freebsd-dev/sys/dev/hfa/fore_receive.c
Jonathan Lemon df5e198723 Lock down the network interface queues. The queue mutex must be obtained
before adding/removing packets from the queue.  Also, the if_obytes and
if_omcasts fields should only be manipulated under protection of the mutex.

IF_ENQUEUE, IF_PREPEND, and IF_DEQUEUE perform all necessary locking on
the queue.  An IF_LOCK macro is provided, as well as the old (mutex-less)
versions of the macros in the form _IF_ENQUEUE, _IF_QFULL, for code which
needs them, but their use is discouraged.

Two new macros are introduced: IF_DRAIN() to drain a queue, and IF_HANDOFF,
which takes care of locking/enqueue, and also statistics updating/start
if necessary.
2000-11-25 07:35:38 +00:00

607 lines
13 KiB
C

/*
*
* ===================================
* HARP | Host ATM Research Platform
* ===================================
*
*
* This Host ATM Research Platform ("HARP") file (the "Software") is
* made available by Network Computing Services, Inc. ("NetworkCS")
* "AS IS". NetworkCS does not provide maintenance, improvements or
* support of any kind.
*
* NETWORKCS MAKES NO WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED,
* INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY
* AND FITNESS FOR A PARTICULAR PURPOSE, AS TO ANY ELEMENT OF THE
* SOFTWARE OR ANY SUPPORT PROVIDED IN CONNECTION WITH THIS SOFTWARE.
* In no event shall NetworkCS be responsible for any damages, including
* but not limited to consequential damages, arising from or relating to
* any use of the Software or related support.
*
* Copyright 1994-1998 Network Computing Services, Inc.
*
* Copies of this Software may be made, however, the above copyright
* notice must be reproduced on all copies.
*
* @(#) $FreeBSD$
*
*/
/*
* FORE Systems 200-Series Adapter Support
* ---------------------------------------
*
* Receive queue management
*
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/syslog.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <net/if.h>
#include <net/netisr.h>
#include <netatm/port.h>
#include <netatm/queue.h>
#include <netatm/atm.h>
#include <netatm/atm_sys.h>
#include <netatm/atm_sap.h>
#include <netatm/atm_cm.h>
#include <netatm/atm_if.h>
#include <netatm/atm_vc.h>
#include <netatm/atm_stack.h>
#include <netatm/atm_pcb.h>
#include <netatm/atm_var.h>
#include <pci/pcivar.h>
#include <dev/hfa/fore.h>
#include <dev/hfa/fore_aali.h>
#include <dev/hfa/fore_slave.h>
#include <dev/hfa/fore_stats.h>
#include <dev/hfa/fore_var.h>
#include <dev/hfa/fore_include.h>
#ifndef lint
__RCSID("@(#) $FreeBSD$");
#endif
/*
* Local functions
*/
static void fore_recv_stack __P((void *, KBuffer *));
/*
* Allocate Receive Queue Data Structures
*
* Arguments:
* fup pointer to device unit structure
*
* Returns:
* 0 allocations successful
* else allocation failed
*/
int
fore_recv_allocate(fup)
Fore_unit *fup;
{
caddr_t memp;
/*
* Allocate non-cacheable memory for receive status words
*/
memp = atm_dev_alloc(sizeof(Q_status) * RECV_QUELEN,
QSTAT_ALIGN, ATM_DEV_NONCACHE);
if (memp == NULL) {
return (1);
}
fup->fu_recv_stat = (Q_status *) memp;
memp = DMA_GET_ADDR(fup->fu_recv_stat, sizeof(Q_status) * RECV_QUELEN,
QSTAT_ALIGN, ATM_DEV_NONCACHE);
if (memp == NULL) {
return (1);
}
fup->fu_recv_statd = (Q_status *) memp;
/*
* Allocate memory for receive descriptors
*/
memp = atm_dev_alloc(sizeof(Recv_descr) * RECV_QUELEN,
RECV_DESCR_ALIGN, 0);
if (memp == NULL) {
return (1);
}
fup->fu_recv_desc = (Recv_descr *) memp;
memp = DMA_GET_ADDR(fup->fu_recv_desc,
sizeof(Recv_descr) * RECV_QUELEN, RECV_DESCR_ALIGN, 0);
if (memp == NULL) {
return (1);
}
fup->fu_recv_descd = (Recv_descr *) memp;
return (0);
}
/*
* Receive Queue Initialization
*
* Allocate and initialize the host-resident receive queue structures
* and then initialize the CP-resident queue structures.
*
* Called at interrupt level.
*
* Arguments:
* fup pointer to device unit structure
*
* Returns:
* none
*/
void
fore_recv_initialize(fup)
Fore_unit *fup;
{
Aali *aap = fup->fu_aali;
Recv_queue *cqp;
H_recv_queue *hrp;
Recv_descr *rdp;
Recv_descr *rdp_dma;
Q_status *qsp;
Q_status *qsp_dma;
int i;
/*
* Point to CP-resident receive queue
*/
cqp = (Recv_queue *)(fup->fu_ram + CP_READ(aap->aali_recv_q));
/*
* Point to host-resident receive queue structures
*/
hrp = fup->fu_recv_q;
qsp = fup->fu_recv_stat;
qsp_dma = fup->fu_recv_statd;
rdp = fup->fu_recv_desc;
rdp_dma = fup->fu_recv_descd;
/*
* Loop thru all queue entries and do whatever needs doing
*/
for (i = 0; i < RECV_QUELEN; i++) {
/*
* Set queue status word to free
*/
*qsp = QSTAT_FREE;
/*
* Set up host queue entry and link into ring
*/
hrp->hrq_cpelem = cqp;
hrp->hrq_status = qsp;
hrp->hrq_descr = rdp;
hrp->hrq_descr_dma = rdp_dma;
if (i == (RECV_QUELEN - 1))
hrp->hrq_next = fup->fu_recv_q;
else
hrp->hrq_next = hrp + 1;
/*
* Now let the CP into the game
*/
cqp->cq_descr = (CP_dma) CP_WRITE(rdp_dma);
cqp->cq_status = (CP_dma) CP_WRITE(qsp_dma);
/*
* Bump all queue pointers
*/
hrp++;
qsp++;
qsp_dma++;
rdp++;
rdp_dma++;
cqp++;
}
/*
* Initialize queue pointers
*/
fup->fu_recv_head = fup->fu_recv_q;
return;
}
/*
* Drain Receive Queue
*
* This function will process all completed entries at the head of the
* receive queue. The received segments will be linked into a received
* PDU buffer chain and it will then be passed up the PDU's VCC stack for
* processing by the next higher protocol layer.
*
* May be called in interrupt state.
* Must be called with interrupts locked out.
*
* Arguments:
* fup pointer to device unit structure
*
* Returns:
* none
*/
void
fore_recv_drain(fup)
Fore_unit *fup;
{
H_recv_queue *hrp = NULL;
Recv_descr *rdp;
Recv_seg_descr *rsp;
Buf_handle *bhp;
Fore_vcc *fvp;
struct vccb *vcp;
KBuffer *m, *mhead, *mtail;
caddr_t cp;
u_long hdr, nsegs;
u_int seglen, type0;
int i, pdulen, retries = 0, error;
/* Silence the compiler */
mtail = NULL;
type0 = 0;
/*
* Process each completed entry
*/
retry:
while (*fup->fu_recv_head->hrq_status & QSTAT_COMPLETED) {
/*
* Get completed entry's receive descriptor
*/
hrp = fup->fu_recv_head;
rdp = hrp->hrq_descr;
#ifdef VAC
/*
* Cache flush receive descriptor
*/
if (vac) {
vac_flush((addr_t)rdp, sizeof(Recv_descr));
}
#endif
hdr = rdp->rd_cell_hdr;
nsegs = rdp->rd_nsegs;
pdulen = 0;
error = 0;
mhead = NULL;
/*
* Locate incoming VCC for this PDU
*/
fvp = (Fore_vcc *) atm_dev_vcc_find((Cmn_unit *)fup,
ATM_HDR_GET_VPI(hdr), ATM_HDR_GET_VCI(hdr), VCC_IN);
/*
* Check for a receive error
*
* Apparently the receive descriptor itself contains valid
* information, but the received pdu data is probably bogus.
* We'll arrange for the receive buffer segments to be tossed.
*/
if (*hrp->hrq_status & QSTAT_ERROR) {
fup->fu_pif.pif_ierrors++;
if (fvp) {
vcp = fvp->fv_connvc->cvc_vcc;
vcp->vc_ierrors++;
if (vcp->vc_nif)
vcp->vc_nif->nif_if.if_ierrors++;
}
ATM_DEBUG1("fore receive error: hdr=0x%lx\n", hdr);
error = 1;
}
/*
* Build PDU buffer chain from receive segments
*/
for (i = 0, rsp = rdp->rd_seg; i < nsegs; i++, rsp++) {
bhp = rsp->rsd_handle;
seglen = rsp->rsd_len;
/*
* Remove buffer from our supplied queue and get
* to the underlying buffer
*/
switch (bhp->bh_type) {
case BHT_S1_SMALL:
DEQUEUE(bhp, Buf_handle, bh_qelem,
fup->fu_buf1s_bq);
fup->fu_buf1s_cnt--;
m = (KBuffer *) ((caddr_t)bhp - BUF1_SM_HOFF);
KB_DATASTART(m, cp, caddr_t);
DMA_FREE_ADDR(cp, bhp->bh_dma, BUF1_SM_SIZE, 0);
break;
case BHT_S1_LARGE:
DEQUEUE(bhp, Buf_handle, bh_qelem,
fup->fu_buf1l_bq);
fup->fu_buf1l_cnt--;
m = (KBuffer *) ((caddr_t)bhp - BUF1_LG_HOFF);
KB_DATASTART(m, cp, caddr_t);
DMA_FREE_ADDR(cp, bhp->bh_dma, BUF1_LG_SIZE, 0);
break;
default:
log(LOG_ERR,
"fore_recv_drain: bhp=%p type=0x%x\n",
bhp, bhp->bh_type);
panic("fore_recv_drain: bad buffer type");
}
/*
* Toss any zero-length or receive error buffers
*/
if ((seglen == 0) || error) {
KB_FREEALL(m);
continue;
}
/*
* Link buffer into chain
*/
if (mhead == NULL) {
type0 = bhp->bh_type;
KB_LINKHEAD(m, mhead);
mhead = m;
} else {
KB_LINK(m, mtail);
}
KB_LEN(m) = seglen;
pdulen += seglen;
mtail = m;
/*
* Flush received buffer data
*/
#ifdef VAC
if (vac) {
addr_t dp;
KB_DATASTART(m, dp, addr_t);
vac_pageflush(dp);
}
#endif
}
/*
* Make sure we've got a non-null PDU
*/
if (mhead == NULL) {
goto free_ent;
}
/*
* We only support user data PDUs (for now)
*/
if (hdr & ATM_HDR_SET_PT(ATM_PT_NONUSER)) {
KB_FREEALL(mhead);
goto free_ent;
}
/*
* Toss the data if there's no VCC
*/
if (fvp == NULL) {
fup->fu_stats->st_drv.drv_rv_novcc++;
KB_FREEALL(mhead);
goto free_ent;
}
#ifdef DIAGNOSTIC
if (atm_dev_print)
atm_dev_pdu_print((Cmn_unit *)fup, (Cmn_vcc *)fvp,
mhead, "fore_recv");
#endif
/*
* Make sure we have our queueing headroom at the front
* of the buffer chain
*/
if (type0 != BHT_S1_SMALL) {
/*
* Small buffers already have headroom built-in, but
* if CP had to use a large buffer for the first
* buffer, then we have to allocate a buffer here to
* contain the headroom.
*/
fup->fu_stats->st_drv.drv_rv_nosbf++;
KB_ALLOCPKT(m, BUF1_SM_SIZE, KB_F_NOWAIT, KB_T_DATA);
if (m == NULL) {
fup->fu_stats->st_drv.drv_rv_nomb++;
KB_FREEALL(mhead);
goto free_ent;
}
/*
* Put new buffer at head of PDU chain
*/
KB_LINKHEAD(m, mhead);
KB_LEN(m) = 0;
KB_HEADSET(m, BUF1_SM_DOFF);
mhead = m;
}
/*
* It looks like we've got a valid PDU - count it quick!!
*/
KB_PLENSET(mhead, pdulen);
fup->fu_pif.pif_ipdus++;
fup->fu_pif.pif_ibytes += pdulen;
vcp = fvp->fv_connvc->cvc_vcc;
vcp->vc_ipdus++;
vcp->vc_ibytes += pdulen;
if (vcp->vc_nif) {
vcp->vc_nif->nif_ibytes += pdulen;
vcp->vc_nif->nif_if.if_ipackets++;
#if (defined(BSD) && (BSD >= 199103))
vcp->vc_nif->nif_if.if_ibytes += pdulen;
#endif
}
/*
* The STACK_CALL needs to happen at splnet() in order
* for the stack sequence processing to work. Schedule an
* interrupt queue callback at splnet() since we are
* currently at device level.
*/
/*
* Prepend callback function pointer and token value to buffer.
* We have already guaranteed that the space is available
* in the first buffer.
*/
KB_HEADADJ(mhead, sizeof(atm_intr_func_t) + sizeof(int));
KB_DATASTART(mhead, cp, caddr_t);
*((atm_intr_func_t *)cp) = fore_recv_stack;
cp += sizeof(atm_intr_func_t);
*((void **)cp) = (void *)fvp;
/*
* Schedule callback
*/
if (IF_HANDOFF(&atm_intrq, mhead, NULL)) {
SCHED_ATM;
} else {
fup->fu_stats->st_drv.drv_rv_ifull++;
goto free_ent;
}
free_ent:
/*
* Mark this entry free for use and bump head pointer
* to the next entry in the queue
*/
*hrp->hrq_status = QSTAT_FREE;
hrp->hrq_cpelem->cq_descr =
(CP_dma) CP_WRITE((u_long)hrp->hrq_descr_dma);
fup->fu_recv_head = hrp->hrq_next;
}
/*
* Nearly all of the interrupts generated by the CP will be due
* to PDU reception. However, we may receive an interrupt before
* the CP has completed the status word DMA to host memory. Thus,
* if we haven't processed any PDUs during this interrupt, we will
* wait a bit for completed work on the receive queue, rather than
* having to field an extra interrupt very soon.
*/
if (hrp == NULL) {
if (++retries <= FORE_RECV_RETRY) {
DELAY(FORE_RECV_DELAY);
goto retry;
}
}
return;
}
/*
* Pass Incoming PDU up Stack
*
* This function is called via the core ATM interrupt queue callback
* set in fore_recv_drain(). It will pass the supplied incoming
* PDU up the incoming VCC's stack.
*
* Called at splnet.
*
* Arguments:
* tok token to identify stack instantiation
* m pointer to incoming PDU buffer chain
*
* Returns:
* none
*/
static void
fore_recv_stack(tok, m)
void *tok;
KBuffer *m;
{
Fore_vcc *fvp = (Fore_vcc *)tok;
int err;
/*
* Send the data up the stack
*/
STACK_CALL(CPCS_UNITDATA_SIG, fvp->fv_upper,
fvp->fv_toku, fvp->fv_connvc, (int)m, 0, err);
if (err)
KB_FREEALL(m);
return;
}
/*
* Free Receive Queue Data Structures
*
* Arguments:
* fup pointer to device unit structure
*
* Returns:
* none
*/
void
fore_recv_free(fup)
Fore_unit *fup;
{
/*
* We'll just let fore_buf_free() take care of freeing any
* buffers sitting on the receive queue (which are also still
* on the fu_*_bq queue).
*/
if (fup->fu_flags & CUF_INITED) {
}
/*
* Free the status words
*/
if (fup->fu_recv_stat) {
if (fup->fu_recv_statd) {
DMA_FREE_ADDR(fup->fu_recv_stat, fup->fu_recv_statd,
sizeof(Q_status) * RECV_QUELEN,
ATM_DEV_NONCACHE);
}
atm_dev_free((volatile void *)fup->fu_recv_stat);
fup->fu_recv_stat = NULL;
fup->fu_recv_statd = NULL;
}
/*
* Free the receive descriptors
*/
if (fup->fu_recv_desc) {
if (fup->fu_recv_descd) {
DMA_FREE_ADDR(fup->fu_recv_desc, fup->fu_recv_descd,
sizeof(Recv_descr) * RECV_QUELEN, 0);
}
atm_dev_free(fup->fu_recv_desc);
fup->fu_recv_desc = NULL;
fup->fu_recv_descd = NULL;
}
return;
}