Adrian Chadd e5d63a99bc Add a new HAL capability - check and enforce whether the NIC supports ... enforcing the TXOP and TBTT limits: * Frames which will overlap with TBTT will not TX; * Frames which will exceed TXOP will be filtered. This is not enabled by default; it's intended to be enabled by the TDMA code on 802.11n capable chipsets.		2012-12-01 03:48:11 +00:00
..
ath_dfs/null	Disable strong signal diversity when enabling radar pulse detection	2012-09-02 05:01:10 +00:00
ath_hal	Add a new HAL capability - check and enforce whether the NIC supports	2012-12-01 03:48:11 +00:00
ath_rate	I've had some feedback that CCK rates are more reliable than MCS 0	2012-10-31 06:35:50 +00:00
ah_osdep.c	Fix the HAL debugging to only use one bit to mark a message as unmaskable.	2012-07-01 02:34:32 +00:00
ah_osdep.h	Migrate the ath_hal_filltxdesc() API to take a list of buffer/seglen values.	2012-08-05 10:12:27 +00:00
if_ath_ahb.c	I give up - introduce a TX lock to serialise TX operations.	2012-10-31 06:27:58 +00:00
if_ath_alq.c	ath(4) ALQ logging improvements.	2012-11-16 19:39:29 +00:00
if_ath_alq.h	Add in specific TDMA logging types.	2012-11-27 02:24:05 +00:00
if_ath_beacon.c	Extend the beacon code slightly to support AP mode beaconing for the	2012-08-11 23:26:19 +00:00
if_ath_beacon.h	Extend the beacon code slightly to support AP mode beaconing for the	2012-08-11 23:26:19 +00:00
if_ath_debug.c	TX EDMA debugging fixes:	2012-11-05 07:08:45 +00:00
if_ath_debug.h	Add a debug method to dump the EDMA TX status descriptor contents out.	2012-11-03 04:53:44 +00:00
if_ath_keycache.c	Don't allocate or program a key for the AR5210.	2012-11-19 23:54:05 +00:00
if_ath_keycache.h
if_ath_led.c	Bring over the initial 802.11n bluetooth coexistence support code.	2012-06-26 22:16:53 +00:00
if_ath_led.h
if_ath_misc.h	I give up - introduce a TX lock to serialise TX operations.	2012-10-31 06:27:58 +00:00
if_ath_pci.c	I give up - introduce a TX lock to serialise TX operations.	2012-10-31 06:27:58 +00:00
if_ath_rx_edma.c	Add some hooks into the driver to attach, detach and record EDMA descriptor	2012-11-08 18:11:31 +00:00
if_ath_rx_edma.h	Begin abstracting out the RX path in preparation for RX EDMA support.	2012-07-03 06:59:12 +00:00
if_ath_rx.c	ALQ logging enhancements:	2012-11-16 19:57:16 +00:00
if_ath_rx.h	Convert sc_rxpending to a per-EDMA queue, and use that for the legacy code.	2012-07-10 00:02:19 +00:00
if_ath_sysctl.c	Place 'dev.ath.X.debug' back under ATH_DEBUG, rather than ATH_DEBUG_ALQ.	2012-11-13 19:45:13 +00:00
if_ath_sysctl.h
if_ath_tdma.c	Pull out the debugging code from the critical path and make sure it	2012-11-28 01:55:22 +00:00
if_ath_tdma.h
if_ath_tsf.h
if_ath_tx_edma.c	* Remove a duplicate TX ALQ post routine!	2012-11-16 19:58:15 +00:00
if_ath_tx_edma.h	Begin separating out the TX DMA setup in preparation for TX EDMA support.	2012-07-23 03:52:18 +00:00
if_ath_tx_ht.c	For AR9380 NICs - the non-enterprise versions don't support RTS protection	2012-11-03 22:13:42 +00:00
if_ath_tx_ht.h
if_ath_tx.c	Until I figure out what to do here, remind myself that this needs some	2012-11-28 06:55:34 +00:00
if_ath_tx.h	ALQ logging enhancements:	2012-11-16 19:57:16 +00:00
if_ath.c	Call if_free() with the correct vnet context if and only if ifp_vnet	2012-11-28 07:12:08 +00:00
if_athdfs.h	Change the ath_dfs_process_phy_err() method to take an mbuf rather than	2012-06-24 08:09:06 +00:00
if_athioctl.h	Implement my first cut at filtered frames in aggregation sessions.	2012-09-18 10:14:17 +00:00
if_athrate.h	Create an ioctl API for fetching the current rate control information.	2012-07-20 01:27:20 +00:00
if_athvar.h	Add the HAL wrapper for settsf64.	2012-11-23 05:33:01 +00:00