freebsd-dev/sys/dev/idt/idt_harp.c
Matthew N. Dodd 370f7f7c05 - Deal with netisr changes.
- Wrap idt_atm_harpconn() in conditional define T_ATM_BUFQUEUE
2003-03-29 15:55:04 +00:00

767 lines
19 KiB
C

/*
* Copyright (c) 2000, 2001 Richard Hodges and Matriplex, inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Matriplex, inc.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*
* This driver is derived from the Nicstar driver by Mark Tinguely, and
* some of the original driver still exists here. Those portions are...
* Copyright (c) 1996, 1997, 1998, 1999 Mark Tinguely
* All rights reserved.
*
******************************************************************************
*
* $FreeBSD$
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/syslog.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/module.h>
#include <machine/bus_memio.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <net/netisr.h>
#include <net/if_var.h>
#include <netatm/port.h>
#include <netatm/queue.h>
#include <netatm/atm.h>
#include <netatm/atm_sys.h>
#include <netatm/atm_sap.h>
#include <netatm/atm_cm.h>
#include <netatm/atm_if.h>
#include <netatm/atm_stack.h>
#include <netatm/atm_pcb.h>
#include <netatm/atm_var.h>
#include <netatm/atm_vc.h>
#include <dev/idt/idtreg.h>
#include <dev/idt/idtvar.h>
/******************************************************************************
*
* HARP-specific definitions
*
*/
#define IDT_DEV_NAME "idt"
#define IDT_IFF_MTU 9188
#define IDT_MAX_VCI 1023 /* 0 - 1023 */
#define IDT_MAX_VPI 0
#define iv_next iv_cmn.cv_next
#define iv_toku iv_cmn.cv_toku
#define iv_upper iv_cmn.cv_upper
#define iv_vccb iv_cmn.cv_connvc /* HARP 3.0 */
#define iv_state iv_cmn.cv_state
#define iu_pif iu_cmn.cu_pif
#define iu_unit iu_cmn.cu_unit
#define iu_flags iu_cmn.cu_flags
#define iu_mtu iu_cmn.cu_mtu
#define iu_open_vcc iu_cmn.cu_open_vcc
#define iu_instvcc iu_cmn.cu_instvcc /* HARP 3.0 */
#define iu_vcc iu_cmn.cu_vcc
#define iu_vcc_zone iu_cmn.cu_vcc_zone
#define iu_nif_zone iu_cmn.cu_nif_zone
#define iu_ioctl iu_cmn.cu_ioctl
#define iu_openvcc iu_cmn.cu_openvcc
#define iu_closevcc iu_cmn.cu_closevcc
#define iu_output iu_cmn.cu_output
#define iu_config iu_cmn.cu_config
#define iu_softc iu_cmn.cu_softc
/*
* ATM Interface services
*/
static struct stack_defn idt_svaal5 = {
NULL,
SAP_CPCS_AAL5,
SDF_TERM,
atm_dev_inst,
atm_dev_lower,
NULL,
0,
};
static struct stack_defn idt_svaal4 = {
&idt_svaal5,
SAP_CPCS_AAL3_4,
SDF_TERM,
atm_dev_inst,
atm_dev_lower,
NULL,
0,
};
static struct stack_defn idt_svaal0 = {
&idt_svaal4,
SAP_ATM,
SDF_TERM,
atm_dev_inst,
atm_dev_lower,
NULL,
0,
};
struct stack_defn *idt_services = &idt_svaal0;
extern uma_zone_t idt_nif_zone;
extern uma_zone_t idt_vcc_zone;
static int idt_atm_bearerclass(struct attr_bearer *);
#ifdef T_ATM_BUFQUEUE
static CONNECTION *idt_atm_harpconn(Cmn_unit *, Cmn_vcc *);
#endif
static int idt_atm_ioctl(int, caddr_t, caddr_t);
static void idt_output(Cmn_unit *, Cmn_vcc *, KBuffer *);
static int idt_openvcc(Cmn_unit *, Cmn_vcc *);
static int idt_closevcc(Cmn_unit *, Cmn_vcc *);
static int idt_instvcc(Cmn_unit *, Cmn_vcc *);
static void idt_recv_stack(void *, KBuffer *);
/******************************************************************************
*
* HARP GLUE SECTION
*
******************************************************************************
*
* Handle netatm core service interface ioctl requests
*
* Called at splnet.
*
* Arguments:
* code ioctl function (sub)code
* data data to/from ioctl
* arg optional code-specific argument
*
* Returns:
* 0 request processed successfully
* error request failed - reason code
*
*/
static int
idt_atm_ioctl(int code, caddr_t addr, caddr_t arg)
{
#ifdef T_ATM_BUFQUEUE
CONNECTION *connection;
TX_QUEUE *txq;
struct mbuf *m;
Cmn_unit *cup;
Cmn_vcc *cvp;
int retval;
#endif
switch (code) {
#ifdef T_ATM_BUFQUEUE
case T_ATM_BUFQUEUE:
cup = (Cmn_unit *) addr;
cvp = (Cmn_vcc *) arg;
connection = idt_atm_harpconn(cup, cvp);
if (connection == NULL)
return (-1);
retval = 0;
txq = connection->queue;
if (txq == NULL)
return (-1);
for (m = txq->mget; m != NULL; m = m->m_nextpkt)
retval += m->m_pkthdr.len;
return (retval);
#endif
}
return (ENOSYS);
}
#ifdef T_ATM_BUFQUEUE
/*******************************************************************************
*
* Get connection pointer from Cmn_unit and Cmn_vcc
*
* in: Cmn_unit and Cmn_vcc
* out: connection (NULL=error)
*
* Date first: 05/31/2001 last: 05/31/2001
*/
static CONNECTION *
idt_atm_harpconn(Cmn_unit * cup, Cmn_vcc * cvp)
{
struct vccb *vccinf; /* from HARP struct */
IDT *idt;
int vpi;
int vci;
idt = (IDT *) cup;
if (idt == NULL || cvp == NULL)
return (NULL);
if (cvp->cv_connvc == NULL)
return (NULL);
vccinf = cvp->cv_connvc->cvc_vcc;
if (vccinf == NULL)
return (NULL);
vpi = vccinf->vc_vpi;
vci = vccinf->vc_vci;
return (idt_connect_find(idt, vpi, vci));
}
#endif /* T_ATM_BUFQUEUE */
/*******************************************************************************
*
* Get CBR/VBR/UBR class from bearer attribute
*
* in:
* out: NICCBR/NICVBR/NICABR/NICUBR
*
* Date first: 06/12/2001 last: 06/13/2001
*/
static int
idt_atm_bearerclass(struct attr_bearer * bearer)
{
switch (bearer->v.bearer_class) {
case T_ATM_CLASS_A:return (NICCBR);
case T_ATM_CLASS_C:
if (idt_sysctl_vbriscbr)
return (NICCBR); /* use CBR slots for VBR VC's */
else
return (NICVBR);
case T_ATM_CLASS_X:
if (bearer->v.traffic_type == T_ATM_CBR)
return (NICCBR);
if (bearer->v.traffic_type == T_ATM_VBR)
return (NICVBR);
return (NICUBR);
}
return (NICUBR);
}
/* The flag idt_sysctl_vbriscbr allows us to set up a CBR VC as if it were
* VBR. This is primarily to avoid cell loss at a switch that cannot seem
* to buffer one or two cells of jitter. This jitter is created when many
* CBR slots have been taken, and a new CBR VC cannot use the optimally
* spaced slots, and has to use nearby slots instead.
*
* In this case, we want to use the VC SCR as the CBR value. The PCR and MBS
* is only of interest to the switch.
*
*******************************************************************************
*
* Initialize HARP service
* called from device attach
*/
int
idt_harp_init(nicstar_reg_t *idt)
{
long long tsc_val;
u_char idt_mac[6];
int i;
int error;
error = 0;
/*
* Start initializing it
*/
idt->iu_unit = device_get_unit(idt->dev);
idt->iu_mtu = IDT_IFF_MTU;
idt->iu_ioctl = idt_atm_ioctl;
idt->iu_openvcc = idt_openvcc;
idt->iu_instvcc = idt_instvcc;
idt->iu_closevcc = idt_closevcc;
idt->iu_output = idt_output;
idt->iu_vcc_zone = idt_vcc_zone;
idt->iu_nif_zone = idt_nif_zone;
idt->iu_softc = (void *)idt;
/*
* Copy serial number into config space
*/
idt->iu_config.ac_serial = 0;
idt->iu_config.ac_vendor = VENDOR_IDT;
idt->iu_config.ac_vendapi = VENDAPI_IDT_1;
idt->iu_config.ac_device = DEV_IDT_155;
idt->iu_config.ac_media = MEDIA_UNKNOWN;
idt->iu_config.ac_bustype = BUS_PCI;
idt->iu_pif.pif_pcr = idt->cellrate_rmax; /* ATM_PCR_OC3C; */
idt->iu_pif.pif_maxvpi = idt->conn_maxvpi;
idt->iu_pif.pif_maxvci = idt->conn_maxvci;
snprintf(idt->iu_config.ac_hard_vers,
sizeof(idt->iu_config.ac_hard_vers),
idt->hardware);
snprintf(idt->iu_config.ac_firm_vers,
sizeof(idt->iu_config.ac_firm_vers),
IDT_VERSION);
/*
* Save device ram info for user-level programs NOTE: This really
* points to start of EEPROM and includes all the device registers
* in the lower 2 Megabytes.
*/
idt->iu_config.ac_ram = NULL;
idt->iu_config.ac_ramsize = 0;
for (i = 0; i < 6; i++) {
idt_mac[i] = nicstar_eeprom_rd(idt, (0x6c + i));
}
/* looks like bad MAC */
if ((idt_mac[3] | idt_mac[4] | idt_mac[5]) == 0) {
GET_RDTSC(tsc_val); /* 24 bits on 500mhz CPU is about
* 30msec */
idt_mac[0] = 0x00;
idt_mac[1] = 0x20;
idt_mac[2] = 0x48; /* use Fore prefix */
idt_mac[3] = (tsc_val >> 16) & 0xff;
idt_mac[4] = (tsc_val >> 8) & 0xff;
idt_mac[5] = (tsc_val) & 0xff;
device_printf(idt->dev,
"Cannot read MAC address from EEPROM, generating it.\n");
}
bcopy(&idt_mac, &idt->iu_pif.pif_macaddr.ma_data, sizeof(idt_mac));
device_printf(idt->dev, "MAC address %6D, HWrev=%d\n",
(u_int8_t *)&idt->iu_pif.pif_macaddr.ma_data, ":",
idt->pci_rev);
idt->iu_config.ac_macaddr = idt->iu_pif.pif_macaddr;
/*
* Register this interface with ATM core services
*/
error = atm_physif_register(&idt->iu_cmn, IDT_DEV_NAME, idt_services);
if (error != 0) {
/*
* Registration failed - back everything out
*/
log(LOG_ERR, "%s(): atm_physif_register failed\n", __func__);
return (error);
}
idt->iu_flags |= CUF_INITED;
#if BSD >= 199506
/*
* Add hook to out shutdown function at_shutdown (
* (bootlist_fn)idt_pci_shutdown, idt, SHUTDOWN_POST_SYNC );
*/
#endif
return (error);
}
/*******************************************************************************
*
* Output data
*/
static void
idt_output(Cmn_unit * cmnunit, Cmn_vcc * cmnvcc, KBuffer * m)
{
struct vccb *vccinf; /* from HARP struct */
IDT *idt;
int vpi;
int vci;
int flags;
idt = (IDT *) cmnunit;
flags = 0;
if (cmnvcc == NULL) {
device_printf(idt->dev, "idt_output arg error #1\n");
goto bad;
}
if (cmnvcc->cv_connvc == NULL) {
device_printf(idt->dev, "idt_output arg error #2\n");
goto bad;
}
vccinf = cmnvcc->cv_connvc->cvc_vcc;
if (vccinf == NULL) {
device_printf(idt->dev, "idt_output arg error #3\n");
goto bad;
}
vpi = vccinf->vc_vpi;
vci = vccinf->vc_vci;
#ifdef CVF_MPEG2TS /* option to split bufs into small TS bufs */
if (cmnvcc->cv_flags & CVF_MPEG2TS)
flags = 1;
#endif
idt_transmit(idt, m, vpi, vci, flags);
return;
bad:
m_freem(m);
return;
}
/*******************************************************************************
*
* Open VCC
*/
static int
idt_openvcc(Cmn_unit * cmnunit, Cmn_vcc * cmnvcc)
{
Atm_attributes *attrib; /* from HARP struct */
struct vccb *vccinf; /* from HARP struct */
CONNECTION *connection;
IDT *idt;
int vpi;
int vci;
int class; /* NICCBR, NICVBR, or NICUBR */
idt = (IDT *) cmnunit;
if (cmnvcc == NULL || cmnvcc->cv_connvc == NULL) {
printf("idt_openvcc: bad request #1.\n");
return (1);
}
attrib = &cmnvcc->cv_connvc->cvc_attr;
vccinf = cmnvcc->cv_connvc->cvc_vcc;
if (attrib == NULL || vccinf == NULL) {
printf("idt_openvcc: bad request #2.\n");
return (1);
}
vpi = vccinf->vc_vpi;
vci = vccinf->vc_vci;
connection = idt_connect_find(idt, vpi, vci);
if (connection == NULL) {
printf("idt_openvcc: vpi/vci invalid: %d/%d\n", vpi, vci);
return (1);
}
if (connection->status) {
printf("idt_openvcc: connection already open %d/%d\n", vpi, vci);
return (1);
}
connection->status = 1;
connection->recv = NULL;
connection->rlen = 0;
connection->maxpdu = 20000;
connection->aal = IDTAAL5;
connection->traf_pcr = attrib->traffic.v.forward.PCR_all_traffic;
connection->traf_scr = attrib->traffic.v.forward.SCR_all_traffic;
connection->vccinf = vccinf; /* 12/15/2000 */
if (connection->traf_pcr <= 0)
connection->traf_pcr = connection->traf_scr;
if (connection->traf_scr <= 0)
connection->traf_scr = connection->traf_pcr;
class = idt_atm_bearerclass(&attrib->bearer);
if (vpi == 0 && vci == 5)
class = NICABR; /* higher priority than UBR */
if (vpi == 0 && vci == 16)
class = NICABR;
if (connection->traf_pcr < 0) { /* neither PCR nor SCR given */
connection->traf_pcr = 1;
connection->traf_scr = 1;
class = NICUBR; /* so give it lowest priority */
}
connection->class = class;
if (idt_connect_txopen(idt, connection)) {
device_printf(idt->dev, "cannot open connection for %d/%d\n",
vpi, vci);
return (1);
}
if (idt_sysctl_logvcs)
printf("idt_openvcc: %d/%d, PCR=%d, SCR=%d\n", vpi, vci,
connection->traf_pcr, connection->traf_scr);
idt_connect_opencls(idt, connection, 1); /* open entry in rcv
* connect table */
return (0);
}
/* We really don't handle ABR, but use it as a higher priority UBR. The
* idea is that a UBR connection that gives a PCR (like 0/16) should
* be given preference over a UBR connection that wants "everything else".
*
* Note that CLASS_X is typically UBR, but the traffic type information
* element may still specify CBR or VBR.
*
*******************************************************************************
*
* Close VCC
*/
static int
idt_closevcc(Cmn_unit * cmnunit, Cmn_vcc * cmnvcc)
{
CONNECTION *connection;
nicstar_reg_t *idt = (nicstar_reg_t *) cmnunit;
int vpi;
int vci;
if (cmnvcc && cmnvcc->cv_connvc && cmnvcc->cv_connvc->cvc_vcc) {
vpi = cmnvcc->cv_connvc->cvc_vcc->vc_vpi;
vci = cmnvcc->cv_connvc->cvc_vcc->vc_vci;
} else {
printf("idt_closevcc: bad vcivpi\n");
return (0);
}
connection = idt_connect_find(idt, vpi, vci);
if (connection == NULL) {
printf("idt_closevcc: vpi/vci invalid: %d/%d\n", vpi, vci);
return (0);
}
idt_connect_opencls(idt, connection, 0); /* close entry in rcv
* connect table */
if (connection->status == 0)
printf("idt_closevcc: close on empty connection %d/%d\n", vpi, vci);
if (connection->recv != NULL)
m_freem(connection->recv); /* recycle mbuf of partial PDU */
idt_connect_txclose(idt, connection);
connection->status = 0;
connection->recv = NULL;
connection->rlen = 0;
connection->maxpdu = 0;
connection->aal = 0;
connection->traf_pcr = 0;
connection->traf_scr = 0;
if (idt_sysctl_logvcs)
printf("idt_closevcc: vpi=%d vci=%d\n", vpi, vci);
return (0);
}
/*
*
* VCC Stack Instantiation
*
* This function is called via the common driver code during a device VCC
* stack instantiation. The common code has already validated some of
* the request so we just need to check a few more IDT-specific details.
*
* Called at splnet.
*
* Arguments:
* cup pointer to device common unit
* cvp pointer to common VCC entry
*
* Returns:
* 0 instantiation successful
* err instantiation failed - reason indicated
*
*/
static int
idt_instvcc(Cmn_unit * cmnunit, Cmn_vcc * cmnvcc)
{
Atm_attributes *attrib; /* from HARP struct */
IDT *idt;
int class, pcr, scr;
int slots_vc, slots_cur, slots_max;
if (cmnvcc == NULL)
return (EINVAL);
if (cmnvcc->cv_connvc == NULL)
return (EINVAL);
idt = (IDT *) cmnunit;
if (idt == NULL)
return (EINVAL);
attrib = &cmnvcc->cv_connvc->cvc_attr;
if (attrib == NULL)
return (EINVAL);
pcr = attrib->traffic.v.forward.PCR_all_traffic;
scr = attrib->traffic.v.forward.SCR_all_traffic;
if (pcr <= 0)
pcr = scr; /* if PCR missing, default to SCR */
if (pcr <= 0)
pcr = 1;
if (scr <= 0)
scr = pcr;
class = idt_atm_bearerclass(&attrib->bearer);
if (class == NICCBR) {
slots_max = idt->txslots_max;
slots_cur = idt->txslots_cur;
slots_vc = idt_slots_cbr(idt, scr); /* 06/13/2001: now using
* SCR */
if (slots_vc + slots_cur > slots_max) {
if (idt_sysctl_logvcs)
device_printf(idt->dev,
"Insufficient bandwidth (vc=%d cur=%d max=%d)\n",
slots_vc, slots_cur, slots_max);
return (EINVAL);
}
}
/* This part was take from /sys/dev/hfa/fore_vcm.c */
switch (attrib->aal.type) {
case ATM_AAL0:
break;
case ATM_AAL3_4:
if ((attrib->aal.v.aal4.forward_max_SDU_size > IDT_IFF_MTU) ||
(attrib->aal.v.aal4.backward_max_SDU_size > IDT_IFF_MTU))
return (EINVAL);
break;
case ATM_AAL5:
if ((attrib->aal.v.aal5.forward_max_SDU_size > IDT_IFF_MTU) ||
(attrib->aal.v.aal5.backward_max_SDU_size > IDT_IFF_MTU))
return (EINVAL);
break;
default:
return (EINVAL);
}
return (0);
}
/*
* Pass Incoming PDU up Stack
*
* This function is called via the core ATM interrupt queue callback
* set in fore_recv_drain(). It will pass the supplied incoming
* PDU up the incoming VCC's stack.
*
* Called at splnet.
*
* Arguments:
* tok token to identify stack instantiation
* m pointer to incoming PDU buffer chain
*
* Returns:
* none
*/
static void
idt_recv_stack(void *tok, KBuffer * m)
{
Idt_vcc *ivp = (Idt_vcc *) tok;
int err;
if ((m->m_flags & M_PKTHDR) == 0) {
printf("idt_recv_stack: Warning - mbuf chain has no header.\n");
KB_FREEALL(m);
return;
}
/*
* Send the data up the stack
*/
STACK_CALL(CPCS_UNITDATA_SIG, ivp->iv_upper,
ivp->iv_toku, ivp->iv_vccb, (int)m, 0, err);
if (err)
KB_FREEALL(m);
return;
}
/******************************************************************************
*
* Enqueue received PDU for HARP to handle
*
* in: IDT device, mbuf, vpi, vci
*
* Date last: 12/14/2000
*/
void
idt_receive(nicstar_reg_t * idt, struct mbuf * m, int vpi, int vci)
{
caddr_t cp;
Cmn_vcc *vcc;
int space;
/*
* The STACK_CALL needs to happen at splnet() in order for the stack
* sequence processing to work. Schedule an interrupt queue
* callback at splnet() since we are currently at device level.
*/
/*
* Prepend callback function pointer and token value to buffer. We
* have already guaranteed that the space is available in the first
* buffer.
*/
/*
* vcc = atm_dev_vcc_find(&idt->iu_cmn, (vpivci>> 16), vpivci &
* 0xffff, VCC_IN);
*/
vcc = atm_dev_vcc_find(&idt->iu_cmn, vpi, vci, VCC_IN);
if (vcc == NULL) { /* harp stack not ready or no vcc */
printf("idt_receive: no VCC %d/%d\n", vpi, vci);
KB_FREEALL(m);
return;
}
space = m->m_data - idt_mbuf_base(m);
if (space < sizeof(atm_intr_func_t) + sizeof(int)) {
printf("idt_receive: NOT enough buffer space (%d).\n", space);
KB_FREEALL(m);
return;
}
KB_HEADADJ(m, sizeof(atm_intr_func_t) + sizeof(int));
KB_DATASTART(m, cp, caddr_t);
*((atm_intr_func_t *) cp) = idt_recv_stack;
cp += sizeof(atm_intr_func_t);
*((void **)cp) = (void *)vcc;
/*
* Schedule callback
*/
if (! netisr_queue(NETISR_ATM, m))
KB_FREEALL(m);
}