
error = clk_get_freq(clk_ahb, &freq);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot get AHB clock frequency\n");
|
|
goto fail;
|
|
}
|
|
div = freq / MDIO_FREQ;
|
|
if (div <= 16)
|
|
sc->mdc_div_ratio_m = MDC_DIV_RATIO_M_16;
|
|
else if (div <= 32)
|
|
sc->mdc_div_ratio_m = MDC_DIV_RATIO_M_32;
|
|
else if (div <= 64)
|
|
sc->mdc_div_ratio_m = MDC_DIV_RATIO_M_64;
|
|
else if (div <= 128)
|
|
sc->mdc_div_ratio_m = MDC_DIV_RATIO_M_128;
|
|
else {
|
|
device_printf(dev, "cannot determine MDC clock divide ratio\n");
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
if (bootverbose)
|
|
device_printf(dev, "AHB frequency %ju Hz, MDC div: 0x%x\n",
|
|
(uintmax_t)freq, sc->mdc_div_ratio_m);
|
|
|
|
return (0);
|
|
|
|
fail:
|
|
if (reg != NULL)
|
|
regulator_release(reg);
|
|
if (clk_ephy != NULL)
|
|
clk_release(clk_ephy);
|
|
if (clk_ahb != NULL)
|
|
clk_release(clk_ahb);
|
|
if (rst_ephy != NULL)
|
|
hwreset_release(rst_ephy);
|
|
if (rst_ahb != NULL)
|
|
hwreset_release(rst_ahb);
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
awg_get_eaddr(device_t dev, uint8_t *eaddr)
|
|
{
|
|
struct awg_softc *sc;
|
|
uint32_t maclo, machi, rnd;
|
|
u_char rootkey[16];
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
machi = RD4(sc, EMAC_ADDR_HIGH(0)) & 0xffff;
|
|
maclo = RD4(sc, EMAC_ADDR_LOW(0));
|
|
|
|
if (maclo == 0xffffffff && machi == 0xffff) {
|
|
/* MAC address in hardware is invalid, create one */
|
|
if (aw_sid_get_rootkey(rootkey) == 0 &&
|
|
(rootkey[3] | rootkey[12] | rootkey[13] | rootkey[14] |
|
|
rootkey[15]) != 0) {
|
|
/* MAC address is derived from the root key in SID */
|
|
maclo = (rootkey[13] << 24) | (rootkey[12] << 16) |
|
|
(rootkey[3] << 8) | 0x02;
|
|
machi = (rootkey[15] << 8) | rootkey[14];
|
|
} else {
|
|
/* Create one */
|
|
rnd = arc4random();
|
|
maclo = 0x00f2 | (rnd & 0xffff0000);
|
|
machi = rnd & 0xffff;
|
|
}
|
|
}
|
|
|
|
eaddr[0] = maclo & 0xff;
|
|
eaddr[1] = (maclo >> 8) & 0xff;
|
|
eaddr[2] = (maclo >> 16) & 0xff;
|
|
eaddr[3] = (maclo >> 24) & 0xff;
|
|
eaddr[4] = machi & 0xff;
|
|
eaddr[5] = (machi >> 8) & 0xff;
|
|
}
|
|
|
|
#ifdef AWG_DEBUG
|
|
static void
|
|
awg_dump_regs(device_t dev)
|
|
{
|
|
static const struct {
|
|
const char *name;
|
|
u_int reg;
|
|
} regs[] = {
|
|
{ "BASIC_CTL_0", EMAC_BASIC_CTL_0 },
|
|
{ "BASIC_CTL_1", EMAC_BASIC_CTL_1 },
|
|
{ "INT_STA", EMAC_INT_STA },
|
|
{ "INT_EN", EMAC_INT_EN },
|
|
{ "TX_CTL_0", EMAC_TX_CTL_0 },
|
|
{ "TX_CTL_1", EMAC_TX_CTL_1 },
|
|
{ "TX_FLOW_CTL", EMAC_TX_FLOW_CTL },
|
|
{ "TX_DMA_LIST", EMAC_TX_DMA_LIST },
|
|
{ "RX_CTL_0", EMAC_RX_CTL_0 },
|
|
{ "RX_CTL_1", EMAC_RX_CTL_1 },
|
|
{ "RX_DMA_LIST", EMAC_RX_DMA_LIST },
|
|
{ "RX_FRM_FLT", EMAC_RX_FRM_FLT },
|
|
{ "RX_HASH_0", EMAC_RX_HASH_0 },
|
|
{ "RX_HASH_1", EMAC_RX_HASH_1 },
|
|
{ "MII_CMD", EMAC_MII_CMD },
|
|
{ "ADDR_HIGH0", EMAC_ADDR_HIGH(0) },
|
|
{ "ADDR_LOW0", EMAC_ADDR_LOW(0) },
|
|
{ "TX_DMA_STA", EMAC_TX_DMA_STA },
|
|
{ "TX_DMA_CUR_DESC", EMAC_TX_DMA_CUR_DESC },
|
|
{ "TX_DMA_CUR_BUF", EMAC_TX_DMA_CUR_BUF },
|
|
{ "RX_DMA_STA", EMAC_RX_DMA_STA },
|
|
{ "RX_DMA_CUR_DESC", EMAC_RX_DMA_CUR_DESC },
|
|
{ "RX_DMA_CUR_BUF", EMAC_RX_DMA_CUR_BUF },
|
|
{ "RGMII_STA", EMAC_RGMII_STA },
|
|
};
|
|
struct awg_softc *sc;
|
|
unsigned int n;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
for (n = 0; n < nitems(regs); n++)
|
|
device_printf(dev, " %-20s %08x\n", regs[n].name,
|
|
RD4(sc, regs[n].reg));
|
|
}
|
|
#endif
|
|
|
|
#define GPIO_ACTIVE_LOW 1
|
|
|
|
static int
|
|
awg_phy_reset(device_t dev)
|
|
{
|
|
pcell_t gpio_prop[4], delay_prop[3];
|
|
phandle_t node, gpio_node;
|
|
device_t gpio;
|
|
uint32_t pin, flags;
|
|
uint32_t pin_value;
|
|
|
|
node = ofw_bus_get_node(dev);
|
|
if (OF_getencprop(node, "allwinner,reset-gpio", gpio_prop,
|
|
sizeof(gpio_prop)) <= 0)
|
|
return (0);
|
|
|
|
if (OF_getencprop(node, "allwinner,reset-delays-us", delay_prop,
|
|
sizeof(delay_prop)) <= 0)
|
|
return (ENXIO);
|
|
|
|
gpio_node = OF_node_from_xref(gpio_prop[0]);
|
|
if ((gpio = OF_device_from_xref(gpio_prop[0])) == NULL)
|
|
return (ENXIO);
|
|
|
|
if (GPIO_MAP_GPIOS(gpio, node, gpio_node, nitems(gpio_prop) - 1,
|
|
gpio_prop + 1, &pin, &flags) != 0)
|
|
return (ENXIO);
|
|
|
|
pin_value = GPIO_PIN_LOW;
|
|
if (OF_hasprop(node, "allwinner,reset-active-low"))
|
|
pin_value = GPIO_PIN_HIGH;
|
|
|
|
if (flags & GPIO_ACTIVE_LOW)
|
|
pin_value = !pin_value;
|
|
|
|
GPIO_PIN_SETFLAGS(gpio, pin, GPIO_PIN_OUTPUT);
|
|
GPIO_PIN_SET(gpio, pin, pin_value);
|
|
DELAY(delay_prop[0]);
|
|
GPIO_PIN_SET(gpio, pin, !pin_value);
|
|
DELAY(delay_prop[1]);
|
|
GPIO_PIN_SET(gpio, pin, pin_value);
|
|
DELAY(delay_prop[2]);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
awg_reset(device_t dev)
|
|
{
|
|
struct awg_softc *sc;
|
|
int retry;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
/* Reset PHY if necessary */
|
|
if (awg_phy_reset(dev) != 0) {
|
|
device_printf(dev, "failed to reset PHY\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
/* Soft reset all registers and logic */
|
|
WR4(sc, EMAC_BASIC_CTL_1, BASIC_CTL_SOFT_RST);
|
|
|
|
/* Wait for soft reset bit to self-clear */
|
|
for (retry = SOFT_RST_RETRY; retry > 0; retry--) {
|
|
if ((RD4(sc, EMAC_BASIC_CTL_1) & BASIC_CTL_SOFT_RST) == 0)
|
|
break;
|
|
DELAY(10);
|
|
}
|
|
if (retry == 0) {
|
|
device_printf(dev, "soft reset timed out\n");
|
|
#ifdef AWG_DEBUG
|
|
awg_dump_regs(dev);
|
|
#endif
|
|
return (ETIMEDOUT);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
awg_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error)
|
|
{
|
|
if (error != 0)
|
|
return;
|
|
*(bus_addr_t *)arg = segs[0].ds_addr;
|
|
}
|
|
|
|
static int
|
|
awg_setup_dma(device_t dev)
|
|
{
|
|
struct awg_softc *sc;
|
|
int error, i;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
/* Setup TX ring */
|
|
error = bus_dma_tag_create(
|
|
bus_get_dma_tag(dev), /* Parent tag */
|
|
DESC_ALIGN, 0, /* alignment, boundary */
|
|
BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
|
|
BUS_SPACE_MAXADDR, /* highaddr */
|
|
NULL, NULL, /* filter, filterarg */
|
|
TX_DESC_SIZE, 1, /* maxsize, nsegs */
|
|
TX_DESC_SIZE, /* maxsegsize */
|
|
0, /* flags */
|
|
NULL, NULL, /* lockfunc, lockarg */
|
|
&sc->tx.desc_tag);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot create TX descriptor ring tag\n");
|
|
return (error);
|
|
}
|
|
|
|
error = bus_dmamem_alloc(sc->tx.desc_tag, (void **)&sc->tx.desc_ring,
|
|
BUS_DMA_COHERENT | BUS_DMA_WAITOK | BUS_DMA_ZERO, &sc->tx.desc_map);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot allocate TX descriptor ring\n");
|
|
return (error);
|
|
}
|
|
|
|
error = bus_dmamap_load(sc->tx.desc_tag, sc->tx.desc_map,
|
|
sc->tx.desc_ring, TX_DESC_SIZE, awg_dmamap_cb,
|
|
&sc->tx.desc_ring_paddr, 0);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot load TX descriptor ring\n");
|
|
return (error);
|
|
}
|
|
|
|
for (i = 0; i < TX_DESC_COUNT; i++)
|
|
sc->tx.desc_ring[i].next =
|
|
htole32(sc->tx.desc_ring_paddr + DESC_OFF(TX_NEXT(i)));
|
|
|
|
error = bus_dma_tag_create(
|
|
bus_get_dma_tag(dev), /* Parent tag */
|
|
1, 0, /* alignment, boundary */
|
|
BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
|
|
BUS_SPACE_MAXADDR, /* highaddr */
|
|
NULL, NULL, /* filter, filterarg */
|
|
MCLBYTES, TX_MAX_SEGS, /* maxsize, nsegs */
|
|
MCLBYTES, /* maxsegsize */
|
|
0, /* flags */
|
|
NULL, NULL, /* lockfunc, lockarg */
|
|
&sc->tx.buf_tag);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot create TX buffer tag\n");
|
|
return (error);
|
|
}
|
|
|
|
sc->tx.queued = 0;
|
|
for (i = 0; i < TX_DESC_COUNT; i++) {
|
|
error = bus_dmamap_create(sc->tx.buf_tag, 0,
|
|
&sc->tx.buf_map[i].map);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot create TX buffer map\n");
|
|
return (error);
|
|
}
|
|
}
|
|
|
|
/* Setup RX ring */
|
|
error = bus_dma_tag_create(
|
|
bus_get_dma_tag(dev), /* Parent tag */
|
|
DESC_ALIGN, 0, /* alignment, boundary */
|
|
BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
|
|
BUS_SPACE_MAXADDR, /* highaddr */
|
|
NULL, NULL, /* filter, filterarg */
|
|
RX_DESC_SIZE, 1, /* maxsize, nsegs */
|
|
RX_DESC_SIZE, /* maxsegsize */
|
|
0, /* flags */
|
|
NULL, NULL, /* lockfunc, lockarg */
|
|
&sc->rx.desc_tag);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot create RX descriptor ring tag\n");
|
|
return (error);
|
|
}
|
|
|
|
error = bus_dmamem_alloc(sc->rx.desc_tag, (void **)&sc->rx.desc_ring,
|
|
BUS_DMA_COHERENT | BUS_DMA_WAITOK | BUS_DMA_ZERO, &sc->rx.desc_map);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot allocate RX descriptor ring\n");
|
|
return (error);
|
|
}
|
|
|
|
error = bus_dmamap_load(sc->rx.desc_tag, sc->rx.desc_map,
|
|
sc->rx.desc_ring, RX_DESC_SIZE, awg_dmamap_cb,
|
|
&sc->rx.desc_ring_paddr, 0);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot load RX descriptor ring\n");
|
|
return (error);
|
|
}
|
|
|
|
error = bus_dma_tag_create(
|
|
bus_get_dma_tag(dev), /* Parent tag */
|
|
1, 0, /* alignment, boundary */
|
|
BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
|
|
BUS_SPACE_MAXADDR, /* highaddr */
|
|
NULL, NULL, /* filter, filterarg */
|
|
MCLBYTES, 1, /* maxsize, nsegs */
|
|
MCLBYTES, /* maxsegsize */
|
|
0, /* flags */
|
|
NULL, NULL, /* lockfunc, lockarg */
|
|
&sc->rx.buf_tag);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot create RX buffer tag\n");
|
|
return (error);
|
|
}
|
|
|
|
error = bus_dmamap_create(sc->rx.buf_tag, 0, &sc->rx.buf_spare_map);
|
|
if (error != 0) {
|
|
device_printf(dev,
|
|
"cannot create RX buffer spare map\n");
|
|
return (error);
|
|
}
|
|
|
|
for (i = 0; i < RX_DESC_COUNT; i++) {
|
|
sc->rx.desc_ring[i].next =
|
|
htole32(sc->rx.desc_ring_paddr + DESC_OFF(RX_NEXT(i)));
|
|
|
|
error = bus_dmamap_create(sc->rx.buf_tag, 0,
|
|
&sc->rx.buf_map[i].map);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot create RX buffer map\n");
|
|
return (error);
|
|
}
|
|
sc->rx.buf_map[i].mbuf = NULL;
|
|
error = awg_newbuf_rx(sc, i);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot create RX buffer\n");
|
|
return (error);
|
|
}
|
|
}
|
|
bus_dmamap_sync(sc->rx.desc_tag, sc->rx.desc_map,
|
|
BUS_DMASYNC_PREWRITE);
|
|
|
|
/* Write transmit and receive descriptor base address registers */
|
|
WR4(sc, EMAC_TX_DMA_LIST, sc->tx.desc_ring_paddr);
|
|
WR4(sc, EMAC_RX_DMA_LIST, sc->rx.desc_ring_paddr);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
awg_probe(device_t dev)
|
|
{
|
|
if (!ofw_bus_status_okay(dev))
|
|
return (ENXIO);
|
|
|
|
if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0)
|
|
return (ENXIO);
|
|
|
|
device_set_desc(dev, "Allwinner Gigabit Ethernet");
|
|
return (BUS_PROBE_DEFAULT);
|
|
}
|
|
|
|
static int
|
|
awg_attach(device_t dev)
|
|
{
|
|
uint8_t eaddr[ETHER_ADDR_LEN];
|
|
struct awg_softc *sc;
|
|
int error;
|
|
|
|
sc = device_get_softc(dev);
|
|
sc->dev = dev;
|
|
sc->type = ofw_bus_search_compatible(dev, compat_data)->ocd_data;
|
|
|
|
if (bus_alloc_resources(dev, awg_spec, sc->res) != 0) {
|
|
device_printf(dev, "cannot allocate resources for device\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
mtx_init(&sc->mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK, MTX_DEF);
|
|
callout_init_mtx(&sc->stat_ch, &sc->mtx, 0);
|
|
TASK_INIT(&sc->link_task, 0, awg_link_task, sc);
|
|
|
|
/* Setup clocks and regulators */
|
|
error = awg_setup_extres(dev);
|
|
if (error != 0)
|
|
return (error);
|
|
|
|
/* Read MAC address before resetting the chip */
|
|
awg_get_eaddr(dev, eaddr);
|
|
|
|
/* Soft reset EMAC core */
|
|
error = awg_reset(dev);
|
|
if (error != 0)
|
|
return (error);
|
|
|
|
/* Setup DMA descriptors */
|
|
error = awg_setup_dma(dev);
|
|
if (error != 0)
|
|
return (error);
|
|
|
|
/* Install interrupt handler */
|
|
error = bus_setup_intr(dev, sc->res[_RES_IRQ],
|
|
INTR_TYPE_NET | INTR_MPSAFE, NULL, awg_intr, sc, &sc->ih);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot setup interrupt handler\n");
|
|
return (error);
|
|
}
|
|
|
|
/* Setup ethernet interface */
|
|
sc->ifp = if_alloc(IFT_ETHER);
|
|
if_setsoftc(sc->ifp, sc);
|
|
if_initname(sc->ifp, device_get_name(dev), device_get_unit(dev));
|
|
if_setflags(sc->ifp, IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST);
|
|
if_setstartfn(sc->ifp, awg_start);
|
|
if_setioctlfn(sc->ifp, awg_ioctl);
|
|
if_setinitfn(sc->ifp, awg_init);
|
|
if_setsendqlen(sc->ifp, TX_DESC_COUNT - 1);
|
|
if_setsendqready(sc->ifp);
|
|
if_sethwassist(sc->ifp, CSUM_IP | CSUM_UDP | CSUM_TCP);
|
|
if_setcapabilities(sc->ifp, IFCAP_VLAN_MTU | IFCAP_HWCSUM);
|
|
if_setcapenable(sc->ifp, if_getcapabilities(sc->ifp));
|
|
#ifdef DEVICE_POLLING
|
|
if_setcapabilitiesbit(sc->ifp, IFCAP_POLLING, 0);
|
|
#endif
|
|
|
|
/* Attach MII driver */
|
|
error = mii_attach(dev, &sc->miibus, sc->ifp, awg_media_change,
|
|
awg_media_status, BMSR_DEFCAPMASK, MII_PHY_ANY, MII_OFFSET_ANY,
|
|
MIIF_DOPAUSE);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot attach PHY\n");
|
|
return (error);
|
|
}
|
|
|
|
/* Attach ethernet interface */
|
|
ether_ifattach(sc->ifp, eaddr);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static device_method_t awg_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, awg_probe),
|
|
DEVMETHOD(device_attach, awg_attach),
|
|
|
|
/* MII interface */
|
|
DEVMETHOD(miibus_readreg, awg_miibus_readreg),
|
|
DEVMETHOD(miibus_writereg, awg_miibus_writereg),
|
|
DEVMETHOD(miibus_statchg, awg_miibus_statchg),
|
|
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static driver_t awg_driver = {
|
|
"awg",
|
|
awg_methods,
|
|
sizeof(struct awg_softc),
|
|
};
|
|
|
|
static devclass_t awg_devclass;
|
|
|
|
DRIVER_MODULE(awg, simplebus, awg_driver, awg_devclass, 0, 0);
|
|
DRIVER_MODULE(miibus, awg, miibus_driver, miibus_devclass, 0, 0);
|
|
|
|
MODULE_DEPEND(awg, ether, 1, 1, 1);
|
|
MODULE_DEPEND(awg, miibus, 1, 1, 1);
|