freebsd-dev/sys/dev/fb/machfbreg.h
Marius Strobl 0a710885bd Add machfb(4), a driver for ATI Mach64 graphics chips intended for
use with syscons(4) on sparc64. It's based on the respective NetBSD
driver with some additional info (initialisation/hardware cursor)
obtained from the Xorg 'ati' driver and some ideas taken from
creator(4). ATI Mach64 chips ("ATI Rage") are quite common as low-
end graphics chips in PCI-based sun4u machines and are used on-board
in e.g. Blade 100 and a couple of OEM products. Most if not all of
the Sun PGX add-on cards family (descriptions of the PGX32 are
conflicting but most say it's a Rage Pro) are also based on these
chips. Depending on the version of the OBP Mach64 cards destined for
use in i386 machines also work in sun4u machines.
The driver uses pixel mode with hardware acceleration as far as
syscons(4) currently permits on sparc64 so text mode is already
quite fast. The hardware cursor is used for the mouse pointer;
for one because this is a "restriction" induced in syscons(4) on
sparc64 by creator(4) and also because of issues with mapping
the aperture when used as a low-level early during boot. Due to
insufficiencies in the available documentation I didn't manage to
get mode switch work properly (sync problems), yet. So for now
this driver relies on the OBP having initialised a mode (as does
creator(4)). On all of the tested machines is even true when using
a serial console (and also not only when the OBP switched to a
serial console because no keyboard is present). In general however
the states the Mach64 chips are left in by the OBP vary a lot
depending on the version of the OBP. This e.g. includes the aperture
not being mapped in even when used as the console and the OBP just
barfing when asked to map it. The latter is also the reason for the
existence of this native driver in FreeBSD rather than taking an
OFW frambuffer approach.
Xorg is also happy to talk to these chips by mmap'ing them through
this driver. For some hardware configs like on the Blade 100 a fix
for the Xorg sparc64 MD bus code is however needed (added in version
6.8.2_2 of the xorg-server port).
The video driver font loading and saving methods are not implemented,
yet, as syscons(4) needs more work in that area to work viable on
sparc64.
With minor modifications machfb(4) would most likely also work on
powerpc, when #ifdef'ing the OFW and possibly implementing mode
setting probably also on the other archs. The latter is however
not very practible at the moment as it would conflict with vga(4).

Tested/developed with:	Rage II+ add-on card on AX1105 and AXi board,
			AXe board (on-board Rage Pro)
Additional testing by:	marcel (Ultra 5 w/ on-board Rage Pro),
			scottl (Naturetech GENIALstation 777S w/ on-board
			Rage Mobility M1),
			Michiel Boland and Ilmar S. Habibulin (Blade 100
			w/ on-board Rage XL)
2005-05-21 20:47:38 +00:00

459 lines
15 KiB
C

/*-
* Copyright 1992,1993,1994,1995,1996,1997 by Kevin E. Martin, Chapel Hill, North Carolina.
*
* Permission to use, copy, modify, distribute, and sell this software and
* its documentation for any purpose is hereby granted without fee,
* provided that the above copyright notice appear in all copies and that
* both that copyright notice and this permission notice appear in
* supporting documentation, and that the name of Kevin E. Martin not be
* used in advertising or publicity pertaining to distribution of the
* software without specific, written prior permission. Kevin E. Martin
* makes no representations about the suitability of this software for any
* purpose. It is provided "as is" without express or implied warranty.
*
* KEVIN E. MARTIN, RICKARD E. FAITH, AND TIAGO GONS DISCLAIM ALL
* WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL THE
* AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
* ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
* WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
* ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
* SOFTWARE.
*
* Modified for the Mach-8 by Rickard E. Faith (faith@cs.unc.edu)
* Modified for the Mach32 by Kevin E. Martin (martin@cs.unc.edu)
* Modified for the Mach64 by Kevin E. Martin (martin@cs.unc.edu)
*
* from: NetBSD: machfbreg.h,v 1.1 2002/10/24 18:15:57 junyoung Exp
*
* $FreeBSD$
*/
#ifndef _DEV_FB_MACHFB_H_
#define _DEV_FB_MACHFB_H_
/* NON-GUI MEMORY MAPPED Registers - expressed in BYTE offsets */
#define CRTC_H_TOTAL_DISP 0x0000 /* Dword offset 00 */
#define CRTC_H_SYNC_STRT_WID 0x0004 /* Dword offset 01 */
#define CRTC_V_TOTAL_DISP 0x0008 /* Dword offset 02 */
#define CRTC_V_SYNC_STRT_WID 0x000C /* Dword offset 03 */
#define CRTC_VLINE_CRNT_VLINE 0x0010 /* Dword offset 04 */
#define CRTC_OFF_PITCH 0x0014 /* Dword offset 05 */
#define CRTC_INT_CNTL 0x0018 /* Dword offset 06 */
#define CRTC_GEN_CNTL 0x001C /* Dword offset 07 */
#define DSP_CONFIG 0x0020 /* Dword offset 08 */
#define DSP_ON_OFF 0x0024 /* Dword offset 09 */
#define SHARED_CNTL 0x0038 /* Dword offset 0E */
#define OVR_CLR 0x0040 /* Dword offset 10 */
#define OVR_WID_LEFT_RIGHT 0x0044 /* Dword offset 11 */
#define OVR_WID_TOP_BOTTOM 0x0048 /* Dword offset 12 */
#define CUR_CLR0 0x0060 /* Dword offset 18 */
#define CUR_CLR1 0x0064 /* Dword offset 19 */
#define CUR_OFFSET 0x0068 /* Dword offset 1A */
#define CUR_HORZ_VERT_POSN 0x006C /* Dword offset 1B */
#define CUR_HORZ_VERT_OFF 0x0070 /* Dword offset 1C */
#define HW_DEBUG 0x007C /* Dword offset 1F */
#define SCRATCH_REG0 0x0080 /* Dword offset 20 */
#define SCRATCH_REG1 0x0084 /* Dword offset 21 */
#define CLOCK_CNTL 0x0090 /* Dword offset 24 */
#define BUS_CNTL 0x00A0 /* Dword offset 28 */
#define LCD_INDEX 0x00A4 /* Dword offset 29 (LTPro) */
#define LCD_DATA 0x00A8 /* Dword offset 2A (LTPro) */
#define MEM_CNTL 0x00B0 /* Dword offset 2C */
#define MEM_VGA_WP_SEL 0x00B4 /* Dword offset 2D */
#define MEM_VGA_RP_SEL 0x00B8 /* Dword offset 2E */
#define DAC_REGS 0x00C0 /* Dword offset 30 */
#define DAC_WINDEX 0x00C0 /* Dword offset 30 */
#define DAC_DATA 0x00C1 /* Dword offset 30 */
#define DAC_MASK 0x00C2 /* Dword offset 30 */
#define DAC_RINDEX 0x00C3 /* Dword offset 30 */
#define DAC_CNTL 0x00C4 /* Dword offset 31 */
#define HORZ_STRETCHING 0x00C8 /* Dword offset 32 (LT) */
#define VERT_STRETCHING 0x00CC /* Dword offset 33 (LT) */
#define GEN_TEST_CNTL 0x00D0 /* Dword offset 34 */
#define LCD_GEN_CNTL 0x00D4 /* Dword offset 35 (LT) */
#define POWER_MANAGEMENT 0x00D8 /* Dword offset 36 (LT) */
#define CONFIG_CNTL 0x00DC /* Dword offset 37 (CT, ET, VT) */
#define CONFIG_CHIP_ID 0x00E0 /* Dword offset 38 */
#define CONFIG_STAT0 0x00E4 /* Dword offset 39 */
#define CONFIG_STAT1 0x00E8 /* Dword offset 3A */
/* GUI MEMORY MAPPED Registers */
#define DST_OFF_PITCH 0x0100 /* Dword offset 40 */
#define DST_X 0x0104 /* Dword offset 41 */
#define DST_Y 0x0108 /* Dword offset 42 */
#define DST_Y_X 0x010C /* Dword offset 43 */
#define DST_WIDTH 0x0110 /* Dword offset 44 */
#define DST_HEIGHT 0x0114 /* Dword offset 45 */
#define DST_HEIGHT_WIDTH 0x0118 /* Dword offset 46 */
#define DST_X_WIDTH 0x011C /* Dword offset 47 */
#define DST_BRES_LNTH 0x0120 /* Dword offset 48 */
#define DST_BRES_ERR 0x0124 /* Dword offset 49 */
#define DST_BRES_INC 0x0128 /* Dword offset 4A */
#define DST_BRES_DEC 0x012C /* Dword offset 4B */
#define DST_CNTL 0x0130 /* Dword offset 4C */
#define SRC_OFF_PITCH 0x0180 /* Dword offset 60 */
#define SRC_X 0x0184 /* Dword offset 61 */
#define SRC_Y 0x0188 /* Dword offset 62 */
#define SRC_Y_X 0x018C /* Dword offset 63 */
#define SRC_WIDTH1 0x0190 /* Dword offset 64 */
#define SRC_HEIGHT1 0x0194 /* Dword offset 65 */
#define SRC_HEIGHT1_WIDTH1 0x0198 /* Dword offset 66 */
#define SRC_X_START 0x019C /* Dword offset 67 */
#define SRC_Y_START 0x01A0 /* Dword offset 68 */
#define SRC_Y_X_START 0x01A4 /* Dword offset 69 */
#define SRC_WIDTH2 0x01A8 /* Dword offset 6A */
#define SRC_HEIGHT2 0x01AC /* Dword offset 6B */
#define SRC_HEIGHT2_WIDTH2 0x01B0 /* Dword offset 6C */
#define SRC_CNTL 0x01B4 /* Dword offset 6D */
#define HOST_DATA0 0x0200 /* Dword offset 80 */
#define HOST_DATA1 0x0204 /* Dword offset 81 */
#define HOST_DATA2 0x0208 /* Dword offset 82 */
#define HOST_DATA3 0x020C /* Dword offset 83 */
#define HOST_DATA4 0x0210 /* Dword offset 84 */
#define HOST_DATA5 0x0214 /* Dword offset 85 */
#define HOST_DATA6 0x0218 /* Dword offset 86 */
#define HOST_DATA7 0x021C /* Dword offset 87 */
#define HOST_DATA8 0x0220 /* Dword offset 88 */
#define HOST_DATA9 0x0224 /* Dword offset 89 */
#define HOST_DATAA 0x0228 /* Dword offset 8A */
#define HOST_DATAB 0x022C /* Dword offset 8B */
#define HOST_DATAC 0x0230 /* Dword offset 8C */
#define HOST_DATAD 0x0234 /* Dword offset 8D */
#define HOST_DATAE 0x0238 /* Dword offset 8E */
#define HOST_DATAF 0x023C /* Dword offset 8F */
#define HOST_CNTL 0x0240 /* Dword offset 90 */
#define PAT_REG0 0x0280 /* Dword offset A0 */
#define PAT_REG1 0x0284 /* Dword offset A1 */
#define PAT_CNTL 0x0288 /* Dword offset A2 */
#define SC_LEFT 0x02A0 /* Dword offset A8 */
#define SC_RIGHT 0x02A4 /* Dword offset A9 */
#define SC_LEFT_RIGHT 0x02A8 /* Dword offset AA */
#define SC_TOP 0x02AC /* Dword offset AB */
#define SC_BOTTOM 0x02B0 /* Dword offset AC */
#define SC_TOP_BOTTOM 0x02B4 /* Dword offset AD */
#define DP_BKGD_CLR 0x02C0 /* Dword offset B0 */
#define DP_FRGD_CLR 0x02C4 /* Dword offset B1 */
#define DP_WRITE_MASK 0x02C8 /* Dword offset B2 */
#define DP_CHAIN_MASK 0x02CC /* Dword offset B3 */
#define DP_PIX_WIDTH 0x02D0 /* Dword offset B4 */
#define DP_MIX 0x02D4 /* Dword offset B5 */
#define DP_SRC 0x02D8 /* Dword offset B6 */
#define CLR_CMP_CLR 0x0300 /* Dword offset C0 */
#define CLR_CMP_MASK 0x0304 /* Dword offset C1 */
#define CLR_CMP_CNTL 0x0308 /* Dword offset C2 */
#define FIFO_STAT 0x0310 /* Dword offset C4 */
#define CONTEXT_MASK 0x0320 /* Dword offset C8 */
#define CONTEXT_LOAD_CNTL 0x032C /* Dword offset CB */
#define GUI_TRAJ_CNTL 0x0330 /* Dword offset CC */
#define GUI_STAT 0x0338 /* Dword offset CE */
/* CRTC control values */
#define CRTC_HSYNC_NEG 0x00200000
#define CRTC_VSYNC_NEG 0x00200000
#define CRTC_DBL_SCAN_EN 0x00000001
#define CRTC_INTERLACE_EN 0x00000002
#define CRTC_HSYNC_DIS 0x00000004
#define CRTC_VSYNC_DIS 0x00000008
#define CRTC_CSYNC_EN 0x00000010
#define CRTC_PIX_BY_2_EN 0x00000020
#define CRTC_DISPLAY_DIS 0x00000040
#define CRTC_VGA_XOVERSCAN 0x00000080
#define CRTC_PIX_WIDTH 0x00000700
#define CRTC_PIX_WIDTH_4BPP 0x00000100
#define CRTC_PIX_WIDTH_8BPP 0x00000200
#define CRTC_PIX_WIDTH_15BPP 0x00000300
#define CRTC_PIX_WIDTH_16BPP 0x00000400
#define CRTC_PIX_WIDTH_24BPP 0x00000500
#define CRTC_PIX_WIDTH_32BPP 0x00000600
#define CRTC_BYTE_PIX_ORDER 0x00000800
#define CRTC_PIX_ORDER_MSN_LSN 0x00000000
#define CRTC_PIX_ORDER_LSN_MSN 0x00000800
#define CRTC_FIFO_LWM 0x000f0000
#define CRTC_LOCK_REGS 0x00400000
#define CRTC_EXT_DISP_EN 0x01000000
#define CRTC_EN 0x02000000
#define CRTC_DISP_REQ_EN 0x04000000
#define CRTC_VGA_LINEAR 0x08000000
#define CRTC_VSYNC_FALL_EDGE 0x10000000
#define CRTC_VGA_TEXT_132 0x20000000
#define CRTC_CNT_EN 0x40000000
#define CRTC_CUR_B_TEST 0x80000000
#define CRTC_CRNT_VLINE 0x07f00000
#define CRTC_VBLANK 0x00000001
/* DAC control values */
#define DAC_EXT_SEL_RS2 0x01
#define DAC_EXT_SEL_RS3 0x02
#define DAC_8BIT_EN 0x00000100
#define DAC_PIX_DLY_MASK 0x00000600
#define DAC_PIX_DLY_0NS 0x00000000
#define DAC_PIX_DLY_2NS 0x00000200
#define DAC_PIX_DLY_4NS 0x00000400
#define DAC_BLANK_ADJ_MASK 0x00001800
#define DAC_BLANK_ADJ_0 0x00000000
#define DAC_BLANK_ADJ_1 0x00000800
#define DAC_BLANK_ADJ_2 0x00001000
/* Mix control values */
#define MIX_NOT_DST 0x0000
#define MIX_0 0x0001
#define MIX_1 0x0002
#define MIX_DST 0x0003
#define MIX_NOT_SRC 0x0004
#define MIX_XOR 0x0005
#define MIX_XNOR 0x0006
#define MIX_SRC 0x0007
#define MIX_NAND 0x0008
#define MIX_NOT_SRC_OR_DST 0x0009
#define MIX_SRC_OR_NOT_DST 0x000a
#define MIX_OR 0x000b
#define MIX_AND 0x000c
#define MIX_SRC_AND_NOT_DST 0x000d
#define MIX_NOT_SRC_AND_DST 0x000e
#define MIX_NOR 0x000f
/* Maximum engine dimensions */
#define ENGINE_MIN_X 0
#define ENGINE_MIN_Y 0
#define ENGINE_MAX_X 4095
#define ENGINE_MAX_Y 16383
/* Mach64 engine bit constants - these are typically ORed together */
/* HW_DEBUG register constants */
/* For RagePro only... */
#define AUTO_FF_DIS 0x000001000
#define AUTO_BLKWRT_DIS 0x000002000
/* BUS_CNTL register constants */
#define BUS_FIFO_ERR_ACK 0x00200000
#define BUS_HOST_ERR_ACK 0x00800000
#define BUS_APER_REG_DIS 0x00000010
/* GEN_TEST_CNTL register constants */
#define GEN_OVR_OUTPUT_EN 0x20
#define HWCURSOR_ENABLE 0x80
#define GUI_ENGINE_ENABLE 0x100
#define BLOCK_WRITE_ENABLE 0x200
/* DSP_CONFIG register constants */
#define DSP_XCLKS_PER_QW 0x00003fff
#define DSP_LOOP_LATENCY 0x000f0000
#define DSP_PRECISION 0x00700000
/* DSP_ON_OFF register constants */
#define DSP_OFF 0x000007ff
#define DSP_ON 0x07ff0000
/* SHARED_CNTL register constants */
#define CTD_FIFO5 0x01000000
/* CLOCK_CNTL register constants */
#define CLOCK_SEL 0x0f
#define CLOCK_DIV 0x30
#define CLOCK_DIV1 0x00
#define CLOCK_DIV2 0x10
#define CLOCK_DIV4 0x20
#define CLOCK_STROBE 0x40
#define PLL_WR_EN 0x02
/* PLL registers */
#define PLL_MACRO_CNTL 0x01
#define PLL_REF_DIV 0x02
#define PLL_GEN_CNTL 0x03
#define MCLK_FB_DIV 0x04
#define PLL_VCLK_CNTL 0x05
#define VCLK_POST_DIV 0x06
#define VCLK0_FB_DIV 0x07
#define VCLK1_FB_DIV 0x08
#define VCLK2_FB_DIV 0x09
#define VCLK3_FB_DIV 0x0A
#define PLL_XCLK_CNTL 0x0B
#define PLL_TEST_CTRL 0x0E
#define PLL_TEST_COUNT 0x0F
/* Memory types for CT, ET, VT, GT */
#define DRAM 1
#define EDO_DRAM 2
#define PSEUDO_EDO 3
#define SDRAM 4
#define SGRAM 5
#define SGRAM32 6
#define DAC_INTERNAL 0x00
#define DAC_IBMRGB514 0x01
#define DAC_ATI68875 0x02
#define DAC_TVP3026_A 0x72
#define DAC_BT476 0x03
#define DAC_BT481 0x04
#define DAC_ATT20C491 0x14
#define DAC_SC15026 0x24
#define DAC_MU9C1880 0x34
#define DAC_IMSG174 0x44
#define DAC_ATI68860_B 0x05
#define DAC_ATI68860_C 0x15
#define DAC_TVP3026_B 0x75
#define DAC_STG1700 0x06
#define DAC_ATT498 0x16
#define DAC_STG1702 0x07
#define DAC_SC15021 0x17
#define DAC_ATT21C498 0x27
#define DAC_STG1703 0x37
#define DAC_CH8398 0x47
#define DAC_ATT20C408 0x57
#define CLK_ATI18818_0 0
#define CLK_ATI18818_1 1
#define CLK_STG1703 2
#define CLK_CH8398 3
#define CLK_INTERNAL 4
#define CLK_ATT20C408 5
#define CLK_IBMRGB514 6
/* DST_CNTL register constants */
#define DST_X_RIGHT_TO_LEFT 0
#define DST_X_LEFT_TO_RIGHT 1
#define DST_Y_BOTTOM_TO_TOP 0
#define DST_Y_TOP_TO_BOTTOM 2
#define DST_X_MAJOR 0
#define DST_Y_MAJOR 4
#define DST_X_TILE 8
#define DST_Y_TILE 0x10
#define DST_LAST_PEL 0x20
#define DST_POLYGON_ENABLE 0x40
#define DST_24_ROTATION_ENABLE 0x80
/* SRC_CNTL register constants */
#define SRC_PATTERN_ENABLE 1
#define SRC_ROTATION_ENABLE 2
#define SRC_LINEAR_ENABLE 4
#define SRC_BYTE_ALIGN 8
#define SRC_LINE_X_RIGHT_TO_LEFT 0
#define SRC_LINE_X_LEFT_TO_RIGHT 0x10
/* HOST_CNTL register constants */
#define HOST_BYTE_ALIGN 1
/* DP_CHAIN_MASK register constants */
#define DP_CHAIN_4BPP 0x8888
#define DP_CHAIN_7BPP 0xD2D2
#define DP_CHAIN_8BPP 0x8080
#define DP_CHAIN_8BPP_RGB 0x9292
#define DP_CHAIN_15BPP 0x4210
#define DP_CHAIN_16BPP 0x8410
#define DP_CHAIN_24BPP 0x8080
#define DP_CHAIN_32BPP 0x8080
/* DP_PIX_WIDTH register constants */
#define DST_1BPP 0
#define DST_4BPP 1
#define DST_8BPP 2
#define DST_15BPP 3
#define DST_16BPP 4
#define DST_32BPP 6
#define SRC_1BPP 0
#define SRC_4BPP 0x100
#define SRC_8BPP 0x200
#define SRC_15BPP 0x300
#define SRC_16BPP 0x400
#define SRC_32BPP 0x600
#define HOST_1BPP 0
#define HOST_4BPP 0x10000
#define HOST_8BPP 0x20000
#define HOST_15BPP 0x30000
#define HOST_16BPP 0x40000
#define HOST_32BPP 0x60000
#define BYTE_ORDER_MSB_TO_LSB 0
#define BYTE_ORDER_LSB_TO_MSB 0x1000000
/* DP_SRC register constants */
#define BKGD_SRC_BKGD_CLR 0
#define BKGD_SRC_FRGD_CLR 1
#define BKGD_SRC_HOST 2
#define BKGD_SRC_BLIT 3
#define BKGD_SRC_PATTERN 4
#define FRGD_SRC_BKGD_CLR 0
#define FRGD_SRC_FRGD_CLR 0x100
#define FRGD_SRC_HOST 0x200
#define FRGD_SRC_BLIT 0x300
#define FRGD_SRC_PATTERN 0x400
#define MONO_SRC_ONE 0
#define MONO_SRC_PATTERN 0x10000
#define MONO_SRC_HOST 0x20000
#define MONO_SRC_BLIT 0x30000
/* PCI IDs */
#define ATI_VENDOR 0x1002
#define ATI_MACH64_CT 0x4354 /* Mach64 CT */
#define ATI_RAGE_PRO_AGP 0x4742 /* 3D Rage Pro (AGP) */
#define ATI_RAGE_PRO_AGP1X 0x4744 /* 3D Rage Pro (AGP 1x) */
#define ATI_RAGE_PRO_PCI_B 0x4749 /* 3D Rage Pro Turbo */
#define ATI_RAGE_XC_PCI66 0x474c /* Rage XC (PCI66) */
#define ATI_RAGE_XL_AGP 0x474d /* Rage XL (AGP) */
#define ATI_RAGE_XC_AGP 0x474e /* Rage XC (AGP) */
#define ATI_RAGE_XL_PCI66 0x474f /* Rage XL (PCI66) */
#define ATI_RAGE_PRO_PCI_P 0x4750 /* 3D Rage Pro */
#define ATI_RAGE_PRO_PCI_L 0x4751 /* 3D Rage Pro (limited 3D) */
#define ATI_RAGE_XL_PCI 0x4752 /* Rage XL */
#define ATI_RAGE_XC_PCI 0x4753 /* Rage XC */
#define ATI_RAGE_II 0x4754 /* 3D Rage I/II */
#define ATI_RAGE_IIP 0x4755 /* 3D Rage II+ */
#define ATI_RAGE_IIC_PCI 0x4756 /* 3D Rage IIC */
#define ATI_RAGE_IIC_AGP_B 0x4757 /* 3D Rage IIC (AGP) */
#define ATI_RAGE_IIC_AGP_P 0x475a /* 3D Rage IIC (AGP) */
#define ATI_RAGE_LT_PRO_AGP 0x4c42 /* 3D Rage LT Pro (AGP 133MHz) */
#define ATI_RAGE_MOB_M3_PCI 0x4c45 /* Rage Mobility M3 */
#define ATI_RAGE_MOB_M3_AGP 0x4c46 /* Rage Mobility M3 (AGP) */
#define ATI_RAGE_LT 0x4c47 /* 3D Rage LT */
#define ATI_RAGE_LT_PRO_PCI 0x4c49 /* 3D Rage LT Pro */
#define ATI_RAGE_MOBILITY 0x4c4d /* Rage Mobility */
#define ATI_RAGE_L_MOBILITY 0x4c4e /* Rage L Mobility */
#define ATI_RAGE_LT_PRO 0x4c50 /* 3D Rage LT Pro */
#define ATI_RAGE_LT_PRO2 0x4c51 /* 3D Rage LT Pro */
#define ATI_RAGE_MOB_M1_PCI 0x4c52 /* Rage Mobility M1 (PCI) */
#define ATI_RAGE_L_MOB_M1_PCI 0x4c53 /* Rage L Mobility (PCI) */
#define ATI_MACH64_VT 0x5654 /* Mach64 VT */
#define ATI_MACH64_VTB 0x5655 /* Mach64 VTB */
#define ATI_MACH64_VT4 0x5656 /* Mach64 VT4 */
#endif /* !_DEV_FB_MACHFB_H_ */