e09f49b6fa
problem. o Create new timeout routine so we don't detach the card inside a ISR but instead drop back to spl0 via a timeout of 0. o Actually delete the child of the pccard device rather than just faking it badly. o Fix sio, ed and ep to have pccard detach routines that are int rather than void. o Fix ep and ed pccard detach routines to use if_detach rather than just if_down. if_detach destroys the device, while if_down just marks it down. In this incarnation of the pccard things, we map the disable the slot action to detach the driver, which removes the driver from the device tree. When that is done, a panic would soon follow as the ifconfig tried to down the device. Didn't fix: o Should cache the pccard dev child's pointer in struct slot o remove now unused parts of struct slot o Any driver using softc after detach has been called. sio's softc used to be statically allocated, so you could check sc->gone, but that is now gone. o Didn't remove gone from softc of drivers that use the old pccard method. Didn't test: o ed driver changes o sio driver changes on pccards o suspend (no laptop or apm support on my desktop)
768 lines
19 KiB
C
768 lines
19 KiB
C
/*
|
|
* pccard.c - Interface code for PC-CARD controllers.
|
|
*
|
|
* June 1995, Andrew McRae (andrew@mega.com.au)
|
|
*-------------------------------------------------------------------------
|
|
*
|
|
* Copyright (c) 1995 Andrew McRae. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include "opt_pcic.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/select.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/module.h>
|
|
#include <sys/uio.h>
|
|
#include <sys/poll.h>
|
|
#include <sys/bus.h>
|
|
#include <machine/bus.h>
|
|
|
|
#include <i386/isa/isa_device.h>
|
|
#include <i386/isa/icu.h>
|
|
#include <i386/isa/intr_machdep.h>
|
|
|
|
#include "apm.h"
|
|
#if NAPM > 0
|
|
#include <machine/apm_bios.h>
|
|
#endif /* NAPM > 0 */
|
|
|
|
#include <pccard/cardinfo.h>
|
|
#include <pccard/driver.h>
|
|
#include <pccard/pcic.h>
|
|
#include <pccard/slot.h>
|
|
#include <pccard/pccard_nbk.h>
|
|
|
|
#include <machine/md_var.h>
|
|
|
|
/*
|
|
* XXX We shouldn't be using processor-specific/bus-specific code in
|
|
* here, but we need the start of the ISA hole (IOM_BEGIN).
|
|
*/
|
|
#ifdef PC98
|
|
#include <pc98/pc98/pc98.h>
|
|
#else
|
|
#include <i386/isa/isa.h>
|
|
#endif
|
|
|
|
SYSCTL_NODE(_machdep, OID_AUTO, pccard, CTLFLAG_RW, 0, "pccard");
|
|
|
|
static int pcic_resume_reset =
|
|
#ifdef PCIC_RESUME_RESET /* opt_pcic.h */
|
|
1;
|
|
#else
|
|
0;
|
|
#endif
|
|
|
|
SYSCTL_INT(_machdep_pccard, OID_AUTO, pcic_resume_reset, CTLFLAG_RW,
|
|
&pcic_resume_reset, 0, "");
|
|
|
|
#define PCCARD_MEMSIZE (4*1024)
|
|
|
|
#define MIN(a,b) ((a)<(b)?(a):(b))
|
|
|
|
static int allocate_driver(struct slot *, struct dev_desc *);
|
|
static void inserted(void *);
|
|
static void disable_slot(struct slot *);
|
|
static void disable_slot_spl0(struct slot *);
|
|
static void disable_slot_to(void *);
|
|
static int invalid_io_memory(unsigned long, int);
|
|
static void power_off_slot(void *);
|
|
|
|
#if NAPM > 0
|
|
/*
|
|
* For the APM stuff, the apmhook structure is kept
|
|
* separate from the slot structure so that the slot
|
|
* drivers do not need to know about the hooks (or the
|
|
* data structures).
|
|
*/
|
|
static int slot_suspend(void *arg);
|
|
static int slot_resume(void *arg);
|
|
static struct apmhook s_hook[MAXSLOT]; /* APM suspend */
|
|
static struct apmhook r_hook[MAXSLOT]; /* APM resume */
|
|
#endif /* NAPM > 0 */
|
|
|
|
static struct slot *pccard_slots[MAXSLOT]; /* slot entries */
|
|
static struct slot *slot_list;
|
|
static struct slot_ctrl *cont_list;
|
|
|
|
/*
|
|
* The driver interface for read/write uses a block
|
|
* of memory in the ISA I/O memory space allocated via
|
|
* an ioctl setting.
|
|
*/
|
|
static unsigned long pccard_mem; /* Physical memory */
|
|
static unsigned char *pccard_kmem; /* Kernel virtual address */
|
|
|
|
static d_open_t crdopen;
|
|
static d_close_t crdclose;
|
|
static d_read_t crdread;
|
|
static d_write_t crdwrite;
|
|
static d_ioctl_t crdioctl;
|
|
static d_poll_t crdpoll;
|
|
|
|
#define CDEV_MAJOR 50
|
|
static struct cdevsw crd_cdevsw = {
|
|
/* open */ crdopen,
|
|
/* close */ crdclose,
|
|
/* read */ crdread,
|
|
/* write */ crdwrite,
|
|
/* ioctl */ crdioctl,
|
|
/* poll */ crdpoll,
|
|
/* mmap */ nommap,
|
|
/* strategy */ nostrategy,
|
|
/* name */ "crd",
|
|
/* maj */ CDEV_MAJOR,
|
|
/* dump */ nodump,
|
|
/* psize */ nopsize,
|
|
/* flags */ 0,
|
|
/* bmaj */ -1
|
|
};
|
|
|
|
/*
|
|
* Power off the slot.
|
|
* (doing it immediately makes the removal of some cards unstable)
|
|
*/
|
|
static void
|
|
power_off_slot(void *arg)
|
|
{
|
|
struct slot *slt = (struct slot *)arg;
|
|
int s;
|
|
|
|
/*
|
|
* The following will generate an interrupt. So, to hold off
|
|
* the interrupt unitl after disable runs so that we can get rid
|
|
* rid of the interrupt before it becomes unsafe to touch the
|
|
* device.
|
|
*/
|
|
s = splhigh();
|
|
/* Power off the slot. */
|
|
slt->pwr_off_pending = 0;
|
|
slt->ctrl->disable(slt);
|
|
splx(s);
|
|
}
|
|
|
|
/*
|
|
* disable_slot - Disables the slot by removing
|
|
* the power and unmapping the I/O
|
|
*/
|
|
static void
|
|
disable_slot(struct slot *slt)
|
|
{
|
|
/* XXX Need to store pccarddev in slt. */
|
|
device_t pccarddev;
|
|
device_t *kids;
|
|
int nkids;
|
|
int i;
|
|
int ret;
|
|
|
|
/*
|
|
* Note that a race condition is possible here; if a
|
|
* driver is accessing the device and it is removed, then
|
|
* all bets are off...
|
|
*/
|
|
pccarddev = devclass_get_device(pccard_devclass, slt->slotnum);
|
|
device_get_children(pccarddev, &kids, &nkids);
|
|
for (i = 0; i < nkids; i++) {
|
|
if ((ret = device_delete_child(pccarddev, kids[i])) != 0)
|
|
printf("pccard: delete failed: %d\n", ret);
|
|
}
|
|
|
|
/* Power off the slot 1/2 second after removal of the card */
|
|
slt->poff_ch = timeout(power_off_slot, (caddr_t)slt, hz / 2);
|
|
slt->pwr_off_pending = 1;
|
|
}
|
|
|
|
static void
|
|
disable_slot_to(void *argp)
|
|
{
|
|
struct slot *slt = (struct slot *) argp;
|
|
|
|
disable_slot(slt);
|
|
slt->state = empty;
|
|
printf("pccard: card removed, slot %d\n", slt->slotnum);
|
|
pccard_remove_beep();
|
|
selwakeup(&slt->selp);
|
|
}
|
|
|
|
/*
|
|
* Disables the slot later when we drop to spl0 via a timeout.
|
|
*/
|
|
static void
|
|
disable_slot_spl0(struct slot *slt)
|
|
{
|
|
slt->disable_ch = timeout(disable_slot_to, (caddr_t) slt, 0);
|
|
}
|
|
|
|
|
|
/*
|
|
* APM hooks for suspending and resuming.
|
|
*/
|
|
#if NAPM > 0
|
|
static int
|
|
slot_suspend(void *arg)
|
|
{
|
|
struct slot *slt = arg;
|
|
|
|
/* This code stolen from pccard_event:card_removed */
|
|
if (slt->state == filled) {
|
|
int s = splhigh();
|
|
disable_slot(slt);
|
|
slt->laststate = filled;
|
|
slt->state = suspend;
|
|
splx(s);
|
|
printf("pccard: card disabled, slot %d\n", slt->slotnum);
|
|
}
|
|
/*
|
|
* Disable any pending timeouts for this slot since we're
|
|
* powering it down/disabling now.
|
|
*/
|
|
untimeout(power_off_slot, (caddr_t)slt, slt->disable_ch);
|
|
untimeout(power_off_slot, (caddr_t)slt, slt->poff_ch);
|
|
slt->ctrl->disable(slt);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
slot_resume(void *arg)
|
|
{
|
|
struct slot *slt = arg;
|
|
|
|
if (pcic_resume_reset)
|
|
slt->ctrl->resume(slt);
|
|
/* This code stolen from pccard_event:card_inserted */
|
|
if (slt->state == suspend) {
|
|
slt->laststate = suspend;
|
|
slt->state = empty;
|
|
slt->insert_seq = 1;
|
|
untimeout(inserted, (void *)slt, slt->insert_ch);
|
|
slt->insert_ch = timeout(inserted, (void *)slt, hz/4);
|
|
selwakeup(&slt->selp);
|
|
}
|
|
return (0);
|
|
}
|
|
#endif /* NAPM > 0 */
|
|
|
|
/*
|
|
* pccard_alloc_slot - Called from controller probe
|
|
* routine, this function allocates a new PC-CARD slot
|
|
* and initialises the data structures using the data provided.
|
|
* It returns the allocated structure to the probe routine
|
|
* to allow the controller specific data to be initialised.
|
|
*/
|
|
struct slot *
|
|
pccard_alloc_slot(struct slot_ctrl *ctrl)
|
|
{
|
|
struct slot *slt;
|
|
int slotno;
|
|
|
|
for (slotno = 0; slotno < MAXSLOT; slotno++)
|
|
if (pccard_slots[slotno] == 0)
|
|
break;
|
|
if (slotno == MAXSLOT)
|
|
return(0);
|
|
|
|
MALLOC(slt, struct slot *, sizeof(*slt), M_DEVBUF, M_WAITOK);
|
|
bzero(slt, sizeof(*slt));
|
|
make_dev(&crd_cdevsw, slotno, 0, 0, 0600, "card%d", slotno);
|
|
if (ctrl->extra) {
|
|
MALLOC(slt->cdata, void *, ctrl->extra, M_DEVBUF, M_WAITOK);
|
|
bzero(slt->cdata, ctrl->extra);
|
|
}
|
|
slt->ctrl = ctrl;
|
|
slt->slotnum = slotno;
|
|
pccard_slots[slotno] = slt;
|
|
slt->next = slot_list;
|
|
slot_list = slt;
|
|
/*
|
|
* If this controller hasn't been seen before, then
|
|
* link it into the list of controllers.
|
|
*/
|
|
if (ctrl->slots++ == 0) {
|
|
ctrl->next = cont_list;
|
|
cont_list = ctrl;
|
|
if (ctrl->maxmem > NUM_MEM_WINDOWS)
|
|
ctrl->maxmem = NUM_MEM_WINDOWS;
|
|
if (ctrl->maxio > NUM_IO_WINDOWS)
|
|
ctrl->maxio = NUM_IO_WINDOWS;
|
|
}
|
|
callout_handle_init(&slt->insert_ch);
|
|
callout_handle_init(&slt->poff_ch);
|
|
callout_handle_init(&slt->disable_ch);
|
|
#if NAPM > 0
|
|
{
|
|
struct apmhook *ap;
|
|
|
|
ap = &s_hook[slt->slotnum];
|
|
ap->ah_fun = slot_suspend;
|
|
ap->ah_arg = (void *)slt;
|
|
ap->ah_name = "pcccard";
|
|
ap->ah_order = APM_MID_ORDER;
|
|
apm_hook_establish(APM_HOOK_SUSPEND, ap);
|
|
ap = &r_hook[slt->slotnum];
|
|
ap->ah_fun = slot_resume;
|
|
ap->ah_arg = (void *)slt;
|
|
ap->ah_name = "pccard";
|
|
ap->ah_order = APM_MID_ORDER;
|
|
apm_hook_establish(APM_HOOK_RESUME, ap);
|
|
}
|
|
#endif /* NAPM > 0 */
|
|
return(slt);
|
|
}
|
|
|
|
/*
|
|
* allocate_driver - Create a new device entry for this
|
|
* slot, and attach a driver to it.
|
|
*/
|
|
static int
|
|
allocate_driver(struct slot *slt, struct dev_desc *desc)
|
|
{
|
|
struct pccard_devinfo *devi;
|
|
device_t pccarddev;
|
|
int err, irq = 0;
|
|
device_t child;
|
|
|
|
pccarddev = devclass_get_device(pccard_devclass, 0);
|
|
irq = ffs(desc->irqmask) - 1;
|
|
MALLOC(devi, struct pccard_devinfo *, sizeof(*devi), M_DEVBUF, M_WAITOK);
|
|
bzero(devi, sizeof(*devi));
|
|
strcpy(devi->name, desc->name);
|
|
/*
|
|
* Create an entry for the device under this slot.
|
|
*/
|
|
devi->running = 1;
|
|
devi->slt = slt;
|
|
bcopy(desc->misc, devi->misc, sizeof(desc->misc));
|
|
resource_list_init(&devi->resources);
|
|
child = devi->isahd.id_device = device_add_child(pccarddev, devi->name,
|
|
desc->unit, devi);
|
|
device_set_flags(child, desc->flags);
|
|
err = bus_set_resource(child, SYS_RES_IOPORT, 0, desc->iobase,
|
|
desc->iosize);
|
|
if (err)
|
|
goto err;
|
|
if (irq)
|
|
err = bus_set_resource(child, SYS_RES_IRQ, 0, irq, 1);
|
|
if (err)
|
|
goto err;
|
|
if (desc->memsize) {
|
|
err = bus_set_resource(child, SYS_RES_MEMORY, 0, desc->mem,
|
|
desc->memsize);
|
|
if (err)
|
|
goto err;
|
|
}
|
|
err = device_probe_and_attach(child);
|
|
err:
|
|
if (err)
|
|
device_delete_child(pccarddev, child);
|
|
return (err);
|
|
}
|
|
|
|
/*
|
|
* card insert routine - Called from a timeout to debounce
|
|
* insertion events.
|
|
*/
|
|
static void
|
|
inserted(void *arg)
|
|
{
|
|
struct slot *slt = arg;
|
|
|
|
slt->state = filled;
|
|
/*
|
|
* Enable 5V to the card so that the CIS can be read.
|
|
*/
|
|
slt->pwr.vcc = 50;
|
|
slt->pwr.vpp = 0;
|
|
/*
|
|
* Disable any pending timeouts for this slot, and explicitly
|
|
* power it off right now. Then, re-enable the power using
|
|
* the (possibly new) power settings.
|
|
*/
|
|
untimeout(power_off_slot, (caddr_t)slt, slt->disable_ch);
|
|
untimeout(power_off_slot, (caddr_t)slt, slt->poff_ch);
|
|
power_off_slot(slt);
|
|
slt->ctrl->power(slt);
|
|
|
|
printf("pccard: card inserted, slot %d\n", slt->slotnum);
|
|
/*
|
|
* Now start resetting the card.
|
|
*/
|
|
slt->ctrl->reset(slt);
|
|
}
|
|
|
|
/*
|
|
* Card event callback. Called at splhigh to prevent
|
|
* device interrupts from interceding.
|
|
*/
|
|
void
|
|
pccard_event(struct slot *slt, enum card_event event)
|
|
{
|
|
if (slt->insert_seq) {
|
|
slt->insert_seq = 0;
|
|
untimeout(inserted, (void *)slt, slt->insert_ch);
|
|
}
|
|
|
|
switch(event) {
|
|
case card_removed:
|
|
/*
|
|
* The slot and devices are disabled, but the
|
|
* data structures are not unlinked.
|
|
*/
|
|
if (slt->state == filled) {
|
|
disable_slot_spl0(slt);
|
|
}
|
|
break;
|
|
case card_inserted:
|
|
slt->insert_seq = 1;
|
|
slt->insert_ch = timeout(inserted, (void *)slt, hz/4);
|
|
pccard_insert_beep();
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Device driver interface.
|
|
*/
|
|
static int
|
|
crdopen(dev_t dev, int oflags, int devtype, struct proc *p)
|
|
{
|
|
struct slot *slt;
|
|
|
|
if (minor(dev) >= MAXSLOT)
|
|
return(ENXIO);
|
|
slt = pccard_slots[minor(dev)];
|
|
if (slt == 0)
|
|
return(ENXIO);
|
|
if (slt->rwmem == 0)
|
|
slt->rwmem = MDF_ATTR;
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Close doesn't de-allocate any resources, since
|
|
* slots may be assigned to drivers already.
|
|
*/
|
|
static int
|
|
crdclose(dev_t dev, int fflag, int devtype, struct proc *p)
|
|
{
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* read interface. Map memory at lseek offset,
|
|
* then transfer to user space.
|
|
*/
|
|
static int
|
|
crdread(dev_t dev, struct uio *uio, int ioflag)
|
|
{
|
|
struct slot *slt = pccard_slots[minor(dev)];
|
|
struct mem_desc *mp, oldmap;
|
|
unsigned char *p;
|
|
unsigned int offs;
|
|
int error = 0, win, count;
|
|
|
|
if (slt == 0 || slt->state != filled)
|
|
return(ENXIO);
|
|
if (pccard_mem == 0)
|
|
return(ENOMEM);
|
|
for (win = 0; win < slt->ctrl->maxmem; win++)
|
|
if ((slt->mem[win].flags & MDF_ACTIVE) == 0)
|
|
break;
|
|
if (win >= slt->ctrl->maxmem)
|
|
return(EBUSY);
|
|
mp = &slt->mem[win];
|
|
oldmap = *mp;
|
|
mp->flags = slt->rwmem|MDF_ACTIVE;
|
|
while (uio->uio_resid && error == 0) {
|
|
mp->card = uio->uio_offset;
|
|
mp->size = PCCARD_MEMSIZE;
|
|
mp->start = (caddr_t)(void *)(uintptr_t)pccard_mem;
|
|
if ((error = slt->ctrl->mapmem(slt, win)) != 0)
|
|
break;
|
|
offs = (unsigned int)uio->uio_offset & (PCCARD_MEMSIZE - 1);
|
|
p = pccard_kmem + offs;
|
|
count = MIN(PCCARD_MEMSIZE - offs, uio->uio_resid);
|
|
error = uiomove(p, count, uio);
|
|
}
|
|
/*
|
|
* Restore original map.
|
|
*/
|
|
*mp = oldmap;
|
|
slt->ctrl->mapmem(slt, win);
|
|
|
|
return(error);
|
|
}
|
|
|
|
/*
|
|
* crdwrite - Write data to card memory.
|
|
* Handles wrap around so that only one memory
|
|
* window is used.
|
|
*/
|
|
static int
|
|
crdwrite(dev_t dev, struct uio *uio, int ioflag)
|
|
{
|
|
struct slot *slt = pccard_slots[minor(dev)];
|
|
struct mem_desc *mp, oldmap;
|
|
unsigned char *p;
|
|
unsigned int offs;
|
|
int error = 0, win, count;
|
|
|
|
if (slt == 0 || slt->state != filled)
|
|
return(ENXIO);
|
|
if (pccard_mem == 0)
|
|
return(ENOMEM);
|
|
for (win = 0; win < slt->ctrl->maxmem; win++)
|
|
if ((slt->mem[win].flags & MDF_ACTIVE) == 0)
|
|
break;
|
|
if (win >= slt->ctrl->maxmem)
|
|
return(EBUSY);
|
|
mp = &slt->mem[win];
|
|
oldmap = *mp;
|
|
mp->flags = slt->rwmem|MDF_ACTIVE;
|
|
while (uio->uio_resid && error == 0) {
|
|
mp->card = uio->uio_offset;
|
|
mp->size = PCCARD_MEMSIZE;
|
|
mp->start = (caddr_t)(void *)(uintptr_t)pccard_mem;
|
|
if ((error = slt->ctrl->mapmem(slt, win)) != 0)
|
|
break;
|
|
offs = (unsigned int)uio->uio_offset & (PCCARD_MEMSIZE - 1);
|
|
p = pccard_kmem + offs;
|
|
count = MIN(PCCARD_MEMSIZE - offs, uio->uio_resid);
|
|
error = uiomove(p, count, uio);
|
|
}
|
|
/*
|
|
* Restore original map.
|
|
*/
|
|
*mp = oldmap;
|
|
slt->ctrl->mapmem(slt, win);
|
|
|
|
return(error);
|
|
}
|
|
|
|
/*
|
|
* ioctl calls - allows setting/getting of memory and I/O
|
|
* descriptors, and assignment of drivers.
|
|
*/
|
|
static int
|
|
crdioctl(dev_t dev, u_long cmd, caddr_t data, int fflag, struct proc *p)
|
|
{
|
|
struct slot *slt = pccard_slots[minor(dev)];
|
|
struct mem_desc *mp;
|
|
struct io_desc *ip;
|
|
int s, err;
|
|
|
|
/* beep is disabled until the 1st call of crdioctl() */
|
|
pccard_beep_select(BEEP_ON);
|
|
|
|
if (slt == 0 && cmd != PIOCRWMEM)
|
|
return(ENXIO);
|
|
switch(cmd) {
|
|
default:
|
|
if (slt->ctrl->ioctl)
|
|
return(slt->ctrl->ioctl(slt, cmd, data));
|
|
return(ENOTTY);
|
|
/*
|
|
* Get slot state.
|
|
*/
|
|
case PIOCGSTATE:
|
|
s = splhigh();
|
|
((struct slotstate *)data)->state = slt->state;
|
|
((struct slotstate *)data)->laststate = slt->laststate;
|
|
slt->laststate = slt->state;
|
|
splx(s);
|
|
((struct slotstate *)data)->maxmem = slt->ctrl->maxmem;
|
|
((struct slotstate *)data)->maxio = slt->ctrl->maxio;
|
|
((struct slotstate *)data)->irqs = 0;
|
|
break;
|
|
/*
|
|
* Get memory context.
|
|
*/
|
|
case PIOCGMEM:
|
|
s = ((struct mem_desc *)data)->window;
|
|
if (s < 0 || s >= slt->ctrl->maxmem)
|
|
return(EINVAL);
|
|
mp = &slt->mem[s];
|
|
((struct mem_desc *)data)->flags = mp->flags;
|
|
((struct mem_desc *)data)->start = mp->start;
|
|
((struct mem_desc *)data)->size = mp->size;
|
|
((struct mem_desc *)data)->card = mp->card;
|
|
break;
|
|
/*
|
|
* Set memory context. If context already active, then unmap it.
|
|
* It is hard to see how the parameters can be checked.
|
|
* At the very least, we only allow root to set the context.
|
|
*/
|
|
case PIOCSMEM:
|
|
if (suser(p))
|
|
return(EPERM);
|
|
if (slt->state != filled)
|
|
return(ENXIO);
|
|
s = ((struct mem_desc *)data)->window;
|
|
if (s < 0 || s >= slt->ctrl->maxmem)
|
|
return(EINVAL);
|
|
slt->mem[s] = *((struct mem_desc *)data);
|
|
return(slt->ctrl->mapmem(slt, s));
|
|
/*
|
|
* Get I/O port context.
|
|
*/
|
|
case PIOCGIO:
|
|
s = ((struct io_desc *)data)->window;
|
|
if (s < 0 || s >= slt->ctrl->maxio)
|
|
return(EINVAL);
|
|
ip = &slt->io[s];
|
|
((struct io_desc *)data)->flags = ip->flags;
|
|
((struct io_desc *)data)->start = ip->start;
|
|
((struct io_desc *)data)->size = ip->size;
|
|
break;
|
|
/*
|
|
* Set I/O port context.
|
|
*/
|
|
case PIOCSIO:
|
|
if (suser(p))
|
|
return(EPERM);
|
|
if (slt->state != filled)
|
|
return(ENXIO);
|
|
s = ((struct io_desc *)data)->window;
|
|
if (s < 0 || s >= slt->ctrl->maxio)
|
|
return(EINVAL);
|
|
slt->io[s] = *((struct io_desc *)data);
|
|
/* XXX Don't actually map */
|
|
return 0;
|
|
break;
|
|
/*
|
|
* Set memory window flags for read/write interface.
|
|
*/
|
|
case PIOCRWFLAG:
|
|
slt->rwmem = *(int *)data;
|
|
break;
|
|
/*
|
|
* Set the memory window to be used for the read/write interface.
|
|
*/
|
|
case PIOCRWMEM:
|
|
if (*(unsigned long *)data == 0) {
|
|
if (pccard_mem)
|
|
*(unsigned long *)data = pccard_mem;
|
|
break;
|
|
}
|
|
if (suser(p))
|
|
return(EPERM);
|
|
/*
|
|
* Validate the memory by checking it against the I/O
|
|
* memory range. It must also start on an aligned block size.
|
|
*/
|
|
if (invalid_io_memory(*(unsigned long *)data, PCCARD_MEMSIZE))
|
|
return(EINVAL);
|
|
if (*(unsigned long *)data & (PCCARD_MEMSIZE-1))
|
|
return(EINVAL);
|
|
/*
|
|
* Map it to kernel VM.
|
|
*/
|
|
pccard_mem = *(unsigned long *)data;
|
|
pccard_kmem =
|
|
(unsigned char *)(void *)(uintptr_t)
|
|
(pccard_mem + atdevbase - IOM_BEGIN);
|
|
break;
|
|
/*
|
|
* Set power values.
|
|
*/
|
|
case PIOCSPOW:
|
|
slt->pwr = *(struct power *)data;
|
|
return(slt->ctrl->power(slt));
|
|
/*
|
|
* Allocate a driver to this slot.
|
|
*/
|
|
case PIOCSDRV:
|
|
if (suser(p))
|
|
return(EPERM);
|
|
err = allocate_driver(slt, (struct dev_desc *)data);
|
|
if (!err)
|
|
pccard_success_beep();
|
|
else
|
|
pccard_failure_beep();
|
|
return err;
|
|
case PIOCSBEEP:
|
|
if (pccard_beep_select(*(int *)data)) {
|
|
return EINVAL;
|
|
}
|
|
break;
|
|
}
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* poll - Poll on exceptions will return true
|
|
* when a change in card status occurs.
|
|
*/
|
|
static int
|
|
crdpoll(dev_t dev, int events, struct proc *p)
|
|
{
|
|
int s;
|
|
struct slot *slt = pccard_slots[minor(dev)];
|
|
int revents = 0;
|
|
|
|
if (events & (POLLIN | POLLRDNORM))
|
|
revents |= events & (POLLIN | POLLRDNORM);
|
|
|
|
if (events & (POLLOUT | POLLWRNORM))
|
|
revents |= events & (POLLIN | POLLRDNORM);
|
|
|
|
s = splhigh();
|
|
/*
|
|
* select for exception - card event.
|
|
*/
|
|
if (events & POLLRDBAND)
|
|
if (slt == 0 || slt->laststate != slt->state)
|
|
revents |= POLLRDBAND;
|
|
|
|
if (revents == 0)
|
|
selrecord(p, &slt->selp);
|
|
|
|
splx(s);
|
|
return (revents);
|
|
}
|
|
|
|
/*
|
|
* invalid_io_memory - verify that the ISA I/O memory block
|
|
* is a valid and unallocated address.
|
|
* A simple check of the range is done, and then a
|
|
* search of the current devices is done to check for
|
|
* overlapping regions.
|
|
*/
|
|
static int
|
|
invalid_io_memory(unsigned long adr, int size)
|
|
{
|
|
/* XXX - What's magic about 0xC0000?? */
|
|
if (adr < 0xC0000 || (adr+size) > IOM_END)
|
|
return(1);
|
|
return(0);
|
|
}
|