freebsd-dev/sys/arm/xilinx/zy7_ehci.c
2016-11-14 11:41:22 +00:00

376 lines
11 KiB
C

/*-
* Copyright (c) 2012-2013 Thomas Skibo
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* A host-controller driver for Zynq-7000's USB OTG controller.
*
* Reference: Zynq-7000 All Programmable SoC Technical Reference Manual.
* (v1.4) November 16, 2012. Xilinx doc UG585. Ch. 15 covers the USB
* controller and register definitions are in appendix B.34.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/module.h>
#include <sys/mutex.h>
#include <sys/condvar.h>
#include <sys/resource.h>
#include <sys/rman.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <machine/stdarg.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usb_core.h>
#include <dev/usb/usb_busdma.h>
#include <dev/usb/usb_process.h>
#include <dev/usb/usb_util.h>
#include <dev/usb/usb_controller.h>
#include <dev/usb/usb_bus.h>
#include <dev/usb/controller/ehci.h>
#include <dev/usb/controller/ehcireg.h>
/* Register definitions. */
#define ZY7_USB_ID 0x0000
#define ZY7_USB_HWGENERAL 0x0004
#define ZY7_USB_HWHOST 0x0008
#define ZY7_USB_HWDEVICE 0x000c
#define ZY7_USB_HWTXBUF 0x0010
#define ZY7_USB_HWRXBUF 0x0014
#define ZY7_USB_GPTIMER0LD 0x0080
#define ZY7_USB_GPTIMER0CTRL 0x0084
#define ZY7_USB_GPTIMER1LD 0x0088
#define ZY7_USB_GPTIMER1CTRL 0x008c
#define ZY7_USB_SBUSCFG 0x0090
#define ZY7_USB_CAPLENGTH_HCIVERSION 0x0100
#define ZY7_USB_HCSPARAMS 0x0104
#define ZY7_USB_HCCPARAMS 0x0108
#define ZY7_USB_DCIVERSION 0x0120
#define ZY7_USB_DCCPARAMS 0x0124
#define ZY7_USB_USBCMD 0x0140
#define ZY7_USB_USBSTS 0x0144
#define ZY7_USB_USBINTR 0x0148
#define ZY7_USB_FRINDEX 0x014c
#define ZY7_USB_PERIODICLISTBASE_DEICEADDR 0x0154
#define ZY7_USB_ASYNCLISTADDR_ENDPOINTLISTADDR 0x0158
#define ZY7_USB_TTCTRL 0x015c
#define ZY7_USB_BURSTSIZE 0x0160
#define ZY7_USB_TXFILLTUNING 0x0164
#define ZY7_USB_TXFILLTUNING_TXFIFOTHRES_SHFT 16
#define ZY7_USB_TXFILLTUNING_TXFIFOTHRES_MASK (0x3f<<16)
#define ZY7_USB_TXTFILLTUNING 0x0168
#define ZY7_USB_IC_USB 0x016c
#define ZY7_USB_ULPI_VIEWPORT 0x0170
#define ZY7_USB_ULPI_VIEWPORT_WU (1<<31)
#define ZY7_USB_ULPI_VIEWPORT_RUN (1<<30)
#define ZY7_USB_ULPI_VIEWPORT_RW (1<<29)
#define ZY7_USB_ULPI_VIEWPORT_SS (1<<27)
#define ZY7_USB_ULPI_VIEWPORT_PORT_MASK (7<<24)
#define ZY7_USB_ULPI_VIEWPORT_PORT_SHIFT 24
#define ZY7_USB_ULPI_VIEWPORT_ADDR_MASK (0xff<<16)
#define ZY7_USB_ULPI_VIEWPORT_ADDR_SHIFT 16
#define ZY7_USB_ULPI_VIEWPORT_DATARD_MASK (0xff<<8)
#define ZY7_USB_ULPI_VIEWPORT_DATARD_SHIFT 8
#define ZY7_USB_ULPI_VIEWPORT_DATAWR_MASK (0xff<<0)
#define ZY7_USB_ULPI_VIEWPORT_DATAWR_SHIFT 0
#define ZY7_USB_ENDPTNAK 0x0178
#define ZY7_USB_ENDPTNAKEN 0x017c
#define ZY7_USB_CONFIGFLAG 0x0180
#define ZY7_USB_PORTSC(n) (0x0180+4*(n))
#define ZY7_USB_PORTSC_PTS_MASK (3<<30)
#define ZY7_USB_PORTSC_PTS_SHIFT 30
#define ZY7_USB_PORTSC_PTS_UTMI (0<<30)
#define ZY7_USB_PORTSC_PTS_ULPI (2<<30)
#define ZY7_USB_PORTSC_PTS_SERIAL (3<<30)
#define ZY7_USB_PORTSC_PTW (1<<28)
#define ZY7_USB_PORTSC_PTS2 (1<<25)
#define ZY7_USB_OTGSC 0x01a4
#define ZY7_USB_USBMODE 0x01a8
#define ZY7_USB_ENDPTSETUPSTAT 0x01ac
#define ZY7_USB_ENDPTPRIME 0x01b0
#define ZY7_USB_ENDPTFLUSH 0x01b4
#define ZY7_USB_ENDPTSTAT 0x01b8
#define ZY7_USB_ENDPTCOMPLETE 0x01bc
#define ZY7_USB_ENDPTCTRL(n) (0x01c0+4*(n))
#define EHCI_REG_OFFSET ZY7_USB_CAPLENGTH_HCIVERSION
#define EHCI_REG_SIZE 0x100
static void
zy7_ehci_post_reset(struct ehci_softc *ehci_softc)
{
uint32_t usbmode;
/* Force HOST mode */
usbmode = EOREAD4(ehci_softc, EHCI_USBMODE_NOLPM);
usbmode &= ~EHCI_UM_CM;
usbmode |= EHCI_UM_CM_HOST;
EOWRITE4(ehci_softc, EHCI_USBMODE_NOLPM, usbmode);
}
static int
zy7_phy_config(device_t dev, bus_space_tag_t io_tag, bus_space_handle_t bsh)
{
phandle_t node;
char buf[64];
uint32_t portsc;
int tries;
node = ofw_bus_get_node(dev);
if (OF_getprop(node, "phy_type", buf, sizeof(buf)) > 0) {
portsc = bus_space_read_4(io_tag, bsh, ZY7_USB_PORTSC(1));
portsc &= ~(ZY7_USB_PORTSC_PTS_MASK | ZY7_USB_PORTSC_PTW |
ZY7_USB_PORTSC_PTS2);
if (strcmp(buf,"ulpi") == 0)
portsc |= ZY7_USB_PORTSC_PTS_ULPI;
else if (strcmp(buf,"utmi") == 0)
portsc |= ZY7_USB_PORTSC_PTS_UTMI;
else if (strcmp(buf,"utmi-wide") == 0)
portsc |= (ZY7_USB_PORTSC_PTS_UTMI |
ZY7_USB_PORTSC_PTW);
else if (strcmp(buf, "serial") == 0)
portsc |= ZY7_USB_PORTSC_PTS_SERIAL;
bus_space_write_4(io_tag, bsh, ZY7_USB_PORTSC(1), portsc);
}
if (OF_getprop(node, "phy_vbus_ext", buf, sizeof(buf)) >= 0) {
/* Tell PHY that VBUS is supplied externally. */
bus_space_write_4(io_tag, bsh, ZY7_USB_ULPI_VIEWPORT,
ZY7_USB_ULPI_VIEWPORT_RUN |
ZY7_USB_ULPI_VIEWPORT_RW |
(0 << ZY7_USB_ULPI_VIEWPORT_PORT_SHIFT) |
(0x0b << ZY7_USB_ULPI_VIEWPORT_ADDR_SHIFT) |
(0x60 << ZY7_USB_ULPI_VIEWPORT_DATAWR_SHIFT)
);
tries = 100;
while ((bus_space_read_4(io_tag, bsh, ZY7_USB_ULPI_VIEWPORT) &
ZY7_USB_ULPI_VIEWPORT_RUN) != 0) {
if (--tries < 0)
return (-1);
DELAY(1);
}
}
return (0);
}
static int
zy7_ehci_probe(device_t dev)
{
if (!ofw_bus_status_okay(dev))
return (ENXIO);
if (!ofw_bus_is_compatible(dev, "xlnx,zy7_ehci"))
return (ENXIO);
device_set_desc(dev, "Zynq-7000 EHCI USB 2.0 controller");
return (0);
}
static int zy7_ehci_detach(device_t dev);
static int
zy7_ehci_attach(device_t dev)
{
ehci_softc_t *sc = device_get_softc(dev);
bus_space_handle_t bsh;
int err, rid;
/* initialize some bus fields */
sc->sc_bus.parent = dev;
sc->sc_bus.devices = sc->sc_devices;
sc->sc_bus.devices_max = EHCI_MAX_DEVICES;
sc->sc_bus.dma_bits = 32;
/* get all DMA memory */
if (usb_bus_mem_alloc_all(&sc->sc_bus,
USB_GET_DMA_TAG(dev), &ehci_iterate_hw_softc))
return (ENOMEM);
/* Allocate memory. */
rid = 0;
sc->sc_io_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
&rid, RF_ACTIVE);
if (sc->sc_io_res == NULL) {
device_printf(dev, "Can't allocate memory");
zy7_ehci_detach(dev);
return (ENOMEM);
}
sc->sc_io_tag = rman_get_bustag(sc->sc_io_res);
bsh = rman_get_bushandle(sc->sc_io_res);
sc->sc_io_size = EHCI_REG_SIZE;
if (bus_space_subregion(sc->sc_io_tag, bsh, EHCI_REG_OFFSET,
sc->sc_io_size, &sc->sc_io_hdl) != 0)
panic("%s: unable to subregion USB host registers",
device_get_name(dev));
/* Allocate IRQ. */
rid = 0;
sc->sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
RF_ACTIVE);
if (sc->sc_irq_res == NULL) {
device_printf(dev, "Can't allocate IRQ\n");
zy7_ehci_detach(dev);
return (ENOMEM);
}
/* Add USB device */
sc->sc_bus.bdev = device_add_child(dev, "usbus", -1);
if (!sc->sc_bus.bdev) {
device_printf(dev, "Could not add USB device\n");
zy7_ehci_detach(dev);
return (ENXIO);
}
device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus);
device_set_desc(sc->sc_bus.bdev, "Zynq-7000 ehci USB 2.0 controller");
strcpy(sc->sc_vendor, "Xilinx"); /* or IP vendor? */
/* Activate the interrupt */
err = bus_setup_intr(dev, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
NULL, (driver_intr_t *)ehci_interrupt, sc,
&sc->sc_intr_hdl);
if (err) {
device_printf(dev, "Cannot setup IRQ\n");
zy7_ehci_detach(dev);
return (err);
}
/* Customization. */
sc->sc_flags |= EHCI_SCFLG_TT | EHCI_SCFLG_NORESTERM;
sc->sc_vendor_post_reset = zy7_ehci_post_reset;
sc->sc_vendor_get_port_speed = ehci_get_port_speed_portsc;
/* Modify FIFO burst threshold from 2 to 8. */
bus_space_write_4(sc->sc_io_tag, bsh,
ZY7_USB_TXFILLTUNING,
8 << ZY7_USB_TXFILLTUNING_TXFIFOTHRES_SHFT);
/* Handle PHY options. */
if (zy7_phy_config(dev, sc->sc_io_tag, bsh) < 0) {
device_printf(dev, "Cannot config phy!\n");
zy7_ehci_detach(dev);
return (EIO);
}
/* Init ehci. */
err = ehci_init(sc);
if (!err) {
sc->sc_flags |= EHCI_SCFLG_DONEINIT;
err = device_probe_and_attach(sc->sc_bus.bdev);
}
if (err) {
device_printf(dev, "USB init failed err=%d\n", err);
zy7_ehci_detach(dev);
return (err);
}
return (0);
}
static int
zy7_ehci_detach(device_t dev)
{
ehci_softc_t *sc = device_get_softc(dev);
/* during module unload there are lots of children leftover */
device_delete_children(dev);
sc->sc_flags &= ~EHCI_SCFLG_DONEINIT;
if (sc->sc_irq_res && sc->sc_intr_hdl)
/* call ehci_detach() after ehci_init() called after
* successful bus_setup_intr().
*/
ehci_detach(sc);
if (sc->sc_irq_res) {
if (sc->sc_intr_hdl != NULL)
bus_teardown_intr(dev, sc->sc_irq_res,
sc->sc_intr_hdl);
bus_release_resource(dev, SYS_RES_IRQ,
rman_get_rid(sc->sc_irq_res), sc->sc_irq_res);
}
if (sc->sc_io_res)
bus_release_resource(dev, SYS_RES_MEMORY,
rman_get_rid(sc->sc_io_res), sc->sc_io_res);
usb_bus_mem_free_all(&sc->sc_bus, &ehci_iterate_hw_softc);
return (0);
}
static device_method_t ehci_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, zy7_ehci_probe),
DEVMETHOD(device_attach, zy7_ehci_attach),
DEVMETHOD(device_detach, zy7_ehci_detach),
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, bus_generic_resume),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
/* Bus interface */
DEVMETHOD(bus_print_child, bus_generic_print_child),
DEVMETHOD_END
};
static driver_t ehci_driver = {
"ehci",
ehci_methods,
sizeof(struct ehci_softc),
};
static devclass_t ehci_devclass;
DRIVER_MODULE(ehci, simplebus, ehci_driver, ehci_devclass, NULL, NULL);
MODULE_DEPEND(ehci, usb, 1, 1, 1);