freebsd-dev/sys/dev/usb/wlan/if_runreg.h
Hans Petter Selasky f417369bdd * Fix page fault caused by referring freed node.
While updating Tx stats, already freed node could be referred and cause
page fault. To avoid such panic, spool Tx stats in driver's softc. Then,
on every ratectl interval, grab node though ieee80211_iterate_nodes() and
update ratectl stats.

* Simplify some code in run_iter_func().

* Fix typo

* Use memset instead of bzero (hselasky @)

PR:		kern/153938
Submitted by:	PseudoCylon <moonlightakkiy@yahoo.ca>
Approved by:	thompsa (mentor)
2011-02-14 08:14:06 +00:00

1225 lines
38 KiB
C

/* $OpenBSD: rt2860reg.h,v 1.19 2009/05/18 19:25:07 damien Exp $ */
/*-
* Copyright (c) 2007
* Damien Bergamini <damien.bergamini@free.fr>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
* $FreeBSD$
*/
#ifndef _IF_RUNREG_H_
#define _IF_RUNREG_H_
/* PCI registers */
#define RT2860_PCI_CFG 0x0000
#define RT2860_PCI_EECTRL 0x0004
#define RT2860_PCI_MCUCTRL 0x0008
#define RT2860_PCI_SYSCTRL 0x000c
#define RT2860_PCIE_JTAG 0x0010
#define RT2860_CONFIG_NO 1
#define RT2860_IFACE_INDEX 0
#define RT3070_OPT_14 0x0114
/* SCH/DMA registers */
#define RT2860_INT_STATUS 0x0200
#define RT2860_INT_MASK 0x0204
#define RT2860_WPDMA_GLO_CFG 0x0208
#define RT2860_WPDMA_RST_IDX 0x020c
#define RT2860_DELAY_INT_CFG 0x0210
#define RT2860_WMM_AIFSN_CFG 0x0214
#define RT2860_WMM_CWMIN_CFG 0x0218
#define RT2860_WMM_CWMAX_CFG 0x021c
#define RT2860_WMM_TXOP0_CFG 0x0220
#define RT2860_WMM_TXOP1_CFG 0x0224
#define RT2860_GPIO_CTRL 0x0228
#define RT2860_MCU_CMD_REG 0x022c
#define RT2860_TX_BASE_PTR(qid) (0x0230 + (qid) * 16)
#define RT2860_TX_MAX_CNT(qid) (0x0234 + (qid) * 16)
#define RT2860_TX_CTX_IDX(qid) (0x0238 + (qid) * 16)
#define RT2860_TX_DTX_IDX(qid) (0x023c + (qid) * 16)
#define RT2860_RX_BASE_PTR 0x0290
#define RT2860_RX_MAX_CNT 0x0294
#define RT2860_RX_CALC_IDX 0x0298
#define RT2860_FS_DRX_IDX 0x029c
#define RT2860_USB_DMA_CFG 0x02a0 /* RT2870 only */
#define RT2860_US_CYC_CNT 0x02a4
/* PBF registers */
#define RT2860_SYS_CTRL 0x0400
#define RT2860_HOST_CMD 0x0404
#define RT2860_PBF_CFG 0x0408
#define RT2860_MAX_PCNT 0x040c
#define RT2860_BUF_CTRL 0x0410
#define RT2860_MCU_INT_STA 0x0414
#define RT2860_MCU_INT_ENA 0x0418
#define RT2860_TXQ_IO(qid) (0x041c + (qid) * 4)
#define RT2860_RX0Q_IO 0x0424
#define RT2860_BCN_OFFSET0 0x042c
#define RT2860_BCN_OFFSET1 0x0430
#define RT2860_TXRXQ_STA 0x0434
#define RT2860_TXRXQ_PCNT 0x0438
#define RT2860_PBF_DBG 0x043c
#define RT2860_CAP_CTRL 0x0440
/* RT3070 registers */
#define RT3070_RF_CSR_CFG 0x0500
#define RT3070_EFUSE_CTRL 0x0580
#define RT3070_EFUSE_DATA0 0x0590
#define RT3070_EFUSE_DATA1 0x0594
#define RT3070_EFUSE_DATA2 0x0598
#define RT3070_EFUSE_DATA3 0x059c
#define RT3070_LDO_CFG0 0x05d4
#define RT3070_GPIO_SWITCH 0x05dc
/* MAC registers */
#define RT2860_ASIC_VER_ID 0x1000
#define RT2860_MAC_SYS_CTRL 0x1004
#define RT2860_MAC_ADDR_DW0 0x1008
#define RT2860_MAC_ADDR_DW1 0x100c
#define RT2860_MAC_BSSID_DW0 0x1010
#define RT2860_MAC_BSSID_DW1 0x1014
#define RT2860_MAX_LEN_CFG 0x1018
#define RT2860_BBP_CSR_CFG 0x101c
#define RT2860_RF_CSR_CFG0 0x1020
#define RT2860_RF_CSR_CFG1 0x1024
#define RT2860_RF_CSR_CFG2 0x1028
#define RT2860_LED_CFG 0x102c
/* undocumented registers */
#define RT2860_DEBUG 0x10f4
/* MAC Timing control registers */
#define RT2860_XIFS_TIME_CFG 0x1100
#define RT2860_BKOFF_SLOT_CFG 0x1104
#define RT2860_NAV_TIME_CFG 0x1108
#define RT2860_CH_TIME_CFG 0x110c
#define RT2860_PBF_LIFE_TIMER 0x1110
#define RT2860_BCN_TIME_CFG 0x1114
#define RT2860_TBTT_SYNC_CFG 0x1118
#define RT2860_TSF_TIMER_DW0 0x111c
#define RT2860_TSF_TIMER_DW1 0x1120
#define RT2860_TBTT_TIMER 0x1124
#define RT2860_INT_TIMER_CFG 0x1128
#define RT2860_INT_TIMER_EN 0x112c
#define RT2860_CH_IDLE_TIME 0x1130
/* MAC Power Save configuration registers */
#define RT2860_MAC_STATUS_REG 0x1200
#define RT2860_PWR_PIN_CFG 0x1204
#define RT2860_AUTO_WAKEUP_CFG 0x1208
/* MAC TX configuration registers */
#define RT2860_EDCA_AC_CFG(aci) (0x1300 + (aci) * 4)
#define RT2860_EDCA_TID_AC_MAP 0x1310
#define RT2860_TX_PWR_CFG(ridx) (0x1314 + (ridx) * 4)
#define RT2860_TX_PIN_CFG 0x1328
#define RT2860_TX_BAND_CFG 0x132c
#define RT2860_TX_SW_CFG0 0x1330
#define RT2860_TX_SW_CFG1 0x1334
#define RT2860_TX_SW_CFG2 0x1338
#define RT2860_TXOP_THRES_CFG 0x133c
#define RT2860_TXOP_CTRL_CFG 0x1340
#define RT2860_TX_RTS_CFG 0x1344
#define RT2860_TX_TIMEOUT_CFG 0x1348
#define RT2860_TX_RTY_CFG 0x134c
#define RT2860_TX_LINK_CFG 0x1350
#define RT2860_HT_FBK_CFG0 0x1354
#define RT2860_HT_FBK_CFG1 0x1358
#define RT2860_LG_FBK_CFG0 0x135c
#define RT2860_LG_FBK_CFG1 0x1360
#define RT2860_CCK_PROT_CFG 0x1364
#define RT2860_OFDM_PROT_CFG 0x1368
#define RT2860_MM20_PROT_CFG 0x136c
#define RT2860_MM40_PROT_CFG 0x1370
#define RT2860_GF20_PROT_CFG 0x1374
#define RT2860_GF40_PROT_CFG 0x1378
#define RT2860_EXP_CTS_TIME 0x137c
#define RT2860_EXP_ACK_TIME 0x1380
/* MAC RX configuration registers */
#define RT2860_RX_FILTR_CFG 0x1400
#define RT2860_AUTO_RSP_CFG 0x1404
#define RT2860_LEGACY_BASIC_RATE 0x1408
#define RT2860_HT_BASIC_RATE 0x140c
#define RT2860_HT_CTRL_CFG 0x1410
#define RT2860_SIFS_COST_CFG 0x1414
#define RT2860_RX_PARSER_CFG 0x1418
/* MAC Security configuration registers */
#define RT2860_TX_SEC_CNT0 0x1500
#define RT2860_RX_SEC_CNT0 0x1504
#define RT2860_CCMP_FC_MUTE 0x1508
/* MAC HCCA/PSMP configuration registers */
#define RT2860_TXOP_HLDR_ADDR0 0x1600
#define RT2860_TXOP_HLDR_ADDR1 0x1604
#define RT2860_TXOP_HLDR_ET 0x1608
#define RT2860_QOS_CFPOLL_RA_DW0 0x160c
#define RT2860_QOS_CFPOLL_A1_DW1 0x1610
#define RT2860_QOS_CFPOLL_QC 0x1614
/* MAC Statistics Counters */
#define RT2860_RX_STA_CNT0 0x1700
#define RT2860_RX_STA_CNT1 0x1704
#define RT2860_RX_STA_CNT2 0x1708
#define RT2860_TX_STA_CNT0 0x170c
#define RT2860_TX_STA_CNT1 0x1710
#define RT2860_TX_STA_CNT2 0x1714
#define RT2860_TX_STAT_FIFO 0x1718
/* RX WCID search table */
#define RT2860_WCID_ENTRY(wcid) (0x1800 + (wcid) * 8)
#define RT2860_FW_BASE 0x2000
#define RT2870_FW_BASE 0x3000
/* Pair-wise key table */
#define RT2860_PKEY(wcid) (0x4000 + (wcid) * 32)
/* IV/EIV table */
#define RT2860_IVEIV(wcid) (0x6000 + (wcid) * 8)
/* WCID attribute table */
#define RT2860_WCID_ATTR(wcid) (0x6800 + (wcid) * 4)
/* Shared Key Table */
#define RT2860_SKEY(vap, kidx) (0x6c00 + (vap) * 128 + (kidx) * 32)
/* Shared Key Mode */
#define RT2860_SKEY_MODE_0_7 0x7000
#define RT2860_SKEY_MODE_8_15 0x7004
#define RT2860_SKEY_MODE_16_23 0x7008
#define RT2860_SKEY_MODE_24_31 0x700c
/* Shared Memory between MCU and host */
#define RT2860_H2M_MAILBOX 0x7010
#define RT2860_H2M_MAILBOX_CID 0x7014
#define RT2860_H2M_MAILBOX_STATUS 0x701c
#define RT2860_H2M_BBPAGENT 0x7028
#define RT2860_BCN_BASE(vap) (0x7800 + (vap) * 512)
/* possible flags for register RT2860_PCI_EECTRL */
#define RT2860_C (1 << 0)
#define RT2860_S (1 << 1)
#define RT2860_D (1 << 2)
#define RT2860_SHIFT_D 2
#define RT2860_Q (1 << 3)
#define RT2860_SHIFT_Q 3
/* possible flags for registers INT_STATUS/INT_MASK */
#define RT2860_TX_COHERENT (1 << 17)
#define RT2860_RX_COHERENT (1 << 16)
#define RT2860_MAC_INT_4 (1 << 15)
#define RT2860_MAC_INT_3 (1 << 14)
#define RT2860_MAC_INT_2 (1 << 13)
#define RT2860_MAC_INT_1 (1 << 12)
#define RT2860_MAC_INT_0 (1 << 11)
#define RT2860_TX_RX_COHERENT (1 << 10)
#define RT2860_MCU_CMD_INT (1 << 9)
#define RT2860_TX_DONE_INT5 (1 << 8)
#define RT2860_TX_DONE_INT4 (1 << 7)
#define RT2860_TX_DONE_INT3 (1 << 6)
#define RT2860_TX_DONE_INT2 (1 << 5)
#define RT2860_TX_DONE_INT1 (1 << 4)
#define RT2860_TX_DONE_INT0 (1 << 3)
#define RT2860_RX_DONE_INT (1 << 2)
#define RT2860_TX_DLY_INT (1 << 1)
#define RT2860_RX_DLY_INT (1 << 0)
/* possible flags for register WPDMA_GLO_CFG */
#define RT2860_HDR_SEG_LEN_SHIFT 8
#define RT2860_BIG_ENDIAN (1 << 7)
#define RT2860_TX_WB_DDONE (1 << 6)
#define RT2860_WPDMA_BT_SIZE_SHIFT 4
#define RT2860_WPDMA_BT_SIZE16 0
#define RT2860_WPDMA_BT_SIZE32 1
#define RT2860_WPDMA_BT_SIZE64 2
#define RT2860_WPDMA_BT_SIZE128 3
#define RT2860_RX_DMA_BUSY (1 << 3)
#define RT2860_RX_DMA_EN (1 << 2)
#define RT2860_TX_DMA_BUSY (1 << 1)
#define RT2860_TX_DMA_EN (1 << 0)
/* possible flags for register DELAY_INT_CFG */
#define RT2860_TXDLY_INT_EN (1 << 31)
#define RT2860_TXMAX_PINT_SHIFT 24
#define RT2860_TXMAX_PTIME_SHIFT 16
#define RT2860_RXDLY_INT_EN (1 << 15)
#define RT2860_RXMAX_PINT_SHIFT 8
#define RT2860_RXMAX_PTIME_SHIFT 0
/* possible flags for register GPIO_CTRL */
#define RT2860_GPIO_D_SHIFT 8
#define RT2860_GPIO_O_SHIFT 0
/* possible flags for register USB_DMA_CFG */
#define RT2860_USB_TX_BUSY (1 << 31)
#define RT2860_USB_RX_BUSY (1 << 30)
#define RT2860_USB_EPOUT_VLD_SHIFT 24
#define RT2860_USB_TX_EN (1 << 23)
#define RT2860_USB_RX_EN (1 << 22)
#define RT2860_USB_RX_AGG_EN (1 << 21)
#define RT2860_USB_TXOP_HALT (1 << 20)
#define RT2860_USB_TX_CLEAR (1 << 19)
#define RT2860_USB_PHY_WD_EN (1 << 16)
#define RT2860_USB_PHY_MAN_RST (1 << 15)
#define RT2860_USB_RX_AGG_LMT(x) ((x) << 8) /* in unit of 1KB */
#define RT2860_USB_RX_AGG_TO(x) ((x) & 0xff) /* in unit of 33ns */
/* possible flags for register US_CYC_CNT */
#define RT2860_TEST_EN (1 << 24)
#define RT2860_TEST_SEL_SHIFT 16
#define RT2860_BT_MODE_EN (1 << 8)
#define RT2860_US_CYC_CNT_SHIFT 0
/* possible flags for register SYS_CTRL */
#define RT2860_HST_PM_SEL (1 << 16)
#define RT2860_CAP_MODE (1 << 14)
#define RT2860_PME_OEN (1 << 13)
#define RT2860_CLKSELECT (1 << 12)
#define RT2860_PBF_CLK_EN (1 << 11)
#define RT2860_MAC_CLK_EN (1 << 10)
#define RT2860_DMA_CLK_EN (1 << 9)
#define RT2860_MCU_READY (1 << 7)
#define RT2860_ASY_RESET (1 << 4)
#define RT2860_PBF_RESET (1 << 3)
#define RT2860_MAC_RESET (1 << 2)
#define RT2860_DMA_RESET (1 << 1)
#define RT2860_MCU_RESET (1 << 0)
/* possible values for register HOST_CMD */
#define RT2860_MCU_CMD_SLEEP 0x30
#define RT2860_MCU_CMD_WAKEUP 0x31
#define RT2860_MCU_CMD_LEDS 0x50
#define RT2860_MCU_CMD_LED_RSSI 0x51
#define RT2860_MCU_CMD_LED1 0x52
#define RT2860_MCU_CMD_LED2 0x53
#define RT2860_MCU_CMD_LED3 0x54
#define RT2860_MCU_CMD_RFRESET 0x72
#define RT2860_MCU_CMD_ANTSEL 0x73
#define RT2860_MCU_CMD_BBP 0x80
#define RT2860_MCU_CMD_PSLEVEL 0x83
/* possible flags for register PBF_CFG */
#define RT2860_TX1Q_NUM_SHIFT 21
#define RT2860_TX2Q_NUM_SHIFT 16
#define RT2860_NULL0_MODE (1 << 15)
#define RT2860_NULL1_MODE (1 << 14)
#define RT2860_RX_DROP_MODE (1 << 13)
#define RT2860_TX0Q_MANUAL (1 << 12)
#define RT2860_TX1Q_MANUAL (1 << 11)
#define RT2860_TX2Q_MANUAL (1 << 10)
#define RT2860_RX0Q_MANUAL (1 << 9)
#define RT2860_HCCA_EN (1 << 8)
#define RT2860_TX0Q_EN (1 << 4)
#define RT2860_TX1Q_EN (1 << 3)
#define RT2860_TX2Q_EN (1 << 2)
#define RT2860_RX0Q_EN (1 << 1)
/* possible flags for register BUF_CTRL */
#define RT2860_WRITE_TXQ(qid) (1 << (11 - (qid)))
#define RT2860_NULL0_KICK (1 << 7)
#define RT2860_NULL1_KICK (1 << 6)
#define RT2860_BUF_RESET (1 << 5)
#define RT2860_READ_TXQ(qid) (1 << (3 - (qid))
#define RT2860_READ_RX0Q (1 << 0)
/* possible flags for registers MCU_INT_STA/MCU_INT_ENA */
#define RT2860_MCU_MAC_INT_8 (1 << 24)
#define RT2860_MCU_MAC_INT_7 (1 << 23)
#define RT2860_MCU_MAC_INT_6 (1 << 22)
#define RT2860_MCU_MAC_INT_4 (1 << 20)
#define RT2860_MCU_MAC_INT_3 (1 << 19)
#define RT2860_MCU_MAC_INT_2 (1 << 18)
#define RT2860_MCU_MAC_INT_1 (1 << 17)
#define RT2860_MCU_MAC_INT_0 (1 << 16)
#define RT2860_DTX0_INT (1 << 11)
#define RT2860_DTX1_INT (1 << 10)
#define RT2860_DTX2_INT (1 << 9)
#define RT2860_DRX0_INT (1 << 8)
#define RT2860_HCMD_INT (1 << 7)
#define RT2860_N0TX_INT (1 << 6)
#define RT2860_N1TX_INT (1 << 5)
#define RT2860_BCNTX_INT (1 << 4)
#define RT2860_MTX0_INT (1 << 3)
#define RT2860_MTX1_INT (1 << 2)
#define RT2860_MTX2_INT (1 << 1)
#define RT2860_MRX0_INT (1 << 0)
/* possible flags for register TXRXQ_PCNT */
#define RT2860_RX0Q_PCNT_MASK 0xff000000
#define RT2860_TX2Q_PCNT_MASK 0x00ff0000
#define RT2860_TX1Q_PCNT_MASK 0x0000ff00
#define RT2860_TX0Q_PCNT_MASK 0x000000ff
/* possible flags for register CAP_CTRL */
#define RT2860_CAP_ADC_FEQ (1 << 31)
#define RT2860_CAP_START (1 << 30)
#define RT2860_MAN_TRIG (1 << 29)
#define RT2860_TRIG_OFFSET_SHIFT 16
#define RT2860_START_ADDR_SHIFT 0
/* possible flags for register RF_CSR_CFG */
#define RT3070_RF_KICK (1 << 17)
#define RT3070_RF_WRITE (1 << 16)
/* possible flags for register EFUSE_CTRL */
#define RT3070_SEL_EFUSE (1 << 31)
#define RT3070_EFSROM_KICK (1 << 30)
#define RT3070_EFSROM_AIN_MASK 0x03ff0000
#define RT3070_EFSROM_AIN_SHIFT 16
#define RT3070_EFSROM_MODE_MASK 0x000000c0
#define RT3070_EFUSE_AOUT_MASK 0x0000003f
/* possible flags for register MAC_SYS_CTRL */
#define RT2860_RX_TS_EN (1 << 7)
#define RT2860_WLAN_HALT_EN (1 << 6)
#define RT2860_PBF_LOOP_EN (1 << 5)
#define RT2860_CONT_TX_TEST (1 << 4)
#define RT2860_MAC_RX_EN (1 << 3)
#define RT2860_MAC_TX_EN (1 << 2)
#define RT2860_BBP_HRST (1 << 1)
#define RT2860_MAC_SRST (1 << 0)
/* possible flags for register MAC_BSSID_DW1 */
#define RT2860_MULTI_BCN_NUM_SHIFT 18
#define RT2860_MULTI_BSSID_MODE_SHIFT 16
/* possible flags for register MAX_LEN_CFG */
#define RT2860_MIN_MPDU_LEN_SHIFT 16
#define RT2860_MAX_PSDU_LEN_SHIFT 12
#define RT2860_MAX_PSDU_LEN8K 0
#define RT2860_MAX_PSDU_LEN16K 1
#define RT2860_MAX_PSDU_LEN32K 2
#define RT2860_MAX_PSDU_LEN64K 3
#define RT2860_MAX_MPDU_LEN_SHIFT 0
/* possible flags for registers BBP_CSR_CFG/H2M_BBPAGENT */
#define RT2860_BBP_RW_PARALLEL (1 << 19)
#define RT2860_BBP_PAR_DUR_112_5 (1 << 18)
#define RT2860_BBP_CSR_KICK (1 << 17)
#define RT2860_BBP_CSR_READ (1 << 16)
#define RT2860_BBP_ADDR_SHIFT 8
#define RT2860_BBP_DATA_SHIFT 0
/* possible flags for register RF_CSR_CFG0 */
#define RT2860_RF_REG_CTRL (1 << 31)
#define RT2860_RF_LE_SEL1 (1 << 30)
#define RT2860_RF_LE_STBY (1 << 29)
#define RT2860_RF_REG_WIDTH_SHIFT 24
#define RT2860_RF_REG_0_SHIFT 0
/* possible flags for register RF_CSR_CFG1 */
#define RT2860_RF_DUR_5 (1 << 24)
#define RT2860_RF_REG_1_SHIFT 0
/* possible flags for register LED_CFG */
#define RT2860_LED_POL (1 << 30)
#define RT2860_Y_LED_MODE_SHIFT 28
#define RT2860_G_LED_MODE_SHIFT 26
#define RT2860_R_LED_MODE_SHIFT 24
#define RT2860_LED_MODE_OFF 0
#define RT2860_LED_MODE_BLINK_TX 1
#define RT2860_LED_MODE_SLOW_BLINK 2
#define RT2860_LED_MODE_ON 3
#define RT2860_SLOW_BLK_TIME_SHIFT 16
#define RT2860_LED_OFF_TIME_SHIFT 8
#define RT2860_LED_ON_TIME_SHIFT 0
/* possible flags for register XIFS_TIME_CFG */
#define RT2860_BB_RXEND_EN (1 << 29)
#define RT2860_EIFS_TIME_SHIFT 20
#define RT2860_OFDM_XIFS_TIME_SHIFT 16
#define RT2860_OFDM_SIFS_TIME_SHIFT 8
#define RT2860_CCK_SIFS_TIME_SHIFT 0
/* possible flags for register BKOFF_SLOT_CFG */
#define RT2860_CC_DELAY_TIME_SHIFT 8
#define RT2860_SLOT_TIME 0
/* possible flags for register NAV_TIME_CFG */
#define RT2860_NAV_UPD (1 << 31)
#define RT2860_NAV_UPD_VAL_SHIFT 16
#define RT2860_NAV_CLR_EN (1 << 15)
#define RT2860_NAV_TIMER_SHIFT 0
/* possible flags for register CH_TIME_CFG */
#define RT2860_EIFS_AS_CH_BUSY (1 << 4)
#define RT2860_NAV_AS_CH_BUSY (1 << 3)
#define RT2860_RX_AS_CH_BUSY (1 << 2)
#define RT2860_TX_AS_CH_BUSY (1 << 1)
#define RT2860_CH_STA_TIMER_EN (1 << 0)
/* possible values for register BCN_TIME_CFG */
#define RT2860_TSF_INS_COMP_SHIFT 24
#define RT2860_BCN_TX_EN (1 << 20)
#define RT2860_TBTT_TIMER_EN (1 << 19)
#define RT2860_TSF_SYNC_MODE_SHIFT 17
#define RT2860_TSF_SYNC_MODE_DIS 0
#define RT2860_TSF_SYNC_MODE_STA 1
#define RT2860_TSF_SYNC_MODE_IBSS 2
#define RT2860_TSF_SYNC_MODE_HOSTAP 3
#define RT2860_TSF_TIMER_EN (1 << 16)
#define RT2860_BCN_INTVAL_SHIFT 0
/* possible flags for register TBTT_SYNC_CFG */
#define RT2860_BCN_CWMIN_SHIFT 20
#define RT2860_BCN_AIFSN_SHIFT 16
#define RT2860_BCN_EXP_WIN_SHIFT 8
#define RT2860_TBTT_ADJUST_SHIFT 0
/* possible flags for register INT_TIMER_CFG */
#define RT2860_GP_TIMER_SHIFT 16
#define RT2860_PRE_TBTT_TIMER_SHIFT 0
/* possible flags for register INT_TIMER_EN */
#define RT2860_GP_TIMER_EN (1 << 1)
#define RT2860_PRE_TBTT_INT_EN (1 << 0)
/* possible flags for register MAC_STATUS_REG */
#define RT2860_RX_STATUS_BUSY (1 << 1)
#define RT2860_TX_STATUS_BUSY (1 << 0)
/* possible flags for register PWR_PIN_CFG */
#define RT2860_IO_ADDA_PD (1 << 3)
#define RT2860_IO_PLL_PD (1 << 2)
#define RT2860_IO_RA_PE (1 << 1)
#define RT2860_IO_RF_PE (1 << 0)
/* possible flags for register AUTO_WAKEUP_CFG */
#define RT2860_AUTO_WAKEUP_EN (1 << 15)
#define RT2860_SLEEP_TBTT_NUM_SHIFT 8
#define RT2860_WAKEUP_LEAD_TIME_SHIFT 0
/* possible flags for register TX_PIN_CFG */
#define RT2860_TRSW_POL (1 << 19)
#define RT2860_TRSW_EN (1 << 18)
#define RT2860_RFTR_POL (1 << 17)
#define RT2860_RFTR_EN (1 << 16)
#define RT2860_LNA_PE_G1_POL (1 << 15)
#define RT2860_LNA_PE_A1_POL (1 << 14)
#define RT2860_LNA_PE_G0_POL (1 << 13)
#define RT2860_LNA_PE_A0_POL (1 << 12)
#define RT2860_LNA_PE_G1_EN (1 << 11)
#define RT2860_LNA_PE_A1_EN (1 << 10)
#define RT2860_LNA_PE1_EN (RT2860_LNA_PE_A1_EN | RT2860_LNA_PE_G1_EN)
#define RT2860_LNA_PE_G0_EN (1 << 9)
#define RT2860_LNA_PE_A0_EN (1 << 8)
#define RT2860_LNA_PE0_EN (RT2860_LNA_PE_A0_EN | RT2860_LNA_PE_G0_EN)
#define RT2860_PA_PE_G1_POL (1 << 7)
#define RT2860_PA_PE_A1_POL (1 << 6)
#define RT2860_PA_PE_G0_POL (1 << 5)
#define RT2860_PA_PE_A0_POL (1 << 4)
#define RT2860_PA_PE_G1_EN (1 << 3)
#define RT2860_PA_PE_A1_EN (1 << 2)
#define RT2860_PA_PE_G0_EN (1 << 1)
#define RT2860_PA_PE_A0_EN (1 << 0)
/* possible flags for register TX_BAND_CFG */
#define RT2860_5G_BAND_SEL_N (1 << 2)
#define RT2860_5G_BAND_SEL_P (1 << 1)
#define RT2860_TX_BAND_SEL (1 << 0)
/* possible flags for register TX_SW_CFG0 */
#define RT2860_DLY_RFTR_EN_SHIFT 24
#define RT2860_DLY_TRSW_EN_SHIFT 16
#define RT2860_DLY_PAPE_EN_SHIFT 8
#define RT2860_DLY_TXPE_EN_SHIFT 0
/* possible flags for register TX_SW_CFG1 */
#define RT2860_DLY_RFTR_DIS_SHIFT 16
#define RT2860_DLY_TRSW_DIS_SHIFT 8
#define RT2860_DLY_PAPE_DIS SHIFT 0
/* possible flags for register TX_SW_CFG2 */
#define RT2860_DLY_LNA_EN_SHIFT 24
#define RT2860_DLY_LNA_DIS_SHIFT 16
#define RT2860_DLY_DAC_EN_SHIFT 8
#define RT2860_DLY_DAC_DIS_SHIFT 0
/* possible flags for register TXOP_THRES_CFG */
#define RT2860_TXOP_REM_THRES_SHIFT 24
#define RT2860_CF_END_THRES_SHIFT 16
#define RT2860_RDG_IN_THRES 8
#define RT2860_RDG_OUT_THRES 0
/* possible flags for register TXOP_CTRL_CFG */
#define RT2860_EXT_CW_MIN_SHIFT 16
#define RT2860_EXT_CCA_DLY_SHIFT 8
#define RT2860_EXT_CCA_EN (1 << 7)
#define RT2860_LSIG_TXOP_EN (1 << 6)
#define RT2860_TXOP_TRUN_EN_MIMOPS (1 << 4)
#define RT2860_TXOP_TRUN_EN_TXOP (1 << 3)
#define RT2860_TXOP_TRUN_EN_RATE (1 << 2)
#define RT2860_TXOP_TRUN_EN_AC (1 << 1)
#define RT2860_TXOP_TRUN_EN_TIMEOUT (1 << 0)
/* possible flags for register TX_RTS_CFG */
#define RT2860_RTS_FBK_EN (1 << 24)
#define RT2860_RTS_THRES_SHIFT 8
#define RT2860_RTS_RTY_LIMIT_SHIFT 0
/* possible flags for register TX_TIMEOUT_CFG */
#define RT2860_TXOP_TIMEOUT_SHIFT 16
#define RT2860_RX_ACK_TIMEOUT_SHIFT 8
#define RT2860_MPDU_LIFE_TIME_SHIFT 4
/* possible flags for register TX_RTY_CFG */
#define RT2860_TX_AUTOFB_EN (1 << 30)
#define RT2860_AGG_RTY_MODE_TIMER (1 << 29)
#define RT2860_NAG_RTY_MODE_TIMER (1 << 28)
#define RT2860_LONG_RTY_THRES_SHIFT 16
#define RT2860_LONG_RTY_LIMIT_SHIFT 8
#define RT2860_SHORT_RTY_LIMIT_SHIFT 0
/* possible flags for register TX_LINK_CFG */
#define RT2860_REMOTE_MFS_SHIFT 24
#define RT2860_REMOTE_MFB_SHIFT 16
#define RT2860_TX_CFACK_EN (1 << 12)
#define RT2860_TX_RDG_EN (1 << 11)
#define RT2860_TX_MRQ_EN (1 << 10)
#define RT2860_REMOTE_UMFS_EN (1 << 9)
#define RT2860_TX_MFB_EN (1 << 8)
#define RT2860_REMOTE_MFB_LT_SHIFT 0
/* possible flags for registers *_PROT_CFG */
#define RT2860_RTSTH_EN (1 << 26)
#define RT2860_TXOP_ALLOW_GF40 (1 << 25)
#define RT2860_TXOP_ALLOW_GF20 (1 << 24)
#define RT2860_TXOP_ALLOW_MM40 (1 << 23)
#define RT2860_TXOP_ALLOW_MM20 (1 << 22)
#define RT2860_TXOP_ALLOW_OFDM (1 << 21)
#define RT2860_TXOP_ALLOW_CCK (1 << 20)
#define RT2860_TXOP_ALLOW_ALL (0x3f << 20)
#define RT2860_PROT_NAV_SHORT (1 << 18)
#define RT2860_PROT_NAV_LONG (2 << 18)
#define RT2860_PROT_CTRL_RTS_CTS (1 << 16)
#define RT2860_PROT_CTRL_CTS (2 << 16)
/* possible flags for registers EXP_{CTS,ACK}_TIME */
#define RT2860_EXP_OFDM_TIME_SHIFT 16
#define RT2860_EXP_CCK_TIME_SHIFT 0
/* possible flags for register RX_FILTR_CFG */
#define RT2860_DROP_CTRL_RSV (1 << 16)
#define RT2860_DROP_BAR (1 << 15)
#define RT2860_DROP_BA (1 << 14)
#define RT2860_DROP_PSPOLL (1 << 13)
#define RT2860_DROP_RTS (1 << 12)
#define RT2860_DROP_CTS (1 << 11)
#define RT2860_DROP_ACK (1 << 10)
#define RT2860_DROP_CFEND (1 << 9)
#define RT2860_DROP_CFACK (1 << 8)
#define RT2860_DROP_DUPL (1 << 7)
#define RT2860_DROP_BC (1 << 6)
#define RT2860_DROP_MC (1 << 5)
#define RT2860_DROP_VER_ERR (1 << 4)
#define RT2860_DROP_NOT_MYBSS (1 << 3)
#define RT2860_DROP_UC_NOME (1 << 2)
#define RT2860_DROP_PHY_ERR (1 << 1)
#define RT2860_DROP_CRC_ERR (1 << 0)
/* possible flags for register AUTO_RSP_CFG */
#define RT2860_CTRL_PWR_BIT (1 << 7)
#define RT2860_BAC_ACK_POLICY (1 << 6)
#define RT2860_CCK_SHORT_EN (1 << 4)
#define RT2860_CTS_40M_REF_EN (1 << 3)
#define RT2860_CTS_40M_MODE_EN (1 << 2)
#define RT2860_BAC_ACKPOLICY_EN (1 << 1)
#define RT2860_AUTO_RSP_EN (1 << 0)
/* possible flags for register SIFS_COST_CFG */
#define RT2860_OFDM_SIFS_COST_SHIFT 8
#define RT2860_CCK_SIFS_COST_SHIFT 0
/* possible flags for register TXOP_HLDR_ET */
#define RT2860_TXOP_ETM1_EN (1 << 25)
#define RT2860_TXOP_ETM0_EN (1 << 24)
#define RT2860_TXOP_ETM_THRES_SHIFT 16
#define RT2860_TXOP_ETO_EN (1 << 8)
#define RT2860_TXOP_ETO_THRES_SHIFT 1
#define RT2860_PER_RX_RST_EN (1 << 0)
/* possible flags for register TX_STAT_FIFO */
#define RT2860_TXQ_MCS_SHIFT 16
#define RT2860_TXQ_WCID_SHIFT 8
#define RT2860_TXQ_ACKREQ (1 << 7)
#define RT2860_TXQ_AGG (1 << 6)
#define RT2860_TXQ_OK (1 << 5)
#define RT2860_TXQ_PID_SHIFT 1
#define RT2860_TXQ_VLD (1 << 0)
/* possible flags for register WCID_ATTR */
#define RT2860_MODE_NOSEC 0
#define RT2860_MODE_WEP40 1
#define RT2860_MODE_WEP104 2
#define RT2860_MODE_TKIP 3
#define RT2860_MODE_AES_CCMP 4
#define RT2860_MODE_CKIP40 5
#define RT2860_MODE_CKIP104 6
#define RT2860_MODE_CKIP128 7
#define RT2860_RX_PKEY_EN (1 << 0)
/* possible flags for register H2M_MAILBOX */
#define RT2860_H2M_BUSY (1 << 24)
#define RT2860_TOKEN_NO_INTR 0xff
/* possible flags for MCU command RT2860_MCU_CMD_LEDS */
#define RT2860_LED_RADIO (1 << 13)
#define RT2860_LED_LINK_2GHZ (1 << 14)
#define RT2860_LED_LINK_5GHZ (1 << 15)
/* possible flags for RT3020 RF register 1 */
#define RT3070_RF_BLOCK (1 << 0)
#define RT3070_RX0_PD (1 << 2)
#define RT3070_TX0_PD (1 << 3)
#define RT3070_RX1_PD (1 << 4)
#define RT3070_TX1_PD (1 << 5)
/* possible flags for RT3020 RF register 15 */
#define RT3070_TX_LO2 (1 << 3)
/* possible flags for RT3020 RF register 17 */
#define RT3070_TX_LO1 (1 << 3)
/* possible flags for RT3020 RF register 20 */
#define RT3070_RX_LO1 (1 << 3)
/* possible flags for RT3020 RF register 21 */
#define RT3070_RX_LO2 (1 << 3)
/* RT2860 TX descriptor */
struct rt2860_txd {
uint32_t sdp0; /* Segment Data Pointer 0 */
uint16_t sdl1; /* Segment Data Length 1 */
#define RT2860_TX_BURST (1 << 15)
#define RT2860_TX_LS1 (1 << 14) /* SDP1 is the last segment */
uint16_t sdl0; /* Segment Data Length 0 */
#define RT2860_TX_DDONE (1 << 15)
#define RT2860_TX_LS0 (1 << 14) /* SDP0 is the last segment */
uint32_t sdp1; /* Segment Data Pointer 1 */
uint8_t reserved[3];
uint8_t flags;
#define RT2860_TX_QSEL_SHIFT 1
#define RT2860_TX_QSEL_MGMT (0 << 1)
#define RT2860_TX_QSEL_HCCA (1 << 1)
#define RT2860_TX_QSEL_EDCA (2 << 1)
#define RT2860_TX_WIV (1 << 0)
} __packed;
/* RT2870 TX descriptor */
struct rt2870_txd {
uint16_t len;
uint8_t pad;
uint8_t flags;
} __packed;
/* TX Wireless Information */
struct rt2860_txwi {
uint8_t flags;
#define RT2860_TX_MPDU_DSITY_SHIFT 5
#define RT2860_TX_AMPDU (1 << 4)
#define RT2860_TX_TS (1 << 3)
#define RT2860_TX_CFACK (1 << 2)
#define RT2860_TX_MMPS (1 << 1)
#define RT2860_TX_FRAG (1 << 0)
uint8_t txop;
#define RT2860_TX_TXOP_HT 0
#define RT2860_TX_TXOP_PIFS 1
#define RT2860_TX_TXOP_SIFS 2
#define RT2860_TX_TXOP_BACKOFF 3
uint16_t phy;
#define RT2860_PHY_MODE 0xc000
#define RT2860_PHY_CCK (0 << 14)
#define RT2860_PHY_OFDM (1 << 14)
#define RT2860_PHY_HT (2 << 14)
#define RT2860_PHY_HT_GF (3 << 14)
#define RT2860_PHY_SGI (1 << 8)
#define RT2860_PHY_BW40 (1 << 7)
#define RT2860_PHY_MCS 0x7f
#define RT2860_PHY_SHPRE (1 << 3)
uint8_t xflags;
#define RT2860_TX_BAWINSIZE_SHIFT 2
#define RT2860_TX_NSEQ (1 << 1)
#define RT2860_TX_ACK (1 << 0)
uint8_t wcid; /* Wireless Client ID */
uint16_t len;
#define RT2860_TX_PID_SHIFT 12
uint32_t iv;
uint32_t eiv;
} __packed;
/* RT2860 RX descriptor */
struct rt2860_rxd {
uint32_t sdp0;
uint16_t sdl1; /* unused */
uint16_t sdl0;
#define RT2860_RX_DDONE (1 << 15)
#define RT2860_RX_LS0 (1 << 14)
uint32_t sdp1; /* unused */
uint32_t flags;
#define RT2860_RX_DEC (1 << 16)
#define RT2860_RX_AMPDU (1 << 15)
#define RT2860_RX_L2PAD (1 << 14)
#define RT2860_RX_RSSI (1 << 13)
#define RT2860_RX_HTC (1 << 12)
#define RT2860_RX_AMSDU (1 << 11)
#define RT2860_RX_MICERR (1 << 10)
#define RT2860_RX_ICVERR (1 << 9)
#define RT2860_RX_CRCERR (1 << 8)
#define RT2860_RX_MYBSS (1 << 7)
#define RT2860_RX_BC (1 << 6)
#define RT2860_RX_MC (1 << 5)
#define RT2860_RX_UC2ME (1 << 4)
#define RT2860_RX_FRAG (1 << 3)
#define RT2860_RX_NULL (1 << 2)
#define RT2860_RX_DATA (1 << 1)
#define RT2860_RX_BA (1 << 0)
} __packed;
/* RT2870 RX descriptor */
struct rt2870_rxd {
/* single 32-bit field */
uint32_t flags;
} __packed;
/* RX Wireless Information */
struct rt2860_rxwi {
uint8_t wcid;
uint8_t keyidx;
#define RT2860_RX_UDF_SHIFT 5
#define RT2860_RX_BSS_IDX_SHIFT 2
uint16_t len;
#define RT2860_RX_TID_SHIFT 12
uint16_t seq;
uint16_t phy;
uint8_t rssi[3];
uint8_t reserved1;
uint8_t snr[2];
uint16_t reserved2;
} __packed;
/* first DMA segment contains TXWI + 802.11 header + 32-bit padding */
#define RT2860_TXWI_DMASZ \
(sizeof (struct rt2860_txwi) + \
sizeof (struct ieee80211_htframe) + \
sizeof (uint16_t))
#define RT2860_RF1 0
#define RT2860_RF2 2
#define RT2860_RF3 1
#define RT2860_RF4 3
#define RT2860_RF_2820 1 /* 2T3R */
#define RT2860_RF_2850 2 /* dual-band 2T3R */
#define RT2860_RF_2720 3 /* 1T2R */
#define RT2860_RF_2750 4 /* dual-band 1T2R */
#define RT3070_RF_3020 5 /* 1T1R */
#define RT3070_RF_2020 6 /* b/g */
#define RT3070_RF_3021 7 /* 1T2R */
#define RT3070_RF_3022 8 /* 2T2R */
#define RT3070_RF_3052 9 /* dual-band 2T2R */
/* USB commands for RT2870 only */
#define RT2870_RESET 1
#define RT2870_WRITE_2 2
#define RT2870_WRITE_REGION_1 6
#define RT2870_READ_REGION_1 7
#define RT2870_EEPROM_READ 9
#define RT2860_EEPROM_DELAY 1 /* minimum hold time (microsecond) */
#define RT2860_EEPROM_VERSION 0x01
#define RT2860_EEPROM_MAC01 0x02
#define RT2860_EEPROM_MAC23 0x03
#define RT2860_EEPROM_MAC45 0x04
#define RT2860_EEPROM_PCIE_PSLEVEL 0x11
#define RT2860_EEPROM_REV 0x12
#define RT2860_EEPROM_ANTENNA 0x1a
#define RT2860_EEPROM_CONFIG 0x1b
#define RT2860_EEPROM_COUNTRY 0x1c
#define RT2860_EEPROM_FREQ_LEDS 0x1d
#define RT2860_EEPROM_LED1 0x1e
#define RT2860_EEPROM_LED2 0x1f
#define RT2860_EEPROM_LED3 0x20
#define RT2860_EEPROM_LNA 0x22
#define RT2860_EEPROM_RSSI1_2GHZ 0x23
#define RT2860_EEPROM_RSSI2_2GHZ 0x24
#define RT2860_EEPROM_RSSI1_5GHZ 0x25
#define RT2860_EEPROM_RSSI2_5GHZ 0x26
#define RT2860_EEPROM_DELTAPWR 0x28
#define RT2860_EEPROM_PWR2GHZ_BASE1 0x29
#define RT2860_EEPROM_PWR2GHZ_BASE2 0x30
#define RT2860_EEPROM_TSSI1_2GHZ 0x37
#define RT2860_EEPROM_TSSI2_2GHZ 0x38
#define RT2860_EEPROM_TSSI3_2GHZ 0x39
#define RT2860_EEPROM_TSSI4_2GHZ 0x3a
#define RT2860_EEPROM_TSSI5_2GHZ 0x3b
#define RT2860_EEPROM_PWR5GHZ_BASE1 0x3c
#define RT2860_EEPROM_PWR5GHZ_BASE2 0x53
#define RT2860_EEPROM_TSSI1_5GHZ 0x6a
#define RT2860_EEPROM_TSSI2_5GHZ 0x6b
#define RT2860_EEPROM_TSSI3_5GHZ 0x6c
#define RT2860_EEPROM_TSSI4_5GHZ 0x6d
#define RT2860_EEPROM_TSSI5_5GHZ 0x6e
#define RT2860_EEPROM_RPWR 0x6f
#define RT2860_EEPROM_BBP_BASE 0x78
#define RT3071_EEPROM_RF_BASE 0x82
#define RT2860_RIDX_CCK1 0
#define RT2860_RIDX_CCK11 3
#define RT2860_RIDX_OFDM6 4
#define RT2860_RIDX_MAX 12
static const struct rt2860_rate {
uint8_t rate;
uint8_t mcs;
enum ieee80211_phytype phy;
uint8_t ctl_ridx;
uint16_t sp_ack_dur;
uint16_t lp_ack_dur;
} rt2860_rates[] = {
{ 2, 0, IEEE80211_T_DS, 0, 314, 314 },
{ 4, 1, IEEE80211_T_DS, 1, 258, 162 },
{ 11, 2, IEEE80211_T_DS, 2, 223, 127 },
{ 22, 3, IEEE80211_T_DS, 3, 213, 117 },
{ 12, 0, IEEE80211_T_OFDM, 4, 60, 60 },
{ 18, 1, IEEE80211_T_OFDM, 4, 52, 52 },
{ 24, 2, IEEE80211_T_OFDM, 6, 48, 48 },
{ 36, 3, IEEE80211_T_OFDM, 6, 44, 44 },
{ 48, 4, IEEE80211_T_OFDM, 8, 44, 44 },
{ 72, 5, IEEE80211_T_OFDM, 8, 40, 40 },
{ 96, 6, IEEE80211_T_OFDM, 8, 40, 40 },
{ 108, 7, IEEE80211_T_OFDM, 8, 40, 40 }
};
/*
* Control and status registers access macros.
*/
#define RAL_READ(sc, reg) \
bus_space_read_4((sc)->sc_st, (sc)->sc_sh, (reg))
#define RAL_WRITE(sc, reg, val) \
bus_space_write_4((sc)->sc_st, (sc)->sc_sh, (reg), (val))
#define RAL_BARRIER_WRITE(sc) \
bus_space_barrier((sc)->sc_st, (sc)->sc_sh, 0, 0x1800, \
BUS_SPACE_BARRIER_WRITE)
#define RAL_BARRIER_READ_WRITE(sc) \
bus_space_barrier((sc)->sc_st, (sc)->sc_sh, 0, 0x1800, \
BUS_SPACE_BARRIER_READ | BUS_SPACE_BARRIER_WRITE)
#define RAL_WRITE_REGION_1(sc, offset, datap, count) \
bus_space_write_region_1((sc)->sc_st, (sc)->sc_sh, (offset), \
(datap), (count))
#define RAL_SET_REGION_4(sc, offset, val, count) \
bus_space_set_region_4((sc)->sc_st, (sc)->sc_sh, (offset), \
(val), (count))
/*
* EEPROM access macro.
*/
#define RT2860_EEPROM_CTL(sc, val) do { \
RAL_WRITE((sc), RT2860_PCI_EECTRL, (val)); \
RAL_BARRIER_READ_WRITE((sc)); \
DELAY(RT2860_EEPROM_DELAY); \
} while (/* CONSTCOND */0)
/*
* Default values for MAC registers; values taken from the reference driver.
*/
#define RT2860_DEF_MAC \
{ RT2860_BCN_OFFSET0, 0xf8f0e8e0 }, \
{ RT2860_LEGACY_BASIC_RATE, 0x0000013f }, \
{ RT2860_HT_BASIC_RATE, 0x00008003 }, \
{ RT2860_MAC_SYS_CTRL, 0x00000000 }, \
{ RT2860_BKOFF_SLOT_CFG, 0x00000209 }, \
{ RT2860_TX_SW_CFG0, 0x00000000 }, \
{ RT2860_TX_SW_CFG1, 0x00080606 }, \
{ RT2860_TX_LINK_CFG, 0x00001020 }, \
{ RT2860_TX_TIMEOUT_CFG, 0x000a2090 }, \
{ RT2860_LED_CFG, 0x7f031e46 }, \
{ RT2860_WMM_AIFSN_CFG, 0x00002273 }, \
{ RT2860_WMM_CWMIN_CFG, 0x00002344 }, \
{ RT2860_WMM_CWMAX_CFG, 0x000034aa }, \
{ RT2860_MAX_PCNT, 0x1f3fbf9f }, \
{ RT2860_TX_RTY_CFG, 0x47d01f0f }, \
{ RT2860_AUTO_RSP_CFG, 0x00000013 }, \
{ RT2860_CCK_PROT_CFG, 0x05740003 }, \
{ RT2860_OFDM_PROT_CFG, 0x05740003 }, \
{ RT2860_GF20_PROT_CFG, 0x01744004 }, \
{ RT2860_GF40_PROT_CFG, 0x03f44084 }, \
{ RT2860_MM20_PROT_CFG, 0x01744004 }, \
{ RT2860_MM40_PROT_CFG, 0x03f54084 }, \
{ RT2860_TXOP_CTRL_CFG, 0x0000583f }, \
{ RT2860_TXOP_HLDR_ET, 0x00000002 }, \
{ RT2860_TX_RTS_CFG, 0x00092b20 }, \
{ RT2860_EXP_ACK_TIME, 0x002400ca }, \
{ RT2860_XIFS_TIME_CFG, 0x33a41010 }, \
{ RT2860_PWR_PIN_CFG, 0x00000003 }
/* XXX only a few registers differ from above, try to merge? */
#define RT2870_DEF_MAC \
{ RT2860_BCN_OFFSET0, 0xf8f0e8e0 }, \
{ RT2860_LEGACY_BASIC_RATE, 0x0000013f }, \
{ RT2860_HT_BASIC_RATE, 0x00008003 }, \
{ RT2860_MAC_SYS_CTRL, 0x00000000 }, \
{ RT2860_BKOFF_SLOT_CFG, 0x00000209 }, \
{ RT2860_TX_SW_CFG0, 0x00000000 }, \
{ RT2860_TX_SW_CFG1, 0x00080606 }, \
{ RT2860_TX_LINK_CFG, 0x00001020 }, \
{ RT2860_TX_TIMEOUT_CFG, 0x000a2090 }, \
{ RT2860_LED_CFG, 0x7f031e46 }, \
{ RT2860_WMM_AIFSN_CFG, 0x00002273 }, \
{ RT2860_WMM_CWMIN_CFG, 0x00002344 }, \
{ RT2860_WMM_CWMAX_CFG, 0x000034aa }, \
{ RT2860_MAX_PCNT, 0x1f3fbf9f }, \
{ RT2860_TX_RTY_CFG, 0x47d01f0f }, \
{ RT2860_AUTO_RSP_CFG, 0x00000013 }, \
{ RT2860_CCK_PROT_CFG, 0x05740003 }, \
{ RT2860_OFDM_PROT_CFG, 0x05740003 }, \
{ RT2860_PBF_CFG, 0x00f40006 }, \
{ RT2860_WPDMA_GLO_CFG, 0x00000030 }, \
{ RT2860_GF20_PROT_CFG, 0x01744004 }, \
{ RT2860_GF40_PROT_CFG, 0x03f44084 }, \
{ RT2860_MM20_PROT_CFG, 0x01744004 }, \
{ RT2860_MM40_PROT_CFG, 0x03f44084 }, \
{ RT2860_TXOP_CTRL_CFG, 0x0000583f }, \
{ RT2860_TXOP_HLDR_ET, 0x00000002 }, \
{ RT2860_TX_RTS_CFG, 0x00092b20 }, \
{ RT2860_EXP_ACK_TIME, 0x002400ca }, \
{ RT2860_XIFS_TIME_CFG, 0x33a41010 }, \
{ RT2860_PWR_PIN_CFG, 0x00000003 }
/*
* Default values for BBP registers; values taken from the reference driver.
*/
#define RT2860_DEF_BBP \
{ 65, 0x2c }, \
{ 66, 0x38 }, \
{ 69, 0x12 }, \
{ 70, 0x0a }, \
{ 73, 0x10 }, \
{ 81, 0x37 }, \
{ 82, 0x62 }, \
{ 83, 0x6a }, \
{ 84, 0x99 }, \
{ 86, 0x00 }, \
{ 91, 0x04 }, \
{ 92, 0x00 }, \
{ 103, 0x00 }, \
{ 105, 0x05 }, \
{ 106, 0x35 }
/*
* Default settings for RF registers; values derived from the reference driver.
*/
#define RT2860_RF2850 \
{ 1, 0x100bb3, 0x1301e1, 0x05a014, 0x001402 }, \
{ 2, 0x100bb3, 0x1301e1, 0x05a014, 0x001407 }, \
{ 3, 0x100bb3, 0x1301e2, 0x05a014, 0x001402 }, \
{ 4, 0x100bb3, 0x1301e2, 0x05a014, 0x001407 }, \
{ 5, 0x100bb3, 0x1301e3, 0x05a014, 0x001402 }, \
{ 6, 0x100bb3, 0x1301e3, 0x05a014, 0x001407 }, \
{ 7, 0x100bb3, 0x1301e4, 0x05a014, 0x001402 }, \
{ 8, 0x100bb3, 0x1301e4, 0x05a014, 0x001407 }, \
{ 9, 0x100bb3, 0x1301e5, 0x05a014, 0x001402 }, \
{ 10, 0x100bb3, 0x1301e5, 0x05a014, 0x001407 }, \
{ 11, 0x100bb3, 0x1301e6, 0x05a014, 0x001402 }, \
{ 12, 0x100bb3, 0x1301e6, 0x05a014, 0x001407 }, \
{ 13, 0x100bb3, 0x1301e7, 0x05a014, 0x001402 }, \
{ 14, 0x100bb3, 0x1301e8, 0x05a014, 0x001404 }, \
{ 36, 0x100bb3, 0x130266, 0x056014, 0x001408 }, \
{ 38, 0x100bb3, 0x130267, 0x056014, 0x001404 }, \
{ 40, 0x100bb2, 0x1301a0, 0x056014, 0x001400 }, \
{ 44, 0x100bb2, 0x1301a0, 0x056014, 0x001408 }, \
{ 46, 0x100bb2, 0x1301a1, 0x056014, 0x001402 }, \
{ 48, 0x100bb2, 0x1301a1, 0x056014, 0x001406 }, \
{ 52, 0x100bb2, 0x1301a2, 0x056014, 0x001404 }, \
{ 54, 0x100bb2, 0x1301a2, 0x056014, 0x001408 }, \
{ 56, 0x100bb2, 0x1301a3, 0x056014, 0x001402 }, \
{ 60, 0x100bb2, 0x1301a4, 0x056014, 0x001400 }, \
{ 62, 0x100bb2, 0x1301a4, 0x056014, 0x001404 }, \
{ 64, 0x100bb2, 0x1301a4, 0x056014, 0x001408 }, \
{ 100, 0x100bb2, 0x1301ac, 0x05e014, 0x001400 }, \
{ 102, 0x100bb2, 0x1701ac, 0x15e014, 0x001404 }, \
{ 104, 0x100bb2, 0x1701ac, 0x15e014, 0x001408 }, \
{ 108, 0x100bb3, 0x17028c, 0x15e014, 0x001404 }, \
{ 110, 0x100bb3, 0x13028d, 0x05e014, 0x001400 }, \
{ 112, 0x100bb3, 0x13028d, 0x05e014, 0x001406 }, \
{ 116, 0x100bb3, 0x13028e, 0x05e014, 0x001408 }, \
{ 118, 0x100bb3, 0x13028f, 0x05e014, 0x001404 }, \
{ 120, 0x100bb1, 0x1300e0, 0x05e014, 0x001400 }, \
{ 124, 0x100bb1, 0x1300e0, 0x05e014, 0x001404 }, \
{ 126, 0x100bb1, 0x1300e0, 0x05e014, 0x001406 }, \
{ 128, 0x100bb1, 0x1300e0, 0x05e014, 0x001408 }, \
{ 132, 0x100bb1, 0x1300e1, 0x05e014, 0x001402 }, \
{ 134, 0x100bb1, 0x1300e1, 0x05e014, 0x001404 }, \
{ 136, 0x100bb1, 0x1300e1, 0x05e014, 0x001406 }, \
{ 140, 0x100bb1, 0x1300e2, 0x05e014, 0x001400 }, \
{ 149, 0x100bb1, 0x1300e2, 0x05e014, 0x001409 }, \
{ 151, 0x100bb1, 0x1300e3, 0x05e014, 0x001401 }, \
{ 153, 0x100bb1, 0x1300e3, 0x05e014, 0x001403 }, \
{ 157, 0x100bb1, 0x1300e3, 0x05e014, 0x001407 }, \
{ 159, 0x100bb1, 0x1300e3, 0x05e014, 0x001409 }, \
{ 161, 0x100bb1, 0x1300e4, 0x05e014, 0x001401 }, \
{ 165, 0x100bb1, 0x1300e4, 0x05e014, 0x001405 }, \
{ 167, 0x100bb1, 0x1300f4, 0x05e014, 0x001407 }, \
{ 169, 0x100bb1, 0x1300f4, 0x05e014, 0x001409 }, \
{ 171, 0x100bb1, 0x1300f5, 0x05e014, 0x001401 }, \
{ 173, 0x100bb1, 0x1300f5, 0x05e014, 0x001403 }
#define RT3070_RF3052 \
{ 0xf1, 2, 2 }, \
{ 0xf1, 2, 7 }, \
{ 0xf2, 2, 2 }, \
{ 0xf2, 2, 7 }, \
{ 0xf3, 2, 2 }, \
{ 0xf3, 2, 7 }, \
{ 0xf4, 2, 2 }, \
{ 0xf4, 2, 7 }, \
{ 0xf5, 2, 2 }, \
{ 0xf5, 2, 7 }, \
{ 0xf6, 2, 2 }, \
{ 0xf6, 2, 7 }, \
{ 0xf7, 2, 2 }, \
{ 0xf8, 2, 4 }, \
{ 0x56, 0, 4 }, \
{ 0x56, 0, 6 }, \
{ 0x56, 0, 8 }, \
{ 0x57, 0, 0 }, \
{ 0x57, 0, 2 }, \
{ 0x57, 0, 4 }, \
{ 0x57, 0, 8 }, \
{ 0x57, 0, 10 }, \
{ 0x58, 0, 0 }, \
{ 0x58, 0, 4 }, \
{ 0x58, 0, 6 }, \
{ 0x58, 0, 8 }, \
{ 0x5b, 0, 8 }, \
{ 0x5b, 0, 10 }, \
{ 0x5c, 0, 0 }, \
{ 0x5c, 0, 4 }, \
{ 0x5c, 0, 6 }, \
{ 0x5c, 0, 8 }, \
{ 0x5d, 0, 0 }, \
{ 0x5d, 0, 2 }, \
{ 0x5d, 0, 4 }, \
{ 0x5d, 0, 8 }, \
{ 0x5d, 0, 10 }, \
{ 0x5e, 0, 0 }, \
{ 0x5e, 0, 4 }, \
{ 0x5e, 0, 6 }, \
{ 0x5e, 0, 8 }, \
{ 0x5f, 0, 0 }, \
{ 0x5f, 0, 9 }, \
{ 0x5f, 0, 11 }, \
{ 0x60, 0, 1 }, \
{ 0x60, 0, 5 }, \
{ 0x60, 0, 7 }, \
{ 0x60, 0, 9 }, \
{ 0x61, 0, 1 }, \
{ 0x61, 0, 3 }, \
{ 0x61, 0, 5 }, \
{ 0x61, 0, 7 }, \
{ 0x61, 0, 9 }
#define RT3070_DEF_RF \
{ 4, 0x40 }, \
{ 5, 0x03 }, \
{ 6, 0x02 }, \
{ 7, 0x70 }, \
{ 9, 0x0f }, \
{ 10, 0x41 }, \
{ 11, 0x21 }, \
{ 12, 0x7b }, \
{ 14, 0x90 }, \
{ 15, 0x58 }, \
{ 16, 0xb3 }, \
{ 17, 0x92 }, \
{ 18, 0x2c }, \
{ 19, 0x02 }, \
{ 20, 0xba }, \
{ 21, 0xdb }, \
{ 24, 0x16 }, \
{ 25, 0x01 }, \
{ 29, 0x1f }
#define RT3572_DEF_RF \
{ 0, 0x70 }, \
{ 1, 0x81 }, \
{ 2, 0xf1 }, \
{ 3, 0x02 }, \
{ 4, 0x4c }, \
{ 5, 0x05 }, \
{ 6, 0x4a }, \
{ 7, 0xd8 }, \
{ 9, 0xc3 }, \
{ 10, 0xf1 }, \
{ 11, 0xb9 }, \
{ 12, 0x70 }, \
{ 13, 0x65 }, \
{ 14, 0xa0 }, \
{ 15, 0x53 }, \
{ 16, 0x4c }, \
{ 17, 0x23 }, \
{ 18, 0xac }, \
{ 19, 0x93 }, \
{ 20, 0xb3 }, \
{ 21, 0xd0 }, \
{ 22, 0x00 }, \
{ 23, 0x3c }, \
{ 24, 0x16 }, \
{ 25, 0x15 }, \
{ 26, 0x85 }, \
{ 27, 0x00 }, \
{ 28, 0x00 }, \
{ 29, 0x9b }, \
{ 30, 0x09 }, \
{ 31, 0x10 }
union run_stats {
uint32_t raw;
struct {
uint16_t fail;
uint16_t pad;
} error;
struct {
uint16_t success;
uint16_t retry;
} tx;
} __aligned(4);
#endif /* _IF_RUNREG_H_ */