freebsd-dev/sys/cam/ctl/ctl_io.h
Alexander Motin 7b6660c9aa Remove CTL_PRIV_LBA_LEN from HA messages.
Previously it was used for statistics, but now just a 16 extra bytes.
2015-09-14 09:56:01 +00:00

544 lines
16 KiB
C

/*-
* Copyright (c) 2003 Silicon Graphics International Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
* $Id: //depot/users/kenm/FreeBSD-test2/sys/cam/ctl/ctl_io.h#5 $
* $FreeBSD$
*/
/*
* CAM Target Layer data movement structures/interface.
*
* Author: Ken Merry <ken@FreeBSD.org>
*/
#ifndef _CTL_IO_H_
#define _CTL_IO_H_
#ifdef _CTL_C
#define EXTERN(__var,__val) __var = __val
#else
#define EXTERN(__var,__val) extern __var
#endif
#define CTL_MAX_CDBLEN 32
/*
* Uncomment this next line to enable printing out times for I/Os
* that take longer than CTL_TIME_IO_SECS seconds to get to the datamove
* and/or done stage.
*/
#define CTL_TIME_IO
#ifdef CTL_TIME_IO
#define CTL_TIME_IO_DEFAULT_SECS 90
EXTERN(int ctl_time_io_secs, CTL_TIME_IO_DEFAULT_SECS);
#endif
/*
* Uncomment this next line to enable the CTL I/O delay feature. You
* can delay I/O at two different points -- datamove and done. This is
* useful for diagnosing abort conditions (for hosts that send an abort on a
* timeout), and for determining how long a host's timeout is.
*/
//#define CTL_IO_DELAY
typedef enum {
CTL_STATUS_NONE, /* No status */
CTL_SUCCESS, /* Transaction completed successfully */
CTL_CMD_TIMEOUT, /* Command timed out, shouldn't happen here */
CTL_SEL_TIMEOUT, /* Selection timeout, shouldn't happen here */
CTL_ERROR, /* General CTL error XXX expand on this? */
CTL_SCSI_ERROR, /* SCSI error, look at status byte/sense data */
CTL_CMD_ABORTED, /* Command aborted, don't return status */
CTL_STATUS_MASK = 0xfff,/* Mask off any status flags */
CTL_AUTOSENSE = 0x1000 /* Autosense performed */
} ctl_io_status;
/*
* WARNING: Keep the data in/out/none flags where they are. They're used
* in conjuction with ctl_cmd_flags. See comment above ctl_cmd_flags
* definition in ctl_private.h.
*/
typedef enum {
CTL_FLAG_NONE = 0x00000000, /* no flags */
CTL_FLAG_DATA_IN = 0x00000001, /* DATA IN */
CTL_FLAG_DATA_OUT = 0x00000002, /* DATA OUT */
CTL_FLAG_DATA_NONE = 0x00000003, /* no data */
CTL_FLAG_DATA_MASK = 0x00000003,
CTL_FLAG_KDPTR_SGLIST = 0x00000008, /* kern_data_ptr is S/G list*/
CTL_FLAG_EDPTR_SGLIST = 0x00000010, /* ext_data_ptr is S/G list */
CTL_FLAG_DO_AUTOSENSE = 0x00000020, /* grab sense info */
CTL_FLAG_USER_REQ = 0x00000040, /* request came from userland */
CTL_FLAG_ALLOCATED = 0x00000100, /* data space allocated */
CTL_FLAG_BLOCKED = 0x00000200, /* on the blocked queue */
CTL_FLAG_ABORT_STATUS = 0x00000400, /* return TASK ABORTED status */
CTL_FLAG_ABORT = 0x00000800, /* this I/O should be aborted */
CTL_FLAG_DMA_INPROG = 0x00001000, /* DMA in progress */
CTL_FLAG_DELAY_DONE = 0x00004000, /* delay injection done */
CTL_FLAG_INT_COPY = 0x00008000, /* internal copy, no done call*/
CTL_FLAG_SENT_2OTHER_SC = 0x00010000,
CTL_FLAG_FROM_OTHER_SC = 0x00020000,
CTL_FLAG_IS_WAS_ON_RTR = 0x00040000, /* Don't rerun cmd on failover*/
CTL_FLAG_BUS_ADDR = 0x00080000, /* ctl_sglist contains BUS
addresses, not virtual ones*/
CTL_FLAG_IO_CONT = 0x00100000, /* Continue I/O instead of
completing */
#if 0
CTL_FLAG_ALREADY_DONE = 0x00200000 /* I/O already completed */
#endif
CTL_FLAG_NO_DATAMOVE = 0x00400000,
CTL_FLAG_DMA_QUEUED = 0x00800000, /* DMA queued but not started*/
CTL_FLAG_STATUS_QUEUED = 0x01000000, /* Status queued but not sent*/
CTL_FLAG_FAILOVER = 0x04000000, /* Killed by a failover */
CTL_FLAG_IO_ACTIVE = 0x08000000, /* I/O active on this SC */
CTL_FLAG_STATUS_SENT = 0x10000000 /* Status sent by datamove */
} ctl_io_flags;
struct ctl_lba_len {
uint64_t lba;
uint32_t len;
};
struct ctl_lba_len_flags {
uint64_t lba;
uint32_t len;
uint32_t flags;
#define CTL_LLF_FUA 0x04000000
#define CTL_LLF_DPO 0x08000000
#define CTL_LLF_READ 0x10000000
#define CTL_LLF_WRITE 0x20000000
#define CTL_LLF_VERIFY 0x40000000
#define CTL_LLF_COMPARE 0x80000000
};
struct ctl_ptr_len_flags {
uint8_t *ptr;
uint32_t len;
uint32_t flags;
};
union ctl_priv {
uint8_t bytes[sizeof(uint64_t) * 2];
uint64_t integer;
void *ptr;
};
/*
* Number of CTL private areas.
*/
#define CTL_NUM_PRIV 6
/*
* Which private area are we using for a particular piece of data?
*/
#define CTL_PRIV_LUN 0 /* CTL LUN pointer goes here */
#define CTL_PRIV_LBA_LEN 1 /* Decoded LBA/len for read/write*/
#define CTL_PRIV_MODEPAGE 1 /* Modepage info for config write */
#define CTL_PRIV_BACKEND 2 /* Reserved for block, RAIDCore */
#define CTL_PRIV_BACKEND_LUN 3 /* Backend LUN pointer */
#define CTL_PRIV_FRONTEND 4 /* Frontend storage */
#define CTL_PRIV_FRONTEND2 5 /* Another frontend storage */
#define CTL_INVALID_PORTNAME 0xFF
#define CTL_UNMAPPED_IID 0xFF
struct ctl_sg_entry {
void *addr;
size_t len;
};
typedef enum {
CTL_IO_NONE,
CTL_IO_SCSI,
CTL_IO_TASK,
} ctl_io_type;
struct ctl_nexus {
uint32_t initid; /* Initiator ID */
uint32_t targ_port; /* Target port, filled in by PORT */
uint32_t targ_lun; /* Destination lun */
uint32_t targ_mapped_lun; /* Destination lun CTL-wide */
};
typedef enum {
CTL_MSG_SERIALIZE,
CTL_MSG_R2R,
CTL_MSG_FINISH_IO,
CTL_MSG_BAD_JUJU,
CTL_MSG_MANAGE_TASKS,
CTL_MSG_PERS_ACTION,
CTL_MSG_DATAMOVE,
CTL_MSG_DATAMOVE_DONE,
CTL_MSG_UA, /* Set/clear UA on secondary. */
CTL_MSG_PORT_SYNC, /* Information about port. */
CTL_MSG_LUN_SYNC, /* Information about LUN. */
CTL_MSG_FAILOVER /* Fake, never sent though the wire */
} ctl_msg_type;
struct ctl_scsiio;
struct ctl_io_hdr {
uint32_t version; /* interface version XXX */
ctl_io_type io_type; /* task I/O, SCSI I/O, etc. */
ctl_msg_type msg_type;
struct ctl_nexus nexus; /* Initiator, port, target, lun */
uint32_t iid_indx; /* the index into the iid mapping */
uint32_t flags; /* transaction flags */
uint32_t status; /* transaction status */
uint32_t port_status; /* trans status, set by PORT, 0 = good*/
uint32_t timeout; /* timeout in ms */
uint32_t retries; /* retry count */
#ifdef CTL_IO_DELAY
struct callout delay_callout;
#endif /* CTL_IO_DELAY */
#ifdef CTL_TIME_IO
time_t start_time; /* I/O start time */
struct bintime start_bt; /* Timer start ticks */
struct bintime dma_start_bt; /* DMA start ticks */
struct bintime dma_bt; /* DMA total ticks */
uint32_t num_dmas; /* Number of DMAs */
#endif /* CTL_TIME_IO */
union ctl_io *original_sc;
union ctl_io *serializing_sc;
void *pool; /* I/O pool */
union ctl_priv ctl_private[CTL_NUM_PRIV];/* CTL private area */
struct ctl_sg_entry *remote_sglist;
struct ctl_sg_entry *local_sglist;
STAILQ_ENTRY(ctl_io_hdr) links; /* linked list pointer */
TAILQ_ENTRY(ctl_io_hdr) ooa_links;
TAILQ_ENTRY(ctl_io_hdr) blocked_links;
};
typedef enum {
CTL_TAG_UNTAGGED,
CTL_TAG_SIMPLE,
CTL_TAG_ORDERED,
CTL_TAG_HEAD_OF_QUEUE,
CTL_TAG_ACA
} ctl_tag_type;
union ctl_io;
/*
* SCSI passthrough I/O structure for the CAM Target Layer. Note
* that some of these fields are here for completeness, but they aren't
* used in the CTL implementation. e.g., timeout and retries won't be
* used.
*
* Note: Make sure the io_hdr is *always* the first element in this
* structure.
*/
struct ctl_scsiio {
struct ctl_io_hdr io_hdr; /* common to all I/O types */
/*
* The ext_* fields are generally intended for frontend use; CTL itself
* doesn't modify or use them.
*/
uint32_t ext_sg_entries; /* 0 = no S/G list, > 0 = num entries */
uint8_t *ext_data_ptr; /* data buffer or S/G list */
uint32_t ext_data_len; /* Data transfer length */
uint32_t ext_data_filled; /* Amount of data filled so far */
/*
* The number of scatter/gather entries in the list pointed to
* by kern_data_ptr. 0 means there is no list, just a data pointer.
*/
uint32_t kern_sg_entries;
uint32_t rem_sg_entries; /* Unused. */
/*
* The data pointer or a pointer to the scatter/gather list.
*/
uint8_t *kern_data_ptr;
/*
* Length of the data buffer or scatter/gather list. It's also
* the length of this particular piece of the data transfer,
* ie. number of bytes expected to be transferred by the current
* invocation of frontend's datamove() callback. It's always
* less than or equal to kern_total_len.
*/
uint32_t kern_data_len;
/*
* Total length of data to be transferred during this particular
* SCSI command, as decoded from SCSI CDB.
*/
uint32_t kern_total_len;
/*
* Amount of data left after the current data transfer.
*/
uint32_t kern_data_resid;
/*
* Byte offset of this transfer, equal to the amount of data
* already transferred for this SCSI command during previous
* datamove() invocations.
*/
uint32_t kern_rel_offset;
struct scsi_sense_data sense_data; /* sense data */
uint8_t sense_len; /* Returned sense length */
uint8_t scsi_status; /* SCSI status byte */
uint8_t sense_residual; /* Unused. */
uint32_t residual; /* data residual length */
uint32_t tag_num; /* tag number */
ctl_tag_type tag_type; /* simple, ordered, head of queue,etc.*/
uint8_t cdb_len; /* CDB length */
uint8_t cdb[CTL_MAX_CDBLEN]; /* CDB */
int (*be_move_done)(union ctl_io *io); /* called by fe */
int (*io_cont)(union ctl_io *io); /* to continue processing */
};
typedef enum {
CTL_TASK_ABORT_TASK,
CTL_TASK_ABORT_TASK_SET,
CTL_TASK_CLEAR_ACA,
CTL_TASK_CLEAR_TASK_SET,
CTL_TASK_I_T_NEXUS_RESET,
CTL_TASK_LUN_RESET,
CTL_TASK_TARGET_RESET,
CTL_TASK_BUS_RESET,
CTL_TASK_PORT_LOGIN,
CTL_TASK_PORT_LOGOUT,
CTL_TASK_QUERY_TASK,
CTL_TASK_QUERY_TASK_SET,
CTL_TASK_QUERY_ASYNC_EVENT
} ctl_task_type;
typedef enum {
CTL_TASK_FUNCTION_COMPLETE,
CTL_TASK_FUNCTION_SUCCEEDED,
CTL_TASK_FUNCTION_REJECTED,
CTL_TASK_LUN_DOES_NOT_EXIST,
CTL_TASK_FUNCTION_NOT_SUPPORTED
} ctl_task_status;
/*
* Task management I/O structure. Aborts, bus resets, etc., are sent using
* this structure.
*
* Note: Make sure the io_hdr is *always* the first element in this
* structure.
*/
struct ctl_taskio {
struct ctl_io_hdr io_hdr; /* common to all I/O types */
ctl_task_type task_action; /* Target Reset, Abort, etc. */
uint32_t tag_num; /* tag number */
ctl_tag_type tag_type; /* simple, ordered, etc. */
uint8_t task_status; /* Complete, Succeeded, etc. */
uint8_t task_resp[3];/* Response information */
};
typedef enum {
CTL_PR_REG_KEY,
CTL_PR_UNREG_KEY,
CTL_PR_PREEMPT,
CTL_PR_CLEAR,
CTL_PR_RESERVE,
CTL_PR_RELEASE
} ctl_pr_action;
/*
* The PR info is specifically for sending Persistent Reserve actions
* to the other SC which it must also act on.
*
* Note: Make sure the io_hdr is *always* the first element in this
* structure.
*/
struct ctl_pr_info {
ctl_pr_action action;
uint8_t sa_res_key[8];
uint8_t res_type;
uint32_t residx;
};
struct ctl_ha_msg_hdr {
ctl_msg_type msg_type;
union ctl_io *original_sc;
union ctl_io *serializing_sc;
struct ctl_nexus nexus; /* Initiator, port, target, lun */
uint32_t status; /* transaction status */
};
#define CTL_HA_MAX_SG_ENTRIES 16
#define CTL_HA_DATAMOVE_SEGMENT 131072
/*
* Used for CTL_MSG_PERS_ACTION.
*/
struct ctl_ha_msg_pr {
struct ctl_ha_msg_hdr hdr;
struct ctl_pr_info pr_info;
};
/*
* Used for CTL_MSG_UA.
*/
struct ctl_ha_msg_ua {
struct ctl_ha_msg_hdr hdr;
int ua_all;
int ua_set;
int ua_type;
};
/*
* The S/G handling here is a little different than the standard ctl_scsiio
* structure, because we can't pass data by reference in between controllers.
* The S/G list in the ctl_scsiio struct is normally passed in the
* kern_data_ptr field. So kern_sg_entries here will always be non-zero,
* even if there is only one entry.
*
* Used for CTL_MSG_DATAMOVE.
*/
struct ctl_ha_msg_dt {
struct ctl_ha_msg_hdr hdr;
ctl_io_flags flags; /* Only I/O flags are used here */
uint32_t sg_sequence; /* S/G portion number */
uint8_t sg_last; /* last S/G batch = 1 */
uint32_t sent_sg_entries; /* previous S/G count */
uint32_t cur_sg_entries; /* current S/G entries */
uint32_t kern_sg_entries; /* total S/G entries */
uint32_t kern_data_len; /* Length of this S/G list */
uint32_t kern_total_len; /* Total length of this
transaction */
uint32_t kern_data_resid; /* Length left to transfer
after this*/
uint32_t kern_rel_offset; /* Byte Offset of this
transfer */
struct ctl_sg_entry sg_list[CTL_HA_MAX_SG_ENTRIES];
};
/*
* Used for CTL_MSG_SERIALIZE, CTL_MSG_FINISH_IO, CTL_MSG_BAD_JUJU.
*/
struct ctl_ha_msg_scsi {
struct ctl_ha_msg_hdr hdr;
uint32_t tag_num; /* tag number */
ctl_tag_type tag_type; /* simple, ordered, etc. */
uint8_t cdb[CTL_MAX_CDBLEN]; /* CDB */
uint8_t cdb_len; /* CDB length */
uint8_t scsi_status; /* SCSI status byte */
uint8_t sense_len; /* Returned sense length */
uint8_t sense_residual; /* sense residual length */
uint32_t residual; /* data residual length */
uint32_t fetd_status; /* trans status, set by FETD,
0 = good*/
struct scsi_sense_data sense_data; /* sense data */
};
/*
* Used for CTL_MSG_MANAGE_TASKS.
*/
struct ctl_ha_msg_task {
struct ctl_ha_msg_hdr hdr;
ctl_task_type task_action; /* Target Reset, Abort, etc. */
uint32_t tag_num; /* tag number */
ctl_tag_type tag_type; /* simple, ordered, etc. */
};
/*
* Used for CTL_MSG_PORT_SYNC.
*/
struct ctl_ha_msg_port {
struct ctl_ha_msg_hdr hdr;
int port_type;
int physical_port;
int virtual_port;
int status;
int name_len;
int lun_map_len;
int port_devid_len;
int target_devid_len;
uint8_t data[];
};
/*
* Used for CTL_MSG_LUN_SYNC.
*/
struct ctl_ha_msg_lun {
struct ctl_ha_msg_hdr hdr;
int flags;
unsigned int pr_generation;
uint32_t pr_res_idx;
uint8_t pr_res_type;
int lun_devid_len;
int pr_key_count;
uint8_t data[];
};
struct ctl_ha_msg_lun_pr_key {
uint32_t pr_iid;
uint64_t pr_key;
};
union ctl_ha_msg {
struct ctl_ha_msg_hdr hdr;
struct ctl_ha_msg_task task;
struct ctl_ha_msg_scsi scsi;
struct ctl_ha_msg_dt dt;
struct ctl_ha_msg_pr pr;
struct ctl_ha_msg_ua ua;
struct ctl_ha_msg_port port;
struct ctl_ha_msg_lun lun;
};
struct ctl_prio {
struct ctl_io_hdr io_hdr;
struct ctl_ha_msg_pr pr_msg;
};
union ctl_io {
struct ctl_io_hdr io_hdr; /* common to all I/O types */
struct ctl_scsiio scsiio; /* Normal SCSI commands */
struct ctl_taskio taskio; /* SCSI task management/reset */
struct ctl_prio presio; /* update per. res info on other SC */
};
#ifdef _KERNEL
union ctl_io *ctl_alloc_io(void *pool_ref);
union ctl_io *ctl_alloc_io_nowait(void *pool_ref);
void ctl_free_io(union ctl_io *io);
void ctl_zero_io(union ctl_io *io);
void ctl_copy_io(union ctl_io *src, union ctl_io *dest);
#endif /* _KERNEL */
#endif /* _CTL_IO_H_ */
/*
* vim: ts=8
*/