freebsd-dev/sys/i386/eisa/3c5x9.c
Matthew N. Dodd 0d6ab4a16a Move the specification of EDGE/LEVEL triggered interrupts to
eisa_add_intr() which now takes an additional arguement (one of
EISA_TRIGGER_LEVEL or EISA_TRIGGER_EDGE).

The flag RR_SHAREABLE has no effect when passed to
bus_alloc_resource(dev, SYS_RES_IRQ, ...) in an EISA device context as
the eisa_alloc_resource() call (bus_alloc_resource method) now deals
with this flag directly, depending on the device ivars.

This change does nothing more than move all the 'shared = inb(foo + iobsse)'
nonesense to the device probe methods rather than the device attach.

Also, print out 'edge' or 'level' in the IRQ announcement message.

Reviewed by: dfr
1999-08-01 22:57:09 +00:00

310 lines
7.2 KiB
C

/*
* Product specific probe and attach routines for:
* 3COM 3C579 and 3C509(in eisa config mode) ethernet controllers
*
* Copyright (c) 1996 Justin T. Gibbs
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice immediately at the beginning of the file, without modification,
* this list of conditions, and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Absolutely no warranty of function or purpose is made by the author
* Justin T. Gibbs.
* 4. Modifications may be freely made to this file if the above conditions
* are met.
*
* $Id: 3c5x9.c,v 1.12 1999/05/08 21:59:15 dfr Exp $
*/
#include "eisa.h"
#if NEISA > 0
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <machine/clock.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <net/if.h>
#include <netinet/in.h>
#include <netinet/if_ether.h>
#include <i386/isa/if_epreg.h>
#include <i386/eisa/eisaconf.h>
#define EISA_DEVICE_ID_3COM_3C509_TP 0x506d5090
#define EISA_DEVICE_ID_3COM_3C509_BNC 0x506d5091
#define EISA_DEVICE_ID_3COM_3C579_TP 0x506d5092
#define EISA_DEVICE_ID_3COM_3C579_BNC 0x506d5093
#define EISA_DEVICE_ID_3COM_3C509_COMBO 0x506d5094
#define EISA_DEVICE_ID_3COM_3C509_TPO 0x506d5095
#define EP_EISA_SLOT_OFFSET 0x0c80
#define EP_EISA_IOSIZE 0x000a
#define EISA_IOCONF 0x0008
#define IRQ_CHANNEL 0xf000
#define INT_3 0x3000
#define INT_5 0x5000
#define INT_7 0x7000
#define INT_9 0x9000
#define INT_10 0xa000
#define INT_11 0xb000
#define INT_12 0xc000
#define INT_15 0xf000
#define EISA_BPROM_MEDIA_CONF 0x0006
#define TRANS_TYPE 0xc000
#define TRANS_TP 0x0000
#define TRANS_AUI 0x4000
#define TRANS_BNC 0xc000
static const char *ep_match __P((eisa_id_t type));
static const char*
ep_match(eisa_id_t type)
{
switch(type) {
case EISA_DEVICE_ID_3COM_3C509_TP:
return "3Com 3C509-TP Network Adapter";
break;
case EISA_DEVICE_ID_3COM_3C509_BNC:
return "3Com 3C509-BNC Network Adapter";
break;
case EISA_DEVICE_ID_3COM_3C579_TP:
return "3Com 3C579-TP EISA Network Adapter";
break;
case EISA_DEVICE_ID_3COM_3C579_BNC:
return "3Com 3C579-BNC EISA Network Adapter";
break;
case EISA_DEVICE_ID_3COM_3C509_COMBO:
return "3Com 3C509-Combo Network Adapter";
break;
case EISA_DEVICE_ID_3COM_3C509_TPO:
return "3Com 3C509-TPO Network Adapter";
break;
default:
break;
}
return (NULL);
}
static int
ep_eisa_probe(device_t dev)
{
const char *desc;
u_long iobase;
u_short conf;
u_long port;
int irq;
desc = ep_match(eisa_get_id(dev));
if (!desc)
return (ENXIO);
device_set_desc(dev, desc);
port = (eisa_get_slot(dev) * EISA_SLOT_SIZE);
iobase = port + EP_EISA_SLOT_OFFSET;
/* We must be in EISA configuration mode */
if ((inw(iobase + EP_W0_ADDRESS_CFG) & 0x1f) != 0x1f)
return ENXIO;
eisa_add_iospace(dev, iobase, EP_EISA_IOSIZE, RESVADDR_NONE);
eisa_add_iospace(dev, port, EP_IOSIZE, RESVADDR_NONE);
conf = inw(iobase + EISA_IOCONF);
/* Determine our IRQ */
switch (conf & IRQ_CHANNEL) {
case INT_3:
irq = 3;
break;
case INT_5:
irq = 5;
break;
case INT_7:
irq = 7;
break;
case INT_9:
irq = 9;
break;
case INT_10:
irq = 10;
break;
case INT_11:
irq = 11;
break;
case INT_12:
irq = 12;
break;
case INT_15:
irq = 15;
break;
default:
/* Disabled */
printf("ep: 3COM Network Adapter at "
"slot %d has its IRQ disabled. "
"Probe failed.\n",
eisa_get_slot(dev));
return ENXIO;
}
eisa_add_intr(dev, irq, EISA_TRIGGER_EDGE);
return 0;
}
static int
ep_eisa_attach(device_t dev)
{
struct ep_softc *sc;
struct ep_board *epb;
struct resource *io = 0;
struct resource *eisa_io = 0;
struct resource *irq = 0;
int unit = device_get_unit(dev);
u_char level_intr;
int i, rid, shared;
void *ih;
/*
* The addresses are sorted in increasing order
* so we know the port to pass to the core ep
* driver comes first.
*/
rid = 0;
io = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid,
0, ~0, 1, RF_ACTIVE);
if (!io) {
device_printf(dev, "No I/O space?!\n");
goto bad;
}
rid = 1;
eisa_io = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid,
0, ~0, 1, RF_ACTIVE);
if (!eisa_io) {
device_printf(dev, "No I/O space?!\n");
goto bad;
}
epb = &ep_board[ep_boards];
epb->epb_addr = rman_get_start(io);
epb->epb_used = 1;
if(!(sc = ep_alloc(unit, epb)))
goto bad;
ep_boards++;
sc->stat = 0;
level_intr = FALSE;
switch(eisa_get_id(dev)) {
case EISA_DEVICE_ID_3COM_3C509_TP:
sc->ep_connectors = UTP|AUI;
break;
case EISA_DEVICE_ID_3COM_3C509_BNC:
sc->ep_connectors = BNC|AUI;
break;
case EISA_DEVICE_ID_3COM_3C579_TP:
sc->ep_connectors = UTP|AUI;
sc->stat = F_ACCESS_32_BITS;
level_intr = TRUE;
break;
case EISA_DEVICE_ID_3COM_3C579_BNC:
sc->ep_connectors = BNC|AUI;
sc->stat = F_ACCESS_32_BITS;
level_intr = TRUE;
break;
case EISA_DEVICE_ID_3COM_3C509_COMBO:
sc->ep_connectors = UTP|BNC|AUI;
break;
case EISA_DEVICE_ID_3COM_3C509_TPO:
sc->ep_connectors = UTP;
break;
default:
break;
}
/*
* Set the eisa config selected media type
*/
sc->ep_connector = inw(rman_get_start(eisa_io) + EISA_BPROM_MEDIA_CONF)
>> ACF_CONNECTOR_BITS;
shared = level_intr ? RF_SHAREABLE : 0;
rid = 0;
irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid,
0, ~0, 1, shared | RF_ACTIVE);
if (!irq) {
device_printf(dev, "No irq?!\n");
goto bad;
}
/* Reset and Enable the card */
outb(rman_get_start(eisa_io) + EP_W0_CONFIG_CTRL, W0_P4_CMD_RESET_ADAPTER);
DELAY(1000); /* we must wait at least 1 ms */
outb(rman_get_start(eisa_io) + EP_W0_CONFIG_CTRL, W0_P4_CMD_ENABLE_ADAPTER);
/* Now the registers are availible through the lower ioport */
/*
* Retrieve our ethernet address
*/
GO_WINDOW(0);
for(i = 0; i < 3; i++)
sc->epb->eth_addr[i] = get_e(sc, i);
/* Even we get irq number from board, we should tell him..
Otherwise we never get a H/W interrupt anymore...*/
if ( rman_get_start(irq) == 9 )
rman_get_start(irq) = 2;
SET_IRQ(rman_get_start(eisa_io), rman_get_start(irq));
ep_attach(sc);
bus_setup_intr(dev, irq, INTR_TYPE_NET, ep_intr, sc, &ih);
return 0;
bad:
if (io)
bus_release_resource(dev, SYS_RES_IOPORT, 0, io);
if (eisa_io)
bus_release_resource(dev, SYS_RES_IOPORT, 0, eisa_io);
if (irq)
bus_release_resource(dev, SYS_RES_IRQ, 0, irq);
return -1;
}
static device_method_t ep_eisa_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, ep_eisa_probe),
DEVMETHOD(device_attach, ep_eisa_attach),
{ 0, 0 }
};
static driver_t ep_eisa_driver = {
"ep",
ep_eisa_methods,
1, /* unused */
};
static devclass_t ep_devclass;
DRIVER_MODULE(ep, eisa, ep_eisa_driver, ep_devclass, 0, 0);
#endif /* NEISA > 0 */