d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
e5587cbbc2
freebsd-dev/sys/cam/scsi/scsi_pass.c
Warner Losh ab485b018a Checks here against useracc are not useful and are racy. 
copyin/copyout are sufficient to guard against bad addresses. They will return
EFAULT if the user is up to no good (by choice or ignorance). There's no point
in checking, since it doesn't even improve the error messages.

Noticed by: jhb
Reviewed by: brooks, jhb
2020-04-13 21:04:33 +00:00

2256 lines
58 KiB
C
Raw Blame History

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 1997, 1998, 2000 Justin T. Gibbs.
* Copyright (c) 1997, 1998, 1999 Kenneth D. Merry.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/conf.h>
#include <sys/types.h>
#include <sys/bio.h>
#include <sys/bus.h>
#include <sys/devicestat.h>
#include <sys/errno.h>
#include <sys/fcntl.h>
#include <sys/malloc.h>
#include <sys/proc.h>
#include <sys/poll.h>
#include <sys/selinfo.h>
#include <sys/sdt.h>
#include <sys/sysent.h>
#include <sys/taskqueue.h>
#include <vm/uma.h>
#include <vm/vm.h>
#include <vm/vm_extern.h>
#include <machine/bus.h>
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/cam_periph.h>
#include <cam/cam_queue.h>
#include <cam/cam_xpt.h>
#include <cam/cam_xpt_periph.h>
#include <cam/cam_debug.h>
#include <cam/cam_compat.h>
#include <cam/cam_xpt_periph.h>
#include <cam/scsi/scsi_all.h>
#include <cam/scsi/scsi_pass.h>
typedef enum {
PASS_FLAG_OPEN = 0x01,
PASS_FLAG_LOCKED = 0x02,
PASS_FLAG_INVALID = 0x04,
PASS_FLAG_INITIAL_PHYSPATH = 0x08,
PASS_FLAG_ZONE_INPROG = 0x10,
PASS_FLAG_ZONE_VALID = 0x20,
PASS_FLAG_UNMAPPED_CAPABLE = 0x40,
PASS_FLAG_ABANDONED_REF_SET = 0x80
} pass_flags;
typedef enum {
PASS_STATE_NORMAL
} pass_state;
typedef enum {
PASS_CCB_BUFFER_IO,
PASS_CCB_QUEUED_IO
} pass_ccb_types;
#define ccb_type ppriv_field0
#define ccb_ioreq ppriv_ptr1
/*
* The maximum number of memory segments we preallocate.
*/
#define PASS_MAX_SEGS 16
typedef enum {
PASS_IO_NONE = 0x00,
PASS_IO_USER_SEG_MALLOC = 0x01,
PASS_IO_KERN_SEG_MALLOC = 0x02,
PASS_IO_ABANDONED = 0x04
} pass_io_flags;
struct pass_io_req {
union ccb ccb;
union ccb *alloced_ccb;
union ccb *user_ccb_ptr;
camq_entry user_periph_links;
ccb_ppriv_area user_periph_priv;
struct cam_periph_map_info mapinfo;
pass_io_flags flags;
ccb_flags data_flags;
int num_user_segs;
bus_dma_segment_t user_segs[PASS_MAX_SEGS];
int num_kern_segs;
bus_dma_segment_t kern_segs[PASS_MAX_SEGS];
bus_dma_segment_t *user_segptr;
bus_dma_segment_t *kern_segptr;
int num_bufs;
uint32_t dirs[CAM_PERIPH_MAXMAPS];
uint32_t lengths[CAM_PERIPH_MAXMAPS];
uint8_t *user_bufs[CAM_PERIPH_MAXMAPS];
uint8_t *kern_bufs[CAM_PERIPH_MAXMAPS];
struct bintime start_time;
TAILQ_ENTRY(pass_io_req) links;
};
struct pass_softc {
pass_state state;
pass_flags flags;
u_int8_t pd_type;
union ccb saved_ccb;
int open_count;
u_int maxio;
struct devstat *device_stats;
struct cdev *dev;
struct cdev *alias_dev;
struct task add_physpath_task;
struct task shutdown_kqueue_task;
struct selinfo read_select;
TAILQ_HEAD(, pass_io_req) incoming_queue;
TAILQ_HEAD(, pass_io_req) active_queue;
TAILQ_HEAD(, pass_io_req) abandoned_queue;
TAILQ_HEAD(, pass_io_req) done_queue;
struct cam_periph *periph;
char zone_name[12];
char io_zone_name[12];
uma_zone_t pass_zone;
uma_zone_t pass_io_zone;
size_t io_zone_size;
};
static d_open_t passopen;
static d_close_t passclose;
static d_ioctl_t passioctl;
static d_ioctl_t passdoioctl;
static d_poll_t passpoll;
static d_kqfilter_t passkqfilter;
static void passreadfiltdetach(struct knote *kn);
static int passreadfilt(struct knote *kn, long hint);
static periph_init_t passinit;
static periph_ctor_t passregister;
static periph_oninv_t passoninvalidate;
static periph_dtor_t passcleanup;
static periph_start_t passstart;
static void pass_shutdown_kqueue(void *context, int pending);
static void pass_add_physpath(void *context, int pending);
static void passasync(void *callback_arg, u_int32_t code,
struct cam_path *path, void *arg);
static void passdone(struct cam_periph *periph,
union ccb *done_ccb);
static int passcreatezone(struct cam_periph *periph);
static void passiocleanup(struct pass_softc *softc,
struct pass_io_req *io_req);
static int passcopysglist(struct cam_periph *periph,
struct pass_io_req *io_req,
ccb_flags direction);
static int passmemsetup(struct cam_periph *periph,
struct pass_io_req *io_req);
static int passmemdone(struct cam_periph *periph,
struct pass_io_req *io_req);
static int passerror(union ccb *ccb, u_int32_t cam_flags,
u_int32_t sense_flags);
static int passsendccb(struct cam_periph *periph, union ccb *ccb,
union ccb *inccb);
static struct periph_driver passdriver =
{
passinit, "pass",
TAILQ_HEAD_INITIALIZER(passdriver.units), /* generation */ 0
};
PERIPHDRIVER_DECLARE(pass, passdriver);
static struct cdevsw pass_cdevsw = {
.d_version = D_VERSION,
.d_flags = D_TRACKCLOSE,
.d_open = passopen,
.d_close = passclose,
.d_ioctl = passioctl,
.d_poll = passpoll,
.d_kqfilter = passkqfilter,
.d_name = "pass",
};
static struct filterops passread_filtops = {
.f_isfd = 1,
.f_detach = passreadfiltdetach,
.f_event = passreadfilt
};
static MALLOC_DEFINE(M_SCSIPASS, "scsi_pass", "scsi passthrough buffers");
static void
passinit(void)
{
cam_status status;
/*
* Install a global async callback. This callback will
* receive async callbacks like "new device found".
*/
status = xpt_register_async(AC_FOUND_DEVICE, passasync, NULL, NULL);
if (status != CAM_REQ_CMP) {
printf("pass: Failed to attach master async callback "
"due to status 0x%x!\n", status);
}
}
static void
passrejectios(struct cam_periph *periph)
{
struct pass_io_req *io_req, *io_req2;
struct pass_softc *softc;
softc = (struct pass_softc *)periph->softc;
/*
* The user can no longer get status for I/O on the done queue, so
* clean up all outstanding I/O on the done queue.
*/
TAILQ_FOREACH_SAFE(io_req, &softc->done_queue, links, io_req2) {
TAILQ_REMOVE(&softc->done_queue, io_req, links);
passiocleanup(softc, io_req);
uma_zfree(softc->pass_zone, io_req);
}
/*
* The underlying device is gone, so we can't issue these I/Os.
* The devfs node has been shut down, so we can't return status to
* the user. Free any I/O left on the incoming queue.
*/
TAILQ_FOREACH_SAFE(io_req, &softc->incoming_queue, links, io_req2) {
TAILQ_REMOVE(&softc->incoming_queue, io_req, links);
passiocleanup(softc, io_req);
uma_zfree(softc->pass_zone, io_req);
}
/*
* Normally we would put I/Os on the abandoned queue and acquire a
* reference when we saw the final close. But, the device went
* away and devfs may have moved everything off to deadfs by the
* time the I/O done callback is called; as a result, we won't see
* any more closes. So, if we have any active I/Os, we need to put
* them on the abandoned queue. When the abandoned queue is empty,
* we'll release the remaining reference (see below) to the peripheral.
*/
TAILQ_FOREACH_SAFE(io_req, &softc->active_queue, links, io_req2) {
TAILQ_REMOVE(&softc->active_queue, io_req, links);
io_req->flags |= PASS_IO_ABANDONED;
TAILQ_INSERT_TAIL(&softc->abandoned_queue, io_req, links);
}
/*
* If we put any I/O on the abandoned queue, acquire a reference.
*/
if ((!TAILQ_EMPTY(&softc->abandoned_queue))
&& ((softc->flags & PASS_FLAG_ABANDONED_REF_SET) == 0)) {
cam_periph_doacquire(periph);
softc->flags |= PASS_FLAG_ABANDONED_REF_SET;
}
}
static void
passdevgonecb(void *arg)
{
struct cam_periph *periph;
struct mtx *mtx;
struct pass_softc *softc;
int i;
periph = (struct cam_periph *)arg;
mtx = cam_periph_mtx(periph);
mtx_lock(mtx);
softc = (struct pass_softc *)periph->softc;
KASSERT(softc->open_count >= 0, ("Negative open count %d",
softc->open_count));
/*
* When we get this callback, we will get no more close calls from
* devfs. So if we have any dangling opens, we need to release the
* reference held for that particular context.
*/
for (i = 0; i < softc->open_count; i++)
cam_periph_release_locked(periph);
softc->open_count = 0;
/*
* Release the reference held for the device node, it is gone now.
* Accordingly, inform all queued I/Os of their fate.
*/
cam_periph_release_locked(periph);
passrejectios(periph);
/*
* We reference the SIM lock directly here, instead of using
* cam_periph_unlock(). The reason is that the final call to
* cam_periph_release_locked() above could result in the periph
* getting freed. If that is the case, dereferencing the periph
* with a cam_periph_unlock() call would cause a page fault.
*/
mtx_unlock(mtx);
/*
* We have to remove our kqueue context from a thread because it
* may sleep. It would be nice if we could get a callback from
* kqueue when it is done cleaning up resources.
*/
taskqueue_enqueue(taskqueue_thread, &softc->shutdown_kqueue_task);
}
static void
passoninvalidate(struct cam_periph *periph)
{
struct pass_softc *softc;
softc = (struct pass_softc *)periph->softc;
/*
* De-register any async callbacks.
*/
xpt_register_async(0, passasync, periph, periph->path);
softc->flags |= PASS_FLAG_INVALID;
/*
* Tell devfs this device has gone away, and ask for a callback
* when it has cleaned up its state.
*/
destroy_dev_sched_cb(softc->dev, passdevgonecb, periph);
}
static void
passcleanup(struct cam_periph *periph)
{
struct pass_softc *softc;
softc = (struct pass_softc *)periph->softc;
cam_periph_assert(periph, MA_OWNED);
KASSERT(TAILQ_EMPTY(&softc->active_queue),
("%s called when there are commands on the active queue!\n",
__func__));
KASSERT(TAILQ_EMPTY(&softc->abandoned_queue),
("%s called when there are commands on the abandoned queue!\n",
__func__));
KASSERT(TAILQ_EMPTY(&softc->incoming_queue),
("%s called when there are commands on the incoming queue!\n",
__func__));
KASSERT(TAILQ_EMPTY(&softc->done_queue),
("%s called when there are commands on the done queue!\n",
__func__));
devstat_remove_entry(softc->device_stats);
cam_periph_unlock(periph);
/*
* We call taskqueue_drain() for the physpath task to make sure it
* is complete. We drop the lock because this can potentially
* sleep. XXX KDM that is bad. Need a way to get a callback when
* a taskqueue is drained.
*
* Note that we don't drain the kqueue shutdown task queue. This
* is because we hold a reference on the periph for kqueue, and
* release that reference from the kqueue shutdown task queue. So
* we cannot come into this routine unless we've released that
* reference. Also, because that could be the last reference, we
* could be called from the cam_periph_release() call in
* pass_shutdown_kqueue(). In that case, the taskqueue_drain()
* would deadlock. It would be preferable if we had a way to
* get a callback when a taskqueue is done.
*/
taskqueue_drain(taskqueue_thread, &softc->add_physpath_task);
cam_periph_lock(periph);
free(softc, M_DEVBUF);
}
static void
pass_shutdown_kqueue(void *context, int pending)
{
struct cam_periph *periph;
struct pass_softc *softc;
periph = context;
softc = periph->softc;
knlist_clear(&softc->read_select.si_note, /*is_locked*/ 0);
knlist_destroy(&softc->read_select.si_note);
/*
* Release the reference we held for kqueue.
*/
cam_periph_release(periph);
}
static void
pass_add_physpath(void *context, int pending)
{
struct cam_periph *periph;
struct pass_softc *softc;
struct mtx *mtx;
char *physpath;
/*
* If we have one, create a devfs alias for our
* physical path.
*/
periph = context;
softc = periph->softc;
physpath = malloc(MAXPATHLEN, M_DEVBUF, M_WAITOK);
mtx = cam_periph_mtx(periph);
mtx_lock(mtx);
if (periph->flags & CAM_PERIPH_INVALID)
goto out;
if (xpt_getattr(physpath, MAXPATHLEN,
"GEOM::physpath", periph->path) == 0
&& strlen(physpath) != 0) {
mtx_unlock(mtx);
make_dev_physpath_alias(MAKEDEV_WAITOK, &softc->alias_dev,
softc->dev, softc->alias_dev, physpath);
mtx_lock(mtx);
}
out:
/*
* Now that we've made our alias, we no longer have to have a
* reference to the device.
*/
if ((softc->flags & PASS_FLAG_INITIAL_PHYSPATH) == 0)
softc->flags |= PASS_FLAG_INITIAL_PHYSPATH;
/*
* We always acquire a reference to the periph before queueing this
* task queue function, so it won't go away before we run.
*/
while (pending-- > 0)
cam_periph_release_locked(periph);
mtx_unlock(mtx);
free(physpath, M_DEVBUF);
}
static void
passasync(void *callback_arg, u_int32_t code,
struct cam_path *path, void *arg)
{
struct cam_periph *periph;
periph = (struct cam_periph *)callback_arg;
switch (code) {
case AC_FOUND_DEVICE:
{
struct ccb_getdev *cgd;
cam_status status;
cgd = (struct ccb_getdev *)arg;
if (cgd == NULL)
break;
/*
* Allocate a peripheral instance for
* this device and start the probe
* process.
*/
status = cam_periph_alloc(passregister, passoninvalidate,
passcleanup, passstart, "pass",
CAM_PERIPH_BIO, path,
passasync, AC_FOUND_DEVICE, cgd);
if (status != CAM_REQ_CMP
&& status != CAM_REQ_INPROG) {
const struct cam_status_entry *entry;
entry = cam_fetch_status_entry(status);
printf("passasync: Unable to attach new device "
"due to status %#x: %s\n", status, entry ?
entry->status_text : "Unknown");
}
break;
}
case AC_ADVINFO_CHANGED:
{
uintptr_t buftype;
buftype = (uintptr_t)arg;
if (buftype == CDAI_TYPE_PHYS_PATH) {
struct pass_softc *softc;
softc = (struct pass_softc *)periph->softc;
/*
* Acquire a reference to the periph before we
* start the taskqueue, so that we don't run into
* a situation where the periph goes away before
* the task queue has a chance to run.
*/
if (cam_periph_acquire(periph) != 0)
break;
taskqueue_enqueue(taskqueue_thread,
&softc->add_physpath_task);
}
break;
}
default:
cam_periph_async(periph, code, path, arg);
break;
}
}
static cam_status
passregister(struct cam_periph *periph, void *arg)
{
struct pass_softc *softc;
struct ccb_getdev *cgd;
struct ccb_pathinq cpi;
struct make_dev_args args;
int error, no_tags;
cgd = (struct ccb_getdev *)arg;
if (cgd == NULL) {
printf("%s: no getdev CCB, can't register device\n", __func__);
return(CAM_REQ_CMP_ERR);
}
softc = (struct pass_softc *)malloc(sizeof(*softc),
M_DEVBUF, M_NOWAIT);
if (softc == NULL) {
printf("%s: Unable to probe new device. "
"Unable to allocate softc\n", __func__);
return(CAM_REQ_CMP_ERR);
}
bzero(softc, sizeof(*softc));
softc->state = PASS_STATE_NORMAL;
if (cgd->protocol == PROTO_SCSI || cgd->protocol == PROTO_ATAPI)
softc->pd_type = SID_TYPE(&cgd->inq_data);
else if (cgd->protocol == PROTO_SATAPM)
softc->pd_type = T_ENCLOSURE;
else
softc->pd_type = T_DIRECT;
periph->softc = softc;
softc->periph = periph;
TAILQ_INIT(&softc->incoming_queue);
TAILQ_INIT(&softc->active_queue);
TAILQ_INIT(&softc->abandoned_queue);
TAILQ_INIT(&softc->done_queue);
snprintf(softc->zone_name, sizeof(softc->zone_name), "%s%d",
periph->periph_name, periph->unit_number);
snprintf(softc->io_zone_name, sizeof(softc->io_zone_name), "%s%dIO",
periph->periph_name, periph->unit_number);
softc->io_zone_size = MAXPHYS;
knlist_init_mtx(&softc->read_select.si_note, cam_periph_mtx(periph));
xpt_path_inq(&cpi, periph->path);
if (cpi.maxio == 0)
softc->maxio = DFLTPHYS; /* traditional default */
else if (cpi.maxio > MAXPHYS)
softc->maxio = MAXPHYS; /* for safety */
else
softc->maxio = cpi.maxio; /* real value */
if (cpi.hba_misc & PIM_UNMAPPED)
softc->flags |= PASS_FLAG_UNMAPPED_CAPABLE;
/*
* We pass in 0 for a blocksize, since we don't
* know what the blocksize of this device is, if
* it even has a blocksize.
*/
cam_periph_unlock(periph);
no_tags = (cgd->inq_data.flags & SID_CmdQue) == 0;
softc->device_stats = devstat_new_entry("pass",
periph->unit_number, 0,
DEVSTAT_NO_BLOCKSIZE
| (no_tags ? DEVSTAT_NO_ORDERED_TAGS : 0),
softc->pd_type |
XPORT_DEVSTAT_TYPE(cpi.transport) |
DEVSTAT_TYPE_PASS,
DEVSTAT_PRIORITY_PASS);
/*
* Initialize the taskqueue handler for shutting down kqueue.
*/
TASK_INIT(&softc->shutdown_kqueue_task, /*priority*/ 0,
pass_shutdown_kqueue, periph);
/*
* Acquire a reference to the periph that we can release once we've
* cleaned up the kqueue.
*/
if (cam_periph_acquire(periph) != 0) {
xpt_print(periph->path, "%s: lost periph during "
"registration!\n", __func__);
cam_periph_lock(periph);
return (CAM_REQ_CMP_ERR);
}
/*
* Acquire a reference to the periph before we create the devfs
* instance for it. We'll release this reference once the devfs
* instance has been freed.
*/
if (cam_periph_acquire(periph) != 0) {
xpt_print(periph->path, "%s: lost periph during "
"registration!\n", __func__);
cam_periph_lock(periph);
return (CAM_REQ_CMP_ERR);
}
/* Register the device */
make_dev_args_init(&args);
args.mda_devsw = &pass_cdevsw;
args.mda_unit = periph->unit_number;
args.mda_uid = UID_ROOT;
args.mda_gid = GID_OPERATOR;
args.mda_mode = 0600;
args.mda_si_drv1 = periph;
error = make_dev_s(&args, &softc->dev, "%s%d", periph->periph_name,
periph->unit_number);
if (error != 0) {
cam_periph_lock(periph);
cam_periph_release_locked(periph);
return (CAM_REQ_CMP_ERR);
}
/*
* Hold a reference to the periph before we create the physical
* path alias so it can't go away.
*/
if (cam_periph_acquire(periph) != 0) {
xpt_print(periph->path, "%s: lost periph during "
"registration!\n", __func__);
cam_periph_lock(periph);
return (CAM_REQ_CMP_ERR);
}
cam_periph_lock(periph);
TASK_INIT(&softc->add_physpath_task, /*priority*/0,
pass_add_physpath, periph);
/*
* See if physical path information is already available.
*/
taskqueue_enqueue(taskqueue_thread, &softc->add_physpath_task);
/*
* Add an async callback so that we get notified if
* this device goes away or its physical path
* (stored in the advanced info data of the EDT) has
* changed.
*/
xpt_register_async(AC_LOST_DEVICE | AC_ADVINFO_CHANGED,
passasync, periph, periph->path);
if (bootverbose)
xpt_announce_periph(periph, NULL);
return(CAM_REQ_CMP);
}
static int
passopen(struct cdev *dev, int flags, int fmt, struct thread *td)
{
struct cam_periph *periph;
struct pass_softc *softc;
int error;
periph = (struct cam_periph *)dev->si_drv1;
if (cam_periph_acquire(periph) != 0)
return (ENXIO);
cam_periph_lock(periph);
softc = (struct pass_softc *)periph->softc;
if (softc->flags & PASS_FLAG_INVALID) {
cam_periph_release_locked(periph);
cam_periph_unlock(periph);
return(ENXIO);
}
/*
* Don't allow access when we're running at a high securelevel.
*/
error = securelevel_gt(td->td_ucred, 1);
if (error) {
cam_periph_release_locked(periph);
cam_periph_unlock(periph);
return(error);
}
/*
* Only allow read-write access.
*/
if (((flags & FWRITE) == 0) || ((flags & FREAD) == 0)) {
cam_periph_release_locked(periph);
cam_periph_unlock(periph);
return(EPERM);
}
/*
* We don't allow nonblocking access.
*/
if ((flags & O_NONBLOCK) != 0) {
xpt_print(periph->path, "can't do nonblocking access\n");
cam_periph_release_locked(periph);
cam_periph_unlock(periph);
return(EINVAL);
}
softc->open_count++;
cam_periph_unlock(periph);
return (error);
}
static int
passclose(struct cdev *dev, int flag, int fmt, struct thread *td)
{
struct cam_periph *periph;
struct pass_softc *softc;
struct mtx *mtx;
periph = (struct cam_periph *)dev->si_drv1;
mtx = cam_periph_mtx(periph);
mtx_lock(mtx);
softc = periph->softc;
softc->open_count--;
if (softc->open_count == 0) {
struct pass_io_req *io_req, *io_req2;
TAILQ_FOREACH_SAFE(io_req, &softc->done_queue, links, io_req2) {
TAILQ_REMOVE(&softc->done_queue, io_req, links);
passiocleanup(softc, io_req);
uma_zfree(softc->pass_zone, io_req);
}
TAILQ_FOREACH_SAFE(io_req, &softc->incoming_queue, links,
io_req2) {
TAILQ_REMOVE(&softc->incoming_queue, io_req, links);
passiocleanup(softc, io_req);
uma_zfree(softc->pass_zone, io_req);
}
/*
* If there are any active I/Os, we need to forcibly acquire a
* reference to the peripheral so that we don't go away
* before they complete. We'll release the reference when
* the abandoned queue is empty.
*/
io_req = TAILQ_FIRST(&softc->active_queue);
if ((io_req != NULL)
&& (softc->flags & PASS_FLAG_ABANDONED_REF_SET) == 0) {
cam_periph_doacquire(periph);
softc->flags |= PASS_FLAG_ABANDONED_REF_SET;
}
/*
* Since the I/O in the active queue is not under our
* control, just set a flag so that we can clean it up when
* it completes and put it on the abandoned queue. This
* will prevent our sending spurious completions in the
* event that the device is opened again before these I/Os
* complete.
*/
TAILQ_FOREACH_SAFE(io_req, &softc->active_queue, links,
io_req2) {
TAILQ_REMOVE(&softc->active_queue, io_req, links);
io_req->flags |= PASS_IO_ABANDONED;
TAILQ_INSERT_TAIL(&softc->abandoned_queue, io_req,
links);
}
}
cam_periph_release_locked(periph);
/*
* We reference the lock directly here, instead of using
* cam_periph_unlock(). The reason is that the call to
* cam_periph_release_locked() above could result in the periph
* getting freed. If that is the case, dereferencing the periph
* with a cam_periph_unlock() call would cause a page fault.
*
* cam_periph_release() avoids this problem using the same method,
* but we're manually acquiring and dropping the lock here to
* protect the open count and avoid another lock acquisition and
* release.
*/
mtx_unlock(mtx);
return (0);
}
static void
passstart(struct cam_periph *periph, union ccb *start_ccb)
{
struct pass_softc *softc;
softc = (struct pass_softc *)periph->softc;
switch (softc->state) {
case PASS_STATE_NORMAL: {
struct pass_io_req *io_req;
/*
* Check for any queued I/O requests that require an
* allocated slot.
*/
io_req = TAILQ_FIRST(&softc->incoming_queue);
if (io_req == NULL) {
xpt_release_ccb(start_ccb);
break;
}
TAILQ_REMOVE(&softc->incoming_queue, io_req, links);
TAILQ_INSERT_TAIL(&softc->active_queue, io_req, links);
/*
* Merge the user's CCB into the allocated CCB.
*/
xpt_merge_ccb(start_ccb, &io_req->ccb);
start_ccb->ccb_h.ccb_type = PASS_CCB_QUEUED_IO;
start_ccb->ccb_h.ccb_ioreq = io_req;
start_ccb->ccb_h.cbfcnp = passdone;
io_req->alloced_ccb = start_ccb;
binuptime(&io_req->start_time);
devstat_start_transaction(softc->device_stats,
&io_req->start_time);
xpt_action(start_ccb);
/*
* If we have any more I/O waiting, schedule ourselves again.
*/
if (!TAILQ_EMPTY(&softc->incoming_queue))
xpt_schedule(periph, CAM_PRIORITY_NORMAL);
break;
}
default:
break;
}
}
static void
passdone(struct cam_periph *periph, union ccb *done_ccb)
{
struct pass_softc *softc;
struct ccb_scsiio *csio;
softc = (struct pass_softc *)periph->softc;
cam_periph_assert(periph, MA_OWNED);
csio = &done_ccb->csio;
switch (csio->ccb_h.ccb_type) {
case PASS_CCB_QUEUED_IO: {
struct pass_io_req *io_req;
io_req = done_ccb->ccb_h.ccb_ioreq;
#if 0
xpt_print(periph->path, "%s: called for user CCB %p\n",
__func__, io_req->user_ccb_ptr);
#endif
if (((done_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP)
&& (done_ccb->ccb_h.flags & CAM_PASS_ERR_RECOVER)
&& ((io_req->flags & PASS_IO_ABANDONED) == 0)) {
int error;
error = passerror(done_ccb, CAM_RETRY_SELTO,
SF_RETRY_UA | SF_NO_PRINT);
if (error == ERESTART) {
/*
* A retry was scheduled, so
* just return.
*/
return;
}
}
/*
* Copy the allocated CCB contents back to the malloced CCB
* so we can give status back to the user when he requests it.
*/
bcopy(done_ccb, &io_req->ccb, sizeof(*done_ccb));
/*
* Log data/transaction completion with devstat(9).
*/
switch (done_ccb->ccb_h.func_code) {
case XPT_SCSI_IO:
devstat_end_transaction(softc->device_stats,
done_ccb->csio.dxfer_len - done_ccb->csio.resid,
done_ccb->csio.tag_action & 0x3,
((done_ccb->ccb_h.flags & CAM_DIR_MASK) ==
CAM_DIR_NONE) ? DEVSTAT_NO_DATA :
(done_ccb->ccb_h.flags & CAM_DIR_OUT) ?
DEVSTAT_WRITE : DEVSTAT_READ, NULL,
&io_req->start_time);
break;
case XPT_ATA_IO:
devstat_end_transaction(softc->device_stats,
done_ccb->ataio.dxfer_len - done_ccb->ataio.resid,
0, /* Not used in ATA */
((done_ccb->ccb_h.flags & CAM_DIR_MASK) ==
CAM_DIR_NONE) ? DEVSTAT_NO_DATA :
(done_ccb->ccb_h.flags & CAM_DIR_OUT) ?
DEVSTAT_WRITE : DEVSTAT_READ, NULL,
&io_req->start_time);
break;
case XPT_SMP_IO:
/*
* XXX KDM this isn't quite right, but there isn't
* currently an easy way to represent a bidirectional
* transfer in devstat. The only way to do it
* and have the byte counts come out right would
* mean that we would have to record two
* transactions, one for the request and one for the
* response. For now, so that we report something,
* just treat the entire thing as a read.
*/
devstat_end_transaction(softc->device_stats,
done_ccb->smpio.smp_request_len +
done_ccb->smpio.smp_response_len,
DEVSTAT_TAG_SIMPLE, DEVSTAT_READ, NULL,
&io_req->start_time);
break;
default:
devstat_end_transaction(softc->device_stats, 0,
DEVSTAT_TAG_NONE, DEVSTAT_NO_DATA, NULL,
&io_req->start_time);
break;
}
/*
* In the normal case, take the completed I/O off of the
* active queue and put it on the done queue. Notitfy the
* user that we have a completed I/O.
*/
if ((io_req->flags & PASS_IO_ABANDONED) == 0) {
TAILQ_REMOVE(&softc->active_queue, io_req, links);
TAILQ_INSERT_TAIL(&softc->done_queue, io_req, links);
selwakeuppri(&softc->read_select, PRIBIO);
KNOTE_LOCKED(&softc->read_select.si_note, 0);
} else {
/*
* In the case of an abandoned I/O (final close
* without fetching the I/O), take it off of the
* abandoned queue and free it.
*/
TAILQ_REMOVE(&softc->abandoned_queue, io_req, links);
passiocleanup(softc, io_req);
uma_zfree(softc->pass_zone, io_req);
/*
* Release the done_ccb here, since we may wind up
* freeing the peripheral when we decrement the
* reference count below.
*/
xpt_release_ccb(done_ccb);
/*
* If the abandoned queue is empty, we can release
* our reference to the periph since we won't have
* any more completions coming.
*/
if ((TAILQ_EMPTY(&softc->abandoned_queue))
&& (softc->flags & PASS_FLAG_ABANDONED_REF_SET)) {
softc->flags &= ~PASS_FLAG_ABANDONED_REF_SET;
cam_periph_release_locked(periph);
}
/*
* We have already released the CCB, so we can
* return.
*/
return;
}
break;
}
}
xpt_release_ccb(done_ccb);
}
static int
passcreatezone(struct cam_periph *periph)
{
struct pass_softc *softc;
int error;
error = 0;
softc = (struct pass_softc *)periph->softc;
cam_periph_assert(periph, MA_OWNED);
KASSERT(((softc->flags & PASS_FLAG_ZONE_VALID) == 0),
("%s called when the pass(4) zone is valid!\n", __func__));
KASSERT((softc->pass_zone == NULL),
("%s called when the pass(4) zone is allocated!\n", __func__));
if ((softc->flags & PASS_FLAG_ZONE_INPROG) == 0) {
/*
* We're the first context through, so we need to create
* the pass(4) UMA zone for I/O requests.
*/
softc->flags |= PASS_FLAG_ZONE_INPROG;
/*
* uma_zcreate() does a blocking (M_WAITOK) allocation,
* so we cannot hold a mutex while we call it.
*/
cam_periph_unlock(periph);
softc->pass_zone = uma_zcreate(softc->zone_name,
sizeof(struct pass_io_req), NULL, NULL, NULL, NULL,
/*align*/ 0, /*flags*/ 0);
softc->pass_io_zone = uma_zcreate(softc->io_zone_name,
softc->io_zone_size, NULL, NULL, NULL, NULL,
/*align*/ 0, /*flags*/ 0);
cam_periph_lock(periph);
if ((softc->pass_zone == NULL)
|| (softc->pass_io_zone == NULL)) {
if (softc->pass_zone == NULL)
xpt_print(periph->path, "unable to allocate "
"IO Req UMA zone\n");
else
xpt_print(periph->path, "unable to allocate "
"IO UMA zone\n");
softc->flags &= ~PASS_FLAG_ZONE_INPROG;
goto bailout;
}
/*
* Set the flags appropriately and notify any other waiters.
*/
softc->flags &= PASS_FLAG_ZONE_INPROG;
softc->flags |= PASS_FLAG_ZONE_VALID;
wakeup(&softc->pass_zone);
} else {
/*
* In this case, the UMA zone has not yet been created, but
* another context is in the process of creating it. We
* need to sleep until the creation is either done or has
* failed.
*/
while ((softc->flags & PASS_FLAG_ZONE_INPROG)
&& ((softc->flags & PASS_FLAG_ZONE_VALID) == 0)) {
error = msleep(&softc->pass_zone,
cam_periph_mtx(periph), PRIBIO,
"paszon", 0);
if (error != 0)
goto bailout;
}
/*
* If the zone creation failed, no luck for the user.
*/
if ((softc->flags & PASS_FLAG_ZONE_VALID) == 0){
error = ENOMEM;
goto bailout;
}
}
bailout:
return (error);
}
static void
passiocleanup(struct pass_softc *softc, struct pass_io_req *io_req)
{
union ccb *ccb;
u_int8_t **data_ptrs[CAM_PERIPH_MAXMAPS];
int i, numbufs;
ccb = &io_req->ccb;
switch (ccb->ccb_h.func_code) {
case XPT_DEV_MATCH:
numbufs = min(io_req->num_bufs, 2);
if (numbufs == 1) {
data_ptrs[0] = (u_int8_t **)&ccb->cdm.matches;
} else {
data_ptrs[0] = (u_int8_t **)&ccb->cdm.patterns;
data_ptrs[1] = (u_int8_t **)&ccb->cdm.matches;
}
break;
case XPT_SCSI_IO:
case XPT_CONT_TARGET_IO:
data_ptrs[0] = &ccb->csio.data_ptr;
numbufs = min(io_req->num_bufs, 1);
break;
case XPT_ATA_IO:
data_ptrs[0] = &ccb->ataio.data_ptr;
numbufs = min(io_req->num_bufs, 1);
break;
case XPT_SMP_IO:
numbufs = min(io_req->num_bufs, 2);
data_ptrs[0] = &ccb->smpio.smp_request;
data_ptrs[1] = &ccb->smpio.smp_response;
break;
case XPT_DEV_ADVINFO:
numbufs = min(io_req->num_bufs, 1);
data_ptrs[0] = (uint8_t **)&ccb->cdai.buf;
break;
case XPT_NVME_IO:
case XPT_NVME_ADMIN:
data_ptrs[0] = &ccb->nvmeio.data_ptr;
numbufs = min(io_req->num_bufs, 1);
break;
default:
/* allow ourselves to be swapped once again */
return;
break; /* NOTREACHED */
}
if (io_req->flags & PASS_IO_USER_SEG_MALLOC) {
free(io_req->user_segptr, M_SCSIPASS);
io_req->user_segptr = NULL;
}
/*
* We only want to free memory we malloced.
*/
if (io_req->data_flags == CAM_DATA_VADDR) {
for (i = 0; i < io_req->num_bufs; i++) {
if (io_req->kern_bufs[i] == NULL)
continue;
free(io_req->kern_bufs[i], M_SCSIPASS);
io_req->kern_bufs[i] = NULL;
}
} else if (io_req->data_flags == CAM_DATA_SG) {
for (i = 0; i < io_req->num_kern_segs; i++) {
if ((uint8_t *)(uintptr_t)
io_req->kern_segptr[i].ds_addr == NULL)
continue;
uma_zfree(softc->pass_io_zone, (uint8_t *)(uintptr_t)
io_req->kern_segptr[i].ds_addr);
io_req->kern_segptr[i].ds_addr = 0;
}
}
if (io_req->flags & PASS_IO_KERN_SEG_MALLOC) {
free(io_req->kern_segptr, M_SCSIPASS);
io_req->kern_segptr = NULL;
}
if (io_req->data_flags != CAM_DATA_PADDR) {
for (i = 0; i < numbufs; i++) {
/*
* Restore the user's buffer pointers to their
* previous values.
*/
if (io_req->user_bufs[i] != NULL)
*data_ptrs[i] = io_req->user_bufs[i];
}
}
}
static int
passcopysglist(struct cam_periph *periph, struct pass_io_req *io_req,
ccb_flags direction)
{
bus_size_t kern_watermark, user_watermark, len_copied, len_to_copy;
bus_dma_segment_t *user_sglist, *kern_sglist;
int i, j, error;
error = 0;
kern_watermark = 0;
user_watermark = 0;
len_to_copy = 0;
len_copied = 0;
user_sglist = io_req->user_segptr;
kern_sglist = io_req->kern_segptr;
for (i = 0, j = 0; i < io_req->num_user_segs &&
j < io_req->num_kern_segs;) {
uint8_t *user_ptr, *kern_ptr;
len_to_copy = min(user_sglist[i].ds_len -user_watermark,
kern_sglist[j].ds_len - kern_watermark);
user_ptr = (uint8_t *)(uintptr_t)user_sglist[i].ds_addr;
user_ptr = user_ptr + user_watermark;
kern_ptr = (uint8_t *)(uintptr_t)kern_sglist[j].ds_addr;
kern_ptr = kern_ptr + kern_watermark;
user_watermark += len_to_copy;
kern_watermark += len_to_copy;
if (direction == CAM_DIR_IN) {
error = copyout(kern_ptr, user_ptr, len_to_copy);
if (error != 0) {
xpt_print(periph->path, "%s: copyout of %u "
"bytes from %p to %p failed with "
"error %d\n", __func__, len_to_copy,
kern_ptr, user_ptr, error);
goto bailout;
}
} else {
error = copyin(user_ptr, kern_ptr, len_to_copy);
if (error != 0) {
xpt_print(periph->path, "%s: copyin of %u "
"bytes from %p to %p failed with "
"error %d\n", __func__, len_to_copy,
user_ptr, kern_ptr, error);
goto bailout;
}
}
len_copied += len_to_copy;
if (user_sglist[i].ds_len == user_watermark) {
i++;
user_watermark = 0;
}
if (kern_sglist[j].ds_len == kern_watermark) {
j++;
kern_watermark = 0;
}
}
bailout:
return (error);
}
static int
passmemsetup(struct cam_periph *periph, struct pass_io_req *io_req)
{
union ccb *ccb;
struct pass_softc *softc;
int numbufs, i;
uint8_t **data_ptrs[CAM_PERIPH_MAXMAPS];
uint32_t lengths[CAM_PERIPH_MAXMAPS];
uint32_t dirs[CAM_PERIPH_MAXMAPS];
uint32_t num_segs;
uint16_t *seg_cnt_ptr;
size_t maxmap;
int error;
cam_periph_assert(periph, MA_NOTOWNED);
softc = periph->softc;
error = 0;
ccb = &io_req->ccb;
maxmap = 0;
num_segs = 0;
seg_cnt_ptr = NULL;
switch(ccb->ccb_h.func_code) {
case XPT_DEV_MATCH:
if (ccb->cdm.match_buf_len == 0) {
printf("%s: invalid match buffer length 0\n", __func__);
return(EINVAL);
}
if (ccb->cdm.pattern_buf_len > 0) {
data_ptrs[0] = (u_int8_t **)&ccb->cdm.patterns;
lengths[0] = ccb->cdm.pattern_buf_len;
dirs[0] = CAM_DIR_OUT;
data_ptrs[1] = (u_int8_t **)&ccb->cdm.matches;
lengths[1] = ccb->cdm.match_buf_len;
dirs[1] = CAM_DIR_IN;
numbufs = 2;
} else {
data_ptrs[0] = (u_int8_t **)&ccb->cdm.matches;
lengths[0] = ccb->cdm.match_buf_len;
dirs[0] = CAM_DIR_IN;
numbufs = 1;
}
io_req->data_flags = CAM_DATA_VADDR;
break;
case XPT_SCSI_IO:
case XPT_CONT_TARGET_IO:
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE)
return(0);
/*
* The user shouldn't be able to supply a bio.
*/
if ((ccb->ccb_h.flags & CAM_DATA_MASK) == CAM_DATA_BIO)
return (EINVAL);
io_req->data_flags = ccb->ccb_h.flags & CAM_DATA_MASK;
data_ptrs[0] = &ccb->csio.data_ptr;
lengths[0] = ccb->csio.dxfer_len;
dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK;
num_segs = ccb->csio.sglist_cnt;
seg_cnt_ptr = &ccb->csio.sglist_cnt;
numbufs = 1;
maxmap = softc->maxio;
break;
case XPT_ATA_IO:
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE)
return(0);
/*
* We only support a single virtual address for ATA I/O.
*/
if ((ccb->ccb_h.flags & CAM_DATA_MASK) != CAM_DATA_VADDR)
return (EINVAL);
io_req->data_flags = CAM_DATA_VADDR;
data_ptrs[0] = &ccb->ataio.data_ptr;
lengths[0] = ccb->ataio.dxfer_len;
dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK;
numbufs = 1;
maxmap = softc->maxio;
break;
case XPT_SMP_IO:
io_req->data_flags = CAM_DATA_VADDR;
data_ptrs[0] = &ccb->smpio.smp_request;
lengths[0] = ccb->smpio.smp_request_len;
dirs[0] = CAM_DIR_OUT;
data_ptrs[1] = &ccb->smpio.smp_response;
lengths[1] = ccb->smpio.smp_response_len;
dirs[1] = CAM_DIR_IN;
numbufs = 2;
maxmap = softc->maxio;
break;
case XPT_DEV_ADVINFO:
if (ccb->cdai.bufsiz == 0)
return (0);
io_req->data_flags = CAM_DATA_VADDR;
data_ptrs[0] = (uint8_t **)&ccb->cdai.buf;
lengths[0] = ccb->cdai.bufsiz;
dirs[0] = CAM_DIR_IN;
numbufs = 1;
break;
case XPT_NVME_ADMIN:
case XPT_NVME_IO:
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE)
return (0);
io_req->data_flags = ccb->ccb_h.flags & CAM_DATA_MASK;
data_ptrs[0] = &ccb->nvmeio.data_ptr;
lengths[0] = ccb->nvmeio.dxfer_len;
dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK;
num_segs = ccb->nvmeio.sglist_cnt;
seg_cnt_ptr = &ccb->nvmeio.sglist_cnt;
numbufs = 1;
maxmap = softc->maxio;
break;
default:
return(EINVAL);
break; /* NOTREACHED */
}
io_req->num_bufs = numbufs;
/*
* If there is a maximum, check to make sure that the user's
* request fits within the limit. In general, we should only have
* a maximum length for requests that go to hardware. Otherwise it
* is whatever we're able to malloc.
*/
for (i = 0; i < numbufs; i++) {
io_req->user_bufs[i] = *data_ptrs[i];
io_req->dirs[i] = dirs[i];
io_req->lengths[i] = lengths[i];
if (maxmap == 0)
continue;
if (lengths[i] <= maxmap)
continue;
xpt_print(periph->path, "%s: data length %u > max allowed %u "
"bytes\n", __func__, lengths[i], maxmap);
error = EINVAL;
goto bailout;
}
switch (io_req->data_flags) {
case CAM_DATA_VADDR:
/* Map or copy the buffer into kernel address space */
for (i = 0; i < numbufs; i++) {
uint8_t *tmp_buf;
/*
* If for some reason no length is specified, we
* don't need to allocate anything.
*/
if (io_req->lengths[i] == 0)
continue;
tmp_buf = malloc(lengths[i], M_SCSIPASS,
M_WAITOK | M_ZERO);
io_req->kern_bufs[i] = tmp_buf;
*data_ptrs[i] = tmp_buf;
#if 0
xpt_print(periph->path, "%s: malloced %p len %u, user "
"buffer %p, operation: %s\n", __func__,
tmp_buf, lengths[i], io_req->user_bufs[i],
(dirs[i] == CAM_DIR_IN) ? "read" : "write");
#endif
/*
* We only need to copy in if the user is writing.
*/
if (dirs[i] != CAM_DIR_OUT)
continue;
error = copyin(io_req->user_bufs[i],
io_req->kern_bufs[i], lengths[i]);
if (error != 0) {
xpt_print(periph->path, "%s: copy of user "
"buffer from %p to %p failed with "
"error %d\n", __func__,
io_req->user_bufs[i],
io_req->kern_bufs[i], error);
goto bailout;
}
}
break;
case CAM_DATA_PADDR:
/* Pass down the pointer as-is */
break;
case CAM_DATA_SG: {
size_t sg_length, size_to_go, alloc_size;
uint32_t num_segs_needed;
/*
* Copy the user S/G list in, and then copy in the
* individual segments.
*/
/*
* We shouldn't see this, but check just in case.
*/
if (numbufs != 1) {
xpt_print(periph->path, "%s: cannot currently handle "
"more than one S/G list per CCB\n", __func__);
error = EINVAL;
goto bailout;
}
/*
* We have to have at least one segment.
*/
if (num_segs == 0) {
xpt_print(periph->path, "%s: CAM_DATA_SG flag set, "
"but sglist_cnt=0!\n", __func__);
error = EINVAL;
goto bailout;
}
/*
* Make sure the user specified the total length and didn't
* just leave it to us to decode the S/G list.
*/
if (lengths[0] == 0) {
xpt_print(periph->path, "%s: no dxfer_len specified, "
"but CAM_DATA_SG flag is set!\n", __func__);
error = EINVAL;
goto bailout;
}
/*
* We allocate buffers in io_zone_size increments for an
* S/G list. This will generally be MAXPHYS.
*/
if (lengths[0] <= softc->io_zone_size)
num_segs_needed = 1;
else {
num_segs_needed = lengths[0] / softc->io_zone_size;
if ((lengths[0] % softc->io_zone_size) != 0)
num_segs_needed++;
}
/* Figure out the size of the S/G list */
sg_length = num_segs * sizeof(bus_dma_segment_t);
io_req->num_user_segs = num_segs;
io_req->num_kern_segs = num_segs_needed;
/* Save the user's S/G list pointer for later restoration */
io_req->user_bufs[0] = *data_ptrs[0];
/*
* If we have enough segments allocated by default to handle
* the length of the user's S/G list,
*/
if (num_segs > PASS_MAX_SEGS) {
io_req->user_segptr = malloc(sizeof(bus_dma_segment_t) *
num_segs, M_SCSIPASS, M_WAITOK | M_ZERO);
io_req->flags |= PASS_IO_USER_SEG_MALLOC;
} else
io_req->user_segptr = io_req->user_segs;
error = copyin(*data_ptrs[0], io_req->user_segptr, sg_length);
if (error != 0) {
xpt_print(periph->path, "%s: copy of user S/G list "
"from %p to %p failed with error %d\n",
__func__, *data_ptrs[0], io_req->user_segptr,
error);
goto bailout;
}
if (num_segs_needed > PASS_MAX_SEGS) {
io_req->kern_segptr = malloc(sizeof(bus_dma_segment_t) *
num_segs_needed, M_SCSIPASS, M_WAITOK | M_ZERO);
io_req->flags |= PASS_IO_KERN_SEG_MALLOC;
} else {
io_req->kern_segptr = io_req->kern_segs;
}
/*
* Allocate the kernel S/G list.
*/
for (size_to_go = lengths[0], i = 0;
size_to_go > 0 && i < num_segs_needed;
i++, size_to_go -= alloc_size) {
uint8_t *kern_ptr;
alloc_size = min(size_to_go, softc->io_zone_size);
kern_ptr = uma_zalloc(softc->pass_io_zone, M_WAITOK);
io_req->kern_segptr[i].ds_addr =
(bus_addr_t)(uintptr_t)kern_ptr;
io_req->kern_segptr[i].ds_len = alloc_size;
}
if (size_to_go > 0) {
printf("%s: size_to_go = %zu, software error!\n",
__func__, size_to_go);
error = EINVAL;
goto bailout;
}
*data_ptrs[0] = (uint8_t *)io_req->kern_segptr;
*seg_cnt_ptr = io_req->num_kern_segs;
/*
* We only need to copy data here if the user is writing.
*/
if (dirs[0] == CAM_DIR_OUT)
error = passcopysglist(periph, io_req, dirs[0]);
break;
}
case CAM_DATA_SG_PADDR: {
size_t sg_length;
/*
* We shouldn't see this, but check just in case.
*/
if (numbufs != 1) {
printf("%s: cannot currently handle more than one "
"S/G list per CCB\n", __func__);
error = EINVAL;
goto bailout;
}
/*
* We have to have at least one segment.
*/
if (num_segs == 0) {
xpt_print(periph->path, "%s: CAM_DATA_SG_PADDR flag "
"set, but sglist_cnt=0!\n", __func__);
error = EINVAL;
goto bailout;
}
/*
* Make sure the user specified the total length and didn't
* just leave it to us to decode the S/G list.
*/
if (lengths[0] == 0) {
xpt_print(periph->path, "%s: no dxfer_len specified, "
"but CAM_DATA_SG flag is set!\n", __func__);
error = EINVAL;
goto bailout;
}
/* Figure out the size of the S/G list */
sg_length = num_segs * sizeof(bus_dma_segment_t);
io_req->num_user_segs = num_segs;
io_req->num_kern_segs = io_req->num_user_segs;
/* Save the user's S/G list pointer for later restoration */
io_req->user_bufs[0] = *data_ptrs[0];
if (num_segs > PASS_MAX_SEGS) {
io_req->user_segptr = malloc(sizeof(bus_dma_segment_t) *
num_segs, M_SCSIPASS, M_WAITOK | M_ZERO);
io_req->flags |= PASS_IO_USER_SEG_MALLOC;
} else
io_req->user_segptr = io_req->user_segs;
io_req->kern_segptr = io_req->user_segptr;
error = copyin(*data_ptrs[0], io_req->user_segptr, sg_length);
if (error != 0) {
xpt_print(periph->path, "%s: copy of user S/G list "
"from %p to %p failed with error %d\n",
__func__, *data_ptrs[0], io_req->user_segptr,
error);
goto bailout;
}
break;
}
default:
case CAM_DATA_BIO:
/*
* A user shouldn't be attaching a bio to the CCB. It
* isn't a user-accessible structure.
*/
error = EINVAL;
break;
}
bailout:
if (error != 0)
passiocleanup(softc, io_req);
return (error);
}
static int
passmemdone(struct cam_periph *periph, struct pass_io_req *io_req)
{
struct pass_softc *softc;
int error;
int i;
error = 0;
softc = (struct pass_softc *)periph->softc;
switch (io_req->data_flags) {
case CAM_DATA_VADDR:
/*
* Copy back to the user buffer if this was a read.
*/
for (i = 0; i < io_req->num_bufs; i++) {
if (io_req->dirs[i] != CAM_DIR_IN)
continue;
error = copyout(io_req->kern_bufs[i],
io_req->user_bufs[i], io_req->lengths[i]);
if (error != 0) {
xpt_print(periph->path, "Unable to copy %u "
"bytes from %p to user address %p\n",
io_req->lengths[i],
io_req->kern_bufs[i],
io_req->user_bufs[i]);
goto bailout;
}
}
break;
case CAM_DATA_PADDR:
/* Do nothing. The pointer is a physical address already */
break;
case CAM_DATA_SG:
/*
* Copy back to the user buffer if this was a read.
* Restore the user's S/G list buffer pointer.
*/
if (io_req->dirs[0] == CAM_DIR_IN)
error = passcopysglist(periph, io_req, io_req->dirs[0]);
break;
case CAM_DATA_SG_PADDR:
/*
* Restore the user's S/G list buffer pointer. No need to
* copy.
*/
break;
default:
case CAM_DATA_BIO:
error = EINVAL;
break;
}
bailout:
/*
* Reset the user's pointers to their original values and free
* allocated memory.
*/
passiocleanup(softc, io_req);
return (error);
}
static int
passioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td)
{
int error;
if ((error = passdoioctl(dev, cmd, addr, flag, td)) == ENOTTY) {
error = cam_compat_ioctl(dev, cmd, addr, flag, td, passdoioctl);
}
return (error);
}
static int
passdoioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td)
{
struct cam_periph *periph;
struct pass_softc *softc;
int error;
uint32_t priority;
periph = (struct cam_periph *)dev->si_drv1;
cam_periph_lock(periph);
softc = (struct pass_softc *)periph->softc;
error = 0;
switch (cmd) {
case CAMIOCOMMAND:
{
union ccb *inccb;
union ccb *ccb;
int ccb_malloced;
inccb = (union ccb *)addr;
#if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING)
if (inccb->ccb_h.func_code == XPT_SCSI_IO)
inccb->csio.bio = NULL;
#endif
if (inccb->ccb_h.flags & CAM_UNLOCKED) {
error = EINVAL;
break;
}
/*
* Some CCB types, like scan bus and scan lun can only go
* through the transport layer device.
*/
if (inccb->ccb_h.func_code & XPT_FC_XPT_ONLY) {
xpt_print(periph->path, "CCB function code %#x is "
"restricted to the XPT device\n",
inccb->ccb_h.func_code);
error = ENODEV;
break;
}
/* Compatibility for RL/priority-unaware code. */
priority = inccb->ccb_h.pinfo.priority;
if (priority <= CAM_PRIORITY_OOB)
priority += CAM_PRIORITY_OOB + 1;
/*
* Non-immediate CCBs need a CCB from the per-device pool
* of CCBs, which is scheduled by the transport layer.
* Immediate CCBs and user-supplied CCBs should just be
* malloced.
*/
if ((inccb->ccb_h.func_code & XPT_FC_QUEUED)
&& ((inccb->ccb_h.func_code & XPT_FC_USER_CCB) == 0)) {
ccb = cam_periph_getccb(periph, priority);
ccb_malloced = 0;
} else {
ccb = xpt_alloc_ccb_nowait();
if (ccb != NULL)
xpt_setup_ccb(&ccb->ccb_h, periph->path,
priority);
ccb_malloced = 1;
}
if (ccb == NULL) {
xpt_print(periph->path, "unable to allocate CCB\n");
error = ENOMEM;
break;
}
error = passsendccb(periph, ccb, inccb);
if (ccb_malloced)
xpt_free_ccb(ccb);
else
xpt_release_ccb(ccb);
break;
}
case CAMIOQUEUE:
{
struct pass_io_req *io_req;
union ccb **user_ccb, *ccb;
xpt_opcode fc;
#ifdef COMPAT_FREEBSD32
if (SV_PROC_FLAG(td->td_proc, SV_ILP32)) {
error = ENOTTY;
goto bailout;
}
#endif
if ((softc->flags & PASS_FLAG_ZONE_VALID) == 0) {
error = passcreatezone(periph);
if (error != 0)
goto bailout;
}
/*
* We're going to do a blocking allocation for this I/O
* request, so we have to drop the lock.
*/
cam_periph_unlock(periph);
io_req = uma_zalloc(softc->pass_zone, M_WAITOK | M_ZERO);
ccb = &io_req->ccb;
user_ccb = (union ccb **)addr;
/*
* Unlike the CAMIOCOMMAND ioctl above, we only have a
* pointer to the user's CCB, so we have to copy the whole
* thing in to a buffer we have allocated (above) instead
* of allowing the ioctl code to malloc a buffer and copy
* it in.
*
* This is an advantage for this asynchronous interface,
* since we don't want the memory to get freed while the
* CCB is outstanding.
*/
#if 0
xpt_print(periph->path, "Copying user CCB %p to "
"kernel address %p\n", *user_ccb, ccb);
#endif
error = copyin(*user_ccb, ccb, sizeof(*ccb));
if (error != 0) {
xpt_print(periph->path, "Copy of user CCB %p to "
"kernel address %p failed with error %d\n",
*user_ccb, ccb, error);
goto camioqueue_error;
}
#if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING)
if (ccb->ccb_h.func_code == XPT_SCSI_IO)
ccb->csio.bio = NULL;
#endif
if (ccb->ccb_h.flags & CAM_UNLOCKED) {
error = EINVAL;
goto camioqueue_error;
}
if (ccb->ccb_h.flags & CAM_CDB_POINTER) {
if (ccb->csio.cdb_len > IOCDBLEN) {
error = EINVAL;
goto camioqueue_error;
}
error = copyin(ccb->csio.cdb_io.cdb_ptr,
ccb->csio.cdb_io.cdb_bytes, ccb->csio.cdb_len);
if (error != 0)
goto camioqueue_error;
ccb->ccb_h.flags &= ~CAM_CDB_POINTER;
}
/*
* Some CCB types, like scan bus and scan lun can only go
* through the transport layer device.
*/
if (ccb->ccb_h.func_code & XPT_FC_XPT_ONLY) {
xpt_print(periph->path, "CCB function code %#x is "
"restricted to the XPT device\n",
ccb->ccb_h.func_code);
error = ENODEV;
goto camioqueue_error;
}
/*
* Save the user's CCB pointer as well as his linked list
* pointers and peripheral private area so that we can
* restore these later.
*/
io_req->user_ccb_ptr = *user_ccb;
io_req->user_periph_links = ccb->ccb_h.periph_links;
io_req->user_periph_priv = ccb->ccb_h.periph_priv;
/*
* Now that we've saved the user's values, we can set our
* own peripheral private entry.
*/
ccb->ccb_h.ccb_ioreq = io_req;
/* Compatibility for RL/priority-unaware code. */
priority = ccb->ccb_h.pinfo.priority;
if (priority <= CAM_PRIORITY_OOB)
priority += CAM_PRIORITY_OOB + 1;
/*
* Setup fields in the CCB like the path and the priority.
* The path in particular cannot be done in userland, since
* it is a pointer to a kernel data structure.
*/
xpt_setup_ccb_flags(&ccb->ccb_h, periph->path, priority,
ccb->ccb_h.flags);
/*
* Setup our done routine. There is no way for the user to
* have a valid pointer here.
*/
ccb->ccb_h.cbfcnp = passdone;
fc = ccb->ccb_h.func_code;
/*
* If this function code has memory that can be mapped in
* or out, we need to call passmemsetup().
*/
if ((fc == XPT_SCSI_IO) || (fc == XPT_ATA_IO)
|| (fc == XPT_SMP_IO) || (fc == XPT_DEV_MATCH)
|| (fc == XPT_DEV_ADVINFO)
|| (fc == XPT_NVME_ADMIN) || (fc == XPT_NVME_IO)) {
error = passmemsetup(periph, io_req);
if (error != 0)
goto camioqueue_error;
} else
io_req->mapinfo.num_bufs_used = 0;
cam_periph_lock(periph);
/*
* Everything goes on the incoming queue initially.
*/
TAILQ_INSERT_TAIL(&softc->incoming_queue, io_req, links);
/*
* If the CCB is queued, and is not a user CCB, then
* we need to allocate a slot for it. Call xpt_schedule()
* so that our start routine will get called when a CCB is
* available.
*/
if ((fc & XPT_FC_QUEUED)
&& ((fc & XPT_FC_USER_CCB) == 0)) {
xpt_schedule(periph, priority);
break;
}
/*
* At this point, the CCB in question is either an
* immediate CCB (like XPT_DEV_ADVINFO) or it is a user CCB
* and therefore should be malloced, not allocated via a slot.
* Remove the CCB from the incoming queue and add it to the
* active queue.
*/
TAILQ_REMOVE(&softc->incoming_queue, io_req, links);
TAILQ_INSERT_TAIL(&softc->active_queue, io_req, links);
xpt_action(ccb);
/*
* If this is not a queued CCB (i.e. it is an immediate CCB),
* then it is already done. We need to put it on the done
* queue for the user to fetch.
*/
if ((fc & XPT_FC_QUEUED) == 0) {
TAILQ_REMOVE(&softc->active_queue, io_req, links);
TAILQ_INSERT_TAIL(&softc->done_queue, io_req, links);
}
break;
camioqueue_error:
uma_zfree(softc->pass_zone, io_req);
cam_periph_lock(periph);
break;
}
case CAMIOGET:
{
union ccb **user_ccb;
struct pass_io_req *io_req;
int old_error;
#ifdef COMPAT_FREEBSD32
if (SV_PROC_FLAG(td->td_proc, SV_ILP32)) {
error = ENOTTY;
goto bailout;
}
#endif
user_ccb = (union ccb **)addr;
old_error = 0;
io_req = TAILQ_FIRST(&softc->done_queue);
if (io_req == NULL) {
error = ENOENT;
break;
}
/*
* Remove the I/O from the done queue.
*/
TAILQ_REMOVE(&softc->done_queue, io_req, links);
/*
* We have to drop the lock during the copyout because the
* copyout can result in VM faults that require sleeping.
*/
cam_periph_unlock(periph);
/*
* Do any needed copies (e.g. for reads) and revert the
* pointers in the CCB back to the user's pointers.
*/
error = passmemdone(periph, io_req);
old_error = error;
io_req->ccb.ccb_h.periph_links = io_req->user_periph_links;
io_req->ccb.ccb_h.periph_priv = io_req->user_periph_priv;
#if 0
xpt_print(periph->path, "Copying to user CCB %p from "
"kernel address %p\n", *user_ccb, &io_req->ccb);
#endif
error = copyout(&io_req->ccb, *user_ccb, sizeof(union ccb));
if (error != 0) {
xpt_print(periph->path, "Copy to user CCB %p from "
"kernel address %p failed with error %d\n",
*user_ccb, &io_req->ccb, error);
}
/*
* Prefer the first error we got back, and make sure we
* don't overwrite bad status with good.
*/
if (old_error != 0)
error = old_error;
cam_periph_lock(periph);
/*
* At this point, if there was an error, we could potentially
* re-queue the I/O and try again. But why? The error
* would almost certainly happen again. We might as well
* not leak memory.
*/
uma_zfree(softc->pass_zone, io_req);
break;
}
default:
error = cam_periph_ioctl(periph, cmd, addr, passerror);
break;
}
bailout:
cam_periph_unlock(periph);
return(error);
}
static int
passpoll(struct cdev *dev, int poll_events, struct thread *td)
{
struct cam_periph *periph;
struct pass_softc *softc;
int revents;
periph = (struct cam_periph *)dev->si_drv1;
softc = (struct pass_softc *)periph->softc;
revents = poll_events & (POLLOUT | POLLWRNORM);
if ((poll_events & (POLLIN | POLLRDNORM)) != 0) {
cam_periph_lock(periph);
if (!TAILQ_EMPTY(&softc->done_queue)) {
revents |= poll_events & (POLLIN | POLLRDNORM);
}
cam_periph_unlock(periph);
if (revents == 0)
selrecord(td, &softc->read_select);
}
return (revents);
}
static int
passkqfilter(struct cdev *dev, struct knote *kn)
{
struct cam_periph *periph;
struct pass_softc *softc;
periph = (struct cam_periph *)dev->si_drv1;
softc = (struct pass_softc *)periph->softc;
kn->kn_hook = (caddr_t)periph;
kn->kn_fop = &passread_filtops;
knlist_add(&softc->read_select.si_note, kn, 0);
return (0);
}
static void
passreadfiltdetach(struct knote *kn)
{
struct cam_periph *periph;
struct pass_softc *softc;
periph = (struct cam_periph *)kn->kn_hook;
softc = (struct pass_softc *)periph->softc;
knlist_remove(&softc->read_select.si_note, kn, 0);
}
static int
passreadfilt(struct knote *kn, long hint)
{
struct cam_periph *periph;
struct pass_softc *softc;
int retval;
periph = (struct cam_periph *)kn->kn_hook;
softc = (struct pass_softc *)periph->softc;
cam_periph_assert(periph, MA_OWNED);
if (TAILQ_EMPTY(&softc->done_queue))
retval = 0;
else
retval = 1;
return (retval);
}
/*
* Generally, "ccb" should be the CCB supplied by the kernel. "inccb"
* should be the CCB that is copied in from the user.
*/
static int
passsendccb(struct cam_periph *periph, union ccb *ccb, union ccb *inccb)
{
struct pass_softc *softc;
struct cam_periph_map_info mapinfo;
uint8_t *cmd;
xpt_opcode fc;
int error;
softc = (struct pass_softc *)periph->softc;
/*
* There are some fields in the CCB header that need to be
* preserved, the rest we get from the user.
*/
xpt_merge_ccb(ccb, inccb);
if (ccb->ccb_h.flags & CAM_CDB_POINTER) {
cmd = __builtin_alloca(ccb->csio.cdb_len);
error = copyin(ccb->csio.cdb_io.cdb_ptr, cmd, ccb->csio.cdb_len);
if (error)
return (error);
ccb->csio.cdb_io.cdb_ptr = cmd;
}
/*
* Let cam_periph_mapmem do a sanity check on the data pointer format.
* Even if no data transfer is needed, it's a cheap check and it
* simplifies the code.
*/
fc = ccb->ccb_h.func_code;
if ((fc == XPT_SCSI_IO) || (fc == XPT_ATA_IO) || (fc == XPT_SMP_IO)
|| (fc == XPT_DEV_MATCH) || (fc == XPT_DEV_ADVINFO) || (fc == XPT_MMC_IO)
|| (fc == XPT_NVME_ADMIN) || (fc == XPT_NVME_IO)) {
bzero(&mapinfo, sizeof(mapinfo));
/*
* cam_periph_mapmem calls into proc and vm functions that can
* sleep as well as trigger I/O, so we can't hold the lock.
* Dropping it here is reasonably safe.
*/
cam_periph_unlock(periph);
error = cam_periph_mapmem(ccb, &mapinfo, softc->maxio);
cam_periph_lock(periph);
/*
* cam_periph_mapmem returned an error, we can't continue.
* Return the error to the user.
*/
if (error)
return(error);
} else
/* Ensure that the unmap call later on is a no-op. */
mapinfo.num_bufs_used = 0;
/*
* If the user wants us to perform any error recovery, then honor
* that request. Otherwise, it's up to the user to perform any
* error recovery.
*/
cam_periph_runccb(ccb, (ccb->ccb_h.flags & CAM_PASS_ERR_RECOVER) ?
passerror : NULL, /* cam_flags */ CAM_RETRY_SELTO,
/* sense_flags */ SF_RETRY_UA | SF_NO_PRINT,
softc->device_stats);
cam_periph_unlock(periph);
cam_periph_unmapmem(ccb, &mapinfo);
cam_periph_lock(periph);
ccb->ccb_h.cbfcnp = NULL;
ccb->ccb_h.periph_priv = inccb->ccb_h.periph_priv;
bcopy(ccb, inccb, sizeof(union ccb));
return(0);
}
static int
passerror(union ccb *ccb, u_int32_t cam_flags, u_int32_t sense_flags)
{
struct cam_periph *periph;
struct pass_softc *softc;
periph = xpt_path_periph(ccb->ccb_h.path);
softc = (struct pass_softc *)periph->softc;
return(cam_periph_error(ccb, cam_flags, sense_flags));
}
Reference in New Issue View Git Blame Copy Permalink