d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
e6c006d96a
freebsd-dev/sys/arm/conf
History
Andrew Thompson 54873b4cd6 Add a GPIO driver for the Gateworks Cambria platform. 
The external gpio pins are connected to a PLD on the i2c bus, unfortunatley
this device does not conform by failing to send an ack after each byte written.
The iicbb driver will abort the transfer when the address is not ack'd and it
would introduce a lot of churn to be able to pass a flag down to
iicbb_start/iicbb_write. Instead we do bad things by grabbing the iicbus but
then doing our own bit banging.
2010-11-11 20:18:33 +00:00
..
.cvsignore
AVILA Hook up the five gpio pins on the Avila board to the gpio framework. There are 2010-11-07 20:33:39 +00:00
AVILA.hints Hook up the five gpio pins on the Avila board to the gpio framework. There are 2010-11-07 20:33:39 +00:00
BWCT Update the commented out option for omitting the sysctl descriptions; it 2010-02-24 19:28:15 +00:00
BWCT.hints add hint for at45d flash device sitting of spibus0 2010-11-11 15:02:14 +00:00
CAMBRIA Add a GPIO driver for the Gateworks Cambria platform. 2010-11-11 20:18:33 +00:00
CAMBRIA.hints Add a GPIO driver for the Gateworks Cambria platform. 2010-11-11 20:18:33 +00:00
CNS11XXNAS Adjust style (following the already existing rules) for the newly 2010-02-15 23:44:48 +00:00
CRB Adjust style (following the already existing rules) for the newly 2010-02-15 23:44:48 +00:00
DB-78XXX Convert Marvell ARM platforms to FDT convention. 2010-06-13 13:28:53 +00:00
DB-88F5XXX Convert Marvell ARM platforms to FDT convention. 2010-06-13 13:28:53 +00:00
DB-88F6XXX Convert Marvell ARM platforms to FDT convention. 2010-06-13 13:28:53 +00:00
DEFAULTS Revert 200594. This file isn't intended for these sorts of things. 2010-01-04 21:30:04 +00:00
DOCKSTAR Add custom kernel configuration and device tree source files for 2010-09-08 19:50:47 +00:00
EP80219 Adjust style (following the already existing rules) for the newly 2010-02-15 23:44:48 +00:00
GUMSTIX Adjust style (following the already existing rules) for the newly 2010-02-15 23:44:48 +00:00
GUMSTIX.hints Support for the XScale PXA255 SoC as found on the Gumstix Basix and Connex 2008-06-06 05:08:09 +00:00
HL200 Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had 2010-04-22 21:31:34 +00:00
HL201 Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201. 2010-07-14 00:48:53 +00:00
HL201.hints Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201. 2010-07-14 00:48:53 +00:00
IQ31244 Adjust style (following the already existing rules) for the newly 2010-02-15 23:44:48 +00:00
KB920X Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had 2010-04-22 21:31:34 +00:00
KB920X.hints
LN2410SBC Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had 2010-04-22 21:31:34 +00:00
NSLU Adjust style (following the already existing rules) for the newly 2010-02-15 23:44:48 +00:00
NSLU.hints Use the good hints for the NSLU, it should fix the network adapter. 2009-05-06 20:24:17 +00:00
QILA9G20 Add the QILA9G20 config files. 2010-10-06 22:41:32 +00:00
QILA9G20.hints Add the QILA9G20 config files. 2010-10-06 22:41:32 +00:00
SAM9G20EK Add the AT91SAM9G20EK config files. 2010-10-06 22:32:31 +00:00
SAM9G20EK.hints Add the AT91SAM9G20EK config files. 2010-10-06 22:32:31 +00:00
SHEEVAPLUG Convert Marvell ARM platforms to FDT convention. 2010-06-13 13:28:53 +00:00
SIMICS Add the options DEADLKRES (introducing the deadlock resolver thread) in 2010-02-10 16:30:04 +00:00
SKYEYE Adjust style (following the already existing rules) for the newly 2010-02-15 23:44:48 +00:00