326 lines
11 KiB
Plaintext
326 lines
11 KiB
Plaintext
--
|
|
-- Copyright (C) The Internet Society (2005).
|
|
--
|
|
-- This document is subject to the rights, licenses and restrictions
|
|
-- contained in BCP 78, and except as set forth therein, the authors
|
|
-- retain all their rights.
|
|
--
|
|
-- This document and the information contained herein are provided on an
|
|
-- "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
|
|
-- OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
|
|
-- ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
|
|
-- INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
|
|
-- INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
|
|
-- WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
|
|
--
|
|
-- $FreeBSD$
|
|
--
|
|
|
|
RSTP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- -------------------------------------------------------------
|
|
-- MIB for IEEE 802.1w Rapid Spanning Tree Protocol
|
|
-- -------------------------------------------------------------
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32, mib-2
|
|
FROM SNMPv2-SMI
|
|
TruthValue
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
dot1dStp, dot1dStpPortEntry
|
|
FROM BRIDGE-MIB;
|
|
|
|
rstpMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200512070000Z"
|
|
ORGANIZATION "IETF Bridge MIB Working Group"
|
|
CONTACT-INFO
|
|
"Email: Bridge-mib@ietf.org"
|
|
DESCRIPTION
|
|
"The Bridge MIB Extension module for managing devices
|
|
that support the Rapid Spanning Tree Protocol defined
|
|
by IEEE 802.1w.
|
|
|
|
Copyright (C) The Internet Society (2005). This version of
|
|
this MIB module is part of RFC 4318; See the RFC itself for
|
|
full legal notices."
|
|
|
|
REVISION "200512070000Z"
|
|
DESCRIPTION
|
|
"The initial version of this MIB module as published in
|
|
RFC 4318."
|
|
::= { mib-2 134 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- subtrees in the RSTP-MIB
|
|
-- ---------------------------------------------------------- --
|
|
|
|
rstpNotifications OBJECT IDENTIFIER ::= { rstpMIB 0 }
|
|
rstpObjects OBJECT IDENTIFIER ::= { rstpMIB 1 }
|
|
rstpConformance OBJECT IDENTIFIER ::= { rstpMIB 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Addition to the dot1dStp group
|
|
-- -------------------------------------------------------------
|
|
|
|
dot1dStpVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
stpCompatible(0),
|
|
rstp(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version of Spanning Tree Protocol the bridge is
|
|
currently running. The value 'stpCompatible(0)'
|
|
indicates the Spanning Tree Protocol specified in
|
|
IEEE 802.1D-1998 and 'rstp(2)' indicates the Rapid
|
|
Spanning Tree Protocol specified in IEEE 802.1w and
|
|
clause 17 of 802.1D-2004. The values are directly from
|
|
the IEEE standard. New values may be defined as future
|
|
versions of the protocol become available.
|
|
|
|
The value of this object MUST be retained across
|
|
reinitializations of the management system."
|
|
REFERENCE
|
|
"IEEE 802.1w clause 14.8.1, 17.12, 17.16.1"
|
|
DEFVAL { rstp }
|
|
::= { dot1dStp 16 }
|
|
|
|
dot1dStpTxHoldCount OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value used by the Port Transmit state machine to limit
|
|
the maximum transmission rate.
|
|
|
|
The value of this object MUST be retained across
|
|
reinitializations of the management system."
|
|
|
|
REFERENCE
|
|
"IEEE 802.1w clause 17.16.6"
|
|
DEFVAL { 3 }
|
|
::= { dot1dStp 17 }
|
|
|
|
--
|
|
-- { dot1dStp 18 } was used to represent dot1dStpPathCostDefault
|
|
-- in an earlier version of this MIB. It has since been
|
|
-- obsoleted, and should not be used.
|
|
--
|
|
|
|
dot1dStpExtPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1dStpExtPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains port-specific Rapid Spanning Tree
|
|
information."
|
|
::= { dot1dStp 19 }
|
|
|
|
dot1dStpExtPortEntry OBJECT-TYPE
|
|
SYNTAX Dot1dStpExtPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of Rapid Spanning Tree information maintained by
|
|
each port."
|
|
AUGMENTS { dot1dStpPortEntry }
|
|
::= { dot1dStpExtPortTable 1 }
|
|
|
|
Dot1dStpExtPortEntry ::=
|
|
SEQUENCE {
|
|
dot1dStpPortProtocolMigration
|
|
TruthValue,
|
|
dot1dStpPortAdminEdgePort
|
|
TruthValue,
|
|
dot1dStpPortOperEdgePort
|
|
TruthValue,
|
|
dot1dStpPortAdminPointToPoint
|
|
INTEGER,
|
|
dot1dStpPortOperPointToPoint
|
|
TruthValue,
|
|
dot1dStpPortAdminPathCost
|
|
Integer32
|
|
}
|
|
|
|
dot1dStpPortProtocolMigration OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When operating in RSTP (version 2) mode, writing true(1)
|
|
to this object forces this port to transmit RSTP BPDUs.
|
|
Any other operation on this object has no effect and
|
|
it always returns false(2) when read."
|
|
REFERENCE
|
|
"IEEE 802.1w clause 14.8.2.4, 17.18.10, 17.26"
|
|
::= { dot1dStpExtPortEntry 1 }
|
|
|
|
dot1dStpPortAdminEdgePort OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative value of the Edge Port parameter. A
|
|
value of true(1) indicates that this port should be
|
|
assumed as an edge-port, and a value of false(2) indicates
|
|
that this port should be assumed as a non-edge-port.
|
|
Setting this object will also cause the corresponding
|
|
instance of dot1dStpPortOperEdgePort to change to the
|
|
same value. Note that even when this object's value
|
|
is true, the value of the corresponding instance of
|
|
dot1dStpPortOperEdgePort can be false if a BPDU has
|
|
been received.
|
|
|
|
The value of this object MUST be retained across
|
|
reinitializations of the management system."
|
|
|
|
REFERENCE
|
|
"IEEE 802.1t clause 14.8.2, 18.3.3"
|
|
::= { dot1dStpExtPortEntry 2 }
|
|
|
|
dot1dStpPortOperEdgePort OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational value of the Edge Port parameter. The
|
|
object is initialized to the value of the corresponding
|
|
instance of dot1dStpPortAdminEdgePort. When the
|
|
corresponding instance of dot1dStpPortAdminEdgePort is
|
|
set, this object will be changed as well. This object
|
|
will also be changed to false on reception of a BPDU."
|
|
|
|
REFERENCE
|
|
"IEEE 802.1t clause 14.8.2, 18.3.4"
|
|
::= { dot1dStpExtPortEntry 3 }
|
|
|
|
dot1dStpPortAdminPointToPoint OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
forceTrue(0),
|
|
forceFalse(1),
|
|
auto(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative point-to-point status of the LAN segment
|
|
attached to this port, using the enumeration values of the
|
|
IEEE 802.1w clause. A value of forceTrue(0) indicates
|
|
that this port should always be treated as if it is
|
|
connected to a point-to-point link. A value of
|
|
forceFalse(1) indicates that this port should be treated as
|
|
having a shared media connection. A value of auto(2)
|
|
indicates that this port is considered to have a
|
|
point-to-point link if it is an Aggregator and all of its
|
|
members are aggregatable, or if the MAC entity
|
|
is configured for full duplex operation, either through
|
|
auto-negotiation or by management means. Manipulating this
|
|
object changes the underlying adminPortToPortMAC.
|
|
|
|
The value of this object MUST be retained across
|
|
reinitializations of the management system."
|
|
|
|
REFERENCE
|
|
"IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
|
|
::= { dot1dStpExtPortEntry 4 }
|
|
|
|
dot1dStpPortOperPointToPoint OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational point-to-point status of the LAN segment
|
|
attached to this port. It indicates whether a port is
|
|
considered to have a point-to-point connection.
|
|
If adminPointToPointMAC is set to auto(2), then the value
|
|
of operPointToPointMAC is determined in accordance with the
|
|
specific procedures defined for the MAC entity concerned,
|
|
as defined in IEEE 802.1w, clause 6.5. The value is
|
|
determined dynamically; that is, it is re-evaluated whenever
|
|
the value of adminPointToPointMAC changes, and whenever
|
|
the specific procedures defined for the MAC entity evaluate
|
|
a change in its point-to-point status."
|
|
REFERENCE
|
|
"IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
|
|
::= { dot1dStpExtPortEntry 5 }
|
|
|
|
dot1dStpPortAdminPathCost OBJECT-TYPE
|
|
SYNTAX Integer32 (0..200000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administratively assigned value for the contribution
|
|
of this port to the path cost of paths toward the spanning
|
|
tree root.
|
|
|
|
Writing a value of '0' assigns the automatically calculated
|
|
default Path Cost value to the port. If the default Path
|
|
Cost is being used, this object returns '0' when read.
|
|
|
|
This complements the object dot1dStpPortPathCost or
|
|
dot1dStpPortPathCost32, which returns the operational value
|
|
of the path cost.
|
|
|
|
The value of this object MUST be retained across
|
|
reinitializations of the management system."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: Section 8.5.5.3"
|
|
::= { dot1dStpExtPortEntry 6 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- rstpMIB - Conformance Information
|
|
-- -------------------------------------------------------------
|
|
|
|
rstpGroups OBJECT IDENTIFIER ::= { rstpConformance 1 }
|
|
|
|
rstpCompliances OBJECT IDENTIFIER ::= { rstpConformance 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Units of conformance
|
|
-- -------------------------------------------------------------
|
|
|
|
rstpBridgeGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1dStpVersion,
|
|
dot1dStpTxHoldCount
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rapid Spanning Tree information for the bridge."
|
|
::= { rstpGroups 1 }
|
|
|
|
rstpPortGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1dStpPortProtocolMigration,
|
|
dot1dStpPortAdminEdgePort,
|
|
dot1dStpPortOperEdgePort,
|
|
dot1dStpPortAdminPointToPoint,
|
|
dot1dStpPortOperPointToPoint,
|
|
dot1dStpPortAdminPathCost
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rapid Spanning Tree information for individual ports."
|
|
::= { rstpGroups 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Compliance statements
|
|
-- -------------------------------------------------------------
|
|
|
|
rstpCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for device support of Rapid
|
|
Spanning Tree Protocol (RSTP) bridging services."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
rstpBridgeGroup,
|
|
rstpPortGroup
|
|
}
|
|
::= { rstpCompliances 1 }
|
|
|
|
END
|