Paul Saab e53d81eee9 Add support for the BCM5750/5751. Unfortunately the documentation ... I have from Broadcom does not give much information on these devices, so the Broadcom Linux driver was used for clues to what these chips support. It turns out they are similar to the 5705 with the 5751 being the PCI-Express version and needing special work-arounds and settings.		2004-09-24 22:24:33 +00:00
..
acphy.c	Remove double __FBSDID and move the remaining one into a common place after	2004-05-29 18:09:10 +00:00
acphyreg.h
amphy.c	Add some missing <sys/module.h> includes which are masked by the	2004-05-30 17:57:46 +00:00
amphyreg.h
bmtphy.c	Add some missing <sys/module.h> includes which are masked by the	2004-05-30 17:57:46 +00:00
bmtphyreg.h
brgphy.c	Add support for the BCM5750/5751. Unfortunately the documentation	2004-09-24 22:24:33 +00:00
brgphyreg.h	Fix bge at 10Mbit. The defines for 10-Half and 10-Full were swapped.	2003-06-17 15:02:28 +00:00
ciphy.c	Add device driver support for the VIA Networking Technologies	2004-09-10 20:57:46 +00:00
ciphyreg.h	Add device driver support for the VIA Networking Technologies	2004-09-10 20:57:46 +00:00
dcphy.c	Spelling fix in a comment.	2004-05-29 18:13:44 +00:00
e1000phy.c	Add some missing <sys/module.h> includes which are masked by the	2004-05-30 17:57:46 +00:00
e1000phyreg.h	Add support for SK-9521 V2.0 and 3COM 3C940.	2003-09-20 10:53:08 +00:00
exphy.c	Remove double __FBSDID and move the remaining one into a common place after	2004-05-29 18:09:10 +00:00
inphy.c	Add some missing <sys/module.h> includes which are masked by the	2004-05-30 17:57:46 +00:00
inphyreg.h
lxtphy.c	Remove double __FBSDID and move the remaining one into a common place after	2004-05-29 18:09:10 +00:00
lxtphyreg.h
mii_physubr.c	Remove double __FBSDID and move the remaining one into a common place after	2004-05-29 18:09:10 +00:00
mii.c	Add locking to the kqueue subsystem. This also makes the kqueue subsystem	2004-08-15 06:24:42 +00:00
mii.h
miibus_if.m
miidevs	Add support for the BCM5750/5751. Unfortunately the documentation	2004-09-24 22:24:33 +00:00
miivar.h
mlphy.c	Correct the phy_service() routine case MII_TICK to correctly track	2004-05-03 13:01:34 +00:00
nsgphy.c	Add some missing <sys/module.h> includes which are masked by the	2004-05-30 17:57:46 +00:00
nsgphyreg.h
nsphy.c	DP83840A on hme(4) don't advertise their media capabilities themselves	2004-05-29 18:23:26 +00:00
nsphyreg.h
pnaphy.c	Remove double __FBSDID and move the remaining one into a common place after	2004-05-29 18:09:10 +00:00
pnphy.c	Remove double __FBSDID and move the remaining one into a common place after	2004-05-29 18:09:10 +00:00
qsphy.c	Remove double __FBSDID and move the remaining one into a common place after	2004-05-29 18:09:10 +00:00
qsphyreg.h
rgephy.c	Add some missing <sys/module.h> includes which are masked by the	2004-05-30 17:57:46 +00:00
rgephyreg.h	Add a PHY driver to support the built-in gigE PHY in the 8169S/8110S	2003-09-11 03:53:46 +00:00
rlphy.c	Add some missing <sys/module.h> includes which are masked by the	2004-05-30 17:57:46 +00:00
ruephy.c	Add some missing <sys/module.h> includes which are masked by the	2004-05-30 17:57:46 +00:00
ruephyreg.h	Add RealTek RTL8150 USB to fast Ethernet controller driver.	2003-05-03 10:16:56 +00:00
tdkphy.c	Remove double __FBSDID and move the remaining one into a common place after	2004-05-29 18:09:10 +00:00
tdkphyreg.h
tlphy.c	Remove double __FBSDID and move the remaining one into a common place after	2004-05-29 18:09:10 +00:00
tlphyreg.h
ukphy_subr.c	Remove double __FBSDID and move the remaining one into a common place after	2004-05-29 18:09:10 +00:00
ukphy.c	Remove double __FBSDID and move the remaining one into a common place after	2004-05-29 18:09:10 +00:00
xmphy.c	Add some missing <sys/module.h> includes which are masked by the	2004-05-30 17:57:46 +00:00
xmphyreg.h