freebsd-dev/sys/dev/coretemp/coretemp.c
Norikatsu Shigemura 3705c38487 Change 'dev.cpu.N.temperature', sysctl I (degC) to IK (Kelvin).
Approved by:	re (rwatson)
Reviewed by:	rpaulo
Suggested by:	ume
MFC After:	3 days
2009-09-06 12:01:29 +00:00

292 lines
7.5 KiB
C

/*-
* Copyright (c) 2007, 2008 Rui Paulo <rpaulo@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Device driver for Intel's On Die thermal sensor via MSR.
* First introduced in Intel's Core line of processors.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/bus.h>
#include <sys/systm.h>
#include <sys/types.h>
#include <sys/module.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <sys/sysctl.h>
#include <sys/proc.h> /* for curthread */
#include <sys/sched.h>
#include <machine/specialreg.h>
#include <machine/cpufunc.h>
#include <machine/cputypes.h>
#include <machine/md_var.h>
#define TZ_ZEROC 2732
struct coretemp_softc {
device_t sc_dev;
int sc_tjmax;
struct sysctl_oid *sc_oid;
};
/*
* Device methods.
*/
static void coretemp_identify(driver_t *driver, device_t parent);
static int coretemp_probe(device_t dev);
static int coretemp_attach(device_t dev);
static int coretemp_detach(device_t dev);
static int coretemp_get_temp(device_t dev);
static int coretemp_get_temp_sysctl(SYSCTL_HANDLER_ARGS);
static device_method_t coretemp_methods[] = {
/* Device interface */
DEVMETHOD(device_identify, coretemp_identify),
DEVMETHOD(device_probe, coretemp_probe),
DEVMETHOD(device_attach, coretemp_attach),
DEVMETHOD(device_detach, coretemp_detach),
{0, 0}
};
static driver_t coretemp_driver = {
"coretemp",
coretemp_methods,
sizeof(struct coretemp_softc),
};
static devclass_t coretemp_devclass;
DRIVER_MODULE(coretemp, cpu, coretemp_driver, coretemp_devclass, NULL, NULL);
static void
coretemp_identify(driver_t *driver, device_t parent)
{
device_t child;
u_int regs[4];
/* Make sure we're not being doubly invoked. */
if (device_find_child(parent, "coretemp", -1) != NULL)
return;
/* Check that CPUID 0x06 is supported and the vendor is Intel.*/
if (cpu_high < 6 || cpu_vendor_id != CPU_VENDOR_INTEL)
return;
/*
* CPUID 0x06 returns 1 if the processor has on-die thermal
* sensors. EBX[0:3] contains the number of sensors.
*/
do_cpuid(0x06, regs);
if ((regs[0] & 0x1) != 1)
return;
/*
* We add a child for each CPU since settings must be performed
* on each CPU in the SMP case.
*/
child = device_add_child(parent, "coretemp", -1);
if (child == NULL)
device_printf(parent, "add coretemp child failed\n");
}
static int
coretemp_probe(device_t dev)
{
if (resource_disabled("coretemp", 0))
return (ENXIO);
device_set_desc(dev, "CPU On-Die Thermal Sensors");
return (BUS_PROBE_GENERIC);
}
static int
coretemp_attach(device_t dev)
{
struct coretemp_softc *sc = device_get_softc(dev);
device_t pdev;
uint64_t msr;
int cpu_model;
int cpu_mask;
sc->sc_dev = dev;
pdev = device_get_parent(dev);
cpu_model = (cpu_id >> 4) & 15;
/* extended model */
cpu_model += ((cpu_id >> 16) & 0xf) << 4;
cpu_mask = cpu_id & 15;
/*
* Some CPUs, namely the PIII, don't have thermal sensors, but
* report them when the CPUID check is performed in
* coretemp_identify(). This leads to a later GPF when the sensor
* is queried via a MSR, so we stop here.
*/
if (cpu_model < 0xe)
return (ENXIO);
#if 0 /*
* XXXrpaulo: I have this CPU model and when it returns from C3
* coretemp continues to function properly.
*/
/*
* Check for errata AE18.
* "Processor Digital Thermal Sensor (DTS) Readout stops
* updating upon returning from C3/C4 state."
*
* Adapted from the Linux coretemp driver.
*/
if (cpu_model == 0xe && cpu_mask < 0xc) {
msr = rdmsr(MSR_BIOS_SIGN);
msr = msr >> 32;
if (msr < 0x39) {
device_printf(dev, "not supported (Intel errata "
"AE18), try updating your BIOS\n");
return (ENXIO);
}
}
#endif
/*
* On some Core 2 CPUs, there's an undocumented MSR that
* can tell us if Tj(max) is 100 or 85.
*
* The if-clause for CPUs having the MSR_IA32_EXT_CONFIG was adapted
* from the Linux coretemp driver.
*/
sc->sc_tjmax = 100;
if ((cpu_model == 0xf && cpu_mask >= 2) || cpu_model == 0xe) {
msr = rdmsr(MSR_IA32_EXT_CONFIG);
if (msr & (1 << 30))
sc->sc_tjmax = 85;
}
/*
* Add the "temperature" MIB to dev.cpu.N.
*/
sc->sc_oid = SYSCTL_ADD_PROC(device_get_sysctl_ctx(pdev),
SYSCTL_CHILDREN(device_get_sysctl_tree(pdev)),
OID_AUTO, "temperature",
CTLTYPE_INT | CTLFLAG_RD,
dev, 0, coretemp_get_temp_sysctl, "IK",
"Current temperature");
return (0);
}
static int
coretemp_detach(device_t dev)
{
struct coretemp_softc *sc = device_get_softc(dev);
sysctl_remove_oid(sc->sc_oid, 1, 0);
return (0);
}
static int
coretemp_get_temp(device_t dev)
{
uint64_t msr;
int temp;
int cpu = device_get_unit(dev);
struct coretemp_softc *sc = device_get_softc(dev);
char stemp[16];
thread_lock(curthread);
sched_bind(curthread, cpu);
thread_unlock(curthread);
/*
* The digital temperature reading is located at bit 16
* of MSR_THERM_STATUS.
*
* There is a bit on that MSR that indicates whether the
* temperature is valid or not.
*
* The temperature is computed by subtracting the temperature
* reading by Tj(max).
*/
msr = rdmsr(MSR_THERM_STATUS);
thread_lock(curthread);
sched_unbind(curthread);
thread_unlock(curthread);
/*
* Check for Thermal Status and Thermal Status Log.
*/
if ((msr & 0x3) == 0x3)
device_printf(dev, "PROCHOT asserted\n");
/*
* Bit 31 contains "Reading valid"
*/
if (((msr >> 31) & 0x1) == 1) {
/*
* Starting on bit 16 and ending on bit 22.
*/
temp = sc->sc_tjmax - ((msr >> 16) & 0x7f);
} else
temp = -1;
/*
* Check for Critical Temperature Status and Critical
* Temperature Log.
* It doesn't really matter if the current temperature is
* invalid because the "Critical Temperature Log" bit will
* tell us if the Critical Temperature has been reached in
* past. It's not directly related to the current temperature.
*
* If we reach a critical level, allow devctl(4) to catch this
* and shutdown the system.
*/
if (((msr >> 4) & 0x3) == 0x3) {
device_printf(dev, "critical temperature detected, "
"suggest system shutdown\n");
snprintf(stemp, sizeof(stemp), "%d", temp);
devctl_notify("coretemp", "Thermal", stemp, "notify=0xcc");
}
return (temp);
}
static int
coretemp_get_temp_sysctl(SYSCTL_HANDLER_ARGS)
{
device_t dev = (device_t) arg1;
int temp;
temp = coretemp_get_temp(dev) * 10 + TZ_ZEROC;
return (sysctl_handle_int(oidp, &temp, 0, req));
}