1dae40eb49
to getting rid u_int for uint and so on). b) Turn back on 64 bit DAC support. Cheeze it a bit in that we have two DMA callback functions- one when we have bus_addr_t > 4 bits in width and the other which should be normal. Even Cheezier in that we turn off setting up DMA maps to be BUS_SPACE_MAXADDR if we're in ISP_TARGET_MODE. More work on this in a week or so. c) Tested under amd64 and 1MB DFLTPHYS, sparc64, i386 (PAE, but insufficient memory to really test > 4GB). LINT check under amd64. MFC after: 1 month
888 lines
30 KiB
C
888 lines
30 KiB
C
/* $FreeBSD$ */
|
|
/*-
|
|
* Soft Definitions for for Qlogic ISP SCSI adapters.
|
|
*
|
|
* Copyright (c) 1997-2006 by Matthew Jacob
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice immediately at the beginning of the file, without modification,
|
|
* this list of conditions, and the following disclaimer.
|
|
* 2. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef _ISPVAR_H
|
|
#define _ISPVAR_H
|
|
|
|
#if defined(__NetBSD__) || defined(__OpenBSD__)
|
|
#include <dev/ic/ispmbox.h>
|
|
#endif
|
|
#ifdef __FreeBSD__
|
|
#include <dev/isp/ispmbox.h>
|
|
#endif
|
|
#ifdef __linux__
|
|
#include "ispmbox.h"
|
|
#endif
|
|
#ifdef __svr4__
|
|
#include "ispmbox.h"
|
|
#endif
|
|
|
|
#define ISP_CORE_VERSION_MAJOR 2
|
|
#define ISP_CORE_VERSION_MINOR 11
|
|
|
|
/*
|
|
* Vector for bus specific code to provide specific services.
|
|
*/
|
|
typedef struct ispsoftc ispsoftc_t;
|
|
struct ispmdvec {
|
|
int (*dv_rd_isr)
|
|
(ispsoftc_t *, uint16_t *, uint16_t *, uint16_t *);
|
|
uint16_t (*dv_rd_reg) (ispsoftc_t *, int);
|
|
void (*dv_wr_reg) (ispsoftc_t *, int, uint16_t);
|
|
int (*dv_mbxdma) (ispsoftc_t *);
|
|
int (*dv_dmaset)
|
|
(ispsoftc_t *, XS_T *, ispreq_t *, uint16_t *, uint16_t);
|
|
void (*dv_dmaclr) (ispsoftc_t *, XS_T *, uint16_t);
|
|
void (*dv_reset0) (ispsoftc_t *);
|
|
void (*dv_reset1) (ispsoftc_t *);
|
|
void (*dv_dregs) (ispsoftc_t *, const char *);
|
|
uint16_t *dv_ispfw; /* ptr to f/w */
|
|
uint16_t dv_conf1;
|
|
uint16_t dv_clock; /* clock frequency */
|
|
};
|
|
|
|
/*
|
|
* Overall parameters
|
|
*/
|
|
#define MAX_TARGETS 16
|
|
#define MAX_FC_TARG 256
|
|
#define ISP_MAX_TARGETS(isp) (IS_FC(isp)? MAX_FC_TARG : MAX_TARGETS)
|
|
#define ISP_MAX_LUNS(isp) (isp)->isp_maxluns
|
|
|
|
/*
|
|
* Macros to access ISP registers through bus specific layers-
|
|
* mostly wrappers to vector through the mdvec structure.
|
|
*/
|
|
#define ISP_READ_ISR(isp, isrp, semap, mbox0p) \
|
|
(*(isp)->isp_mdvec->dv_rd_isr)(isp, isrp, semap, mbox0p)
|
|
|
|
#define ISP_READ(isp, reg) \
|
|
(*(isp)->isp_mdvec->dv_rd_reg)((isp), (reg))
|
|
|
|
#define ISP_WRITE(isp, reg, val) \
|
|
(*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), (val))
|
|
|
|
#define ISP_MBOXDMASETUP(isp) \
|
|
(*(isp)->isp_mdvec->dv_mbxdma)((isp))
|
|
|
|
#define ISP_DMASETUP(isp, xs, req, iptrp, optr) \
|
|
(*(isp)->isp_mdvec->dv_dmaset)((isp), (xs), (req), (iptrp), (optr))
|
|
|
|
#define ISP_DMAFREE(isp, xs, hndl) \
|
|
if ((isp)->isp_mdvec->dv_dmaclr) \
|
|
(*(isp)->isp_mdvec->dv_dmaclr)((isp), (xs), (hndl))
|
|
|
|
#define ISP_RESET0(isp) \
|
|
if ((isp)->isp_mdvec->dv_reset0) (*(isp)->isp_mdvec->dv_reset0)((isp))
|
|
#define ISP_RESET1(isp) \
|
|
if ((isp)->isp_mdvec->dv_reset1) (*(isp)->isp_mdvec->dv_reset1)((isp))
|
|
#define ISP_DUMPREGS(isp, m) \
|
|
if ((isp)->isp_mdvec->dv_dregs) (*(isp)->isp_mdvec->dv_dregs)((isp),(m))
|
|
|
|
#define ISP_SETBITS(isp, reg, val) \
|
|
(*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), ISP_READ((isp), (reg)) | (val))
|
|
|
|
#define ISP_CLRBITS(isp, reg, val) \
|
|
(*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), ISP_READ((isp), (reg)) & ~(val))
|
|
|
|
/*
|
|
* The MEMORYBARRIER macro is defined per platform (to provide synchronization
|
|
* on Request and Response Queues, Scratch DMA areas, and Registers)
|
|
*
|
|
* Defined Memory Barrier Synchronization Types
|
|
*/
|
|
#define SYNC_REQUEST 0 /* request queue synchronization */
|
|
#define SYNC_RESULT 1 /* result queue synchronization */
|
|
#define SYNC_SFORDEV 2 /* scratch, sync for ISP */
|
|
#define SYNC_SFORCPU 3 /* scratch, sync for CPU */
|
|
#define SYNC_REG 4 /* for registers */
|
|
|
|
/*
|
|
* Request/Response Queue defines and macros.
|
|
* The maximum is defined per platform (and can be based on board type).
|
|
*/
|
|
/* This is the size of a queue entry (request and response) */
|
|
#define QENTRY_LEN 64
|
|
/* Both request and result queue length must be a power of two */
|
|
#define RQUEST_QUEUE_LEN(x) MAXISPREQUEST(x)
|
|
#ifdef ISP_TARGET_MODE
|
|
#define RESULT_QUEUE_LEN(x) MAXISPREQUEST(x)
|
|
#else
|
|
#define RESULT_QUEUE_LEN(x) \
|
|
(((MAXISPREQUEST(x) >> 2) < 64)? 64 : MAXISPREQUEST(x) >> 2)
|
|
#endif
|
|
#define ISP_QUEUE_ENTRY(q, idx) (((uint8_t *)q) + ((idx) * QENTRY_LEN))
|
|
#define ISP_QUEUE_SIZE(n) ((n) * QENTRY_LEN)
|
|
#define ISP_NXT_QENTRY(idx, qlen) (((idx) + 1) & ((qlen)-1))
|
|
#define ISP_QFREE(in, out, qlen) \
|
|
((in == out)? (qlen - 1) : ((in > out)? \
|
|
((qlen - 1) - (in - out)) : (out - in - 1)))
|
|
#define ISP_QAVAIL(isp) \
|
|
ISP_QFREE(isp->isp_reqidx, isp->isp_reqodx, RQUEST_QUEUE_LEN(isp))
|
|
|
|
#define ISP_ADD_REQUEST(isp, nxti) \
|
|
MEMORYBARRIER(isp, SYNC_REQUEST, isp->isp_reqidx, QENTRY_LEN); \
|
|
WRITE_REQUEST_QUEUE_IN_POINTER(isp, nxti); \
|
|
isp->isp_reqidx = nxti
|
|
|
|
/*
|
|
* SCSI Specific Host Adapter Parameters- per bus, per target
|
|
*/
|
|
typedef struct {
|
|
uint32_t isp_gotdparms : 1,
|
|
isp_req_ack_active_neg : 1,
|
|
isp_data_line_active_neg: 1,
|
|
isp_cmd_dma_burst_enable: 1,
|
|
isp_data_dma_burst_enabl: 1,
|
|
isp_fifo_threshold : 3,
|
|
isp_ultramode : 1,
|
|
isp_diffmode : 1,
|
|
isp_lvdmode : 1,
|
|
isp_fast_mttr : 1, /* fast sram */
|
|
isp_initiator_id : 4,
|
|
isp_async_data_setup : 4;
|
|
uint16_t isp_selection_timeout;
|
|
uint16_t isp_max_queue_depth;
|
|
uint8_t isp_tag_aging;
|
|
uint8_t isp_bus_reset_delay;
|
|
uint8_t isp_retry_count;
|
|
uint8_t isp_retry_delay;
|
|
struct {
|
|
uint32_t
|
|
exc_throttle : 8,
|
|
: 1,
|
|
dev_enable : 1, /* ignored */
|
|
dev_update : 1,
|
|
dev_refresh : 1,
|
|
actv_offset : 4,
|
|
goal_offset : 4,
|
|
nvrm_offset : 4;
|
|
uint8_t actv_period; /* current sync period */
|
|
uint8_t goal_period; /* goal sync period */
|
|
uint8_t nvrm_period; /* nvram sync period */
|
|
uint16_t actv_flags; /* current device flags */
|
|
uint16_t goal_flags; /* goal device flags */
|
|
uint16_t nvrm_flags; /* nvram device flags */
|
|
} isp_devparam[MAX_TARGETS];
|
|
} sdparam;
|
|
|
|
/*
|
|
* Device Flags
|
|
*/
|
|
#define DPARM_DISC 0x8000
|
|
#define DPARM_PARITY 0x4000
|
|
#define DPARM_WIDE 0x2000
|
|
#define DPARM_SYNC 0x1000
|
|
#define DPARM_TQING 0x0800
|
|
#define DPARM_ARQ 0x0400
|
|
#define DPARM_QFRZ 0x0200
|
|
#define DPARM_RENEG 0x0100
|
|
#define DPARM_NARROW 0x0080
|
|
#define DPARM_ASYNC 0x0040
|
|
#define DPARM_PPR 0x0020
|
|
#define DPARM_DEFAULT (0xFF00 & ~DPARM_QFRZ)
|
|
#define DPARM_SAFE_DFLT (DPARM_DEFAULT & ~(DPARM_WIDE|DPARM_SYNC|DPARM_TQING))
|
|
|
|
/* technically, not really correct, as they need to be rated based upon clock */
|
|
#define ISP_80M_SYNCPARMS 0x0c09
|
|
#define ISP_40M_SYNCPARMS 0x0c0a
|
|
#define ISP_20M_SYNCPARMS 0x0c0c
|
|
#define ISP_20M_SYNCPARMS_1040 0x080c
|
|
#define ISP_10M_SYNCPARMS 0x0c19
|
|
#define ISP_08M_SYNCPARMS 0x0c25
|
|
#define ISP_05M_SYNCPARMS 0x0c32
|
|
#define ISP_04M_SYNCPARMS 0x0c41
|
|
|
|
/*
|
|
* Fibre Channel Specifics
|
|
*/
|
|
#define FL_PORT_ID 0x7e /* FL_Port Special ID */
|
|
#define FC_PORT_ID 0x7f /* Fabric Controller Special ID */
|
|
#define FC_SNS_ID 0x80 /* SNS Server Special ID */
|
|
|
|
/* #define ISP_USE_GA_NXT 1 */ /* Use GA_NXT with switches */
|
|
#ifndef GA_NXT_MAX
|
|
#define GA_NXT_MAX 256
|
|
#endif
|
|
|
|
typedef struct {
|
|
uint32_t : 13,
|
|
isp_gbspeed : 3,
|
|
: 2,
|
|
isp_iid_set : 1,
|
|
loop_seen_once : 1,
|
|
isp_loopstate : 4, /* Current Loop State */
|
|
isp_fwstate : 3, /* ISP F/W state */
|
|
isp_gotdparms : 1,
|
|
isp_topo : 3,
|
|
isp_onfabric : 1;
|
|
uint32_t : 8,
|
|
isp_portid : 24; /* S_ID */
|
|
uint16_t isp_fwoptions;
|
|
uint16_t isp_iid; /* 'initiator' id */
|
|
uint16_t isp_loopid; /* hard loop id */
|
|
uint16_t isp_fwattr; /* firmware attributes */
|
|
uint8_t isp_execthrottle;
|
|
uint8_t isp_retry_delay;
|
|
uint8_t isp_retry_count;
|
|
uint8_t isp_reserved;
|
|
uint16_t isp_maxalloc;
|
|
uint16_t isp_maxfrmlen;
|
|
uint64_t isp_nodewwn;
|
|
uint64_t isp_portwwn;
|
|
/*
|
|
* Port Data Base. This is indexed by 'target', which is invariate.
|
|
* However, elements within can move around due to loop changes,
|
|
* so the actual loop ID passed to the F/W is in this structure.
|
|
* The first time the loop is seen up, loopid will match the index
|
|
* (except for fabric nodes which are above mapped above FC_SNS_ID
|
|
* and are completely virtual), but subsequent LIPs can cause things
|
|
* to move around.
|
|
*/
|
|
struct lportdb {
|
|
uint32_t loopid : 16,
|
|
: 2,
|
|
fc4_type : 4,
|
|
last_fabric_dev : 1,
|
|
relogin : 1,
|
|
force_logout : 1,
|
|
was_fabric_dev : 1,
|
|
fabric_dev : 1,
|
|
loggedin : 1,
|
|
roles : 2,
|
|
tvalid : 1,
|
|
valid : 1;
|
|
uint32_t port_type : 8,
|
|
portid : 24;
|
|
uint64_t node_wwn;
|
|
uint64_t port_wwn;
|
|
} portdb[MAX_FC_TARG], tport[FC_PORT_ID];
|
|
|
|
/*
|
|
* Scratch DMA mapped in area to fetch Port Database stuff, etc.
|
|
*/
|
|
void * isp_scratch;
|
|
XS_DMA_ADDR_T isp_scdma;
|
|
#ifdef ISP_FW_CRASH_DUMP
|
|
uint16_t * isp_dump_data;
|
|
#endif
|
|
} fcparam;
|
|
|
|
#define FW_CONFIG_WAIT 0
|
|
#define FW_WAIT_AL_PA 1
|
|
#define FW_WAIT_LOGIN 2
|
|
#define FW_READY 3
|
|
#define FW_LOSS_OF_SYNC 4
|
|
#define FW_ERROR 5
|
|
#define FW_REINIT 6
|
|
#define FW_NON_PART 7
|
|
|
|
#define LOOP_NIL 0
|
|
#define LOOP_LIP_RCVD 1
|
|
#define LOOP_PDB_RCVD 2
|
|
#define LOOP_SCANNING_FABRIC 3
|
|
#define LOOP_FSCAN_DONE 4
|
|
#define LOOP_SCANNING_LOOP 5
|
|
#define LOOP_LSCAN_DONE 6
|
|
#define LOOP_SYNCING_PDB 7
|
|
#define LOOP_READY 8
|
|
|
|
#define TOPO_NL_PORT 0
|
|
#define TOPO_FL_PORT 1
|
|
#define TOPO_N_PORT 2
|
|
#define TOPO_F_PORT 3
|
|
#define TOPO_PTP_STUB 4
|
|
|
|
/*
|
|
* Soft Structure per host adapter
|
|
*/
|
|
struct ispsoftc {
|
|
/*
|
|
* Platform (OS) specific data
|
|
*/
|
|
struct isposinfo isp_osinfo;
|
|
|
|
/*
|
|
* Pointer to bus specific functions and data
|
|
*/
|
|
struct ispmdvec * isp_mdvec;
|
|
|
|
/*
|
|
* (Mostly) nonvolatile state. Board specific parameters
|
|
* may contain some volatile state (e.g., current loop state).
|
|
*/
|
|
|
|
void * isp_param; /* type specific */
|
|
uint16_t isp_fwrev[3]; /* Loaded F/W revision */
|
|
uint16_t isp_romfw_rev[3]; /* PROM F/W revision */
|
|
uint16_t isp_maxcmds; /* max possible I/O cmds */
|
|
uint8_t isp_type; /* HBA Chip Type */
|
|
uint8_t isp_revision; /* HBA Chip H/W Revision */
|
|
uint32_t isp_maxluns; /* maximum luns supported */
|
|
|
|
uint32_t isp_clock : 8, /* input clock */
|
|
: 4,
|
|
isp_port : 1, /* 23XX only */
|
|
isp_failed : 1, /* board failed */
|
|
isp_open : 1, /* opened (ioctl) */
|
|
isp_touched : 1, /* board ever seen? */
|
|
isp_bustype : 1, /* SBus or PCI */
|
|
isp_loaded_fw : 1, /* loaded firmware */
|
|
isp_role : 2, /* roles supported */
|
|
isp_dblev : 12; /* debug log mask */
|
|
|
|
uint32_t isp_confopts; /* config options */
|
|
|
|
uint16_t isp_rqstinrp; /* register for REQINP */
|
|
uint16_t isp_rqstoutrp; /* register for REQOUTP */
|
|
uint16_t isp_respinrp; /* register for RESINP */
|
|
uint16_t isp_respoutrp; /* register for RESOUTP */
|
|
|
|
/*
|
|
* Instrumentation
|
|
*/
|
|
uint64_t isp_intcnt; /* total int count */
|
|
uint64_t isp_intbogus; /* spurious int count */
|
|
uint64_t isp_intmboxc; /* mbox completions */
|
|
uint64_t isp_intoasync; /* other async */
|
|
uint64_t isp_rsltccmplt; /* CMDs on result q */
|
|
uint64_t isp_fphccmplt; /* CMDs via fastpost */
|
|
uint16_t isp_rscchiwater;
|
|
uint16_t isp_fpcchiwater;
|
|
|
|
/*
|
|
* Volatile state
|
|
*/
|
|
|
|
volatile uint32_t
|
|
isp_obits : 8, /* mailbox command output */
|
|
isp_mboxbsy : 1, /* mailbox command active */
|
|
isp_state : 3,
|
|
isp_sendmarker : 2, /* send a marker entry */
|
|
isp_update : 2, /* update parameters */
|
|
isp_nactive : 16; /* how many commands active */
|
|
volatile uint16_t isp_reqodx; /* index of last ISP pickup */
|
|
volatile uint16_t isp_reqidx; /* index of next request */
|
|
volatile uint16_t isp_residx; /* index of next result */
|
|
volatile uint16_t isp_resodx; /* index of next result */
|
|
volatile uint16_t isp_rspbsy;
|
|
volatile uint16_t isp_lasthdls; /* last handle seed */
|
|
volatile uint16_t isp_mboxtmp[MAILBOX_STORAGE];
|
|
volatile uint16_t isp_lastmbxcmd; /* last mbox command sent */
|
|
volatile uint16_t isp_mbxwrk0;
|
|
volatile uint16_t isp_mbxwrk1;
|
|
volatile uint16_t isp_mbxwrk2;
|
|
void * isp_mbxworkp;
|
|
|
|
/*
|
|
* Active commands are stored here, indexed by handle functions.
|
|
*/
|
|
XS_T **isp_xflist;
|
|
|
|
#ifdef ISP_TARGET_MODE
|
|
/*
|
|
* Active target commands are stored here, indexed by handle function.
|
|
*/
|
|
void **isp_tgtlist;
|
|
#endif
|
|
|
|
/*
|
|
* request/result queue pointers and DMA handles for them.
|
|
*/
|
|
void * isp_rquest;
|
|
void * isp_result;
|
|
XS_DMA_ADDR_T isp_rquest_dma;
|
|
XS_DMA_ADDR_T isp_result_dma;
|
|
};
|
|
|
|
#define SDPARAM(isp) ((sdparam *) (isp)->isp_param)
|
|
#define FCPARAM(isp) ((fcparam *) (isp)->isp_param)
|
|
|
|
/*
|
|
* ISP Driver Run States
|
|
*/
|
|
#define ISP_NILSTATE 0
|
|
#define ISP_RESETSTATE 1
|
|
#define ISP_INITSTATE 2
|
|
#define ISP_RUNSTATE 3
|
|
|
|
/*
|
|
* ISP Configuration Options
|
|
*/
|
|
#define ISP_CFG_NORELOAD 0x80 /* don't download f/w */
|
|
#define ISP_CFG_NONVRAM 0x40 /* ignore NVRAM */
|
|
#define ISP_CFG_TWOGB 0x20 /* force 2GB connection (23XX only) */
|
|
#define ISP_CFG_ONEGB 0x10 /* force 1GB connection (23XX only) */
|
|
#define ISP_CFG_FULL_DUPLEX 0x01 /* Full Duplex (Fibre Channel only) */
|
|
#define ISP_CFG_PORT_PREF 0x0C /* Mask for Port Prefs (2200 only) */
|
|
#define ISP_CFG_LPORT 0x00 /* prefer {N/F}L-Port connection */
|
|
#define ISP_CFG_NPORT 0x04 /* prefer {N/F}-Port connection */
|
|
#define ISP_CFG_NPORT_ONLY 0x08 /* insist on {N/F}-Port connection */
|
|
#define ISP_CFG_LPORT_ONLY 0x0C /* insist on {N/F}L-Port connection */
|
|
#define ISP_CFG_OWNWWPN 0x100 /* override NVRAM wwpn */
|
|
#define ISP_CFG_OWNWWNN 0x200 /* override NVRAM wwnn */
|
|
#define ISP_CFG_OWNFSZ 0x400 /* override NVRAM frame size */
|
|
#define ISP_CFG_OWNLOOPID 0x800 /* override NVRAM loopid */
|
|
#define ISP_CFG_OWNEXCTHROTTLE 0x1000 /* override NVRAM execution throttle */
|
|
|
|
/*
|
|
* Prior to calling isp_reset for the first time, the outer layer
|
|
* should set isp_role to one of NONE, INITIATOR, TARGET, BOTH.
|
|
*
|
|
* If you set ISP_ROLE_NONE, the cards will be reset, new firmware loaded,
|
|
* NVRAM read, and defaults set, but any further initialization (e.g.
|
|
* INITIALIZE CONTROL BLOCK commands for 2X00 cards) won't be done.
|
|
*
|
|
* If INITIATOR MODE isn't set, attempts to run commands will be stopped
|
|
* at isp_start and completed with the moral equivalent of SELECTION TIMEOUT.
|
|
*
|
|
* If TARGET MODE is set, it doesn't mean that the rest of target mode support
|
|
* needs to be enabled, or will even work. What happens with the 2X00 cards
|
|
* here is that if you have enabled it with TARGET MODE as part of the ICB
|
|
* options, but you haven't given the f/w any ram resources for ATIOs or
|
|
* Immediate Notifies, the f/w just handles what it can and you never see
|
|
* anything. Basically, it sends a single byte of data (the first byte,
|
|
* which you can set as part of the INITIALIZE CONTROL BLOCK command) for
|
|
* INQUIRY, and sends back QUEUE FULL status for any other command.
|
|
*
|
|
*/
|
|
#define ISP_ROLE_NONE 0x0
|
|
#define ISP_ROLE_TARGET 0x1
|
|
#define ISP_ROLE_INITIATOR 0x2
|
|
#define ISP_ROLE_BOTH (ISP_ROLE_TARGET|ISP_ROLE_INITIATOR)
|
|
#define ISP_ROLE_EITHER ISP_ROLE_BOTH
|
|
#ifndef ISP_DEFAULT_ROLES
|
|
#define ISP_DEFAULT_ROLES ISP_ROLE_INITIATOR
|
|
#endif
|
|
|
|
|
|
/*
|
|
* Firmware related defines
|
|
*/
|
|
#define ISP_CODE_ORG 0x1000 /* default f/w code start */
|
|
#define ISP_CODE_ORG_2300 0x0800 /* ..except for 2300s */
|
|
#define ISP_FW_REV(maj, min, mic) ((maj << 24) | (min << 16) | mic)
|
|
#define ISP_FW_MAJOR(code) ((code >> 24) & 0xff)
|
|
#define ISP_FW_MINOR(code) ((code >> 16) & 0xff)
|
|
#define ISP_FW_MICRO(code) ((code >> 8) & 0xff)
|
|
#define ISP_FW_REVX(xp) ((xp[0]<<24) | (xp[1] << 16) | xp[2])
|
|
#define ISP_FW_MAJORX(xp) (xp[0])
|
|
#define ISP_FW_MINORX(xp) (xp[1])
|
|
#define ISP_FW_MICROX(xp) (xp[2])
|
|
#define ISP_FW_NEWER_THAN(i, major, minor, micro) \
|
|
(ISP_FW_REVX((i)->isp_fwrev) > ISP_FW_REV(major, minor, micro))
|
|
|
|
/*
|
|
* Bus (implementation) types
|
|
*/
|
|
#define ISP_BT_PCI 0 /* PCI Implementations */
|
|
#define ISP_BT_SBUS 1 /* SBus Implementations */
|
|
|
|
/*
|
|
* If we have not otherwise defined SBus support away make sure
|
|
* it is defined here such that the code is included as default
|
|
*/
|
|
#ifndef ISP_SBUS_SUPPORTED
|
|
#define ISP_SBUS_SUPPORTED 1
|
|
#endif
|
|
|
|
/*
|
|
* Chip Types
|
|
*/
|
|
#define ISP_HA_SCSI 0xf
|
|
#define ISP_HA_SCSI_UNKNOWN 0x1
|
|
#define ISP_HA_SCSI_1020 0x2
|
|
#define ISP_HA_SCSI_1020A 0x3
|
|
#define ISP_HA_SCSI_1040 0x4
|
|
#define ISP_HA_SCSI_1040A 0x5
|
|
#define ISP_HA_SCSI_1040B 0x6
|
|
#define ISP_HA_SCSI_1040C 0x7
|
|
#define ISP_HA_SCSI_1240 0x8
|
|
#define ISP_HA_SCSI_1080 0x9
|
|
#define ISP_HA_SCSI_1280 0xa
|
|
#define ISP_HA_SCSI_10160 0xb
|
|
#define ISP_HA_SCSI_12160 0xc
|
|
#define ISP_HA_FC 0xf0
|
|
#define ISP_HA_FC_2100 0x10
|
|
#define ISP_HA_FC_2200 0x20
|
|
#define ISP_HA_FC_2300 0x30
|
|
#define ISP_HA_FC_2312 0x40
|
|
#define ISP_HA_FC_2322 0x50
|
|
#define ISP_HA_FC_2400 0x60
|
|
#define ISP_HA_FC_2422 0x61
|
|
|
|
#define IS_SCSI(isp) (isp->isp_type & ISP_HA_SCSI)
|
|
#define IS_1240(isp) (isp->isp_type == ISP_HA_SCSI_1240)
|
|
#define IS_1080(isp) (isp->isp_type == ISP_HA_SCSI_1080)
|
|
#define IS_1280(isp) (isp->isp_type == ISP_HA_SCSI_1280)
|
|
#define IS_10160(isp) (isp->isp_type == ISP_HA_SCSI_10160)
|
|
#define IS_12160(isp) (isp->isp_type == ISP_HA_SCSI_12160)
|
|
|
|
#define IS_12X0(isp) (IS_1240(isp) || IS_1280(isp))
|
|
#define IS_1X160(isp) (IS_10160(isp) || IS_12160(isp))
|
|
#define IS_DUALBUS(isp) (IS_12X0(isp) || IS_12160(isp))
|
|
#define IS_ULTRA2(isp) (IS_1080(isp) || IS_1280(isp) || IS_1X160(isp))
|
|
#define IS_ULTRA3(isp) (IS_1X160(isp))
|
|
|
|
#define IS_FC(isp) ((isp)->isp_type & ISP_HA_FC)
|
|
#define IS_2100(isp) ((isp)->isp_type == ISP_HA_FC_2100)
|
|
#define IS_2200(isp) ((isp)->isp_type == ISP_HA_FC_2200)
|
|
#define IS_23XX(isp) ((isp)->isp_type >= ISP_HA_FC_2300)
|
|
#define IS_2300(isp) ((isp)->isp_type == ISP_HA_FC_2300)
|
|
#define IS_2312(isp) ((isp)->isp_type == ISP_HA_FC_2312)
|
|
#define IS_2322(isp) ((isp)->isp_type == ISP_HA_FC_2322)
|
|
#define IS_24XX(isp) ((isp)->isp_type >= ISP_HA_FC_2400)
|
|
|
|
/*
|
|
* DMA related macros
|
|
*/
|
|
#define DMA_WD3(x) ((((uint64_t)x) >> 48) & 0xffff)
|
|
#define DMA_WD2(x) ((((uint64_t)x) >> 32) & 0xffff)
|
|
#define DMA_WD1(x) (((x) >> 16) & 0xffff)
|
|
#define DMA_WD0(x) (((x) & 0xffff))
|
|
|
|
#define DMA_LO32(x) ((uint32_t) (x))
|
|
#define DMA_HI32(x) ((uint32_t)(((uint64_t)x) >> 32))
|
|
|
|
/*
|
|
* Core System Function Prototypes
|
|
*/
|
|
|
|
/*
|
|
* Reset Hardware. Totally. Assumes that you'll follow this with
|
|
* a call to isp_init.
|
|
*/
|
|
void isp_reset(ispsoftc_t *);
|
|
|
|
/*
|
|
* Initialize Hardware to known state
|
|
*/
|
|
void isp_init(ispsoftc_t *);
|
|
|
|
/*
|
|
* Reset the ISP and call completion for any orphaned commands.
|
|
*/
|
|
void isp_reinit(ispsoftc_t *);
|
|
|
|
#ifdef ISP_FW_CRASH_DUMP
|
|
/*
|
|
* Dump firmware entry point.
|
|
*/
|
|
void isp_fw_dump(ispsoftc_t *isp);
|
|
#endif
|
|
|
|
/*
|
|
* Internal Interrupt Service Routine
|
|
*
|
|
* The outer layers do the spade work to get the appropriate status register,
|
|
* semaphore register and first mailbox register (if appropriate). This also
|
|
* means that most spurious/bogus interrupts not for us can be filtered first.
|
|
*/
|
|
void isp_intr(ispsoftc_t *, uint16_t, uint16_t, uint16_t);
|
|
|
|
|
|
/*
|
|
* Command Entry Point- Platform Dependent layers call into this
|
|
*/
|
|
int isp_start(XS_T *);
|
|
|
|
/* these values are what isp_start returns */
|
|
#define CMD_COMPLETE 101 /* command completed */
|
|
#define CMD_EAGAIN 102 /* busy- maybe retry later */
|
|
#define CMD_QUEUED 103 /* command has been queued for execution */
|
|
#define CMD_RQLATER 104 /* requeue this command later */
|
|
|
|
/*
|
|
* Command Completion Point- Core layers call out from this with completed cmds
|
|
*/
|
|
void isp_done(XS_T *);
|
|
|
|
/*
|
|
* Platform Dependent to External to Internal Control Function
|
|
*
|
|
* Assumes locks are held on entry. You should note that with many of
|
|
* these commands and locks may be released while this is occurring.
|
|
*
|
|
* A few notes about some of these functions:
|
|
*
|
|
* ISPCTL_FCLINK_TEST tests to make sure we have good fibre channel link.
|
|
* The argument is a pointer to an integer which is the time, in microseconds,
|
|
* we should wait to see whether we have good link. This test, if successful,
|
|
* lets us know our connection topology and our Loop ID/AL_PA and so on.
|
|
* You can't get anywhere without this.
|
|
*
|
|
* ISPCTL_SCAN_FABRIC queries the name server (if we're on a fabric) for
|
|
* all entities using the FC Generic Services subcommand GET ALL NEXT.
|
|
* For each found entity, an ISPASYNC_FABRICDEV event is generated (see
|
|
* below).
|
|
*
|
|
* ISPCTL_SCAN_LOOP does a local loop scan. This is only done if the connection
|
|
* topology is NL or FL port (private or public loop). Since the Qlogic f/w
|
|
* 'automatically' manages local loop connections, this function essentially
|
|
* notes the arrival, departure, and possible shuffling around of local loop
|
|
* entities. Thus for each arrival and departure this generates an isp_async
|
|
* event of ISPASYNC_PROMENADE (see below).
|
|
*
|
|
* ISPCTL_PDB_SYNC is somewhat misnamed. It actually is the final step, in
|
|
* order, of ISPCTL_FCLINK_TEST, ISPCTL_SCAN_FABRIC, and ISPCTL_SCAN_LOOP.
|
|
* The main purpose of ISPCTL_PDB_SYNC is to complete management of logging
|
|
* and logging out of fabric devices (if one is on a fabric) and then marking
|
|
* the 'loop state' as being ready to now be used for sending commands to
|
|
* devices. Originally fabric name server and local loop scanning were
|
|
* part of this function. It's now been separated to allow for finer control.
|
|
*/
|
|
typedef enum {
|
|
ISPCTL_RESET_BUS, /* Reset Bus */
|
|
ISPCTL_RESET_DEV, /* Reset Device */
|
|
ISPCTL_ABORT_CMD, /* Abort Command */
|
|
ISPCTL_UPDATE_PARAMS, /* Update Operating Parameters (SCSI) */
|
|
ISPCTL_FCLINK_TEST, /* Test FC Link Status */
|
|
ISPCTL_SCAN_FABRIC, /* (Re)scan Fabric Name Server */
|
|
ISPCTL_SCAN_LOOP, /* (Re)scan Local Loop */
|
|
ISPCTL_PDB_SYNC, /* Synchronize Port Database */
|
|
ISPCTL_SEND_LIP, /* Send a LIP */
|
|
ISPCTL_GET_POSMAP, /* Get FC-AL position map */
|
|
ISPCTL_RUN_MBOXCMD, /* run a mailbox command */
|
|
ISPCTL_TOGGLE_TMODE, /* toggle target mode */
|
|
ISPCTL_GET_PDB /* get a single port database entry */
|
|
} ispctl_t;
|
|
int isp_control(ispsoftc_t *, ispctl_t, void *);
|
|
|
|
|
|
/*
|
|
* Platform Dependent to Internal to External Control Function
|
|
* (each platform must provide such a function)
|
|
*
|
|
* Assumes locks are held.
|
|
*
|
|
* A few notes about some of these functions:
|
|
*
|
|
* ISPASYNC_CHANGE_NOTIFY notifies the outer layer that a change has
|
|
* occurred that invalidates the list of fabric devices known and/or
|
|
* the list of known loop devices. The argument passed is a pointer
|
|
* whose values are defined below (local loop change, name server
|
|
* change, other). 'Other' may simply be a LIP, or a change in
|
|
* connection topology.
|
|
*
|
|
* ISPASYNC_FABRIC_DEV announces the next element in a list of
|
|
* fabric device names we're getting out of the name server. The
|
|
* argument points to a GET ALL NEXT response structure. The list
|
|
* is known to terminate with an entry that refers to ourselves.
|
|
* One of the main purposes of this function is to allow outer
|
|
* layers, which are OS dependent, to set policy as to which fabric
|
|
* devices might actually be logged into (and made visible) later
|
|
* at ISPCTL_PDB_SYNC time. Since there's a finite number of fabric
|
|
* devices that we can log into (256 less 3 'reserved' for F-port
|
|
* topologies), and fabrics can grow up to 8 million or so entries
|
|
* (24 bits of Port Address, less a wad of reserved spaces), clearly
|
|
* we had better let the OS determine login policy.
|
|
*
|
|
* ISPASYNC_PROMENADE has an argument that is a pointer to an integer which
|
|
* is an index into the portdb in the softc ('target'). Whether that entry's
|
|
* valid tag is set or not says whether something has arrived or departed.
|
|
* The name refers to a favorite pastime of many city dwellers- watching
|
|
* people come and go, talking of Michaelangelo, and so on..
|
|
*
|
|
* ISPASYNC_UNHANDLED_RESPONSE gives outer layers a chance to parse a
|
|
* response queue entry not otherwise handled. The outer layer should
|
|
* return non-zero if it handled it. The 'arg' points to an unmassaged
|
|
* response queue entry.
|
|
*/
|
|
|
|
typedef enum {
|
|
ISPASYNC_NEW_TGT_PARAMS, /* New Target Parameters Negotiated */
|
|
ISPASYNC_BUS_RESET, /* Bus Was Reset */
|
|
ISPASYNC_LOOP_DOWN, /* FC Loop Down */
|
|
ISPASYNC_LOOP_UP, /* FC Loop Up */
|
|
ISPASYNC_LIP, /* LIP Received */
|
|
ISPASYNC_LOOP_RESET, /* Loop Reset Received */
|
|
ISPASYNC_CHANGE_NOTIFY, /* FC Change Notification */
|
|
ISPASYNC_FABRIC_DEV, /* FC Fabric Device Arrival */
|
|
ISPASYNC_PROMENADE, /* FC Objects coming && going */
|
|
ISPASYNC_TARGET_NOTIFY, /* target asynchronous notification event */
|
|
ISPASYNC_TARGET_ACTION, /* target action requested */
|
|
ISPASYNC_CONF_CHANGE, /* Platform Configuration Change */
|
|
ISPASYNC_UNHANDLED_RESPONSE, /* Unhandled Response Entry */
|
|
ISPASYNC_FW_CRASH, /* Firmware has crashed */
|
|
ISPASYNC_FW_DUMPED, /* Firmware crashdump taken */
|
|
ISPASYNC_FW_RESTARTED /* Firmware has been restarted */
|
|
} ispasync_t;
|
|
int isp_async(ispsoftc_t *, ispasync_t, void *);
|
|
|
|
#define ISPASYNC_CHANGE_PDB ((void *) 0)
|
|
#define ISPASYNC_CHANGE_SNS ((void *) 1)
|
|
#define ISPASYNC_CHANGE_OTHER ((void *) 2)
|
|
|
|
/*
|
|
* Platform Dependent Error and Debug Printout
|
|
*
|
|
* Generally this is:
|
|
*
|
|
* void isp_prt(ispsoftc_t *, int level, const char *, ...)
|
|
*
|
|
* but due to compiler differences on different platforms this won't be
|
|
* formally done here. Instead, it goes in each platform definition file.
|
|
*/
|
|
|
|
#define ISP_LOGALL 0x0 /* log always */
|
|
#define ISP_LOGCONFIG 0x1 /* log configuration messages */
|
|
#define ISP_LOGINFO 0x2 /* log informational messages */
|
|
#define ISP_LOGWARN 0x4 /* log warning messages */
|
|
#define ISP_LOGERR 0x8 /* log error messages */
|
|
#define ISP_LOGDEBUG0 0x10 /* log simple debug messages */
|
|
#define ISP_LOGDEBUG1 0x20 /* log intermediate debug messages */
|
|
#define ISP_LOGDEBUG2 0x40 /* log most debug messages */
|
|
#define ISP_LOGDEBUG3 0x80 /* log high frequency debug messages */
|
|
#define ISP_LOGDEBUG4 0x100 /* log high frequency debug messages */
|
|
#define ISP_LOGTDEBUG0 0x200 /* log simple debug messages (target mode) */
|
|
#define ISP_LOGTDEBUG1 0x400 /* log intermediate debug messages (target) */
|
|
#define ISP_LOGTDEBUG2 0x800 /* log all debug messages (target) */
|
|
|
|
/*
|
|
* Each Platform provides it's own isposinfo substructure of the ispsoftc
|
|
* defined above.
|
|
*
|
|
* Each platform must also provide the following macros/defines:
|
|
*
|
|
*
|
|
* ISP2100_SCRLEN - length for the Fibre Channel scratch DMA area
|
|
*
|
|
* MEMZERO(dst, src) platform zeroing function
|
|
* MEMCPY(dst, src, count) platform copying function
|
|
* SNPRINTF(buf, bufsize, fmt, ...) snprintf
|
|
* USEC_DELAY(usecs) microsecond spindelay function
|
|
* USEC_SLEEP(isp, usecs) microsecond sleep function
|
|
*
|
|
* NANOTIME_T nanosecond time type
|
|
*
|
|
* GET_NANOTIME(NANOTIME_T *) get current nanotime.
|
|
*
|
|
* GET_NANOSEC(NANOTIME_T *) get uint64_t from NANOTIME_T
|
|
*
|
|
* NANOTIME_SUB(NANOTIME_T *, NANOTIME_T *)
|
|
* subtract two NANOTIME_T values
|
|
*
|
|
*
|
|
* MAXISPREQUEST(ispsoftc_t *) maximum request queue size
|
|
* for this particular board type
|
|
*
|
|
* MEMORYBARRIER(ispsoftc_t *, barrier_type, offset, size)
|
|
*
|
|
* Function/Macro the provides memory synchronization on
|
|
* various objects so that the ISP's and the system's view
|
|
* of the same object is consistent.
|
|
*
|
|
* MBOX_ACQUIRE(ispsoftc_t *) acquire lock on mailbox regs
|
|
* MBOX_WAIT_COMPLETE(ispsoftc_t *) wait for mailbox cmd to be done
|
|
* MBOX_NOTIFY_COMPLETE(ispsoftc_t *) notification of mbox cmd donee
|
|
* MBOX_RELEASE(ispsoftc_t *) release lock on mailbox regs
|
|
*
|
|
* FC_SCRATCH_ACQUIRE(ispsoftc_t *) acquire lock on FC scratch area
|
|
* FC_SCRATCH_RELEASE(ispsoftc_t *) acquire lock on FC scratch area
|
|
*
|
|
* SCSI_GOOD SCSI 'Good' Status
|
|
* SCSI_CHECK SCSI 'Check Condition' Status
|
|
* SCSI_BUSY SCSI 'Busy' Status
|
|
* SCSI_QFULL SCSI 'Queue Full' Status
|
|
*
|
|
* XS_T Platform SCSI transaction type (i.e., command for HBA)
|
|
* XS_DMA_ADDR_T Platform PCI DMA Address Type
|
|
* XS_ISP(xs) gets an instance out of an XS_T
|
|
* XS_CHANNEL(xs) gets the channel (bus # for DUALBUS cards) ""
|
|
* XS_TGT(xs) gets the target ""
|
|
* XS_LUN(xs) gets the lun ""
|
|
* XS_CDBP(xs) gets a pointer to the scsi CDB ""
|
|
* XS_CDBLEN(xs) gets the CDB's length ""
|
|
* XS_XFRLEN(xs) gets the associated data transfer length ""
|
|
* XS_TIME(xs) gets the time (in milliseconds) for this command
|
|
* XS_RESID(xs) gets the current residual count
|
|
* XS_STSP(xs) gets a pointer to the SCSI status byte ""
|
|
* XS_SNSP(xs) gets a pointer to the associate sense data
|
|
* XS_SNSLEN(xs) gets the length of sense data storage
|
|
* XS_SNSKEY(xs) dereferences XS_SNSP to get the current stored Sense Key
|
|
* XS_TAG_P(xs) predicate of whether this command should be tagged
|
|
* XS_TAG_TYPE(xs) which type of tag to use
|
|
* XS_SETERR(xs) set error state
|
|
*
|
|
* HBA_NOERROR command has no erros
|
|
* HBA_BOTCH hba botched something
|
|
* HBA_CMDTIMEOUT command timed out
|
|
* HBA_SELTIMEOUT selection timed out (also port logouts for FC)
|
|
* HBA_TGTBSY target returned a BUSY status
|
|
* HBA_BUSRESET bus reset destroyed command
|
|
* HBA_ABORTED command was aborted (by request)
|
|
* HBA_DATAOVR a data overrun was detected
|
|
* HBA_ARQFAIL Automatic Request Sense failed
|
|
*
|
|
* XS_ERR(xs) return current error state
|
|
* XS_NOERR(xs) there is no error currently set
|
|
* XS_INITERR(xs) initialize error state
|
|
*
|
|
* XS_SAVE_SENSE(xs, sp) save sense data
|
|
*
|
|
* XS_SET_STATE_STAT(isp, sp, xs) platform dependent interpreter of
|
|
* response queue entry status bits
|
|
*
|
|
*
|
|
* DEFAULT_IID(ispsoftc_t *) Default SCSI initiator ID
|
|
* DEFAULT_LOOPID(ispsoftc_t *) Default FC Loop ID
|
|
* DEFAULT_NODEWWN(ispsoftc_t *) Default Node WWN
|
|
* DEFAULT_PORTWWN(ispsoftc_t *) Default Port WWN
|
|
* DEFAULT_FRAMESIZE(ispsoftc_t *) Default Frame Size
|
|
* DEFAULT_EXEC_THROTTLE(ispsoftc_t *) Default Execution Throttle
|
|
* These establish reasonable defaults for each platform.
|
|
* These must be available independent of card NVRAM and are
|
|
* to be used should NVRAM not be readable.
|
|
*
|
|
* ISP_NODEWWN(ispsoftc_t *) FC Node WWN to use
|
|
* ISP_PORTWWN(ispsoftc_t *) FC Port WWN to use
|
|
*
|
|
* These are to be used after NVRAM is read. The tags
|
|
* in fcparam.isp_{node,port}wwn reflect the values
|
|
* read from NVRAM (possibly corrected for card botches).
|
|
* Each platform can take that information and override
|
|
* it or ignore and return the Node and Port WWNs to be
|
|
* used when sending the Qlogic f/w the Initialization Control
|
|
* Block.
|
|
*
|
|
* (XXX these do endian specific transformations- in transition XXX)
|
|
*
|
|
* ISP_IOXPUT_8(ispsoftc_t *, uint8_t srcval, uint8_t *dstptr)
|
|
* ISP_IOXPUT_16(ispsoftc_t *, uint16_t srcval, uint16_t *dstptr)
|
|
* ISP_IOXPUT_32(ispsoftc_t *, uint32_t srcval, uint32_t *dstptr)
|
|
*
|
|
* ISP_IOXGET_8(ispsoftc_t *, uint8_t *srcptr, uint8_t dstrval)
|
|
* ISP_IOXGET_16(ispsoftc_t *, uint16_t *srcptr, uint16_t dstrval)
|
|
* ISP_IOXGET_32(ispsoftc_t *, uint32_t *srcptr, uint32_t dstrval)
|
|
*
|
|
* ISP_SWIZZLE_NVRAM_WORD(ispsoftc_t *, uint16_t *)
|
|
*/
|
|
|
|
#endif /* _ISPVAR_H */
|