2016 lines
53 KiB
C
2016 lines
53 KiB
C
/*
|
|
* Copyright (C) 2001 Eduardo Horvath.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* from: NetBSD: gem.c,v 1.9 2001/10/21 20:45:15 thorpej Exp
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* Driver for Sun GEM ethernet controllers.
|
|
*/
|
|
|
|
#define GEM_DEBUG
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/callout.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/sockio.h>
|
|
|
|
#include <net/ethernet.h>
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
|
|
#include <machine/bus.h>
|
|
|
|
#include <dev/mii/mii.h>
|
|
#include <dev/mii/miivar.h>
|
|
|
|
#include <gem/if_gemreg.h>
|
|
#include <gem/if_gemvar.h>
|
|
|
|
#define TRIES 10000
|
|
|
|
static void gem_start(struct ifnet *);
|
|
static void gem_stop(struct ifnet *, int);
|
|
static int gem_ioctl(struct ifnet *, u_long, caddr_t);
|
|
static void gem_cddma_callback(void *, bus_dma_segment_t *, int, int);
|
|
static void gem_rxdma_callback(void *, bus_dma_segment_t *, int, int);
|
|
static void gem_txdma_callback(void *, bus_dma_segment_t *, int, int);
|
|
static void gem_tick(void *);
|
|
static void gem_watchdog(struct ifnet *);
|
|
static void gem_init(void *);
|
|
static void gem_init_regs(struct gem_softc *sc);
|
|
static int gem_ringsize(int sz);
|
|
static int gem_meminit(struct gem_softc *);
|
|
static int gem_dmamap_load_mbuf(struct gem_softc *, struct mbuf *,
|
|
bus_dmamap_callback_t *, struct gem_txjob *, int);
|
|
static void gem_dmamap_unload_mbuf(struct gem_softc *, struct gem_txjob *);
|
|
static void gem_dmamap_commit_mbuf(struct gem_softc *, struct gem_txjob *);
|
|
static void gem_mifinit(struct gem_softc *);
|
|
static int gem_bitwait(struct gem_softc *sc, bus_addr_t r,
|
|
u_int32_t clr, u_int32_t set);
|
|
static int gem_reset_rx(struct gem_softc *);
|
|
static int gem_reset_tx(struct gem_softc *);
|
|
static int gem_disable_rx(struct gem_softc *);
|
|
static int gem_disable_tx(struct gem_softc *);
|
|
static void gem_rxdrain(struct gem_softc *);
|
|
static int gem_add_rxbuf(struct gem_softc *, int);
|
|
static void gem_setladrf(struct gem_softc *);
|
|
|
|
struct mbuf *gem_get(struct gem_softc *, int, int);
|
|
static void gem_eint(struct gem_softc *, u_int);
|
|
static void gem_rint(struct gem_softc *);
|
|
static void gem_tint(struct gem_softc *);
|
|
#ifdef notyet
|
|
static void gem_power(int, void *);
|
|
#endif
|
|
|
|
devclass_t gem_devclass;
|
|
DRIVER_MODULE(miibus, gem, miibus_driver, miibus_devclass, 0, 0);
|
|
MODULE_DEPEND(gem, miibus, 1, 1, 1);
|
|
|
|
#ifdef GEM_DEBUG
|
|
#define DPRINTF(sc, x) if ((sc)->sc_arpcom.ac_if.if_flags & IFF_DEBUG) \
|
|
printf x
|
|
#include <sys/ktr.h>
|
|
#define KTR_GEM KTR_CT2
|
|
#else
|
|
#define DPRINTF(sc, x) /* nothing */
|
|
#endif
|
|
|
|
#define GEM_NSEGS GEM_NTXSEGS
|
|
|
|
/*
|
|
* gem_attach:
|
|
*
|
|
* Attach a Gem interface to the system.
|
|
*/
|
|
int
|
|
gem_attach(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
struct ifnet *ifp = &sc->sc_arpcom.ac_if;
|
|
struct mii_softc *child;
|
|
int i, error;
|
|
|
|
/* Make sure the chip is stopped. */
|
|
ifp->if_softc = sc;
|
|
gem_reset(sc);
|
|
|
|
error = bus_dma_tag_create(NULL, 1, 0, BUS_SPACE_MAXADDR_32BIT,
|
|
BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, GEM_NSEGS,
|
|
BUS_SPACE_MAXSIZE_32BIT, 0, &sc->sc_pdmatag);
|
|
if (error)
|
|
return (error);
|
|
|
|
error = bus_dma_tag_create(sc->sc_pdmatag, 1, 0,
|
|
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MAXBSIZE,
|
|
GEM_NSEGS, BUS_SPACE_MAXSIZE_32BIT, BUS_DMA_ALLOCNOW,
|
|
&sc->sc_dmatag);
|
|
if (error)
|
|
goto fail_0;
|
|
|
|
error = bus_dma_tag_create(sc->sc_pdmatag, PAGE_SIZE, 0,
|
|
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
|
|
sizeof(struct gem_control_data), 1,
|
|
sizeof(struct gem_control_data), BUS_DMA_ALLOCNOW,
|
|
&sc->sc_cdmatag);
|
|
if (error)
|
|
goto fail_1;
|
|
|
|
/*
|
|
* Allocate the control data structures, and create and load the
|
|
* DMA map for it.
|
|
*/
|
|
if ((error = bus_dmamem_alloc(sc->sc_cdmatag,
|
|
(void **)&sc->sc_control_data, 0, &sc->sc_cddmamap))) {
|
|
device_printf(sc->sc_dev, "unable to allocate control data,"
|
|
" error = %d\n", error);
|
|
goto fail_2;
|
|
}
|
|
|
|
sc->sc_cddma = 0;
|
|
if ((error = bus_dmamap_load(sc->sc_cdmatag, sc->sc_cddmamap,
|
|
sc->sc_control_data, sizeof(struct gem_control_data),
|
|
gem_cddma_callback, sc, 0)) != 0 || sc->sc_cddma == 0) {
|
|
device_printf(sc->sc_dev, "unable to load control data DMA "
|
|
"map, error = %d\n", error);
|
|
goto fail_3;
|
|
}
|
|
|
|
/*
|
|
* Initialize the transmit job descriptors.
|
|
*/
|
|
STAILQ_INIT(&sc->sc_txfreeq);
|
|
STAILQ_INIT(&sc->sc_txdirtyq);
|
|
|
|
/*
|
|
* Create the transmit buffer DMA maps.
|
|
*/
|
|
error = ENOMEM;
|
|
for (i = 0; i < GEM_TXQUEUELEN; i++) {
|
|
struct gem_txsoft *txs;
|
|
|
|
txs = &sc->sc_txsoft[i];
|
|
txs->txs_mbuf = NULL;
|
|
txs->txs_ndescs = 0;
|
|
if ((error = bus_dmamap_create(sc->sc_dmatag, 0,
|
|
&txs->txs_dmamap)) != 0) {
|
|
device_printf(sc->sc_dev, "unable to create tx DMA map "
|
|
"%d, error = %d\n", i, error);
|
|
goto fail_4;
|
|
}
|
|
STAILQ_INSERT_TAIL(&sc->sc_txfreeq, txs, txs_q);
|
|
}
|
|
|
|
/*
|
|
* Create the receive buffer DMA maps.
|
|
*/
|
|
for (i = 0; i < GEM_NRXDESC; i++) {
|
|
if ((error = bus_dmamap_create(sc->sc_dmatag, 0,
|
|
&sc->sc_rxsoft[i].rxs_dmamap)) != 0) {
|
|
device_printf(sc->sc_dev, "unable to create rx DMA map "
|
|
"%d, error = %d\n", i, error);
|
|
goto fail_5;
|
|
}
|
|
sc->sc_rxsoft[i].rxs_mbuf = NULL;
|
|
}
|
|
|
|
|
|
gem_mifinit(sc);
|
|
|
|
if ((error = mii_phy_probe(sc->sc_dev, &sc->sc_miibus, gem_mediachange,
|
|
gem_mediastatus)) != 0) {
|
|
device_printf(sc->sc_dev, "phy probe failed: %d\n", error);
|
|
goto fail_5;
|
|
}
|
|
sc->sc_mii = device_get_softc(sc->sc_miibus);
|
|
|
|
/*
|
|
* From this point forward, the attachment cannot fail. A failure
|
|
* before this point releases all resources that may have been
|
|
* allocated.
|
|
*/
|
|
|
|
/* Announce ourselves. */
|
|
device_printf(sc->sc_dev, "Ethernet address:");
|
|
for (i = 0; i < 6; i++)
|
|
printf("%c%02x", i > 0 ? ':' : ' ', sc->sc_arpcom.ac_enaddr[i]);
|
|
printf("\n");
|
|
|
|
/* Initialize ifnet structure. */
|
|
ifp->if_softc = sc;
|
|
ifp->if_unit = device_get_unit(sc->sc_dev);
|
|
ifp->if_name = "gem";
|
|
ifp->if_mtu = ETHERMTU;
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_start = gem_start;
|
|
ifp->if_ioctl = gem_ioctl;
|
|
ifp->if_watchdog = gem_watchdog;
|
|
ifp->if_init = gem_init;
|
|
ifp->if_output = ether_output;
|
|
ifp->if_snd.ifq_maxlen = GEM_TXQUEUELEN;
|
|
/*
|
|
* Walk along the list of attached MII devices and
|
|
* establish an `MII instance' to `phy number'
|
|
* mapping. We'll use this mapping in media change
|
|
* requests to determine which phy to use to program
|
|
* the MIF configuration register.
|
|
*/
|
|
for (child = LIST_FIRST(&sc->sc_mii->mii_phys); child != NULL;
|
|
child = LIST_NEXT(child, mii_list)) {
|
|
/*
|
|
* Note: we support just two PHYs: the built-in
|
|
* internal device and an external on the MII
|
|
* connector.
|
|
*/
|
|
if (child->mii_phy > 1 || child->mii_inst > 1) {
|
|
device_printf(sc->sc_dev, "cannot accomodate "
|
|
"MII device %s at phy %d, instance %d\n",
|
|
device_get_name(child->mii_dev),
|
|
child->mii_phy, child->mii_inst);
|
|
continue;
|
|
}
|
|
|
|
sc->sc_phys[child->mii_inst] = child->mii_phy;
|
|
}
|
|
|
|
/*
|
|
* Now select and activate the PHY we will use.
|
|
*
|
|
* The order of preference is External (MDI1),
|
|
* Internal (MDI0), Serial Link (no MII).
|
|
*/
|
|
if (sc->sc_phys[1]) {
|
|
#ifdef GEM_DEBUG
|
|
printf("using external phy\n");
|
|
#endif
|
|
sc->sc_mif_config |= GEM_MIF_CONFIG_PHY_SEL;
|
|
} else {
|
|
#ifdef GEM_DEBUG
|
|
printf("using internal phy\n");
|
|
#endif
|
|
sc->sc_mif_config &= ~GEM_MIF_CONFIG_PHY_SEL;
|
|
}
|
|
bus_space_write_4(sc->sc_bustag, sc->sc_h, GEM_MIF_CONFIG,
|
|
sc->sc_mif_config);
|
|
/* Attach the interface. */
|
|
ether_ifattach(ifp, ETHER_BPF_SUPPORTED);
|
|
|
|
#if notyet
|
|
/*
|
|
* Add a suspend hook to make sure we come back up after a
|
|
* resume.
|
|
*/
|
|
sc->sc_powerhook = powerhook_establish(gem_power, sc);
|
|
if (sc->sc_powerhook == NULL)
|
|
device_printf(sc->sc_dev, "WARNING: unable to establish power "
|
|
"hook\n");
|
|
#endif
|
|
|
|
callout_init(&sc->sc_tick_ch, 0);
|
|
return (0);
|
|
|
|
/*
|
|
* Free any resources we've allocated during the failed attach
|
|
* attempt. Do this in reverse order and fall through.
|
|
*/
|
|
fail_5:
|
|
for (i = 0; i < GEM_NRXDESC; i++) {
|
|
if (sc->sc_rxsoft[i].rxs_dmamap != NULL)
|
|
bus_dmamap_destroy(sc->sc_dmatag,
|
|
sc->sc_rxsoft[i].rxs_dmamap);
|
|
}
|
|
fail_4:
|
|
for (i = 0; i < GEM_TXQUEUELEN; i++) {
|
|
if (sc->sc_txsoft[i].txs_dmamap != NULL)
|
|
bus_dmamap_destroy(sc->sc_dmatag,
|
|
sc->sc_txsoft[i].txs_dmamap);
|
|
}
|
|
bus_dmamap_unload(sc->sc_dmatag, sc->sc_cddmamap);
|
|
fail_3:
|
|
bus_dmamem_free(sc->sc_cdmatag, sc->sc_control_data,
|
|
sc->sc_cddmamap);
|
|
fail_2:
|
|
bus_dma_tag_destroy(sc->sc_cdmatag);
|
|
fail_1:
|
|
bus_dma_tag_destroy(sc->sc_dmatag);
|
|
fail_0:
|
|
bus_dma_tag_destroy(sc->sc_pdmatag);
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
gem_cddma_callback(xsc, segs, nsegs, error)
|
|
void *xsc;
|
|
bus_dma_segment_t *segs;
|
|
int nsegs;
|
|
int error;
|
|
{
|
|
struct gem_softc *sc = (struct gem_softc *)xsc;
|
|
|
|
if (error != 0)
|
|
return;
|
|
if (nsegs != 1) {
|
|
/* can't happen... */
|
|
panic("gem_cddma_callback: bad control buffer segment count");
|
|
}
|
|
sc->sc_cddma = segs[0].ds_addr;
|
|
}
|
|
|
|
static void
|
|
gem_rxdma_callback(xsc, segs, nsegs, error)
|
|
void *xsc;
|
|
bus_dma_segment_t *segs;
|
|
int nsegs;
|
|
int error;
|
|
{
|
|
struct gem_rxsoft *rxs = (struct gem_rxsoft *)xsc;
|
|
|
|
if (error != 0)
|
|
return;
|
|
if (nsegs != 1) {
|
|
/* can't happen... */
|
|
panic("gem_rxdma_callback: bad control buffer segment count");
|
|
}
|
|
rxs->rxs_paddr = segs[0].ds_addr;
|
|
}
|
|
|
|
/*
|
|
* This is called multiple times in our version of dmamap_load_mbuf, but should
|
|
* be fit for a generic version that only calls it once.
|
|
*/
|
|
static void
|
|
gem_txdma_callback(xsc, segs, nsegs, error)
|
|
void *xsc;
|
|
bus_dma_segment_t *segs;
|
|
int nsegs;
|
|
int error;
|
|
{
|
|
struct gem_txdma *tx = (struct gem_txdma *)xsc;
|
|
int seg;
|
|
|
|
tx->txd_error = error;
|
|
if (error != 0)
|
|
return;
|
|
tx->txd_nsegs = nsegs;
|
|
|
|
/*
|
|
* Initialize the transmit descriptors.
|
|
*/
|
|
for (seg = 0; seg < nsegs;
|
|
seg++, tx->txd_nexttx = GEM_NEXTTX(tx->txd_nexttx)) {
|
|
uint64_t flags;
|
|
|
|
DPRINTF(tx->txd_sc, ("txdma_cb: mapping seg %d (txd %d), len "
|
|
"%lx, addr %#lx (%#lx)\n", seg, tx->txd_nexttx,
|
|
segs[seg].ds_len, segs[seg].ds_addr,
|
|
GEM_DMA_WRITE(tx->txd_sc, segs[seg].ds_addr)));
|
|
CTR5(KTR_GEM, "txdma_cb: mapping seg %d (txd %d), len "
|
|
"%lx, addr %#lx (%#lx)", seg, tx->txd_nexttx,
|
|
segs[seg].ds_len, segs[seg].ds_addr,
|
|
GEM_DMA_WRITE(tx->txd_sc, segs[seg].ds_addr));
|
|
/*
|
|
* If this is the first descriptor we're
|
|
* enqueueing, set the start of packet flag,
|
|
* and the checksum stuff if we want the hardware
|
|
* to do it.
|
|
*/
|
|
tx->txd_sc->sc_txdescs[tx->txd_nexttx].gd_addr =
|
|
GEM_DMA_WRITE(tx->txd_sc, segs[seg].ds_addr);
|
|
flags = segs[seg].ds_len & GEM_TD_BUFSIZE;
|
|
if ((tx->txd_flags & GTXD_FIRST) != 0 && seg == 0) {
|
|
CTR2(KTR_GEM, "txdma_cb: start of packet at seg %d, "
|
|
"tx %d", seg, tx->txd_nexttx);
|
|
flags |= GEM_TD_START_OF_PACKET;
|
|
}
|
|
if ((tx->txd_flags & GTXD_LAST) != 0 && seg == nsegs - 1) {
|
|
CTR2(KTR_GEM, "txdma_cb: end of packet at seg %d, "
|
|
"tx %d", seg, tx->txd_nexttx);
|
|
flags |= GEM_TD_END_OF_PACKET;
|
|
}
|
|
tx->txd_sc->sc_txdescs[tx->txd_nexttx].gd_flags =
|
|
GEM_DMA_WRITE(tx->txd_sc, flags);
|
|
tx->txd_lasttx = tx->txd_nexttx;
|
|
}
|
|
}
|
|
|
|
static void
|
|
gem_tick(arg)
|
|
void *arg;
|
|
{
|
|
struct gem_softc *sc = arg;
|
|
int s;
|
|
|
|
s = splnet();
|
|
mii_tick(sc->sc_mii);
|
|
splx(s);
|
|
|
|
callout_reset(&sc->sc_tick_ch, hz, gem_tick, sc);
|
|
}
|
|
|
|
static int
|
|
gem_bitwait(sc, r, clr, set)
|
|
struct gem_softc *sc;
|
|
bus_addr_t r;
|
|
u_int32_t clr;
|
|
u_int32_t set;
|
|
{
|
|
int i;
|
|
u_int32_t reg;
|
|
|
|
for (i = TRIES; i--; DELAY(100)) {
|
|
reg = bus_space_read_4(sc->sc_bustag, sc->sc_h, r);
|
|
if ((r & clr) == 0 && (r & set) == set)
|
|
return (1);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
void
|
|
gem_reset(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t h = sc->sc_h;
|
|
int s;
|
|
|
|
s = splnet();
|
|
DPRINTF(sc, ("%s: gem_reset\n", device_get_name(sc->sc_dev)));
|
|
CTR1(KTR_GEM, "%s: gem_reset", device_get_name(sc->sc_dev));
|
|
gem_reset_rx(sc);
|
|
gem_reset_tx(sc);
|
|
|
|
/* Do a full reset */
|
|
bus_space_write_4(t, h, GEM_RESET, GEM_RESET_RX | GEM_RESET_TX);
|
|
if (!gem_bitwait(sc, GEM_RESET, GEM_RESET_RX | GEM_RESET_TX, 0))
|
|
device_printf(sc->sc_dev, "cannot reset device\n");
|
|
splx(s);
|
|
}
|
|
|
|
|
|
/*
|
|
* gem_rxdrain:
|
|
*
|
|
* Drain the receive queue.
|
|
*/
|
|
static void
|
|
gem_rxdrain(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
struct gem_rxsoft *rxs;
|
|
int i;
|
|
|
|
for (i = 0; i < GEM_NRXDESC; i++) {
|
|
rxs = &sc->sc_rxsoft[i];
|
|
if (rxs->rxs_mbuf != NULL) {
|
|
bus_dmamap_unload(sc->sc_dmatag, rxs->rxs_dmamap);
|
|
m_freem(rxs->rxs_mbuf);
|
|
rxs->rxs_mbuf = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Reset the whole thing.
|
|
*/
|
|
static void
|
|
gem_stop(ifp, disable)
|
|
struct ifnet *ifp;
|
|
int disable;
|
|
{
|
|
struct gem_softc *sc = (struct gem_softc *)ifp->if_softc;
|
|
struct gem_txsoft *txs;
|
|
|
|
DPRINTF(sc, ("%s: gem_stop\n", device_get_name(sc->sc_dev)));
|
|
CTR1(KTR_GEM, "%s: gem_stop", device_get_name(sc->sc_dev));
|
|
|
|
callout_stop(&sc->sc_tick_ch);
|
|
|
|
/* XXX - Should we reset these instead? */
|
|
gem_disable_tx(sc);
|
|
gem_disable_rx(sc);
|
|
|
|
/*
|
|
* Release any queued transmit buffers.
|
|
*/
|
|
while ((txs = STAILQ_FIRST(&sc->sc_txdirtyq)) != NULL) {
|
|
STAILQ_REMOVE_HEAD(&sc->sc_txdirtyq, txs_q);
|
|
if (txs->txs_ndescs != 0) {
|
|
bus_dmamap_unload(sc->sc_dmatag, txs->txs_dmamap);
|
|
if (txs->txs_mbuf != NULL) {
|
|
m_freem(txs->txs_mbuf);
|
|
txs->txs_mbuf = NULL;
|
|
}
|
|
}
|
|
STAILQ_INSERT_TAIL(&sc->sc_txfreeq, txs, txs_q);
|
|
}
|
|
|
|
if (disable)
|
|
gem_rxdrain(sc);
|
|
|
|
/*
|
|
* Mark the interface down and cancel the watchdog timer.
|
|
*/
|
|
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
|
|
ifp->if_timer = 0;
|
|
}
|
|
|
|
/*
|
|
* Reset the receiver
|
|
*/
|
|
int
|
|
gem_reset_rx(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t h = sc->sc_h;
|
|
|
|
/*
|
|
* Resetting while DMA is in progress can cause a bus hang, so we
|
|
* disable DMA first.
|
|
*/
|
|
gem_disable_rx(sc);
|
|
bus_space_write_4(t, h, GEM_RX_CONFIG, 0);
|
|
/* Wait till it finishes */
|
|
if (!gem_bitwait(sc, GEM_RX_CONFIG, 1, 0))
|
|
device_printf(sc->sc_dev, "cannot disable read dma\n");
|
|
|
|
/* Wait 5ms extra. */
|
|
DELAY(5000);
|
|
|
|
/* Finally, reset the ERX */
|
|
bus_space_write_4(t, h, GEM_RESET, GEM_RESET_RX);
|
|
/* Wait till it finishes */
|
|
if (!gem_bitwait(sc, GEM_RESET, GEM_RESET_TX, 0)) {
|
|
device_printf(sc->sc_dev, "cannot reset receiver\n");
|
|
return (1);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
|
|
/*
|
|
* Reset the transmitter
|
|
*/
|
|
static int
|
|
gem_reset_tx(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t h = sc->sc_h;
|
|
int i;
|
|
|
|
/*
|
|
* Resetting while DMA is in progress can cause a bus hang, so we
|
|
* disable DMA first.
|
|
*/
|
|
gem_disable_tx(sc);
|
|
bus_space_write_4(t, h, GEM_TX_CONFIG, 0);
|
|
/* Wait till it finishes */
|
|
if (!gem_bitwait(sc, GEM_TX_CONFIG, 1, 0))
|
|
device_printf(sc->sc_dev, "cannot disable read dma\n");
|
|
|
|
/* Wait 5ms extra. */
|
|
DELAY(5000);
|
|
|
|
/* Finally, reset the ETX */
|
|
bus_space_write_4(t, h, GEM_RESET, GEM_RESET_TX);
|
|
/* Wait till it finishes */
|
|
for (i = TRIES; i--; DELAY(100))
|
|
if ((bus_space_read_4(t, h, GEM_RESET) & GEM_RESET_TX) == 0)
|
|
break;
|
|
if (!gem_bitwait(sc, GEM_RESET, GEM_RESET_TX, 0)) {
|
|
device_printf(sc->sc_dev, "cannot reset receiver\n");
|
|
return (1);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* disable receiver.
|
|
*/
|
|
static int
|
|
gem_disable_rx(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t h = sc->sc_h;
|
|
u_int32_t cfg;
|
|
|
|
/* Flip the enable bit */
|
|
cfg = bus_space_read_4(t, h, GEM_MAC_RX_CONFIG);
|
|
cfg &= ~GEM_MAC_RX_ENABLE;
|
|
bus_space_write_4(t, h, GEM_MAC_RX_CONFIG, cfg);
|
|
|
|
/* Wait for it to finish */
|
|
return (gem_bitwait(sc, GEM_MAC_RX_CONFIG, GEM_MAC_RX_ENABLE, 0));
|
|
}
|
|
|
|
/*
|
|
* disable transmitter.
|
|
*/
|
|
static int
|
|
gem_disable_tx(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t h = sc->sc_h;
|
|
u_int32_t cfg;
|
|
|
|
/* Flip the enable bit */
|
|
cfg = bus_space_read_4(t, h, GEM_MAC_TX_CONFIG);
|
|
cfg &= ~GEM_MAC_TX_ENABLE;
|
|
bus_space_write_4(t, h, GEM_MAC_TX_CONFIG, cfg);
|
|
|
|
/* Wait for it to finish */
|
|
return (gem_bitwait(sc, GEM_MAC_TX_CONFIG, GEM_MAC_TX_ENABLE, 0));
|
|
}
|
|
|
|
/*
|
|
* Initialize interface.
|
|
*/
|
|
static int
|
|
gem_meminit(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
struct gem_rxsoft *rxs;
|
|
int i, error;
|
|
|
|
/*
|
|
* Initialize the transmit descriptor ring.
|
|
*/
|
|
memset((void *)sc->sc_txdescs, 0, sizeof(sc->sc_txdescs));
|
|
for (i = 0; i < GEM_NTXDESC; i++) {
|
|
sc->sc_txdescs[i].gd_flags = 0;
|
|
sc->sc_txdescs[i].gd_addr = 0;
|
|
}
|
|
GEM_CDTXSYNC(sc, 0, GEM_NTXDESC,
|
|
BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
|
|
sc->sc_txfree = GEM_NTXDESC;
|
|
sc->sc_txnext = 0;
|
|
|
|
/*
|
|
* Initialize the receive descriptor and receive job
|
|
* descriptor rings.
|
|
*/
|
|
for (i = 0; i < GEM_NRXDESC; i++) {
|
|
rxs = &sc->sc_rxsoft[i];
|
|
if (rxs->rxs_mbuf == NULL) {
|
|
if ((error = gem_add_rxbuf(sc, i)) != 0) {
|
|
device_printf(sc->sc_dev, "unable to "
|
|
"allocate or map rx buffer %d, error = "
|
|
"%d\n", i, error);
|
|
/*
|
|
* XXX Should attempt to run with fewer receive
|
|
* XXX buffers instead of just failing.
|
|
*/
|
|
gem_rxdrain(sc);
|
|
return (1);
|
|
}
|
|
} else
|
|
GEM_INIT_RXDESC(sc, i);
|
|
}
|
|
sc->sc_rxptr = 0;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
gem_ringsize(sz)
|
|
int sz;
|
|
{
|
|
int v = 0;
|
|
|
|
switch (sz) {
|
|
case 32:
|
|
v = GEM_RING_SZ_32;
|
|
break;
|
|
case 64:
|
|
v = GEM_RING_SZ_64;
|
|
break;
|
|
case 128:
|
|
v = GEM_RING_SZ_128;
|
|
break;
|
|
case 256:
|
|
v = GEM_RING_SZ_256;
|
|
break;
|
|
case 512:
|
|
v = GEM_RING_SZ_512;
|
|
break;
|
|
case 1024:
|
|
v = GEM_RING_SZ_1024;
|
|
break;
|
|
case 2048:
|
|
v = GEM_RING_SZ_2048;
|
|
break;
|
|
case 4096:
|
|
v = GEM_RING_SZ_4096;
|
|
break;
|
|
case 8192:
|
|
v = GEM_RING_SZ_8192;
|
|
break;
|
|
default:
|
|
printf("gem: invalid Receive Descriptor ring size\n");
|
|
break;
|
|
}
|
|
return (v);
|
|
}
|
|
|
|
/*
|
|
* Initialization of interface; set up initialization block
|
|
* and transmit/receive descriptor rings.
|
|
*/
|
|
static void
|
|
gem_init(xsc)
|
|
void *xsc;
|
|
{
|
|
struct gem_softc *sc = (struct gem_softc *)xsc;
|
|
struct ifnet *ifp = &sc->sc_arpcom.ac_if;
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t h = sc->sc_h;
|
|
int s;
|
|
u_int32_t v;
|
|
|
|
s = splnet();
|
|
|
|
DPRINTF(sc, ("%s: gem_init: calling stop\n", device_get_name(sc->sc_dev)));
|
|
CTR1(KTR_GEM, "%s: gem_init: calling stop", device_get_name(sc->sc_dev));
|
|
/*
|
|
* Initialization sequence. The numbered steps below correspond
|
|
* to the sequence outlined in section 6.3.5.1 in the Ethernet
|
|
* Channel Engine manual (part of the PCIO manual).
|
|
* See also the STP2002-STQ document from Sun Microsystems.
|
|
*/
|
|
|
|
/* step 1 & 2. Reset the Ethernet Channel */
|
|
gem_stop(&sc->sc_arpcom.ac_if, 0);
|
|
gem_reset(sc);
|
|
DPRINTF(sc, ("%s: gem_init: restarting\n", device_get_name(sc->sc_dev)));
|
|
CTR1(KTR_GEM, "%s: gem_init: restarting", device_get_name(sc->sc_dev));
|
|
|
|
/* Re-initialize the MIF */
|
|
gem_mifinit(sc);
|
|
|
|
/* Call MI reset function if any */
|
|
if (sc->sc_hwreset)
|
|
(*sc->sc_hwreset)(sc);
|
|
|
|
/* step 3. Setup data structures in host memory */
|
|
gem_meminit(sc);
|
|
|
|
/* step 4. TX MAC registers & counters */
|
|
gem_init_regs(sc);
|
|
/* XXX: VLAN code from NetBSD temporarily removed. */
|
|
bus_space_write_4(t, h, GEM_MAC_MAC_MAX_FRAME,
|
|
(ETHER_MAX_LEN + sizeof(struct ether_header)) | (0x2000<<16));
|
|
|
|
/* step 5. RX MAC registers & counters */
|
|
gem_setladrf(sc);
|
|
|
|
/* step 6 & 7. Program Descriptor Ring Base Addresses */
|
|
/* NOTE: we use only 32-bit DMA addresses here. */
|
|
bus_space_write_4(t, h, GEM_TX_RING_PTR_HI, 0);
|
|
bus_space_write_4(t, h, GEM_TX_RING_PTR_LO, GEM_CDTXADDR(sc, 0));
|
|
|
|
bus_space_write_4(t, h, GEM_RX_RING_PTR_HI, 0);
|
|
bus_space_write_4(t, h, GEM_RX_RING_PTR_LO, GEM_CDRXADDR(sc, 0));
|
|
DPRINTF(sc, ("loading rx ring %lx, tx ring %lx, cddma %lx\n",
|
|
GEM_CDRXADDR(sc, 0), GEM_CDTXADDR(sc, 0), sc->sc_cddma));
|
|
CTR3(KTR_GEM, "loading rx ring %lx, tx ring %lx, cddma %lx",
|
|
GEM_CDRXADDR(sc, 0), GEM_CDTXADDR(sc, 0), sc->sc_cddma);
|
|
|
|
/* step 8. Global Configuration & Interrupt Mask */
|
|
bus_space_write_4(t, h, GEM_INTMASK,
|
|
~(GEM_INTR_TX_INTME|
|
|
GEM_INTR_TX_EMPTY|
|
|
GEM_INTR_RX_DONE|GEM_INTR_RX_NOBUF|
|
|
GEM_INTR_RX_TAG_ERR|GEM_INTR_PCS|
|
|
GEM_INTR_MAC_CONTROL|GEM_INTR_MIF|
|
|
GEM_INTR_BERR));
|
|
bus_space_write_4(t, h, GEM_MAC_RX_MASK, 0); /* XXXX */
|
|
bus_space_write_4(t, h, GEM_MAC_TX_MASK, 0xffff); /* XXXX */
|
|
bus_space_write_4(t, h, GEM_MAC_CONTROL_MASK, 0); /* XXXX */
|
|
|
|
/* step 9. ETX Configuration: use mostly default values */
|
|
|
|
/* Enable DMA */
|
|
v = gem_ringsize(GEM_NTXDESC /*XXX*/);
|
|
bus_space_write_4(t, h, GEM_TX_CONFIG,
|
|
v|GEM_TX_CONFIG_TXDMA_EN|
|
|
((0x400<<10)&GEM_TX_CONFIG_TXFIFO_TH));
|
|
|
|
/* step 10. ERX Configuration */
|
|
|
|
/* Encode Receive Descriptor ring size: four possible values */
|
|
v = gem_ringsize(GEM_NRXDESC /*XXX*/);
|
|
|
|
/* Enable DMA */
|
|
bus_space_write_4(t, h, GEM_RX_CONFIG,
|
|
v|(GEM_THRSH_1024<<GEM_RX_CONFIG_FIFO_THRS_SHIFT)|
|
|
(2<<GEM_RX_CONFIG_FBOFF_SHFT)|GEM_RX_CONFIG_RXDMA_EN|
|
|
(0<<GEM_RX_CONFIG_CXM_START_SHFT));
|
|
/*
|
|
* The following value is for an OFF Threshold of about 15.5 Kbytes
|
|
* and an ON Threshold of 4K bytes.
|
|
*/
|
|
bus_space_write_4(t, h, GEM_RX_PAUSE_THRESH, 0xf8 | (0x40 << 12));
|
|
bus_space_write_4(t, h, GEM_RX_BLANKING, (2<<12)|6);
|
|
|
|
/* step 11. Configure Media */
|
|
(void)gem_mii_statchg(sc->sc_dev);
|
|
|
|
/* step 12. RX_MAC Configuration Register */
|
|
v = bus_space_read_4(t, h, GEM_MAC_RX_CONFIG);
|
|
v |= GEM_MAC_RX_ENABLE;
|
|
bus_space_write_4(t, h, GEM_MAC_RX_CONFIG, v);
|
|
|
|
/* step 14. Issue Transmit Pending command */
|
|
|
|
/* Call MI initialization function if any */
|
|
if (sc->sc_hwinit)
|
|
(*sc->sc_hwinit)(sc);
|
|
|
|
/* step 15. Give the reciever a swift kick */
|
|
bus_space_write_4(t, h, GEM_RX_KICK, GEM_NRXDESC-4);
|
|
|
|
/* Start the one second timer. */
|
|
callout_reset(&sc->sc_tick_ch, hz, gem_tick, sc);
|
|
|
|
ifp->if_flags |= IFF_RUNNING;
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
ifp->if_timer = 0;
|
|
sc->sc_flags = ifp->if_flags;
|
|
splx(s);
|
|
}
|
|
|
|
/*
|
|
* XXX: This is really a substitute for bus_dmamap_load_mbuf(), which FreeBSD
|
|
* does not yet have, with some adaptions for this driver.
|
|
* Some changes are mandated by the fact that multiple maps may needed to map
|
|
* a single mbuf.
|
|
* It should be removed once generic support is available.
|
|
*
|
|
* This is derived from NetBSD (syssrc/sys/arch/sparc64/sparc64/machdep.c), for
|
|
* a copyright notice see sparc64/sparc64/bus_machdep.c.
|
|
*
|
|
* Not every error condition is passed to the callback in this version, and the
|
|
* callback may be called more than once.
|
|
* It also gropes in the entails of the callback arg...
|
|
*/
|
|
static int
|
|
gem_dmamap_load_mbuf(sc, m0, cb, txj, flags)
|
|
struct gem_softc *sc;
|
|
struct mbuf *m0;
|
|
bus_dmamap_callback_t *cb;
|
|
struct gem_txjob *txj;
|
|
int flags;
|
|
{
|
|
struct gem_txdma txd;
|
|
struct gem_txsoft *txs;
|
|
struct mbuf *m;
|
|
void *vaddr;
|
|
int error, first = 1, len, totlen;
|
|
|
|
if ((m0->m_flags & M_PKTHDR) == 0)
|
|
panic("gem_dmamap_load_mbuf: no packet header");
|
|
totlen = m0->m_pkthdr.len;
|
|
len = 0;
|
|
txd.txd_sc = sc;
|
|
txd.txd_nexttx = txj->txj_nexttx;
|
|
txj->txj_nsegs = 0;
|
|
STAILQ_INIT(&txj->txj_txsq);
|
|
m = m0;
|
|
while (m != NULL && len < totlen) {
|
|
if (m->m_len == 0)
|
|
continue;
|
|
/* Get a work queue entry. */
|
|
if ((txs = STAILQ_FIRST(&sc->sc_txfreeq)) == NULL) {
|
|
/*
|
|
* Ran out of descriptors, return a value that
|
|
* cannot be returned by bus_dmamap_load to notify
|
|
* the caller.
|
|
*/
|
|
error = -1;
|
|
goto fail;
|
|
}
|
|
len += m->m_len;
|
|
txd.txd_flags = first ? GTXD_FIRST : 0;
|
|
if (m->m_next == NULL || len >= totlen)
|
|
txd.txd_flags |= GTXD_LAST;
|
|
vaddr = mtod(m, void *);
|
|
error = bus_dmamap_load(sc->sc_dmatag, txs->txs_dmamap, vaddr,
|
|
m->m_len, cb, &txd, flags);
|
|
if (error != 0 || txd.txd_error != 0)
|
|
goto fail;
|
|
/* Sync the DMA map. */
|
|
bus_dmamap_sync(sc->sc_dmatag, txs->txs_dmamap,
|
|
BUS_DMASYNC_PREWRITE);
|
|
m = m->m_next;
|
|
/*
|
|
* Store a pointer to the packet so we can free it later,
|
|
* and remember what txdirty will be once the packet is
|
|
* done.
|
|
*/
|
|
txs->txs_mbuf = first ? m0 : NULL;
|
|
txs->txs_firstdesc = txj->txj_nexttx;
|
|
txs->txs_lastdesc = txd.txd_lasttx;
|
|
txs->txs_ndescs = txd.txd_nsegs;
|
|
CTR3(KTR_GEM, "load_mbuf: setting firstdesc=%d, lastdesc=%d, "
|
|
"ndescs=%d", txs->txs_firstdesc, txs->txs_lastdesc,
|
|
txs->txs_ndescs);
|
|
STAILQ_REMOVE_HEAD(&sc->sc_txfreeq, txs_q);
|
|
STAILQ_INSERT_TAIL(&txj->txj_txsq, txs, txs_q);
|
|
txj->txj_nexttx = txd.txd_nexttx;
|
|
txj->txj_nsegs += txd.txd_nsegs;
|
|
first = 0;
|
|
}
|
|
txj->txj_lasttx = txd.txd_lasttx;
|
|
return (0);
|
|
|
|
fail:
|
|
CTR1(KTR_GEM, "gem_dmamap_load_mbuf failed (%d)", error);
|
|
gem_dmamap_unload_mbuf(sc, txj);
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Unload an mbuf using the txd the information was placed in.
|
|
* The tx interrupt code frees the tx segments one by one, because the txd is
|
|
* not available any more.
|
|
*/
|
|
static void
|
|
gem_dmamap_unload_mbuf(sc, txj)
|
|
struct gem_softc *sc;
|
|
struct gem_txjob *txj;
|
|
{
|
|
struct gem_txsoft *txs;
|
|
|
|
/* Readd the removed descriptors and unload the segments. */
|
|
while ((txs = STAILQ_FIRST(&txj->txj_txsq)) != NULL) {
|
|
bus_dmamap_unload(sc->sc_dmatag, txs->txs_dmamap);
|
|
STAILQ_REMOVE_HEAD(&txj->txj_txsq, txs_q);
|
|
STAILQ_INSERT_TAIL(&sc->sc_txfreeq, txs, txs_q);
|
|
}
|
|
}
|
|
|
|
static void
|
|
gem_dmamap_commit_mbuf(sc, txj)
|
|
struct gem_softc *sc;
|
|
struct gem_txjob *txj;
|
|
{
|
|
struct gem_txsoft *txs;
|
|
|
|
/* Commit the txjob by transfering the txsoft's to the txdirtyq. */
|
|
while ((txs = STAILQ_FIRST(&txj->txj_txsq)) != NULL) {
|
|
STAILQ_REMOVE_HEAD(&txj->txj_txsq, txs_q);
|
|
STAILQ_INSERT_TAIL(&sc->sc_txdirtyq, txs, txs_q);
|
|
}
|
|
}
|
|
|
|
static void
|
|
gem_init_regs(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
struct ifnet *ifp = &sc->sc_arpcom.ac_if;
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t h = sc->sc_h;
|
|
|
|
/* These regs are not cleared on reset */
|
|
sc->sc_inited = 0;
|
|
if (!sc->sc_inited) {
|
|
|
|
/* Wooo. Magic values. */
|
|
bus_space_write_4(t, h, GEM_MAC_IPG0, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_IPG1, 8);
|
|
bus_space_write_4(t, h, GEM_MAC_IPG2, 4);
|
|
|
|
bus_space_write_4(t, h, GEM_MAC_MAC_MIN_FRAME, ETHER_MIN_LEN);
|
|
/* Max frame and max burst size */
|
|
bus_space_write_4(t, h, GEM_MAC_MAC_MAX_FRAME,
|
|
(ifp->if_mtu+18) | (0x2000<<16)/* Burst size */);
|
|
bus_space_write_4(t, h, GEM_MAC_PREAMBLE_LEN, 0x7);
|
|
bus_space_write_4(t, h, GEM_MAC_JAM_SIZE, 0x4);
|
|
bus_space_write_4(t, h, GEM_MAC_ATTEMPT_LIMIT, 0x10);
|
|
/* Dunno.... */
|
|
bus_space_write_4(t, h, GEM_MAC_CONTROL_TYPE, 0x8088);
|
|
bus_space_write_4(t, h, GEM_MAC_RANDOM_SEED,
|
|
((sc->sc_arpcom.ac_enaddr[5]<<8)|
|
|
sc->sc_arpcom.ac_enaddr[4])&0x3ff);
|
|
/* Secondary MAC addr set to 0:0:0:0:0:0 */
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR3, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR4, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR5, 0);
|
|
/* MAC control addr set to 0:1:c2:0:1:80 */
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR6, 0x0001);
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR7, 0xc200);
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR8, 0x0180);
|
|
|
|
/* MAC filter addr set to 0:0:0:0:0:0 */
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR_FILTER0, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR_FILTER1, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR_FILTER2, 0);
|
|
|
|
bus_space_write_4(t, h, GEM_MAC_ADR_FLT_MASK1_2, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_ADR_FLT_MASK0, 0);
|
|
|
|
sc->sc_inited = 1;
|
|
}
|
|
|
|
/* Counters need to be zeroed */
|
|
bus_space_write_4(t, h, GEM_MAC_NORM_COLL_CNT, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_FIRST_COLL_CNT, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_EXCESS_COLL_CNT, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_LATE_COLL_CNT, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_DEFER_TMR_CNT, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_PEAK_ATTEMPTS, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_RX_FRAME_COUNT, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_RX_LEN_ERR_CNT, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_RX_ALIGN_ERR, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_RX_CRC_ERR_CNT, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_RX_CODE_VIOL, 0);
|
|
|
|
/* Un-pause stuff */
|
|
#if 0
|
|
bus_space_write_4(t, h, GEM_MAC_SEND_PAUSE_CMD, 0x1BF0);
|
|
#else
|
|
bus_space_write_4(t, h, GEM_MAC_SEND_PAUSE_CMD, 0);
|
|
#endif
|
|
|
|
/*
|
|
* Set the station address.
|
|
*/
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR0,
|
|
(sc->sc_arpcom.ac_enaddr[4]<<8) | sc->sc_arpcom.ac_enaddr[5]);
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR1,
|
|
(sc->sc_arpcom.ac_enaddr[2]<<8) | sc->sc_arpcom.ac_enaddr[3]);
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR2,
|
|
(sc->sc_arpcom.ac_enaddr[0]<<8) | sc->sc_arpcom.ac_enaddr[1]);
|
|
}
|
|
|
|
static void
|
|
gem_start(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct gem_softc *sc = (struct gem_softc *)ifp->if_softc;
|
|
struct mbuf *m0 = NULL, *m;
|
|
struct gem_txjob txj;
|
|
int firsttx, ofree, seg, ntx, txmfail;
|
|
|
|
if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING)
|
|
return;
|
|
|
|
/*
|
|
* Remember the previous number of free descriptors and
|
|
* the first descriptor we'll use.
|
|
*/
|
|
ofree = sc->sc_txfree;
|
|
firsttx = sc->sc_txnext;
|
|
|
|
DPRINTF(sc, ("%s: gem_start: txfree %d, txnext %d\n",
|
|
device_get_name(sc->sc_dev), ofree, firsttx));
|
|
CTR3(KTR_GEM, "%s: gem_start: txfree %d, txnext %d",
|
|
device_get_name(sc->sc_dev), ofree, firsttx);
|
|
|
|
txj.txj_nexttx = firsttx;
|
|
txj.txj_lasttx = 0;
|
|
/*
|
|
* Loop through the send queue, setting up transmit descriptors
|
|
* until we drain the queue, or use up all available transmit
|
|
* descriptors.
|
|
*/
|
|
txmfail = 0;
|
|
for (ntx = 0;; ntx++) {
|
|
/*
|
|
* Grab a packet off the queue.
|
|
*/
|
|
IF_DEQUEUE(&ifp->if_snd, m0);
|
|
if (m0 == NULL)
|
|
break;
|
|
m = NULL;
|
|
|
|
/*
|
|
* Load the DMA map. If this fails, the packet either
|
|
* didn't fit in the alloted number of segments, or we were
|
|
* short on resources. In this case, we'll copy and try
|
|
* again.
|
|
*/
|
|
txmfail = gem_dmamap_load_mbuf(sc, m0,
|
|
gem_txdma_callback, &txj, BUS_DMA_NOWAIT);
|
|
if (txmfail == -1) {
|
|
IF_PREPEND(&ifp->if_snd, m0);
|
|
break;
|
|
}
|
|
if (txmfail > 0) {
|
|
MGETHDR(m, M_DONTWAIT, MT_DATA);
|
|
if (m == NULL) {
|
|
device_printf(sc->sc_dev, "unable to "
|
|
"allocate Tx mbuf\n");
|
|
/* Failed; requeue. */
|
|
IF_PREPEND(&ifp->if_snd, m0);
|
|
break;
|
|
}
|
|
if (m0->m_pkthdr.len > MHLEN) {
|
|
MCLGET(m, M_DONTWAIT);
|
|
if ((m->m_flags & M_EXT) == 0) {
|
|
device_printf(sc->sc_dev, "unable to "
|
|
"allocate Tx cluster\n");
|
|
IF_PREPEND(&ifp->if_snd, m0);
|
|
m_freem(m);
|
|
break;
|
|
}
|
|
}
|
|
m_copydata(m0, 0, m0->m_pkthdr.len, mtod(m, caddr_t));
|
|
m->m_pkthdr.len = m->m_len = m0->m_pkthdr.len;
|
|
txmfail = gem_dmamap_load_mbuf(sc, m,
|
|
gem_txdma_callback, &txj, BUS_DMA_NOWAIT);
|
|
if (txmfail != 0) {
|
|
if (txmfail > 0) {
|
|
device_printf(sc->sc_dev, "unable to "
|
|
"load Tx buffer, error = %d\n",
|
|
txmfail);
|
|
}
|
|
m_freem(m);
|
|
IF_PREPEND(&ifp->if_snd, m0);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Ensure we have enough descriptors free to describe
|
|
* the packet. Note, we always reserve one descriptor
|
|
* at the end of the ring as a termination point, to
|
|
* prevent wrap-around.
|
|
*/
|
|
if (txj.txj_nsegs > (sc->sc_txfree - 1)) {
|
|
/*
|
|
* Not enough free descriptors to transmit this
|
|
* packet. We haven't committed to anything yet,
|
|
* so just unload the DMA map, put the packet
|
|
* back on the queue, and punt. Notify the upper
|
|
* layer that there are no more slots left.
|
|
*
|
|
* XXX We could allocate an mbuf and copy, but
|
|
* XXX it is worth it?
|
|
*/
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
gem_dmamap_unload_mbuf(sc, &txj);
|
|
if (m != NULL)
|
|
m_freem(m);
|
|
IF_PREPEND(&ifp->if_snd, m0);
|
|
break;
|
|
}
|
|
|
|
if (m != NULL)
|
|
m_freem(m0);
|
|
|
|
/*
|
|
* WE ARE NOW COMMITTED TO TRANSMITTING THE PACKET.
|
|
*/
|
|
|
|
#ifdef GEM_DEBUG
|
|
if (ifp->if_flags & IFF_DEBUG) {
|
|
printf(" gem_start %p transmit chain:\n",
|
|
STAILQ_FIRST(&txj.txj_txsq));
|
|
for (seg = sc->sc_txnext;; seg = GEM_NEXTTX(seg)) {
|
|
printf("descriptor %d:\t", seg);
|
|
printf("gd_flags: 0x%016llx\t", (long long)
|
|
GEM_DMA_READ(sc, sc->sc_txdescs[seg].gd_flags));
|
|
printf("gd_addr: 0x%016llx\n", (long long)
|
|
GEM_DMA_READ(sc, sc->sc_txdescs[seg].gd_addr));
|
|
if (seg == txj.txj_lasttx)
|
|
break;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/* Sync the descriptors we're using. */
|
|
GEM_CDTXSYNC(sc, sc->sc_txnext, txj.txj_nsegs,
|
|
BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
|
|
|
|
/* Advance the tx pointer. */
|
|
sc->sc_txfree -= txj.txj_nsegs;
|
|
sc->sc_txnext = txj.txj_nexttx;
|
|
|
|
gem_dmamap_commit_mbuf(sc, &txj);
|
|
}
|
|
|
|
if (txmfail == -1 || sc->sc_txfree == 0) {
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
/* No more slots left; notify upper layer. */
|
|
}
|
|
|
|
if (ntx > 0) {
|
|
DPRINTF(sc, ("%s: packets enqueued, IC on %d, OWN on %d\n",
|
|
device_get_name(sc->sc_dev), txj.txj_lasttx, firsttx));
|
|
CTR3(KTR_GEM, "%s: packets enqueued, IC on %d, OWN on %d",
|
|
device_get_name(sc->sc_dev), txj.txj_lasttx, firsttx);
|
|
/*
|
|
* The entire packet chain is set up.
|
|
* Kick the transmitter.
|
|
*/
|
|
DPRINTF(sc, ("%s: gem_start: kicking tx %d\n",
|
|
device_get_name(sc->sc_dev), txj.txj_nexttx));
|
|
CTR3(KTR_GEM, "%s: gem_start: kicking tx %d=%d",
|
|
device_get_name(sc->sc_dev), txj.txj_nexttx,
|
|
sc->sc_txnext);
|
|
bus_space_write_4(sc->sc_bustag, sc->sc_h, GEM_TX_KICK,
|
|
sc->sc_txnext);
|
|
|
|
/* Set a watchdog timer in case the chip flakes out. */
|
|
ifp->if_timer = 5;
|
|
DPRINTF(sc, ("%s: gem_start: watchdog %d\n",
|
|
device_get_name(sc->sc_dev), ifp->if_timer));
|
|
CTR2(KTR_GEM, "%s: gem_start: watchdog %d",
|
|
device_get_name(sc->sc_dev), ifp->if_timer);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Transmit interrupt.
|
|
*/
|
|
static void
|
|
gem_tint(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
struct ifnet *ifp = &sc->sc_arpcom.ac_if;
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t mac = sc->sc_h;
|
|
struct gem_txsoft *txs;
|
|
int txlast;
|
|
|
|
|
|
DPRINTF(sc, ("%s: gem_tint\n", device_get_name(sc->sc_dev)));
|
|
CTR1(KTR_GEM, "%s: gem_tint", device_get_name(sc->sc_dev));
|
|
|
|
/*
|
|
* Unload collision counters
|
|
*/
|
|
ifp->if_collisions +=
|
|
bus_space_read_4(t, mac, GEM_MAC_NORM_COLL_CNT) +
|
|
bus_space_read_4(t, mac, GEM_MAC_FIRST_COLL_CNT) +
|
|
bus_space_read_4(t, mac, GEM_MAC_EXCESS_COLL_CNT) +
|
|
bus_space_read_4(t, mac, GEM_MAC_LATE_COLL_CNT);
|
|
|
|
/*
|
|
* then clear the hardware counters.
|
|
*/
|
|
bus_space_write_4(t, mac, GEM_MAC_NORM_COLL_CNT, 0);
|
|
bus_space_write_4(t, mac, GEM_MAC_FIRST_COLL_CNT, 0);
|
|
bus_space_write_4(t, mac, GEM_MAC_EXCESS_COLL_CNT, 0);
|
|
bus_space_write_4(t, mac, GEM_MAC_LATE_COLL_CNT, 0);
|
|
|
|
/*
|
|
* Go through our Tx list and free mbufs for those
|
|
* frames that have been transmitted.
|
|
*/
|
|
while ((txs = STAILQ_FIRST(&sc->sc_txdirtyq)) != NULL) {
|
|
GEM_CDTXSYNC(sc, txs->txs_lastdesc,
|
|
txs->txs_ndescs,
|
|
BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
|
|
|
|
#ifdef GEM_DEBUG
|
|
if (ifp->if_flags & IFF_DEBUG) {
|
|
int i;
|
|
printf(" txsoft %p transmit chain:\n", txs);
|
|
for (i = txs->txs_firstdesc;; i = GEM_NEXTTX(i)) {
|
|
printf("descriptor %d: ", i);
|
|
printf("gd_flags: 0x%016llx\t", (long long)
|
|
GEM_DMA_READ(sc, sc->sc_txdescs[i].gd_flags));
|
|
printf("gd_addr: 0x%016llx\n", (long long)
|
|
GEM_DMA_READ(sc, sc->sc_txdescs[i].gd_addr));
|
|
if (i == txs->txs_lastdesc)
|
|
break;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* In theory, we could harveast some descriptors before
|
|
* the ring is empty, but that's a bit complicated.
|
|
*
|
|
* GEM_TX_COMPLETION points to the last descriptor
|
|
* processed +1.
|
|
*/
|
|
txlast = bus_space_read_4(t, mac, GEM_TX_COMPLETION);
|
|
DPRINTF(sc,
|
|
("gem_tint: txs->txs_lastdesc = %d, txlast = %d\n",
|
|
txs->txs_lastdesc, txlast));
|
|
CTR3(KTR_GEM, "gem_tint: txs->txs_firstdesc = %d, "
|
|
"txs->txs_lastdesc = %d, txlast = %d",
|
|
txs->txs_firstdesc, txs->txs_lastdesc, txlast);
|
|
if (txs->txs_firstdesc <= txs->txs_lastdesc) {
|
|
if ((txlast >= txs->txs_firstdesc) &&
|
|
(txlast <= txs->txs_lastdesc))
|
|
break;
|
|
} else {
|
|
/* Ick -- this command wraps */
|
|
if ((txlast >= txs->txs_firstdesc) ||
|
|
(txlast <= txs->txs_lastdesc))
|
|
break;
|
|
}
|
|
|
|
DPRINTF(sc, ("gem_tint: releasing a desc\n"));
|
|
CTR0(KTR_GEM, "gem_tint: releasing a desc");
|
|
STAILQ_REMOVE_HEAD(&sc->sc_txdirtyq, txs_q);
|
|
|
|
sc->sc_txfree += txs->txs_ndescs;
|
|
|
|
bus_dmamap_sync(sc->sc_dmatag, txs->txs_dmamap,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(sc->sc_dmatag, txs->txs_dmamap);
|
|
if (txs->txs_mbuf != NULL) {
|
|
m_freem(txs->txs_mbuf);
|
|
txs->txs_mbuf = NULL;
|
|
}
|
|
|
|
STAILQ_INSERT_TAIL(&sc->sc_txfreeq, txs, txs_q);
|
|
|
|
ifp->if_opackets++;
|
|
}
|
|
|
|
DPRINTF(sc, ("gem_tint: GEM_TX_STATE_MACHINE %x "
|
|
"GEM_TX_DATA_PTR %llx "
|
|
"GEM_TX_COMPLETION %x\n",
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_TX_STATE_MACHINE),
|
|
((long long) bus_space_read_4(sc->sc_bustag, sc->sc_h,
|
|
GEM_TX_DATA_PTR_HI) << 32) |
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h,
|
|
GEM_TX_DATA_PTR_LO),
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_TX_COMPLETION)));
|
|
CTR3(KTR_GEM, "gem_tint: GEM_TX_STATE_MACHINE %x "
|
|
"GEM_TX_DATA_PTR %llx "
|
|
"GEM_TX_COMPLETION %x",
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_TX_STATE_MACHINE),
|
|
((long long) bus_space_read_4(sc->sc_bustag, sc->sc_h,
|
|
GEM_TX_DATA_PTR_HI) << 32) |
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h,
|
|
GEM_TX_DATA_PTR_LO),
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_TX_COMPLETION));
|
|
|
|
if (STAILQ_FIRST(&sc->sc_txdirtyq) == NULL)
|
|
ifp->if_timer = 0;
|
|
|
|
|
|
DPRINTF(sc, ("%s: gem_tint: watchdog %d\n",
|
|
device_get_name(sc->sc_dev), ifp->if_timer));
|
|
CTR2(KTR_GEM, "%s: gem_tint: watchdog %d",
|
|
device_get_name(sc->sc_dev), ifp->if_timer);
|
|
|
|
/* Freed some descriptors, so reset IFF_OACTIVE and restart. */
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
gem_start(ifp);
|
|
}
|
|
|
|
/*
|
|
* Receive interrupt.
|
|
*/
|
|
static void
|
|
gem_rint(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
struct ifnet *ifp = &sc->sc_arpcom.ac_if;
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t h = sc->sc_h;
|
|
struct ether_header *eh;
|
|
struct gem_rxsoft *rxs;
|
|
struct mbuf *m;
|
|
u_int64_t rxstat;
|
|
int i, len;
|
|
|
|
DPRINTF(sc, ("%s: gem_rint\n", device_get_name(sc->sc_dev)));
|
|
CTR1(KTR_GEM, "%s: gem_rint", device_get_name(sc->sc_dev));
|
|
/*
|
|
* XXXX Read the lastrx only once at the top for speed.
|
|
*/
|
|
DPRINTF(sc, ("gem_rint: sc->rxptr %d, complete %d\n",
|
|
sc->sc_rxptr, bus_space_read_4(t, h, GEM_RX_COMPLETION)));
|
|
CTR2(KTR_GEM, "gem_rint: sc->rxptr %d, complete %d",
|
|
sc->sc_rxptr, bus_space_read_4(t, h, GEM_RX_COMPLETION));
|
|
for (i = sc->sc_rxptr; i != bus_space_read_4(t, h, GEM_RX_COMPLETION);
|
|
i = GEM_NEXTRX(i)) {
|
|
rxs = &sc->sc_rxsoft[i];
|
|
|
|
GEM_CDRXSYNC(sc, i,
|
|
BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
|
|
|
|
rxstat = GEM_DMA_READ(sc, sc->sc_rxdescs[i].gd_flags);
|
|
|
|
if (rxstat & GEM_RD_OWN) {
|
|
printf("gem_rint: completed descriptor "
|
|
"still owned %d\n", i);
|
|
/*
|
|
* We have processed all of the receive buffers.
|
|
*/
|
|
break;
|
|
}
|
|
|
|
if (rxstat & GEM_RD_BAD_CRC) {
|
|
device_printf(sc->sc_dev, "receive error: CRC error\n");
|
|
GEM_INIT_RXDESC(sc, i);
|
|
continue;
|
|
}
|
|
|
|
bus_dmamap_sync(sc->sc_dmatag, rxs->rxs_dmamap,
|
|
BUS_DMASYNC_POSTREAD);
|
|
#ifdef GEM_DEBUG
|
|
if (ifp->if_flags & IFF_DEBUG) {
|
|
printf(" rxsoft %p descriptor %d: ", rxs, i);
|
|
printf("gd_flags: 0x%016llx\t", (long long)
|
|
GEM_DMA_READ(sc, sc->sc_rxdescs[i].gd_flags));
|
|
printf("gd_addr: 0x%016llx\n", (long long)
|
|
GEM_DMA_READ(sc, sc->sc_rxdescs[i].gd_addr));
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* No errors; receive the packet. Note the Gem
|
|
* includes the CRC with every packet.
|
|
*/
|
|
len = GEM_RD_BUFLEN(rxstat);
|
|
|
|
/*
|
|
* Allocate a new mbuf cluster. If that fails, we are
|
|
* out of memory, and must drop the packet and recycle
|
|
* the buffer that's already attached to this descriptor.
|
|
*/
|
|
m = rxs->rxs_mbuf;
|
|
if (gem_add_rxbuf(sc, i) != 0) {
|
|
ifp->if_ierrors++;
|
|
GEM_INIT_RXDESC(sc, i);
|
|
bus_dmamap_sync(sc->sc_dmatag, rxs->rxs_dmamap,
|
|
BUS_DMASYNC_PREREAD);
|
|
continue;
|
|
}
|
|
m->m_data += 2; /* We're already off by two */
|
|
|
|
ifp->if_ipackets++;
|
|
eh = mtod(m, struct ether_header *);
|
|
m->m_pkthdr.rcvif = ifp;
|
|
m->m_pkthdr.len = m->m_len = len - ETHER_CRC_LEN;
|
|
m_adj(m, sizeof(struct ether_header));
|
|
|
|
/* Pass it on. */
|
|
ether_input(ifp, eh, m);
|
|
}
|
|
|
|
/* Update the receive pointer. */
|
|
sc->sc_rxptr = i;
|
|
bus_space_write_4(t, h, GEM_RX_KICK, i);
|
|
|
|
DPRINTF(sc, ("gem_rint: done sc->rxptr %d, complete %d\n",
|
|
sc->sc_rxptr, bus_space_read_4(t, h, GEM_RX_COMPLETION)));
|
|
CTR2(KTR_GEM, "gem_rint: done sc->rxptr %d, complete %d",
|
|
sc->sc_rxptr, bus_space_read_4(t, h, GEM_RX_COMPLETION));
|
|
|
|
}
|
|
|
|
|
|
/*
|
|
* gem_add_rxbuf:
|
|
*
|
|
* Add a receive buffer to the indicated descriptor.
|
|
*/
|
|
static int
|
|
gem_add_rxbuf(sc, idx)
|
|
struct gem_softc *sc;
|
|
int idx;
|
|
{
|
|
struct gem_rxsoft *rxs = &sc->sc_rxsoft[idx];
|
|
struct mbuf *m;
|
|
int error;
|
|
|
|
MGETHDR(m, M_DONTWAIT, MT_DATA);
|
|
if (m == NULL)
|
|
return (ENOBUFS);
|
|
|
|
MCLGET(m, M_DONTWAIT);
|
|
if ((m->m_flags & M_EXT) == 0) {
|
|
m_freem(m);
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
#ifdef GEM_DEBUG
|
|
/* bzero the packet to check dma */
|
|
memset(m->m_ext.ext_buf, 0, m->m_ext.ext_size);
|
|
#endif
|
|
|
|
if (rxs->rxs_mbuf != NULL)
|
|
bus_dmamap_unload(sc->sc_dmatag, rxs->rxs_dmamap);
|
|
|
|
rxs->rxs_mbuf = m;
|
|
|
|
error = bus_dmamap_load(sc->sc_dmatag, rxs->rxs_dmamap,
|
|
m->m_ext.ext_buf, m->m_ext.ext_size, gem_rxdma_callback, rxs,
|
|
BUS_DMA_NOWAIT);
|
|
if (error != 0 || rxs->rxs_paddr == 0) {
|
|
device_printf(sc->sc_dev, "can't load rx DMA map %d, error = "
|
|
"%d\n", idx, error);
|
|
panic("gem_add_rxbuf"); /* XXX */
|
|
}
|
|
|
|
bus_dmamap_sync(sc->sc_dmatag, rxs->rxs_dmamap, BUS_DMASYNC_PREREAD);
|
|
|
|
GEM_INIT_RXDESC(sc, idx);
|
|
|
|
return (0);
|
|
}
|
|
|
|
|
|
static void
|
|
gem_eint(sc, status)
|
|
struct gem_softc *sc;
|
|
u_int status;
|
|
{
|
|
|
|
if ((status & GEM_INTR_MIF) != 0) {
|
|
device_printf(sc->sc_dev, "XXXlink status changed\n");
|
|
return;
|
|
}
|
|
|
|
device_printf(sc->sc_dev, "status=%x\n", status);
|
|
}
|
|
|
|
|
|
void
|
|
gem_intr(v)
|
|
void *v;
|
|
{
|
|
struct gem_softc *sc = (struct gem_softc *)v;
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t seb = sc->sc_h;
|
|
u_int32_t status;
|
|
|
|
status = bus_space_read_4(t, seb, GEM_STATUS);
|
|
DPRINTF(sc, ("%s: gem_intr: cplt %x, status %x\n",
|
|
device_get_name(sc->sc_dev), (status>>19),
|
|
(u_int)status));
|
|
CTR3(KTR_GEM, "%s: gem_intr: cplt %x, status %x",
|
|
device_get_name(sc->sc_dev), (status>>19),
|
|
(u_int)status);
|
|
|
|
if ((status & (GEM_INTR_RX_TAG_ERR | GEM_INTR_BERR)) != 0)
|
|
gem_eint(sc, status);
|
|
|
|
if ((status & (GEM_INTR_TX_EMPTY | GEM_INTR_TX_INTME)) != 0)
|
|
gem_tint(sc);
|
|
|
|
if ((status & (GEM_INTR_RX_DONE | GEM_INTR_RX_NOBUF)) != 0)
|
|
gem_rint(sc);
|
|
|
|
/* We should eventually do more than just print out error stats. */
|
|
if (status & GEM_INTR_TX_MAC) {
|
|
int txstat = bus_space_read_4(t, seb, GEM_MAC_TX_STATUS);
|
|
if (txstat & ~GEM_MAC_TX_XMIT_DONE)
|
|
printf("MAC tx fault, status %x\n", txstat);
|
|
}
|
|
if (status & GEM_INTR_RX_MAC) {
|
|
int rxstat = bus_space_read_4(t, seb, GEM_MAC_RX_STATUS);
|
|
if (rxstat & ~(GEM_MAC_RX_DONE | GEM_MAC_RX_FRAME_CNT))
|
|
printf("MAC rx fault, status %x\n", rxstat);
|
|
}
|
|
}
|
|
|
|
|
|
static void
|
|
gem_watchdog(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct gem_softc *sc = ifp->if_softc;
|
|
|
|
DPRINTF(sc, ("gem_watchdog: GEM_RX_CONFIG %x GEM_MAC_RX_STATUS %x "
|
|
"GEM_MAC_RX_CONFIG %x\n",
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_RX_CONFIG),
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_MAC_RX_STATUS),
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_MAC_RX_CONFIG)));
|
|
CTR3(KTR_GEM, "gem_watchdog: GEM_RX_CONFIG %x GEM_MAC_RX_STATUS %x "
|
|
"GEM_MAC_RX_CONFIG %x",
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_RX_CONFIG),
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_MAC_RX_STATUS),
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_MAC_RX_CONFIG));
|
|
CTR3(KTR_GEM, "gem_watchdog: GEM_TX_CONFIG %x GEM_MAC_TX_STATUS %x "
|
|
"GEM_MAC_TX_CONFIG %x",
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_TX_CONFIG),
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_MAC_TX_STATUS),
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_MAC_TX_CONFIG));
|
|
|
|
device_printf(sc->sc_dev, "device timeout\n");
|
|
++ifp->if_oerrors;
|
|
|
|
/* Try to get more packets going. */
|
|
gem_start(ifp);
|
|
}
|
|
|
|
/*
|
|
* Initialize the MII Management Interface
|
|
*/
|
|
static void
|
|
gem_mifinit(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t mif = sc->sc_h;
|
|
|
|
/* Configure the MIF in frame mode */
|
|
sc->sc_mif_config = bus_space_read_4(t, mif, GEM_MIF_CONFIG);
|
|
sc->sc_mif_config &= ~GEM_MIF_CONFIG_BB_ENA;
|
|
bus_space_write_4(t, mif, GEM_MIF_CONFIG, sc->sc_mif_config);
|
|
}
|
|
|
|
/*
|
|
* MII interface
|
|
*
|
|
* The GEM MII interface supports at least three different operating modes:
|
|
*
|
|
* Bitbang mode is implemented using data, clock and output enable registers.
|
|
*
|
|
* Frame mode is implemented by loading a complete frame into the frame
|
|
* register and polling the valid bit for completion.
|
|
*
|
|
* Polling mode uses the frame register but completion is indicated by
|
|
* an interrupt.
|
|
*
|
|
*/
|
|
int
|
|
gem_mii_readreg(dev, phy, reg)
|
|
device_t dev;
|
|
int phy, reg;
|
|
{
|
|
struct gem_softc *sc = device_get_softc(dev);
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t mif = sc->sc_h;
|
|
int n;
|
|
u_int32_t v;
|
|
|
|
#ifdef GEM_DEBUG_PHY
|
|
printf("gem_mii_readreg: phy %d reg %d\n", phy, reg);
|
|
#endif
|
|
|
|
#if 0
|
|
/* Select the desired PHY in the MIF configuration register */
|
|
v = bus_space_read_4(t, mif, GEM_MIF_CONFIG);
|
|
/* Clear PHY select bit */
|
|
v &= ~GEM_MIF_CONFIG_PHY_SEL;
|
|
if (phy == GEM_PHYAD_EXTERNAL)
|
|
/* Set PHY select bit to get at external device */
|
|
v |= GEM_MIF_CONFIG_PHY_SEL;
|
|
bus_space_write_4(t, mif, GEM_MIF_CONFIG, v);
|
|
#endif
|
|
|
|
/* Construct the frame command */
|
|
v = (reg << GEM_MIF_REG_SHIFT) | (phy << GEM_MIF_PHY_SHIFT) |
|
|
GEM_MIF_FRAME_READ;
|
|
|
|
bus_space_write_4(t, mif, GEM_MIF_FRAME, v);
|
|
for (n = 0; n < 100; n++) {
|
|
DELAY(1);
|
|
v = bus_space_read_4(t, mif, GEM_MIF_FRAME);
|
|
if (v & GEM_MIF_FRAME_TA0)
|
|
return (v & GEM_MIF_FRAME_DATA);
|
|
}
|
|
|
|
device_printf(sc->sc_dev, "mii_read timeout\n");
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
gem_mii_writereg(dev, phy, reg, val)
|
|
device_t dev;
|
|
int phy, reg, val;
|
|
{
|
|
struct gem_softc *sc = device_get_softc(dev);
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t mif = sc->sc_h;
|
|
int n;
|
|
u_int32_t v;
|
|
|
|
#ifdef GEM_DEBUG_PHY
|
|
printf("gem_mii_writereg: phy %d reg %d val %x\n", phy, reg, val);
|
|
#endif
|
|
|
|
#if 0
|
|
/* Select the desired PHY in the MIF configuration register */
|
|
v = bus_space_read_4(t, mif, GEM_MIF_CONFIG);
|
|
/* Clear PHY select bit */
|
|
v &= ~GEM_MIF_CONFIG_PHY_SEL;
|
|
if (phy == GEM_PHYAD_EXTERNAL)
|
|
/* Set PHY select bit to get at external device */
|
|
v |= GEM_MIF_CONFIG_PHY_SEL;
|
|
bus_space_write_4(t, mif, GEM_MIF_CONFIG, v);
|
|
#endif
|
|
/* Construct the frame command */
|
|
v = GEM_MIF_FRAME_WRITE |
|
|
(phy << GEM_MIF_PHY_SHIFT) |
|
|
(reg << GEM_MIF_REG_SHIFT) |
|
|
(val & GEM_MIF_FRAME_DATA);
|
|
|
|
bus_space_write_4(t, mif, GEM_MIF_FRAME, v);
|
|
for (n = 0; n < 100; n++) {
|
|
DELAY(1);
|
|
v = bus_space_read_4(t, mif, GEM_MIF_FRAME);
|
|
if (v & GEM_MIF_FRAME_TA0)
|
|
return (1);
|
|
}
|
|
|
|
device_printf(sc->sc_dev, "mii_write timeout\n");
|
|
return (0);
|
|
}
|
|
|
|
void
|
|
gem_mii_statchg(dev)
|
|
device_t dev;
|
|
{
|
|
struct gem_softc *sc = device_get_softc(dev);
|
|
#ifdef GEM_DEBUG
|
|
int instance = IFM_INST(sc->sc_mii->mii_media.ifm_cur->ifm_media);
|
|
#endif
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t mac = sc->sc_h;
|
|
u_int32_t v;
|
|
|
|
#ifdef GEM_DEBUG
|
|
if (sc->sc_debug)
|
|
printf("gem_mii_statchg: status change: phy = %d\n",
|
|
sc->sc_phys[instance]);
|
|
#endif
|
|
|
|
/* Set tx full duplex options */
|
|
bus_space_write_4(t, mac, GEM_MAC_TX_CONFIG, 0);
|
|
DELAY(10000); /* reg must be cleared and delay before changing. */
|
|
v = GEM_MAC_TX_ENA_IPG0|GEM_MAC_TX_NGU|GEM_MAC_TX_NGU_LIMIT|
|
|
GEM_MAC_TX_ENABLE;
|
|
if ((IFM_OPTIONS(sc->sc_mii->mii_media_active) & IFM_FDX) != 0) {
|
|
v |= GEM_MAC_TX_IGN_CARRIER|GEM_MAC_TX_IGN_COLLIS;
|
|
}
|
|
bus_space_write_4(t, mac, GEM_MAC_TX_CONFIG, v);
|
|
|
|
/* XIF Configuration */
|
|
/* We should really calculate all this rather than rely on defaults */
|
|
v = bus_space_read_4(t, mac, GEM_MAC_XIF_CONFIG);
|
|
v = GEM_MAC_XIF_LINK_LED;
|
|
v |= GEM_MAC_XIF_TX_MII_ENA;
|
|
/* If an external transceiver is connected, enable its MII drivers */
|
|
sc->sc_mif_config = bus_space_read_4(t, mac, GEM_MIF_CONFIG);
|
|
if ((sc->sc_mif_config & GEM_MIF_CONFIG_MDI1) != 0) {
|
|
/* External MII needs echo disable if half duplex. */
|
|
if ((IFM_OPTIONS(sc->sc_mii->mii_media_active) & IFM_FDX) != 0)
|
|
/* turn on full duplex LED */
|
|
v |= GEM_MAC_XIF_FDPLX_LED;
|
|
else
|
|
/* half duplex -- disable echo */
|
|
v |= GEM_MAC_XIF_ECHO_DISABL;
|
|
} else {
|
|
/* Internal MII needs buf enable */
|
|
v |= GEM_MAC_XIF_MII_BUF_ENA;
|
|
}
|
|
bus_space_write_4(t, mac, GEM_MAC_XIF_CONFIG, v);
|
|
}
|
|
|
|
int
|
|
gem_mediachange(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct gem_softc *sc = ifp->if_softc;
|
|
|
|
/* XXX Add support for serial media. */
|
|
|
|
return (mii_mediachg(sc->sc_mii));
|
|
}
|
|
|
|
void
|
|
gem_mediastatus(ifp, ifmr)
|
|
struct ifnet *ifp;
|
|
struct ifmediareq *ifmr;
|
|
{
|
|
struct gem_softc *sc = ifp->if_softc;
|
|
|
|
if ((ifp->if_flags & IFF_UP) == 0)
|
|
return;
|
|
|
|
mii_pollstat(sc->sc_mii);
|
|
ifmr->ifm_active = sc->sc_mii->mii_media_active;
|
|
ifmr->ifm_status = sc->sc_mii->mii_media_status;
|
|
}
|
|
|
|
/*
|
|
* Process an ioctl request.
|
|
*/
|
|
static int
|
|
gem_ioctl(ifp, cmd, data)
|
|
struct ifnet *ifp;
|
|
u_long cmd;
|
|
caddr_t data;
|
|
{
|
|
struct gem_softc *sc = ifp->if_softc;
|
|
struct ifreq *ifr = (struct ifreq *)data;
|
|
int s, error = 0;
|
|
|
|
switch (cmd) {
|
|
case SIOCSIFADDR:
|
|
case SIOCGIFADDR:
|
|
case SIOCSIFMTU:
|
|
error = ether_ioctl(ifp, cmd, data);
|
|
break;
|
|
case SIOCSIFFLAGS:
|
|
if (ifp->if_flags & IFF_UP) {
|
|
if ((sc->sc_flags ^ ifp->if_flags) == IFF_PROMISC)
|
|
gem_setladrf(sc);
|
|
else
|
|
gem_init(sc);
|
|
} else {
|
|
if (ifp->if_flags & IFF_RUNNING)
|
|
gem_stop(ifp, 0);
|
|
}
|
|
sc->sc_flags = ifp->if_flags;
|
|
error = 0;
|
|
break;
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
gem_setladrf(sc);
|
|
error = 0;
|
|
break;
|
|
case SIOCGIFMEDIA:
|
|
case SIOCSIFMEDIA:
|
|
error = ifmedia_ioctl(ifp, ifr, &sc->sc_mii->mii_media, cmd);
|
|
break;
|
|
default:
|
|
error = ENOTTY;
|
|
break;
|
|
}
|
|
|
|
/* Try to get things going again */
|
|
if (ifp->if_flags & IFF_UP)
|
|
gem_start(ifp);
|
|
splx(s);
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Set up the logical address filter.
|
|
*/
|
|
static void
|
|
gem_setladrf(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
struct ifnet *ifp = &sc->sc_arpcom.ac_if;
|
|
struct ifmultiaddr *inm;
|
|
struct sockaddr_dl *sdl;
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t h = sc->sc_h;
|
|
u_char *cp;
|
|
u_int32_t crc;
|
|
u_int32_t hash[16];
|
|
u_int32_t v;
|
|
int len;
|
|
|
|
/* Clear hash table */
|
|
memset(hash, 0, sizeof(hash));
|
|
|
|
/* Get current RX configuration */
|
|
v = bus_space_read_4(t, h, GEM_MAC_RX_CONFIG);
|
|
|
|
if ((ifp->if_flags & IFF_PROMISC) != 0) {
|
|
/* Turn on promiscuous mode; turn off the hash filter */
|
|
v |= GEM_MAC_RX_PROMISCUOUS;
|
|
v &= ~GEM_MAC_RX_HASH_FILTER;
|
|
;
|
|
goto chipit;
|
|
}
|
|
if ((ifp->if_flags & IFF_ALLMULTI) != 0) {
|
|
hash[3] = hash[2] = hash[1] = hash[0] = 0xffff;
|
|
ifp->if_flags |= IFF_ALLMULTI;
|
|
goto chipit;
|
|
}
|
|
|
|
/* Turn off promiscuous mode; turn on the hash filter */
|
|
v &= ~GEM_MAC_RX_PROMISCUOUS;
|
|
v |= GEM_MAC_RX_HASH_FILTER;
|
|
|
|
/*
|
|
* Set up multicast address filter by passing all multicast addresses
|
|
* through a crc generator, and then using the high order 6 bits as an
|
|
* index into the 256 bit logical address filter. The high order bit
|
|
* selects the word, while the rest of the bits select the bit within
|
|
* the word.
|
|
*/
|
|
|
|
TAILQ_FOREACH(inm, &sc->sc_arpcom.ac_if.if_multiaddrs, ifma_link) {
|
|
if (inm->ifma_addr->sa_family != AF_LINK)
|
|
continue;
|
|
sdl = (struct sockaddr_dl *)inm->ifma_addr;
|
|
cp = LLADDR(sdl);
|
|
crc = 0xffffffff;
|
|
for (len = sdl->sdl_alen; --len >= 0;) {
|
|
int octet = *cp++;
|
|
int i;
|
|
|
|
#define MC_POLY_LE 0xedb88320UL /* mcast crc, little endian */
|
|
for (i = 0; i < 8; i++) {
|
|
if ((crc & 1) ^ (octet & 1)) {
|
|
crc >>= 1;
|
|
crc ^= MC_POLY_LE;
|
|
} else {
|
|
crc >>= 1;
|
|
}
|
|
octet >>= 1;
|
|
}
|
|
}
|
|
/* Just want the 8 most significant bits. */
|
|
crc >>= 24;
|
|
|
|
/* Set the corresponding bit in the filter. */
|
|
hash[crc >> 4] |= 1 << (crc & 0xf);
|
|
}
|
|
|
|
chipit:
|
|
/* Now load the hash table into the chip */
|
|
bus_space_write_4(t, h, GEM_MAC_HASH0, hash[0]);
|
|
bus_space_write_4(t, h, GEM_MAC_HASH1, hash[1]);
|
|
bus_space_write_4(t, h, GEM_MAC_HASH2, hash[2]);
|
|
bus_space_write_4(t, h, GEM_MAC_HASH3, hash[3]);
|
|
bus_space_write_4(t, h, GEM_MAC_HASH4, hash[4]);
|
|
bus_space_write_4(t, h, GEM_MAC_HASH5, hash[5]);
|
|
bus_space_write_4(t, h, GEM_MAC_HASH6, hash[6]);
|
|
bus_space_write_4(t, h, GEM_MAC_HASH7, hash[7]);
|
|
bus_space_write_4(t, h, GEM_MAC_HASH8, hash[8]);
|
|
bus_space_write_4(t, h, GEM_MAC_HASH9, hash[9]);
|
|
bus_space_write_4(t, h, GEM_MAC_HASH10, hash[10]);
|
|
bus_space_write_4(t, h, GEM_MAC_HASH11, hash[11]);
|
|
bus_space_write_4(t, h, GEM_MAC_HASH12, hash[12]);
|
|
bus_space_write_4(t, h, GEM_MAC_HASH13, hash[13]);
|
|
bus_space_write_4(t, h, GEM_MAC_HASH14, hash[14]);
|
|
bus_space_write_4(t, h, GEM_MAC_HASH15, hash[15]);
|
|
|
|
bus_space_write_4(t, h, GEM_MAC_RX_CONFIG, v);
|
|
}
|
|
|
|
#if notyet
|
|
|
|
/*
|
|
* gem_power:
|
|
*
|
|
* Power management (suspend/resume) hook.
|
|
*/
|
|
void
|
|
static gem_power(why, arg)
|
|
int why;
|
|
void *arg;
|
|
{
|
|
struct gem_softc *sc = arg;
|
|
struct ifnet *ifp = &sc->sc_arpcom.ac_if;
|
|
int s;
|
|
|
|
s = splnet();
|
|
switch (why) {
|
|
case PWR_SUSPEND:
|
|
case PWR_STANDBY:
|
|
gem_stop(ifp, 1);
|
|
if (sc->sc_power != NULL)
|
|
(*sc->sc_power)(sc, why);
|
|
break;
|
|
case PWR_RESUME:
|
|
if (ifp->if_flags & IFF_UP) {
|
|
if (sc->sc_power != NULL)
|
|
(*sc->sc_power)(sc, why);
|
|
gem_init(ifp);
|
|
}
|
|
break;
|
|
case PWR_SOFTSUSPEND:
|
|
case PWR_SOFTSTANDBY:
|
|
case PWR_SOFTRESUME:
|
|
break;
|
|
}
|
|
splx(s);
|
|
}
|
|
#endif
|