d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
e6e7584dcd
freebsd-dev/sys/dev/asr/asr.c
Dimitry Andric 489b51d2e5 Replace homegrown list implementation in sys/dev/asr/asr.c with 
STAILQ().  While here, fix another clang warning about a switch which
tests an enum type for a regular integer value.

Submitted by:	jhb
MFC after:	1 week
2012-04-20 21:17:33 +00:00

3839 lines
109 KiB
C
Raw Blame History

/*-
* Copyright (c) 1996-2000 Distributed Processing Technology Corporation
* Copyright (c) 2000-2001 Adaptec Corporation
* All rights reserved.
*
* TERMS AND CONDITIONS OF USE
*
* Redistribution and use in source form, with or without modification, are
* permitted provided that redistributions of source code must retain the
* above copyright notice, this list of conditions and the following disclaimer.
*
* This software is provided `as is' by Adaptec and any express or implied
* warranties, including, but not limited to, the implied warranties of
* merchantability and fitness for a particular purpose, are disclaimed. In no
* event shall Adaptec be liable for any direct, indirect, incidental, special,
* exemplary or consequential damages (including, but not limited to,
* procurement of substitute goods or services; loss of use, data, or profits;
* or business interruptions) however caused and on any theory of liability,
* whether in contract, strict liability, or tort (including negligence or
* otherwise) arising in any way out of the use of this driver software, even
* if advised of the possibility of such damage.
*
* SCSI I2O host adapter driver
*
* V1.10 2004/05/05 scottl@freebsd.org
* - Massive cleanup of the driver to remove dead code and
* non-conformant style.
* - Removed most i386-specific code to make it more portable.
* - Converted to the bus_space API.
* V1.08 2001/08/21 Mark_Salyzyn@adaptec.com
* - The 2000S and 2005S do not initialize on some machines,
* increased timeout to 255ms from 50ms for the StatusGet
* command.
* V1.07 2001/05/22 Mark_Salyzyn@adaptec.com
* - I knew this one was too good to be true. The error return
* on ioctl commands needs to be compared to CAM_REQ_CMP, not
* to the bit masked status.
* V1.06 2001/05/08 Mark_Salyzyn@adaptec.com
* - The 2005S that was supported is affectionately called the
* Conjoined BAR Firmware. In order to support RAID-5 in a
* 16MB low-cost configuration, Firmware was forced to go
* to a Split BAR Firmware. This requires a separate IOP and
* Messaging base address.
* V1.05 2001/04/25 Mark_Salyzyn@adaptec.com
* - Handle support for 2005S Zero Channel RAID solution.
* - System locked up if the Adapter locked up. Do not try
* to send other commands if the resetIOP command fails. The
* fail outstanding command discovery loop was flawed as the
* removal of the command from the list prevented discovering
* all the commands.
* - Comment changes to clarify driver.
* - SysInfo searched for an EATA SmartROM, not an I2O SmartROM.
* - We do not use the AC_FOUND_DEV event because of I2O.
* Removed asr_async.
* V1.04 2000/09/22 Mark_Salyzyn@adaptec.com, msmith@freebsd.org,
* lampa@fee.vutbr.cz and Scott_Long@adaptec.com.
* - Removed support for PM1554, PM2554 and PM2654 in Mode-0
* mode as this is confused with competitor adapters in run
* mode.
* - critical locking needed in ASR_ccbAdd and ASR_ccbRemove
* to prevent operating system panic.
* - moved default major number to 154 from 97.
* V1.03 2000/07/12 Mark_Salyzyn@adaptec.com
* - The controller is not actually an ASR (Adaptec SCSI RAID)
* series that is visible, it's more of an internal code name.
* remove any visible references within reason for now.
* - bus_ptr->LUN was not correctly zeroed when initially
* allocated causing a possible panic of the operating system
* during boot.
* V1.02 2000/06/26 Mark_Salyzyn@adaptec.com
* - Code always fails for ASR_getTid affecting performance.
* - initiated a set of changes that resulted from a formal
* code inspection by Mark_Salyzyn@adaptec.com,
* George_Dake@adaptec.com, Jeff_Zeak@adaptec.com,
* Martin_Wilson@adaptec.com and Vincent_Trandoan@adaptec.com.
* Their findings were focussed on the LCT & TID handler, and
* all resulting changes were to improve code readability,
* consistency or have a positive effect on performance.
* V1.01 2000/06/14 Mark_Salyzyn@adaptec.com
* - Passthrough returned an incorrect error.
* - Passthrough did not migrate the intrinsic scsi layer wakeup
* on command completion.
* - generate control device nodes using make_dev and delete_dev.
* - Performance affected by TID caching reallocing.
* - Made suggested changes by Justin_Gibbs@adaptec.com
* - use splcam instead of splbio.
* - use cam_imask instead of bio_imask.
* - use u_int8_t instead of u_char.
* - use u_int16_t instead of u_short.
* - use u_int32_t instead of u_long where appropriate.
* - use 64 bit context handler instead of 32 bit.
* - create_ccb should only allocate the worst case
* requirements for the driver since CAM may evolve
* making union ccb much larger than needed here.
* renamed create_ccb to asr_alloc_ccb.
* - go nutz justifying all debug prints as macros
* defined at the top and remove unsightly ifdefs.
* - INLINE STATIC viewed as confusing. Historically
* utilized to affect code performance and debug
* issues in OS, Compiler or OEM specific situations.
* V1.00 2000/05/31 Mark_Salyzyn@adaptec.com
* - Ported from FreeBSD 2.2.X DPT I2O driver.
* changed struct scsi_xfer to union ccb/struct ccb_hdr
* changed variable name xs to ccb
* changed struct scsi_link to struct cam_path
* changed struct scsibus_data to struct cam_sim
* stopped using fordriver for holding on to the TID
* use proprietary packet creation instead of scsi_inquire
* CAM layer sends synchronize commands.
*/
#include <sys/cdefs.h>
#include <sys/param.h> /* TRUE=1 and FALSE=0 defined here */
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/conf.h>
#include <sys/ioccom.h>
#include <sys/priv.h>
#include <sys/proc.h>
#include <sys/bus.h>
#include <machine/resource.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <sys/stat.h>
#include <sys/bus_dma.h>
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/cam_sim.h>
#include <cam/cam_xpt_sim.h>
#include <cam/scsi/scsi_all.h>
#include <cam/scsi/scsi_message.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#if defined(__i386__)
#include "opt_asr.h"
#include <i386/include/cputypes.h>
#if defined(ASR_COMPAT)
#define ASR_IOCTL_COMPAT
#endif /* ASR_COMPAT */
#endif
#include <machine/vmparam.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
#define osdSwap4(x) ((u_long)ntohl((u_long)(x)))
#define KVTOPHYS(x) vtophys(x)
#include <dev/asr/dptalign.h>
#include <dev/asr/i2oexec.h>
#include <dev/asr/i2obscsi.h>
#include <dev/asr/i2odpt.h>
#include <dev/asr/i2oadptr.h>
#include <dev/asr/sys_info.h>
__FBSDID("$FreeBSD$");
#define ASR_VERSION 1
#define ASR_REVISION '1'
#define ASR_SUBREVISION '0'
#define ASR_MONTH 5
#define ASR_DAY 5
#define ASR_YEAR (2004 - 1980)
/*
* Debug macros to reduce the unsightly ifdefs
*/
#if (defined(DEBUG_ASR) || defined(DEBUG_ASR_USR_CMD) || defined(DEBUG_ASR_CMD))
static __inline void
debug_asr_message(PI2O_MESSAGE_FRAME message)
{
u_int32_t * pointer = (u_int32_t *)message;
u_int32_t length = I2O_MESSAGE_FRAME_getMessageSize(message);
u_int32_t counter = 0;
while (length--) {
printf("%08lx%c", (u_long)*(pointer++),
(((++counter & 7) == 0) || (length == 0)) ? '\n' : ' ');
}
}
#endif /* DEBUG_ASR || DEBUG_ASR_USR_CMD || DEBUG_ASR_CMD */
#ifdef DEBUG_ASR
/* Breaks on none STDC based compilers :-( */
#define debug_asr_printf(fmt,args...) printf(fmt, ##args)
#define debug_asr_dump_message(message) debug_asr_message(message)
#define debug_asr_print_path(ccb) xpt_print_path(ccb->ccb_h.path);
#else /* DEBUG_ASR */
#define debug_asr_printf(fmt,args...)
#define debug_asr_dump_message(message)
#define debug_asr_print_path(ccb)
#endif /* DEBUG_ASR */
/*
* If DEBUG_ASR_CMD is defined:
* 0 - Display incoming SCSI commands
* 1 - add in a quick character before queueing.
* 2 - add in outgoing message frames.
*/
#if (defined(DEBUG_ASR_CMD))
#define debug_asr_cmd_printf(fmt,args...) printf(fmt,##args)
static __inline void
debug_asr_dump_ccb(union ccb *ccb)
{
u_int8_t *cp = (unsigned char *)&(ccb->csio.cdb_io);
int len = ccb->csio.cdb_len;
while (len) {
debug_asr_cmd_printf (" %02x", *(cp++));
--len;
}
}
#if (DEBUG_ASR_CMD > 0)
#define debug_asr_cmd1_printf debug_asr_cmd_printf
#else
#define debug_asr_cmd1_printf(fmt,args...)
#endif
#if (DEBUG_ASR_CMD > 1)
#define debug_asr_cmd2_printf debug_asr_cmd_printf
#define debug_asr_cmd2_dump_message(message) debug_asr_message(message)
#else
#define debug_asr_cmd2_printf(fmt,args...)
#define debug_asr_cmd2_dump_message(message)
#endif
#else /* DEBUG_ASR_CMD */
#define debug_asr_cmd_printf(fmt,args...)
#define debug_asr_dump_ccb(ccb)
#define debug_asr_cmd1_printf(fmt,args...)
#define debug_asr_cmd2_printf(fmt,args...)
#define debug_asr_cmd2_dump_message(message)
#endif /* DEBUG_ASR_CMD */
#if (defined(DEBUG_ASR_USR_CMD))
#define debug_usr_cmd_printf(fmt,args...) printf(fmt,##args)
#define debug_usr_cmd_dump_message(message) debug_usr_message(message)
#else /* DEBUG_ASR_USR_CMD */
#define debug_usr_cmd_printf(fmt,args...)
#define debug_usr_cmd_dump_message(message)
#endif /* DEBUG_ASR_USR_CMD */
#ifdef ASR_IOCTL_COMPAT
#define dsDescription_size 46 /* Snug as a bug in a rug */
#endif /* ASR_IOCTL_COMPAT */
#include "dev/asr/dptsig.h"
static dpt_sig_S ASR_sig = {
{ 'd', 'P', 't', 'S', 'i', 'G'}, SIG_VERSION, PROC_INTEL,
PROC_386 | PROC_486 | PROC_PENTIUM | PROC_SEXIUM, FT_HBADRVR, 0,
OEM_DPT, OS_FREE_BSD, CAP_ABOVE16MB, DEV_ALL, ADF_ALL_SC5,
0, 0, ASR_VERSION, ASR_REVISION, ASR_SUBREVISION,
ASR_MONTH, ASR_DAY, ASR_YEAR,
/* 01234567890123456789012345678901234567890123456789 < 50 chars */
"Adaptec FreeBSD 4.0.0 Unix SCSI I2O HBA Driver"
/* ^^^^^ asr_attach alters these to match OS */
};
/* Configuration Definitions */
#define SG_SIZE 58 /* Scatter Gather list Size */
#define MAX_TARGET_ID 126 /* Maximum Target ID supported */
#define MAX_LUN 255 /* Maximum LUN Supported */
#define MAX_CHANNEL 7 /* Maximum Channel # Supported by driver */
#define MAX_INBOUND 2000 /* Max CCBs, Also Max Queue Size */
#define MAX_OUTBOUND 256 /* Maximum outbound frames/adapter */
#define MAX_INBOUND_SIZE 512 /* Maximum inbound frame size */
#define MAX_MAP 4194304L /* Maximum mapping size of IOP */
/* Also serves as the minimum map for */
/* the 2005S zero channel RAID product */
/* I2O register set */
#define I2O_REG_STATUS 0x30
#define I2O_REG_MASK 0x34
#define I2O_REG_TOFIFO 0x40
#define I2O_REG_FROMFIFO 0x44
#define Mask_InterruptsDisabled 0x08
/*
* A MIX of performance and space considerations for TID lookups
*/
typedef u_int16_t tid_t;
typedef struct {
u_int32_t size; /* up to MAX_LUN */
tid_t TID[1];
} lun2tid_t;
typedef struct {
u_int32_t size; /* up to MAX_TARGET */
lun2tid_t * LUN[1];
} target2lun_t;
/*
* To ensure that we only allocate and use the worst case ccb here, lets
* make our own local ccb union. If asr_alloc_ccb is utilized for another
* ccb type, ensure that you add the additional structures into our local
* ccb union. To ensure strict type checking, we will utilize the local
* ccb definition wherever possible.
*/
union asr_ccb {
struct ccb_hdr ccb_h; /* For convenience */
struct ccb_scsiio csio;
struct ccb_setasync csa;
};
struct Asr_status_mem {
I2O_EXEC_STATUS_GET_REPLY status;
U32 rstatus;
};
/**************************************************************************
** ASR Host Adapter structure - One Structure For Each Host Adapter That **
** Is Configured Into The System. The Structure Supplies Configuration **
** Information, Status Info, Queue Info And An Active CCB List Pointer. **
***************************************************************************/
typedef struct Asr_softc {
device_t ha_dev;
u_int16_t ha_irq;
u_long ha_Base; /* base port for each board */
bus_size_t ha_blinkLED;
bus_space_handle_t ha_i2o_bhandle;
bus_space_tag_t ha_i2o_btag;
bus_space_handle_t ha_frame_bhandle;
bus_space_tag_t ha_frame_btag;
I2O_IOP_ENTRY ha_SystemTable;
LIST_HEAD(,ccb_hdr) ha_ccb; /* ccbs in use */
bus_dma_tag_t ha_parent_dmat;
bus_dma_tag_t ha_statusmem_dmat;
bus_dmamap_t ha_statusmem_dmamap;
struct Asr_status_mem * ha_statusmem;
u_int32_t ha_rstatus_phys;
u_int32_t ha_status_phys;
struct cam_path * ha_path[MAX_CHANNEL+1];
struct cam_sim * ha_sim[MAX_CHANNEL+1];
struct resource * ha_mem_res;
struct resource * ha_mes_res;
struct resource * ha_irq_res;
void * ha_intr;
PI2O_LCT ha_LCT; /* Complete list of devices */
#define le_type IdentityTag[0]
#define I2O_BSA 0x20
#define I2O_FCA 0x40
#define I2O_SCSI 0x00
#define I2O_PORT 0x80
#define I2O_UNKNOWN 0x7F
#define le_bus IdentityTag[1]
#define le_target IdentityTag[2]
#define le_lun IdentityTag[3]
target2lun_t * ha_targets[MAX_CHANNEL+1];
PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME ha_Msgs;
u_long ha_Msgs_Phys;
u_int8_t ha_in_reset;
#define HA_OPERATIONAL 0
#define HA_IN_RESET 1
#define HA_OFF_LINE 2
#define HA_OFF_LINE_RECOVERY 3
/* Configuration information */
/* The target id maximums we take */
u_int8_t ha_MaxBus; /* Maximum bus */
u_int8_t ha_MaxId; /* Maximum target ID */
u_int8_t ha_MaxLun; /* Maximum target LUN */
u_int8_t ha_SgSize; /* Max SG elements */
u_int8_t ha_pciBusNum;
u_int8_t ha_pciDeviceNum;
u_int8_t ha_adapter_target[MAX_CHANNEL+1];
u_int16_t ha_QueueSize; /* Max outstanding commands */
u_int16_t ha_Msgs_Count;
/* Links into other parents and HBAs */
STAILQ_ENTRY(Asr_softc) ha_next; /* HBA list */
struct cdev *ha_devt;
} Asr_softc_t;
static STAILQ_HEAD(, Asr_softc) Asr_softc_list =
STAILQ_HEAD_INITIALIZER(Asr_softc_list);
/*
* Prototypes of the routines we have in this object.
*/
/* I2O HDM interface */
static int asr_probe(device_t dev);
static int asr_attach(device_t dev);
static int asr_ioctl(struct cdev *dev, u_long cmd, caddr_t data, int flag,
struct thread *td);
static int asr_open(struct cdev *dev, int32_t flags, int32_t ifmt,
struct thread *td);
static int asr_close(struct cdev *dev, int flags, int ifmt, struct thread *td);
static int asr_intr(Asr_softc_t *sc);
static void asr_timeout(void *arg);
static int ASR_init(Asr_softc_t *sc);
static int ASR_acquireLct(Asr_softc_t *sc);
static int ASR_acquireHrt(Asr_softc_t *sc);
static void asr_action(struct cam_sim *sim, union ccb *ccb);
static void asr_poll(struct cam_sim *sim);
static int ASR_queue(Asr_softc_t *sc, PI2O_MESSAGE_FRAME Message);
/*
* Here is the auto-probe structure used to nest our tests appropriately
* during the startup phase of the operating system.
*/
static device_method_t asr_methods[] = {
DEVMETHOD(device_probe, asr_probe),
DEVMETHOD(device_attach, asr_attach),
{ 0, 0 }
};
static driver_t asr_driver = {
"asr",
asr_methods,
sizeof(Asr_softc_t)
};
static devclass_t asr_devclass;
DRIVER_MODULE(asr, pci, asr_driver, asr_devclass, 0, 0);
MODULE_DEPEND(asr, pci, 1, 1, 1);
MODULE_DEPEND(asr, cam, 1, 1, 1);
/*
* devsw for asr hba driver
*
* only ioctl is used. the sd driver provides all other access.
*/
static struct cdevsw asr_cdevsw = {
.d_version = D_VERSION,
.d_flags = D_NEEDGIANT,
.d_open = asr_open,
.d_close = asr_close,
.d_ioctl = asr_ioctl,
.d_name = "asr",
};
/* I2O support routines */
static __inline u_int32_t
asr_get_FromFIFO(Asr_softc_t *sc)
{
return (bus_space_read_4(sc->ha_i2o_btag, sc->ha_i2o_bhandle,
I2O_REG_FROMFIFO));
}
static __inline u_int32_t
asr_get_ToFIFO(Asr_softc_t *sc)
{
return (bus_space_read_4(sc->ha_i2o_btag, sc->ha_i2o_bhandle,
I2O_REG_TOFIFO));
}
static __inline u_int32_t
asr_get_intr(Asr_softc_t *sc)
{
return (bus_space_read_4(sc->ha_i2o_btag, sc->ha_i2o_bhandle,
I2O_REG_MASK));
}
static __inline u_int32_t
asr_get_status(Asr_softc_t *sc)
{
return (bus_space_read_4(sc->ha_i2o_btag, sc->ha_i2o_bhandle,
I2O_REG_STATUS));
}
static __inline void
asr_set_FromFIFO(Asr_softc_t *sc, u_int32_t val)
{
bus_space_write_4(sc->ha_i2o_btag, sc->ha_i2o_bhandle, I2O_REG_FROMFIFO,
val);
}
static __inline void
asr_set_ToFIFO(Asr_softc_t *sc, u_int32_t val)
{
bus_space_write_4(sc->ha_i2o_btag, sc->ha_i2o_bhandle, I2O_REG_TOFIFO,
val);
}
static __inline void
asr_set_intr(Asr_softc_t *sc, u_int32_t val)
{
bus_space_write_4(sc->ha_i2o_btag, sc->ha_i2o_bhandle, I2O_REG_MASK,
val);
}
static __inline void
asr_set_frame(Asr_softc_t *sc, void *frame, u_int32_t offset, int len)
{
bus_space_write_region_4(sc->ha_frame_btag, sc->ha_frame_bhandle,
offset, (u_int32_t *)frame, len);
}
/*
* Fill message with default.
*/
static PI2O_MESSAGE_FRAME
ASR_fillMessage(void *Message, u_int16_t size)
{
PI2O_MESSAGE_FRAME Message_Ptr;
Message_Ptr = (I2O_MESSAGE_FRAME *)Message;
bzero(Message_Ptr, size);
I2O_MESSAGE_FRAME_setVersionOffset(Message_Ptr, I2O_VERSION_11);
I2O_MESSAGE_FRAME_setMessageSize(Message_Ptr,
(size + sizeof(U32) - 1) >> 2);
I2O_MESSAGE_FRAME_setInitiatorAddress (Message_Ptr, 1);
KASSERT(Message_Ptr != NULL, ("Message_Ptr == NULL"));
return (Message_Ptr);
} /* ASR_fillMessage */
#define EMPTY_QUEUE (0xffffffff)
static __inline U32
ASR_getMessage(Asr_softc_t *sc)
{
U32 MessageOffset;
MessageOffset = asr_get_ToFIFO(sc);
if (MessageOffset == EMPTY_QUEUE)
MessageOffset = asr_get_ToFIFO(sc);
return (MessageOffset);
} /* ASR_getMessage */
/* Issue a polled command */
static U32
ASR_initiateCp(Asr_softc_t *sc, PI2O_MESSAGE_FRAME Message)
{
U32 Mask = 0xffffffff;
U32 MessageOffset;
u_int Delay = 1500;
/*
* ASR_initiateCp is only used for synchronous commands and will
* be made more resiliant to adapter delays since commands like
* resetIOP can cause the adapter to be deaf for a little time.
*/
while (((MessageOffset = ASR_getMessage(sc)) == EMPTY_QUEUE)
&& (--Delay != 0)) {
DELAY (10000);
}
if (MessageOffset != EMPTY_QUEUE) {
asr_set_frame(sc, Message, MessageOffset,
I2O_MESSAGE_FRAME_getMessageSize(Message));
/*
* Disable the Interrupts
*/
Mask = asr_get_intr(sc);
asr_set_intr(sc, Mask | Mask_InterruptsDisabled);
asr_set_ToFIFO(sc, MessageOffset);
}
return (Mask);
} /* ASR_initiateCp */
/*
* Reset the adapter.
*/
static U32
ASR_resetIOP(Asr_softc_t *sc)
{
I2O_EXEC_IOP_RESET_MESSAGE Message;
PI2O_EXEC_IOP_RESET_MESSAGE Message_Ptr;
U32 * Reply_Ptr;
U32 Old;
/*
* Build up our copy of the Message.
*/
Message_Ptr = (PI2O_EXEC_IOP_RESET_MESSAGE)ASR_fillMessage(&Message,
sizeof(I2O_EXEC_IOP_RESET_MESSAGE));
I2O_EXEC_IOP_RESET_MESSAGE_setFunction(Message_Ptr, I2O_EXEC_IOP_RESET);
/*
* Reset the Reply Status
*/
Reply_Ptr = &sc->ha_statusmem->rstatus;
*Reply_Ptr = 0;
I2O_EXEC_IOP_RESET_MESSAGE_setStatusWordLowAddress(Message_Ptr,
sc->ha_rstatus_phys);
/*
* Send the Message out
*/
if ((Old = ASR_initiateCp(sc, (PI2O_MESSAGE_FRAME)Message_Ptr)) !=
0xffffffff) {
/*
* Wait for a response (Poll), timeouts are dangerous if
* the card is truly responsive. We assume response in 2s.
*/
u_int8_t Delay = 200;
while ((*Reply_Ptr == 0) && (--Delay != 0)) {
DELAY (10000);
}
/*
* Re-enable the interrupts.
*/
asr_set_intr(sc, Old);
KASSERT(*Reply_Ptr != 0, ("*Reply_Ptr == 0"));
return(*Reply_Ptr);
}
KASSERT(Old != 0xffffffff, ("Old == -1"));
return (0);
} /* ASR_resetIOP */
/*
* Get the curent state of the adapter
*/
static PI2O_EXEC_STATUS_GET_REPLY
ASR_getStatus(Asr_softc_t *sc)
{
I2O_EXEC_STATUS_GET_MESSAGE Message;
PI2O_EXEC_STATUS_GET_MESSAGE Message_Ptr;
PI2O_EXEC_STATUS_GET_REPLY buffer;
U32 Old;
/*
* Build up our copy of the Message.
*/
Message_Ptr = (PI2O_EXEC_STATUS_GET_MESSAGE)ASR_fillMessage(&Message,
sizeof(I2O_EXEC_STATUS_GET_MESSAGE));
I2O_EXEC_STATUS_GET_MESSAGE_setFunction(Message_Ptr,
I2O_EXEC_STATUS_GET);
I2O_EXEC_STATUS_GET_MESSAGE_setReplyBufferAddressLow(Message_Ptr,
sc->ha_status_phys);
/* This one is a Byte Count */
I2O_EXEC_STATUS_GET_MESSAGE_setReplyBufferLength(Message_Ptr,
sizeof(I2O_EXEC_STATUS_GET_REPLY));
/*
* Reset the Reply Status
*/
buffer = &sc->ha_statusmem->status;
bzero(buffer, sizeof(I2O_EXEC_STATUS_GET_REPLY));
/*
* Send the Message out
*/
if ((Old = ASR_initiateCp(sc, (PI2O_MESSAGE_FRAME)Message_Ptr)) !=
0xffffffff) {
/*
* Wait for a response (Poll), timeouts are dangerous if
* the card is truly responsive. We assume response in 50ms.
*/
u_int8_t Delay = 255;
while (*((U8 * volatile)&(buffer->SyncByte)) == 0) {
if (--Delay == 0) {
buffer = NULL;
break;
}
DELAY (1000);
}
/*
* Re-enable the interrupts.
*/
asr_set_intr(sc, Old);
return (buffer);
}
return (NULL);
} /* ASR_getStatus */
/*
* Check if the device is a SCSI I2O HBA, and add it to the list.
*/
/*
* Probe for ASR controller. If we find it, we will use it.
* virtual adapters.
*/
static int
asr_probe(device_t dev)
{
u_int32_t id;
id = (pci_get_device(dev) << 16) | pci_get_vendor(dev);
if ((id == 0xA5011044) || (id == 0xA5111044)) {
device_set_desc(dev, "Adaptec Caching SCSI RAID");
return (BUS_PROBE_DEFAULT);
}
return (ENXIO);
} /* asr_probe */
static __inline union asr_ccb *
asr_alloc_ccb(Asr_softc_t *sc)
{
union asr_ccb *new_ccb;
if ((new_ccb = (union asr_ccb *)malloc(sizeof(*new_ccb),
M_DEVBUF, M_WAITOK | M_ZERO)) != NULL) {
new_ccb->ccb_h.pinfo.priority = 1;
new_ccb->ccb_h.pinfo.index = CAM_UNQUEUED_INDEX;
new_ccb->ccb_h.spriv_ptr0 = sc;
}
return (new_ccb);
} /* asr_alloc_ccb */
static __inline void
asr_free_ccb(union asr_ccb *free_ccb)
{
free(free_ccb, M_DEVBUF);
} /* asr_free_ccb */
/*
* Print inquiry data `carefully'
*/
static void
ASR_prstring(u_int8_t *s, int len)
{
while ((--len >= 0) && (*s) && (*s != ' ') && (*s != '-')) {
printf ("%c", *(s++));
}
} /* ASR_prstring */
/*
* Send a message synchronously and without Interrupt to a ccb.
*/
static int
ASR_queue_s(union asr_ccb *ccb, PI2O_MESSAGE_FRAME Message)
{
int s;
U32 Mask;
Asr_softc_t *sc = (Asr_softc_t *)(ccb->ccb_h.spriv_ptr0);
/*
* We do not need any (optional byteswapping) method access to
* the Initiator context field.
*/
I2O_MESSAGE_FRAME_setInitiatorContext64(Message, (long)ccb);
/* Prevent interrupt service */
s = splcam ();
Mask = asr_get_intr(sc);
asr_set_intr(sc, Mask | Mask_InterruptsDisabled);
if (ASR_queue(sc, Message) == EMPTY_QUEUE) {
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_REQUEUE_REQ;
}
/*
* Wait for this board to report a finished instruction.
*/
while ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG) {
(void)asr_intr (sc);
}
/* Re-enable Interrupts */
asr_set_intr(sc, Mask);
splx(s);
return (ccb->ccb_h.status);
} /* ASR_queue_s */
/*
* Send a message synchronously to an Asr_softc_t.
*/
static int
ASR_queue_c(Asr_softc_t *sc, PI2O_MESSAGE_FRAME Message)
{
union asr_ccb *ccb;
int status;
if ((ccb = asr_alloc_ccb (sc)) == NULL) {
return (CAM_REQUEUE_REQ);
}
status = ASR_queue_s (ccb, Message);
asr_free_ccb(ccb);
return (status);
} /* ASR_queue_c */
/*
* Add the specified ccb to the active queue
*/
static __inline void
ASR_ccbAdd(Asr_softc_t *sc, union asr_ccb *ccb)
{
int s;
s = splcam();
LIST_INSERT_HEAD(&(sc->ha_ccb), &(ccb->ccb_h), sim_links.le);
if (ccb->ccb_h.timeout != CAM_TIME_INFINITY) {
if (ccb->ccb_h.timeout == CAM_TIME_DEFAULT) {
/*
* RAID systems can take considerable time to
* complete some commands given the large cache
* flashes switching from write back to write thru.
*/
ccb->ccb_h.timeout = 6 * 60 * 1000;
}
ccb->ccb_h.timeout_ch = timeout(asr_timeout, (caddr_t)ccb,
(ccb->ccb_h.timeout * hz) / 1000);
}
splx(s);
} /* ASR_ccbAdd */
/*
* Remove the specified ccb from the active queue.
*/
static __inline void
ASR_ccbRemove(Asr_softc_t *sc, union asr_ccb *ccb)
{
int s;
s = splcam();
untimeout(asr_timeout, (caddr_t)ccb, ccb->ccb_h.timeout_ch);
LIST_REMOVE(&(ccb->ccb_h), sim_links.le);
splx(s);
} /* ASR_ccbRemove */
/*
* Fail all the active commands, so they get re-issued by the operating
* system.
*/
static void
ASR_failActiveCommands(Asr_softc_t *sc)
{
struct ccb_hdr *ccb;
int s;
s = splcam();
/*
* We do not need to inform the CAM layer that we had a bus
* reset since we manage it on our own, this also prevents the
* SCSI_DELAY settling that would be required on other systems.
* The `SCSI_DELAY' has already been handled by the card via the
* acquisition of the LCT table while we are at CAM priority level.
* for (int bus = 0; bus <= sc->ha_MaxBus; ++bus) {
* xpt_async (AC_BUS_RESET, sc->ha_path[bus], NULL);
* }
*/
while ((ccb = LIST_FIRST(&(sc->ha_ccb))) != NULL) {
ASR_ccbRemove (sc, (union asr_ccb *)ccb);
ccb->status &= ~CAM_STATUS_MASK;
ccb->status |= CAM_REQUEUE_REQ;
/* Nothing Transfered */
((struct ccb_scsiio *)ccb)->resid
= ((struct ccb_scsiio *)ccb)->dxfer_len;
if (ccb->path) {
xpt_done ((union ccb *)ccb);
} else {
wakeup (ccb);
}
}
splx(s);
} /* ASR_failActiveCommands */
/*
* The following command causes the HBA to reset the specific bus
*/
static void
ASR_resetBus(Asr_softc_t *sc, int bus)
{
I2O_HBA_BUS_RESET_MESSAGE Message;
I2O_HBA_BUS_RESET_MESSAGE *Message_Ptr;
PI2O_LCT_ENTRY Device;
Message_Ptr = (I2O_HBA_BUS_RESET_MESSAGE *)ASR_fillMessage(&Message,
sizeof(I2O_HBA_BUS_RESET_MESSAGE));
I2O_MESSAGE_FRAME_setFunction(&Message_Ptr->StdMessageFrame,
I2O_HBA_BUS_RESET);
for (Device = sc->ha_LCT->LCTEntry; Device < (PI2O_LCT_ENTRY)
(((U32 *)sc->ha_LCT)+I2O_LCT_getTableSize(sc->ha_LCT));
++Device) {
if (((Device->le_type & I2O_PORT) != 0)
&& (Device->le_bus == bus)) {
I2O_MESSAGE_FRAME_setTargetAddress(
&Message_Ptr->StdMessageFrame,
I2O_LCT_ENTRY_getLocalTID(Device));
/* Asynchronous command, with no expectations */
(void)ASR_queue(sc, (PI2O_MESSAGE_FRAME)Message_Ptr);
break;
}
}
} /* ASR_resetBus */
static __inline int
ASR_getBlinkLedCode(Asr_softc_t *sc)
{
U8 blink;
if (sc == NULL)
return (0);
blink = bus_space_read_1(sc->ha_frame_btag,
sc->ha_frame_bhandle, sc->ha_blinkLED + 1);
if (blink != 0xBC)
return (0);
blink = bus_space_read_1(sc->ha_frame_btag,
sc->ha_frame_bhandle, sc->ha_blinkLED);
return (blink);
} /* ASR_getBlinkCode */
/*
* Determine the address of an TID lookup. Must be done at high priority
* since the address can be changed by other threads of execution.
*
* Returns NULL pointer if not indexible (but will attempt to generate
* an index if `new_entry' flag is set to TRUE).
*
* All addressible entries are to be guaranteed zero if never initialized.
*/
static tid_t *
ASR_getTidAddress(Asr_softc_t *sc, int bus, int target, int lun, int new_entry)
{
target2lun_t *bus_ptr;
lun2tid_t *target_ptr;
unsigned new_size;
/*
* Validity checking of incoming parameters. More of a bound
* expansion limit than an issue with the code dealing with the
* values.
*
* sc must be valid before it gets here, so that check could be
* dropped if speed a critical issue.
*/
if ((sc == NULL)
|| (bus > MAX_CHANNEL)
|| (target > sc->ha_MaxId)
|| (lun > sc->ha_MaxLun)) {
debug_asr_printf("(%lx,%d,%d,%d) target out of range\n",
(u_long)sc, bus, target, lun);
return (NULL);
}
/*
* See if there is an associated bus list.
*
* for performance, allocate in size of BUS_CHUNK chunks.
* BUS_CHUNK must be a power of two. This is to reduce
* fragmentation effects on the allocations.
*/
#define BUS_CHUNK 8
new_size = ((target + BUS_CHUNK - 1) & ~(BUS_CHUNK - 1));
if ((bus_ptr = sc->ha_targets[bus]) == NULL) {
/*
* Allocate a new structure?
* Since one element in structure, the +1
* needed for size has been abstracted.
*/
if ((new_entry == FALSE)
|| ((sc->ha_targets[bus] = bus_ptr = (target2lun_t *)malloc (
sizeof(*bus_ptr) + (sizeof(bus_ptr->LUN) * new_size),
M_TEMP, M_WAITOK | M_ZERO))
== NULL)) {
debug_asr_printf("failed to allocate bus list\n");
return (NULL);
}
bus_ptr->size = new_size + 1;
} else if (bus_ptr->size <= new_size) {
target2lun_t * new_bus_ptr;
/*
* Reallocate a new structure?
* Since one element in structure, the +1
* needed for size has been abstracted.
*/
if ((new_entry == FALSE)
|| ((new_bus_ptr = (target2lun_t *)malloc (
sizeof(*bus_ptr) + (sizeof(bus_ptr->LUN) * new_size),
M_TEMP, M_WAITOK | M_ZERO)) == NULL)) {
debug_asr_printf("failed to reallocate bus list\n");
return (NULL);
}
/*
* Copy the whole thing, safer, simpler coding
* and not really performance critical at this point.
*/
bcopy(bus_ptr, new_bus_ptr, sizeof(*bus_ptr)
+ (sizeof(bus_ptr->LUN) * (bus_ptr->size - 1)));
sc->ha_targets[bus] = new_bus_ptr;
free(bus_ptr, M_TEMP);
bus_ptr = new_bus_ptr;
bus_ptr->size = new_size + 1;
}
/*
* We now have the bus list, lets get to the target list.
* Since most systems have only *one* lun, we do not allocate
* in chunks as above, here we allow one, then in chunk sizes.
* TARGET_CHUNK must be a power of two. This is to reduce
* fragmentation effects on the allocations.
*/
#define TARGET_CHUNK 8
if ((new_size = lun) != 0) {
new_size = ((lun + TARGET_CHUNK - 1) & ~(TARGET_CHUNK - 1));
}
if ((target_ptr = bus_ptr->LUN[target]) == NULL) {
/*
* Allocate a new structure?
* Since one element in structure, the +1
* needed for size has been abstracted.
*/
if ((new_entry == FALSE)
|| ((bus_ptr->LUN[target] = target_ptr = (lun2tid_t *)malloc (
sizeof(*target_ptr) + (sizeof(target_ptr->TID) * new_size),
M_TEMP, M_WAITOK | M_ZERO)) == NULL)) {
debug_asr_printf("failed to allocate target list\n");
return (NULL);
}
target_ptr->size = new_size + 1;
} else if (target_ptr->size <= new_size) {
lun2tid_t * new_target_ptr;
/*
* Reallocate a new structure?
* Since one element in structure, the +1
* needed for size has been abstracted.
*/
if ((new_entry == FALSE)
|| ((new_target_ptr = (lun2tid_t *)malloc (
sizeof(*target_ptr) + (sizeof(target_ptr->TID) * new_size),
M_TEMP, M_WAITOK | M_ZERO)) == NULL)) {
debug_asr_printf("failed to reallocate target list\n");
return (NULL);
}
/*
* Copy the whole thing, safer, simpler coding
* and not really performance critical at this point.
*/
bcopy(target_ptr, new_target_ptr, sizeof(*target_ptr)
+ (sizeof(target_ptr->TID) * (target_ptr->size - 1)));
bus_ptr->LUN[target] = new_target_ptr;
free(target_ptr, M_TEMP);
target_ptr = new_target_ptr;
target_ptr->size = new_size + 1;
}
/*
* Now, acquire the TID address from the LUN indexed list.
*/
return (&(target_ptr->TID[lun]));
} /* ASR_getTidAddress */
/*
* Get a pre-existing TID relationship.
*
* If the TID was never set, return (tid_t)-1.
*
* should use mutex rather than spl.
*/
static __inline tid_t
ASR_getTid(Asr_softc_t *sc, int bus, int target, int lun)
{
tid_t *tid_ptr;
int s;
tid_t retval;
s = splcam();
if (((tid_ptr = ASR_getTidAddress(sc, bus, target, lun, FALSE)) == NULL)
/* (tid_t)0 or (tid_t)-1 indicate no TID */
|| (*tid_ptr == (tid_t)0)) {
splx(s);
return ((tid_t)-1);
}
retval = *tid_ptr;
splx(s);
return (retval);
} /* ASR_getTid */
/*
* Set a TID relationship.
*
* If the TID was not set, return (tid_t)-1.
*
* should use mutex rather than spl.
*/
static __inline tid_t
ASR_setTid(Asr_softc_t *sc, int bus, int target, int lun, tid_t TID)
{
tid_t *tid_ptr;
int s;
if (TID != (tid_t)-1) {
if (TID == 0) {
return ((tid_t)-1);
}
s = splcam();
if ((tid_ptr = ASR_getTidAddress(sc, bus, target, lun, TRUE))
== NULL) {
splx(s);
return ((tid_t)-1);
}
*tid_ptr = TID;
splx(s);
}
return (TID);
} /* ASR_setTid */
/*-------------------------------------------------------------------------*/
/* Function ASR_rescan */
/*-------------------------------------------------------------------------*/
/* The Parameters Passed To This Function Are : */
/* Asr_softc_t * : HBA miniport driver's adapter data storage. */
/* */
/* This Function Will rescan the adapter and resynchronize any data */
/* */
/* Return : 0 For OK, Error Code Otherwise */
/*-------------------------------------------------------------------------*/
static int
ASR_rescan(Asr_softc_t *sc)
{
int bus;
int error;
/*
* Re-acquire the LCT table and synchronize us to the adapter.
*/
if ((error = ASR_acquireLct(sc)) == 0) {
error = ASR_acquireHrt(sc);
}
if (error != 0) {
return error;
}
bus = sc->ha_MaxBus;
/* Reset all existing cached TID lookups */
do {
int target, event = 0;
/*
* Scan for all targets on this bus to see if they
* got affected by the rescan.
*/
for (target = 0; target <= sc->ha_MaxId; ++target) {
int lun;
/* Stay away from the controller ID */
if (target == sc->ha_adapter_target[bus]) {
continue;
}
for (lun = 0; lun <= sc->ha_MaxLun; ++lun) {
PI2O_LCT_ENTRY Device;
tid_t TID = (tid_t)-1;
tid_t LastTID;
/*
* See if the cached TID changed. Search for
* the device in our new LCT.
*/
for (Device = sc->ha_LCT->LCTEntry;
Device < (PI2O_LCT_ENTRY)(((U32 *)sc->ha_LCT)
+ I2O_LCT_getTableSize(sc->ha_LCT));
++Device) {
if ((Device->le_type != I2O_UNKNOWN)
&& (Device->le_bus == bus)
&& (Device->le_target == target)
&& (Device->le_lun == lun)
&& (I2O_LCT_ENTRY_getUserTID(Device)
== 0xFFF)) {
TID = I2O_LCT_ENTRY_getLocalTID(
Device);
break;
}
}
/*
* Indicate to the OS that the label needs
* to be recalculated, or that the specific
* open device is no longer valid (Merde)
* because the cached TID changed.
*/
LastTID = ASR_getTid (sc, bus, target, lun);
if (LastTID != TID) {
struct cam_path * path;
if (xpt_create_path(&path,
/*periph*/NULL,
cam_sim_path(sc->ha_sim[bus]),
target, lun) != CAM_REQ_CMP) {
if (TID == (tid_t)-1) {
event |= AC_LOST_DEVICE;
} else {
event |= AC_INQ_CHANGED
| AC_GETDEV_CHANGED;
}
} else {
if (TID == (tid_t)-1) {
xpt_async(
AC_LOST_DEVICE,
path, NULL);
} else if (LastTID == (tid_t)-1) {
struct ccb_getdev ccb;
xpt_setup_ccb(
&(ccb.ccb_h),
path, /*priority*/5);
xpt_async(
AC_FOUND_DEVICE,
path,
&ccb);
} else {
xpt_async(
AC_INQ_CHANGED,
path, NULL);
xpt_async(
AC_GETDEV_CHANGED,
path, NULL);
}
}
}
/*
* We have the option of clearing the
* cached TID for it to be rescanned, or to
* set it now even if the device never got
* accessed. We chose the later since we
* currently do not use the condition that
* the TID ever got cached.
*/
ASR_setTid (sc, bus, target, lun, TID);
}
}
/*
* The xpt layer can not handle multiple events at the
* same call.
*/
if (event & AC_LOST_DEVICE) {
xpt_async(AC_LOST_DEVICE, sc->ha_path[bus], NULL);
}
if (event & AC_INQ_CHANGED) {
xpt_async(AC_INQ_CHANGED, sc->ha_path[bus], NULL);
}
if (event & AC_GETDEV_CHANGED) {
xpt_async(AC_GETDEV_CHANGED, sc->ha_path[bus], NULL);
}
} while (--bus >= 0);
return (error);
} /* ASR_rescan */
/*-------------------------------------------------------------------------*/
/* Function ASR_reset */
/*-------------------------------------------------------------------------*/
/* The Parameters Passed To This Function Are : */
/* Asr_softc_t * : HBA miniport driver's adapter data storage. */
/* */
/* This Function Will reset the adapter and resynchronize any data */
/* */
/* Return : None */
/*-------------------------------------------------------------------------*/
static int
ASR_reset(Asr_softc_t *sc)
{
int s, retVal;
s = splcam();
if ((sc->ha_in_reset == HA_IN_RESET)
|| (sc->ha_in_reset == HA_OFF_LINE_RECOVERY)) {
splx (s);
return (EBUSY);
}
/*
* Promotes HA_OPERATIONAL to HA_IN_RESET,
* or HA_OFF_LINE to HA_OFF_LINE_RECOVERY.
*/
++(sc->ha_in_reset);
if (ASR_resetIOP(sc) == 0) {
debug_asr_printf ("ASR_resetIOP failed\n");
/*
* We really need to take this card off-line, easier said
* than make sense. Better to keep retrying for now since if a
* UART cable is connected the blinkLEDs the adapter is now in
* a hard state requiring action from the monitor commands to
* the HBA to continue. For debugging waiting forever is a
* good thing. In a production system, however, one may wish
* to instead take the card off-line ...
*/
/* Wait Forever */
while (ASR_resetIOP(sc) == 0);
}
retVal = ASR_init (sc);
splx (s);
if (retVal != 0) {
debug_asr_printf ("ASR_init failed\n");
sc->ha_in_reset = HA_OFF_LINE;
return (ENXIO);
}
if (ASR_rescan (sc) != 0) {
debug_asr_printf ("ASR_rescan failed\n");
}
ASR_failActiveCommands (sc);
if (sc->ha_in_reset == HA_OFF_LINE_RECOVERY) {
printf ("asr%d: Brining adapter back on-line\n",
sc->ha_path[0]
? cam_sim_unit(xpt_path_sim(sc->ha_path[0]))
: 0);
}
sc->ha_in_reset = HA_OPERATIONAL;
return (0);
} /* ASR_reset */
/*
* Device timeout handler.
*/
static void
asr_timeout(void *arg)
{
union asr_ccb *ccb = (union asr_ccb *)arg;
Asr_softc_t *sc = (Asr_softc_t *)(ccb->ccb_h.spriv_ptr0);
int s;
debug_asr_print_path(ccb);
debug_asr_printf("timed out");
/*
* Check if the adapter has locked up?
*/
if ((s = ASR_getBlinkLedCode(sc)) != 0) {
/* Reset Adapter */
printf ("asr%d: Blink LED 0x%x resetting adapter\n",
cam_sim_unit(xpt_path_sim(ccb->ccb_h.path)), s);
if (ASR_reset (sc) == ENXIO) {
/* Try again later */
ccb->ccb_h.timeout_ch = timeout(asr_timeout,
(caddr_t)ccb,
(ccb->ccb_h.timeout * hz) / 1000);
}
return;
}
/*
* Abort does not function on the ASR card!!! Walking away from
* the SCSI command is also *very* dangerous. A SCSI BUS reset is
* our best bet, followed by a complete adapter reset if that fails.
*/
s = splcam();
/* Check if we already timed out once to raise the issue */
if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_CMD_TIMEOUT) {
debug_asr_printf (" AGAIN\nreinitializing adapter\n");
if (ASR_reset (sc) == ENXIO) {
ccb->ccb_h.timeout_ch = timeout(asr_timeout,
(caddr_t)ccb,
(ccb->ccb_h.timeout * hz) / 1000);
}
splx(s);
return;
}
debug_asr_printf ("\nresetting bus\n");
/* If the BUS reset does not take, then an adapter reset is next! */
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_CMD_TIMEOUT;
ccb->ccb_h.timeout_ch = timeout(asr_timeout, (caddr_t)ccb,
(ccb->ccb_h.timeout * hz) / 1000);
ASR_resetBus (sc, cam_sim_bus(xpt_path_sim(ccb->ccb_h.path)));
xpt_async (AC_BUS_RESET, ccb->ccb_h.path, NULL);
splx(s);
} /* asr_timeout */
/*
* send a message asynchronously
*/
static int
ASR_queue(Asr_softc_t *sc, PI2O_MESSAGE_FRAME Message)
{
U32 MessageOffset;
union asr_ccb *ccb;
debug_asr_printf("Host Command Dump:\n");
debug_asr_dump_message(Message);
ccb = (union asr_ccb *)(long)
I2O_MESSAGE_FRAME_getInitiatorContext64(Message);
if ((MessageOffset = ASR_getMessage(sc)) != EMPTY_QUEUE) {
asr_set_frame(sc, Message, MessageOffset,
I2O_MESSAGE_FRAME_getMessageSize(Message));
if (ccb) {
ASR_ccbAdd (sc, ccb);
}
/* Post the command */
asr_set_ToFIFO(sc, MessageOffset);
} else {
if (ASR_getBlinkLedCode(sc)) {
/*
* Unlikely we can do anything if we can't grab a
* message frame :-(, but lets give it a try.
*/
(void)ASR_reset(sc);
}
}
return (MessageOffset);
} /* ASR_queue */
/* Simple Scatter Gather elements */
#define SG(SGL,Index,Flags,Buffer,Size) \
I2O_FLAGS_COUNT_setCount( \
&(((PI2O_SG_ELEMENT)(SGL))->u.Simple[Index].FlagsCount), \
Size); \
I2O_FLAGS_COUNT_setFlags( \
&(((PI2O_SG_ELEMENT)(SGL))->u.Simple[Index].FlagsCount), \
I2O_SGL_FLAGS_SIMPLE_ADDRESS_ELEMENT | (Flags)); \
I2O_SGE_SIMPLE_ELEMENT_setPhysicalAddress( \
&(((PI2O_SG_ELEMENT)(SGL))->u.Simple[Index]), \
(Buffer == NULL) ? 0 : KVTOPHYS(Buffer))
/*
* Retrieve Parameter Group.
*/
static void *
ASR_getParams(Asr_softc_t *sc, tid_t TID, int Group, void *Buffer,
unsigned BufferSize)
{
struct paramGetMessage {
I2O_UTIL_PARAMS_GET_MESSAGE M;
char
F[sizeof(I2O_SGE_SIMPLE_ELEMENT)*2 - sizeof(I2O_SG_ELEMENT)];
struct Operations {
I2O_PARAM_OPERATIONS_LIST_HEADER Header;
I2O_PARAM_OPERATION_ALL_TEMPLATE Template[1];
} O;
} Message;
struct Operations *Operations_Ptr;
I2O_UTIL_PARAMS_GET_MESSAGE *Message_Ptr;
struct ParamBuffer {
I2O_PARAM_RESULTS_LIST_HEADER Header;
I2O_PARAM_READ_OPERATION_RESULT Read;
char Info[1];
} *Buffer_Ptr;
Message_Ptr = (I2O_UTIL_PARAMS_GET_MESSAGE *)ASR_fillMessage(&Message,
sizeof(I2O_UTIL_PARAMS_GET_MESSAGE)
+ sizeof(I2O_SGE_SIMPLE_ELEMENT)*2 - sizeof(I2O_SG_ELEMENT));
Operations_Ptr = (struct Operations *)((char *)Message_Ptr
+ sizeof(I2O_UTIL_PARAMS_GET_MESSAGE)
+ sizeof(I2O_SGE_SIMPLE_ELEMENT)*2 - sizeof(I2O_SG_ELEMENT));
bzero(Operations_Ptr, sizeof(struct Operations));
I2O_PARAM_OPERATIONS_LIST_HEADER_setOperationCount(
&(Operations_Ptr->Header), 1);
I2O_PARAM_OPERATION_ALL_TEMPLATE_setOperation(
&(Operations_Ptr->Template[0]), I2O_PARAMS_OPERATION_FIELD_GET);
I2O_PARAM_OPERATION_ALL_TEMPLATE_setFieldCount(
&(Operations_Ptr->Template[0]), 0xFFFF);
I2O_PARAM_OPERATION_ALL_TEMPLATE_setGroupNumber(
&(Operations_Ptr->Template[0]), Group);
Buffer_Ptr = (struct ParamBuffer *)Buffer;
bzero(Buffer_Ptr, BufferSize);
I2O_MESSAGE_FRAME_setVersionOffset(&(Message_Ptr->StdMessageFrame),
I2O_VERSION_11
+ (((sizeof(I2O_UTIL_PARAMS_GET_MESSAGE) - sizeof(I2O_SG_ELEMENT))
/ sizeof(U32)) << 4));
I2O_MESSAGE_FRAME_setTargetAddress (&(Message_Ptr->StdMessageFrame),
TID);
I2O_MESSAGE_FRAME_setFunction (&(Message_Ptr->StdMessageFrame),
I2O_UTIL_PARAMS_GET);
/*
* Set up the buffers as scatter gather elements.
*/
SG(&(Message_Ptr->SGL), 0,
I2O_SGL_FLAGS_DIR | I2O_SGL_FLAGS_END_OF_BUFFER,
Operations_Ptr, sizeof(struct Operations));
SG(&(Message_Ptr->SGL), 1,
I2O_SGL_FLAGS_LAST_ELEMENT | I2O_SGL_FLAGS_END_OF_BUFFER,
Buffer_Ptr, BufferSize);
if ((ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr) == CAM_REQ_CMP)
&& (Buffer_Ptr->Header.ResultCount)) {
return ((void *)(Buffer_Ptr->Info));
}
return (NULL);
} /* ASR_getParams */
/*
* Acquire the LCT information.
*/
static int
ASR_acquireLct(Asr_softc_t *sc)
{
PI2O_EXEC_LCT_NOTIFY_MESSAGE Message_Ptr;
PI2O_SGE_SIMPLE_ELEMENT sg;
int MessageSizeInBytes;
caddr_t v;
int len;
I2O_LCT Table;
PI2O_LCT_ENTRY Entry;
/*
* sc value assumed valid
*/
MessageSizeInBytes = sizeof(I2O_EXEC_LCT_NOTIFY_MESSAGE) -
sizeof(I2O_SG_ELEMENT) + sizeof(I2O_SGE_SIMPLE_ELEMENT);
if ((Message_Ptr = (PI2O_EXEC_LCT_NOTIFY_MESSAGE)malloc(
MessageSizeInBytes, M_TEMP, M_WAITOK)) == NULL) {
return (ENOMEM);
}
(void)ASR_fillMessage((void *)Message_Ptr, MessageSizeInBytes);
I2O_MESSAGE_FRAME_setVersionOffset(&(Message_Ptr->StdMessageFrame),
(I2O_VERSION_11 + (((sizeof(I2O_EXEC_LCT_NOTIFY_MESSAGE) -
sizeof(I2O_SG_ELEMENT)) / sizeof(U32)) << 4)));
I2O_MESSAGE_FRAME_setFunction(&(Message_Ptr->StdMessageFrame),
I2O_EXEC_LCT_NOTIFY);
I2O_EXEC_LCT_NOTIFY_MESSAGE_setClassIdentifier(Message_Ptr,
I2O_CLASS_MATCH_ANYCLASS);
/*
* Call the LCT table to determine the number of device entries
* to reserve space for.
*/
SG(&(Message_Ptr->SGL), 0,
I2O_SGL_FLAGS_LAST_ELEMENT | I2O_SGL_FLAGS_END_OF_BUFFER, &Table,
sizeof(I2O_LCT));
/*
* since this code is reused in several systems, code efficiency
* is greater by using a shift operation rather than a divide by
* sizeof(u_int32_t).
*/
I2O_LCT_setTableSize(&Table,
(sizeof(I2O_LCT) - sizeof(I2O_LCT_ENTRY)) >> 2);
(void)ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr);
/*
* Determine the size of the LCT table.
*/
if (sc->ha_LCT) {
free(sc->ha_LCT, M_TEMP);
}
/*
* malloc only generates contiguous memory when less than a
* page is expected. We must break the request up into an SG list ...
*/
if (((len = (I2O_LCT_getTableSize(&Table) << 2)) <=
(sizeof(I2O_LCT) - sizeof(I2O_LCT_ENTRY)))
|| (len > (128 * 1024))) { /* Arbitrary */
free(Message_Ptr, M_TEMP);
return (EINVAL);
}
if ((sc->ha_LCT = (PI2O_LCT)malloc (len, M_TEMP, M_WAITOK)) == NULL) {
free(Message_Ptr, M_TEMP);
return (ENOMEM);
}
/*
* since this code is reused in several systems, code efficiency
* is greater by using a shift operation rather than a divide by
* sizeof(u_int32_t).
*/
I2O_LCT_setTableSize(sc->ha_LCT,
(sizeof(I2O_LCT) - sizeof(I2O_LCT_ENTRY)) >> 2);
/*
* Convert the access to the LCT table into a SG list.
*/
sg = Message_Ptr->SGL.u.Simple;
v = (caddr_t)(sc->ha_LCT);
for (;;) {
int next, base, span;
span = 0;
next = base = KVTOPHYS(v);
I2O_SGE_SIMPLE_ELEMENT_setPhysicalAddress(sg, base);
/* How far can we go contiguously */
while ((len > 0) && (base == next)) {
int size;
next = trunc_page(base) + PAGE_SIZE;
size = next - base;
if (size > len) {
size = len;
}
span += size;
v += size;
len -= size;
base = KVTOPHYS(v);
}
/* Construct the Flags */
I2O_FLAGS_COUNT_setCount(&(sg->FlagsCount), span);
{
int rw = I2O_SGL_FLAGS_SIMPLE_ADDRESS_ELEMENT;
if (len <= 0) {
rw = (I2O_SGL_FLAGS_SIMPLE_ADDRESS_ELEMENT
| I2O_SGL_FLAGS_LAST_ELEMENT
| I2O_SGL_FLAGS_END_OF_BUFFER);
}
I2O_FLAGS_COUNT_setFlags(&(sg->FlagsCount), rw);
}
if (len <= 0) {
break;
}
/*
* Incrementing requires resizing of the packet.
*/
++sg;
MessageSizeInBytes += sizeof(*sg);
I2O_MESSAGE_FRAME_setMessageSize(
&(Message_Ptr->StdMessageFrame),
I2O_MESSAGE_FRAME_getMessageSize(
&(Message_Ptr->StdMessageFrame))
+ (sizeof(*sg) / sizeof(U32)));
{
PI2O_EXEC_LCT_NOTIFY_MESSAGE NewMessage_Ptr;
if ((NewMessage_Ptr = (PI2O_EXEC_LCT_NOTIFY_MESSAGE)
malloc(MessageSizeInBytes, M_TEMP, M_WAITOK))
== NULL) {
free(sc->ha_LCT, M_TEMP);
sc->ha_LCT = NULL;
free(Message_Ptr, M_TEMP);
return (ENOMEM);
}
span = ((caddr_t)sg) - (caddr_t)Message_Ptr;
bcopy(Message_Ptr, NewMessage_Ptr, span);
free(Message_Ptr, M_TEMP);
sg = (PI2O_SGE_SIMPLE_ELEMENT)
(((caddr_t)NewMessage_Ptr) + span);
Message_Ptr = NewMessage_Ptr;
}
}
{ int retval;
retval = ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr);
free(Message_Ptr, M_TEMP);
if (retval != CAM_REQ_CMP) {
return (ENODEV);
}
}
/* If the LCT table grew, lets truncate accesses */
if (I2O_LCT_getTableSize(&Table) < I2O_LCT_getTableSize(sc->ha_LCT)) {
I2O_LCT_setTableSize(sc->ha_LCT, I2O_LCT_getTableSize(&Table));
}
for (Entry = sc->ha_LCT->LCTEntry; Entry < (PI2O_LCT_ENTRY)
(((U32 *)sc->ha_LCT)+I2O_LCT_getTableSize(sc->ha_LCT));
++Entry) {
Entry->le_type = I2O_UNKNOWN;
switch (I2O_CLASS_ID_getClass(&(Entry->ClassID))) {
case I2O_CLASS_RANDOM_BLOCK_STORAGE:
Entry->le_type = I2O_BSA;
break;
case I2O_CLASS_SCSI_PERIPHERAL:
Entry->le_type = I2O_SCSI;
break;
case I2O_CLASS_FIBRE_CHANNEL_PERIPHERAL:
Entry->le_type = I2O_FCA;
break;
case I2O_CLASS_BUS_ADAPTER_PORT:
Entry->le_type = I2O_PORT | I2O_SCSI;
/* FALLTHRU */
case I2O_CLASS_FIBRE_CHANNEL_PORT:
if (I2O_CLASS_ID_getClass(&(Entry->ClassID)) ==
I2O_CLASS_FIBRE_CHANNEL_PORT) {
Entry->le_type = I2O_PORT | I2O_FCA;
}
{ struct ControllerInfo {
I2O_PARAM_RESULTS_LIST_HEADER Header;
I2O_PARAM_READ_OPERATION_RESULT Read;
I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR Info;
} Buffer;
PI2O_HBA_SCSI_CONTROLLER_INFO_SCALAR Info;
Entry->le_bus = 0xff;
Entry->le_target = 0xff;
Entry->le_lun = 0xff;
if ((Info = (PI2O_HBA_SCSI_CONTROLLER_INFO_SCALAR)
ASR_getParams(sc,
I2O_LCT_ENTRY_getLocalTID(Entry),
I2O_HBA_SCSI_CONTROLLER_INFO_GROUP_NO,
&Buffer, sizeof(struct ControllerInfo))) == NULL) {
continue;
}
Entry->le_target
= I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR_getInitiatorID(
Info);
Entry->le_lun = 0;
} /* FALLTHRU */
default:
continue;
}
{ struct DeviceInfo {
I2O_PARAM_RESULTS_LIST_HEADER Header;
I2O_PARAM_READ_OPERATION_RESULT Read;
I2O_DPT_DEVICE_INFO_SCALAR Info;
} Buffer;
PI2O_DPT_DEVICE_INFO_SCALAR Info;
Entry->le_bus = 0xff;
Entry->le_target = 0xff;
Entry->le_lun = 0xff;
if ((Info = (PI2O_DPT_DEVICE_INFO_SCALAR)
ASR_getParams(sc,
I2O_LCT_ENTRY_getLocalTID(Entry),
I2O_DPT_DEVICE_INFO_GROUP_NO,
&Buffer, sizeof(struct DeviceInfo))) == NULL) {
continue;
}
Entry->le_type
|= I2O_DPT_DEVICE_INFO_SCALAR_getDeviceType(Info);
Entry->le_bus
= I2O_DPT_DEVICE_INFO_SCALAR_getBus(Info);
if ((Entry->le_bus > sc->ha_MaxBus)
&& (Entry->le_bus <= MAX_CHANNEL)) {
sc->ha_MaxBus = Entry->le_bus;
}
Entry->le_target
= I2O_DPT_DEVICE_INFO_SCALAR_getIdentifier(Info);
Entry->le_lun
= I2O_DPT_DEVICE_INFO_SCALAR_getLunInfo(Info);
}
}
/*
* A zero return value indicates success.
*/
return (0);
} /* ASR_acquireLct */
/*
* Initialize a message frame.
* We assume that the CDB has already been set up, so all we do here is
* generate the Scatter Gather list.
*/
static PI2O_MESSAGE_FRAME
ASR_init_message(union asr_ccb *ccb, PI2O_MESSAGE_FRAME Message)
{
PI2O_MESSAGE_FRAME Message_Ptr;
PI2O_SGE_SIMPLE_ELEMENT sg;
Asr_softc_t *sc = (Asr_softc_t *)(ccb->ccb_h.spriv_ptr0);
vm_size_t size, len;
caddr_t v;
U32 MessageSize;
int next, span, base, rw;
int target = ccb->ccb_h.target_id;
int lun = ccb->ccb_h.target_lun;
int bus =cam_sim_bus(xpt_path_sim(ccb->ccb_h.path));
tid_t TID;
/* We only need to zero out the PRIVATE_SCSI_SCB_EXECUTE_MESSAGE */
Message_Ptr = (I2O_MESSAGE_FRAME *)Message;
bzero(Message_Ptr, (sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE) -
sizeof(I2O_SG_ELEMENT)));
if ((TID = ASR_getTid (sc, bus, target, lun)) == (tid_t)-1) {
PI2O_LCT_ENTRY Device;
TID = 0;
for (Device = sc->ha_LCT->LCTEntry; Device < (PI2O_LCT_ENTRY)
(((U32 *)sc->ha_LCT) + I2O_LCT_getTableSize(sc->ha_LCT));
++Device) {
if ((Device->le_type != I2O_UNKNOWN)
&& (Device->le_bus == bus)
&& (Device->le_target == target)
&& (Device->le_lun == lun)
&& (I2O_LCT_ENTRY_getUserTID(Device) == 0xFFF)) {
TID = I2O_LCT_ENTRY_getLocalTID(Device);
ASR_setTid(sc, Device->le_bus,
Device->le_target, Device->le_lun,
TID);
break;
}
}
}
if (TID == (tid_t)0) {
return (NULL);
}
I2O_MESSAGE_FRAME_setTargetAddress(Message_Ptr, TID);
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setTID(
(PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr, TID);
I2O_MESSAGE_FRAME_setVersionOffset(Message_Ptr, I2O_VERSION_11 |
(((sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE) - sizeof(I2O_SG_ELEMENT))
/ sizeof(U32)) << 4));
I2O_MESSAGE_FRAME_setMessageSize(Message_Ptr,
(sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE)
- sizeof(I2O_SG_ELEMENT)) / sizeof(U32));
I2O_MESSAGE_FRAME_setInitiatorAddress (Message_Ptr, 1);
I2O_MESSAGE_FRAME_setFunction(Message_Ptr, I2O_PRIVATE_MESSAGE);
I2O_PRIVATE_MESSAGE_FRAME_setXFunctionCode (
(PI2O_PRIVATE_MESSAGE_FRAME)Message_Ptr, I2O_SCSI_SCB_EXEC);
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setSCBFlags (
(PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr,
I2O_SCB_FLAG_ENABLE_DISCONNECT
| I2O_SCB_FLAG_SIMPLE_QUEUE_TAG
| I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER);
/*
* We do not need any (optional byteswapping) method access to
* the Initiator & Transaction context field.
*/
I2O_MESSAGE_FRAME_setInitiatorContext64(Message, (long)ccb);
I2O_PRIVATE_MESSAGE_FRAME_setOrganizationID(
(PI2O_PRIVATE_MESSAGE_FRAME)Message_Ptr, DPT_ORGANIZATION_ID);
/*
* copy the cdb over
*/
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setCDBLength(
(PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr, ccb->csio.cdb_len);
bcopy(&(ccb->csio.cdb_io),
((PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr)->CDB,
ccb->csio.cdb_len);
/*
* Given a buffer describing a transfer, set up a scatter/gather map
* in a ccb to map that SCSI transfer.
*/
rw = (ccb->ccb_h.flags & CAM_DIR_IN) ? 0 : I2O_SGL_FLAGS_DIR;
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setSCBFlags (
(PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr,
(ccb->csio.dxfer_len)
? ((rw) ? (I2O_SCB_FLAG_XFER_TO_DEVICE
| I2O_SCB_FLAG_ENABLE_DISCONNECT
| I2O_SCB_FLAG_SIMPLE_QUEUE_TAG
| I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER)
: (I2O_SCB_FLAG_XFER_FROM_DEVICE
| I2O_SCB_FLAG_ENABLE_DISCONNECT
| I2O_SCB_FLAG_SIMPLE_QUEUE_TAG
| I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER))
: (I2O_SCB_FLAG_ENABLE_DISCONNECT
| I2O_SCB_FLAG_SIMPLE_QUEUE_TAG
| I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER));
/*
* Given a transfer described by a `data', fill in the SG list.
*/
sg = &((PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr)->SGL.u.Simple[0];
len = ccb->csio.dxfer_len;
v = ccb->csio.data_ptr;
KASSERT(ccb->csio.dxfer_len >= 0, ("csio.dxfer_len < 0"));
MessageSize = I2O_MESSAGE_FRAME_getMessageSize(Message_Ptr);
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setByteCount(
(PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr, len);
while ((len > 0) && (sg < &((PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)
Message_Ptr)->SGL.u.Simple[SG_SIZE])) {
span = 0;
next = base = KVTOPHYS(v);
I2O_SGE_SIMPLE_ELEMENT_setPhysicalAddress(sg, base);
/* How far can we go contiguously */
while ((len > 0) && (base == next)) {
next = trunc_page(base) + PAGE_SIZE;
size = next - base;
if (size > len) {
size = len;
}
span += size;
v += size;
len -= size;
base = KVTOPHYS(v);
}
I2O_FLAGS_COUNT_setCount(&(sg->FlagsCount), span);
if (len == 0) {
rw |= I2O_SGL_FLAGS_LAST_ELEMENT;
}
I2O_FLAGS_COUNT_setFlags(&(sg->FlagsCount),
I2O_SGL_FLAGS_SIMPLE_ADDRESS_ELEMENT | rw);
++sg;
MessageSize += sizeof(*sg) / sizeof(U32);
}
/* We always do the request sense ... */
if ((span = ccb->csio.sense_len) == 0) {
span = sizeof(ccb->csio.sense_data);
}
SG(sg, 0, I2O_SGL_FLAGS_LAST_ELEMENT | I2O_SGL_FLAGS_END_OF_BUFFER,
&(ccb->csio.sense_data), span);
I2O_MESSAGE_FRAME_setMessageSize(Message_Ptr,
MessageSize + (sizeof(*sg) / sizeof(U32)));
return (Message_Ptr);
} /* ASR_init_message */
/*
* Reset the adapter.
*/
static U32
ASR_initOutBound(Asr_softc_t *sc)
{
struct initOutBoundMessage {
I2O_EXEC_OUTBOUND_INIT_MESSAGE M;
U32 R;
} Message;
PI2O_EXEC_OUTBOUND_INIT_MESSAGE Message_Ptr;
U32 *volatile Reply_Ptr;
U32 Old;
/*
* Build up our copy of the Message.
*/
Message_Ptr = (PI2O_EXEC_OUTBOUND_INIT_MESSAGE)ASR_fillMessage(&Message,
sizeof(I2O_EXEC_OUTBOUND_INIT_MESSAGE));
I2O_MESSAGE_FRAME_setFunction(&(Message_Ptr->StdMessageFrame),
I2O_EXEC_OUTBOUND_INIT);
I2O_EXEC_OUTBOUND_INIT_MESSAGE_setHostPageFrameSize(Message_Ptr, PAGE_SIZE);
I2O_EXEC_OUTBOUND_INIT_MESSAGE_setOutboundMFrameSize(Message_Ptr,
sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME));
/*
* Reset the Reply Status
*/
*(Reply_Ptr = (U32 *)((char *)Message_Ptr
+ sizeof(I2O_EXEC_OUTBOUND_INIT_MESSAGE))) = 0;
SG (&(Message_Ptr->SGL), 0, I2O_SGL_FLAGS_LAST_ELEMENT, Reply_Ptr,
sizeof(U32));
/*
* Send the Message out
*/
if ((Old = ASR_initiateCp(sc, (PI2O_MESSAGE_FRAME)Message_Ptr)) !=
0xffffffff) {
u_long size, addr;
/*
* Wait for a response (Poll).
*/
while (*Reply_Ptr < I2O_EXEC_OUTBOUND_INIT_REJECTED);
/*
* Re-enable the interrupts.
*/
asr_set_intr(sc, Old);
/*
* Populate the outbound table.
*/
if (sc->ha_Msgs == NULL) {
/* Allocate the reply frames */
size = sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)
* sc->ha_Msgs_Count;
/*
* contigmalloc only works reliably at
* initialization time.
*/
if ((sc->ha_Msgs = (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)
contigmalloc (size, M_DEVBUF, M_WAITOK, 0ul,
0xFFFFFFFFul, (u_long)sizeof(U32), 0ul)) != NULL) {
bzero(sc->ha_Msgs, size);
sc->ha_Msgs_Phys = KVTOPHYS(sc->ha_Msgs);
}
}
/* Initialize the outbound FIFO */
if (sc->ha_Msgs != NULL)
for(size = sc->ha_Msgs_Count, addr = sc->ha_Msgs_Phys;
size; --size) {
asr_set_FromFIFO(sc, addr);
addr += sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME);
}
return (*Reply_Ptr);
}
return (0);
} /* ASR_initOutBound */
/*
* Set the system table
*/
static int
ASR_setSysTab(Asr_softc_t *sc)
{
PI2O_EXEC_SYS_TAB_SET_MESSAGE Message_Ptr;
PI2O_SET_SYSTAB_HEADER SystemTable;
Asr_softc_t * ha, *next;
PI2O_SGE_SIMPLE_ELEMENT sg;
int retVal;
if ((SystemTable = (PI2O_SET_SYSTAB_HEADER)malloc (
sizeof(I2O_SET_SYSTAB_HEADER), M_TEMP, M_WAITOK | M_ZERO)) == NULL) {
return (ENOMEM);
}
STAILQ_FOREACH(ha, &Asr_softc_list, ha_next) {
++SystemTable->NumberEntries;
}
if ((Message_Ptr = (PI2O_EXEC_SYS_TAB_SET_MESSAGE)malloc (
sizeof(I2O_EXEC_SYS_TAB_SET_MESSAGE) - sizeof(I2O_SG_ELEMENT)
+ ((3+SystemTable->NumberEntries) * sizeof(I2O_SGE_SIMPLE_ELEMENT)),
M_TEMP, M_WAITOK)) == NULL) {
free(SystemTable, M_TEMP);
return (ENOMEM);
}
(void)ASR_fillMessage((void *)Message_Ptr,
sizeof(I2O_EXEC_SYS_TAB_SET_MESSAGE) - sizeof(I2O_SG_ELEMENT)
+ ((3+SystemTable->NumberEntries) * sizeof(I2O_SGE_SIMPLE_ELEMENT)));
I2O_MESSAGE_FRAME_setVersionOffset(&(Message_Ptr->StdMessageFrame),
(I2O_VERSION_11 +
(((sizeof(I2O_EXEC_SYS_TAB_SET_MESSAGE) - sizeof(I2O_SG_ELEMENT))
/ sizeof(U32)) << 4)));
I2O_MESSAGE_FRAME_setFunction(&(Message_Ptr->StdMessageFrame),
I2O_EXEC_SYS_TAB_SET);
/*
* Call the LCT table to determine the number of device entries
* to reserve space for.
* since this code is reused in several systems, code efficiency
* is greater by using a shift operation rather than a divide by
* sizeof(u_int32_t).
*/
sg = (PI2O_SGE_SIMPLE_ELEMENT)((char *)Message_Ptr
+ ((I2O_MESSAGE_FRAME_getVersionOffset(
&(Message_Ptr->StdMessageFrame)) & 0xF0) >> 2));
SG(sg, 0, I2O_SGL_FLAGS_DIR, SystemTable, sizeof(I2O_SET_SYSTAB_HEADER));
++sg;
STAILQ_FOREACH_SAFE(ha, &Asr_softc_list, ha_next, next) {
SG(sg, 0,
((next)
? (I2O_SGL_FLAGS_DIR)
: (I2O_SGL_FLAGS_DIR | I2O_SGL_FLAGS_END_OF_BUFFER)),
&(ha->ha_SystemTable), sizeof(ha->ha_SystemTable));
++sg;
}
SG(sg, 0, I2O_SGL_FLAGS_DIR | I2O_SGL_FLAGS_END_OF_BUFFER, NULL, 0);
SG(sg, 1, I2O_SGL_FLAGS_DIR | I2O_SGL_FLAGS_LAST_ELEMENT
| I2O_SGL_FLAGS_END_OF_BUFFER, NULL, 0);
retVal = ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr);
free(Message_Ptr, M_TEMP);
free(SystemTable, M_TEMP);
return (retVal);
} /* ASR_setSysTab */
static int
ASR_acquireHrt(Asr_softc_t *sc)
{
I2O_EXEC_HRT_GET_MESSAGE Message;
I2O_EXEC_HRT_GET_MESSAGE *Message_Ptr;
struct {
I2O_HRT Header;
I2O_HRT_ENTRY Entry[MAX_CHANNEL];
} Hrt;
u_int8_t NumberOfEntries;
PI2O_HRT_ENTRY Entry;
bzero(&Hrt, sizeof (Hrt));
Message_Ptr = (I2O_EXEC_HRT_GET_MESSAGE *)ASR_fillMessage(&Message,
sizeof(I2O_EXEC_HRT_GET_MESSAGE) - sizeof(I2O_SG_ELEMENT)
+ sizeof(I2O_SGE_SIMPLE_ELEMENT));
I2O_MESSAGE_FRAME_setVersionOffset(&(Message_Ptr->StdMessageFrame),
(I2O_VERSION_11
+ (((sizeof(I2O_EXEC_HRT_GET_MESSAGE) - sizeof(I2O_SG_ELEMENT))
/ sizeof(U32)) << 4)));
I2O_MESSAGE_FRAME_setFunction (&(Message_Ptr->StdMessageFrame),
I2O_EXEC_HRT_GET);
/*
* Set up the buffers as scatter gather elements.
*/
SG(&(Message_Ptr->SGL), 0,
I2O_SGL_FLAGS_LAST_ELEMENT | I2O_SGL_FLAGS_END_OF_BUFFER,
&Hrt, sizeof(Hrt));
if (ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr) != CAM_REQ_CMP) {
return (ENODEV);
}
if ((NumberOfEntries = I2O_HRT_getNumberEntries(&Hrt.Header))
> (MAX_CHANNEL + 1)) {
NumberOfEntries = MAX_CHANNEL + 1;
}
for (Entry = Hrt.Header.HRTEntry;
NumberOfEntries != 0;
++Entry, --NumberOfEntries) {
PI2O_LCT_ENTRY Device;
for (Device = sc->ha_LCT->LCTEntry; Device < (PI2O_LCT_ENTRY)
(((U32 *)sc->ha_LCT)+I2O_LCT_getTableSize(sc->ha_LCT));
++Device) {
if (I2O_LCT_ENTRY_getLocalTID(Device)
== (I2O_HRT_ENTRY_getAdapterID(Entry) & 0xFFF)) {
Device->le_bus = I2O_HRT_ENTRY_getAdapterID(
Entry) >> 16;
if ((Device->le_bus > sc->ha_MaxBus)
&& (Device->le_bus <= MAX_CHANNEL)) {
sc->ha_MaxBus = Device->le_bus;
}
}
}
}
return (0);
} /* ASR_acquireHrt */
/*
* Enable the adapter.
*/
static int
ASR_enableSys(Asr_softc_t *sc)
{
I2O_EXEC_SYS_ENABLE_MESSAGE Message;
PI2O_EXEC_SYS_ENABLE_MESSAGE Message_Ptr;
Message_Ptr = (PI2O_EXEC_SYS_ENABLE_MESSAGE)ASR_fillMessage(&Message,
sizeof(I2O_EXEC_SYS_ENABLE_MESSAGE));
I2O_MESSAGE_FRAME_setFunction(&(Message_Ptr->StdMessageFrame),
I2O_EXEC_SYS_ENABLE);
return (ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr) != 0);
} /* ASR_enableSys */
/*
* Perform the stages necessary to initialize the adapter
*/
static int
ASR_init(Asr_softc_t *sc)
{
return ((ASR_initOutBound(sc) == 0)
|| (ASR_setSysTab(sc) != CAM_REQ_CMP)
|| (ASR_enableSys(sc) != CAM_REQ_CMP));
} /* ASR_init */
/*
* Send a Synchronize Cache command to the target device.
*/
static void
ASR_sync(Asr_softc_t *sc, int bus, int target, int lun)
{
tid_t TID;
/*
* We will not synchronize the device when there are outstanding
* commands issued by the OS (this is due to a locked up device,
* as the OS normally would flush all outstanding commands before
* issuing a shutdown or an adapter reset).
*/
if ((sc != NULL)
&& (LIST_FIRST(&(sc->ha_ccb)) != NULL)
&& ((TID = ASR_getTid (sc, bus, target, lun)) != (tid_t)-1)
&& (TID != (tid_t)0)) {
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE Message;
PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE Message_Ptr;
Message_Ptr = (PRIVATE_SCSI_SCB_EXECUTE_MESSAGE *)&Message;
bzero(Message_Ptr, sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE)
- sizeof(I2O_SG_ELEMENT) + sizeof(I2O_SGE_SIMPLE_ELEMENT));
I2O_MESSAGE_FRAME_setVersionOffset(
(PI2O_MESSAGE_FRAME)Message_Ptr,
I2O_VERSION_11
| (((sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE)
- sizeof(I2O_SG_ELEMENT))
/ sizeof(U32)) << 4));
I2O_MESSAGE_FRAME_setMessageSize(
(PI2O_MESSAGE_FRAME)Message_Ptr,
(sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE)
- sizeof(I2O_SG_ELEMENT))
/ sizeof(U32));
I2O_MESSAGE_FRAME_setInitiatorAddress (
(PI2O_MESSAGE_FRAME)Message_Ptr, 1);
I2O_MESSAGE_FRAME_setFunction(
(PI2O_MESSAGE_FRAME)Message_Ptr, I2O_PRIVATE_MESSAGE);
I2O_MESSAGE_FRAME_setTargetAddress(
(PI2O_MESSAGE_FRAME)Message_Ptr, TID);
I2O_PRIVATE_MESSAGE_FRAME_setXFunctionCode (
(PI2O_PRIVATE_MESSAGE_FRAME)Message_Ptr,
I2O_SCSI_SCB_EXEC);
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setTID(Message_Ptr, TID);
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setSCBFlags (Message_Ptr,
I2O_SCB_FLAG_ENABLE_DISCONNECT
| I2O_SCB_FLAG_SIMPLE_QUEUE_TAG
| I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER);
I2O_PRIVATE_MESSAGE_FRAME_setOrganizationID(
(PI2O_PRIVATE_MESSAGE_FRAME)Message_Ptr,
DPT_ORGANIZATION_ID);
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setCDBLength(Message_Ptr, 6);
Message_Ptr->CDB[0] = SYNCHRONIZE_CACHE;
Message_Ptr->CDB[1] = (lun << 5);
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setSCBFlags (Message_Ptr,
(I2O_SCB_FLAG_XFER_FROM_DEVICE
| I2O_SCB_FLAG_ENABLE_DISCONNECT
| I2O_SCB_FLAG_SIMPLE_QUEUE_TAG
| I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER));
(void)ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr);
}
}
static void
ASR_synchronize(Asr_softc_t *sc)
{
int bus, target, lun;
for (bus = 0; bus <= sc->ha_MaxBus; ++bus) {
for (target = 0; target <= sc->ha_MaxId; ++target) {
for (lun = 0; lun <= sc->ha_MaxLun; ++lun) {
ASR_sync(sc,bus,target,lun);
}
}
}
}
/*
* Reset the HBA, targets and BUS.
* Currently this resets *all* the SCSI busses.
*/
static __inline void
asr_hbareset(Asr_softc_t *sc)
{
ASR_synchronize(sc);
(void)ASR_reset(sc);
} /* asr_hbareset */
/*
* A reduced copy of the real pci_map_mem, incorporating the MAX_MAP
* limit and a reduction in error checking (in the pre 4.0 case).
*/
static int
asr_pci_map_mem(device_t dev, Asr_softc_t *sc)
{
int rid;
u_int32_t p, l, s;
/*
* I2O specification says we must find first *memory* mapped BAR
*/
for (rid = 0; rid < 4; rid++) {
p = pci_read_config(dev, PCIR_BAR(rid), sizeof(p));
if ((p & 1) == 0) {
break;
}
}
/*
* Give up?
*/
if (rid >= 4) {
rid = 0;
}
rid = PCIR_BAR(rid);
p = pci_read_config(dev, rid, sizeof(p));
pci_write_config(dev, rid, -1, sizeof(p));
l = 0 - (pci_read_config(dev, rid, sizeof(l)) & ~15);
pci_write_config(dev, rid, p, sizeof(p));
if (l > MAX_MAP) {
l = MAX_MAP;
}
/*
* The 2005S Zero Channel RAID solution is not a perfect PCI
* citizen. It asks for 4MB on BAR0, and 0MB on BAR1, once
* enabled it rewrites the size of BAR0 to 2MB, sets BAR1 to
* BAR0+2MB and sets it's size to 2MB. The IOP registers are
* accessible via BAR0, the messaging registers are accessible
* via BAR1. If the subdevice code is 50 to 59 decimal.
*/
s = pci_read_config(dev, PCIR_DEVVENDOR, sizeof(s));
if (s != 0xA5111044) {
s = pci_read_config(dev, PCIR_SUBVEND_0, sizeof(s));
if ((((ADPTDOMINATOR_SUB_ID_START ^ s) & 0xF000FFFF) == 0)
&& (ADPTDOMINATOR_SUB_ID_START <= s)
&& (s <= ADPTDOMINATOR_SUB_ID_END)) {
l = MAX_MAP; /* Conjoined BAR Raptor Daptor */
}
}
p &= ~15;
sc->ha_mem_res = bus_alloc_resource(dev, SYS_RES_MEMORY, &rid,
p, p + l, l, RF_ACTIVE);
if (sc->ha_mem_res == NULL) {
return (0);
}
sc->ha_Base = rman_get_start(sc->ha_mem_res);
sc->ha_i2o_bhandle = rman_get_bushandle(sc->ha_mem_res);
sc->ha_i2o_btag = rman_get_bustag(sc->ha_mem_res);
if (s == 0xA5111044) { /* Split BAR Raptor Daptor */
if ((rid += sizeof(u_int32_t)) >= PCIR_BAR(4)) {
return (0);
}
p = pci_read_config(dev, rid, sizeof(p));
pci_write_config(dev, rid, -1, sizeof(p));
l = 0 - (pci_read_config(dev, rid, sizeof(l)) & ~15);
pci_write_config(dev, rid, p, sizeof(p));
if (l > MAX_MAP) {
l = MAX_MAP;
}
p &= ~15;
sc->ha_mes_res = bus_alloc_resource(dev, SYS_RES_MEMORY, &rid,
p, p + l, l, RF_ACTIVE);
if (sc->ha_mes_res == NULL) {
return (0);
}
sc->ha_frame_bhandle = rman_get_bushandle(sc->ha_mes_res);
sc->ha_frame_btag = rman_get_bustag(sc->ha_mes_res);
} else {
sc->ha_frame_bhandle = sc->ha_i2o_bhandle;
sc->ha_frame_btag = sc->ha_i2o_btag;
}
return (1);
} /* asr_pci_map_mem */
/*
* A simplified copy of the real pci_map_int with additional
* registration requirements.
*/
static int
asr_pci_map_int(device_t dev, Asr_softc_t *sc)
{
int rid = 0;
sc->ha_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
RF_ACTIVE | RF_SHAREABLE);
if (sc->ha_irq_res == NULL) {
return (0);
}
if (bus_setup_intr(dev, sc->ha_irq_res, INTR_TYPE_CAM | INTR_ENTROPY,
NULL, (driver_intr_t *)asr_intr, (void *)sc, &(sc->ha_intr))) {
return (0);
}
sc->ha_irq = pci_read_config(dev, PCIR_INTLINE, sizeof(char));
return (1);
} /* asr_pci_map_int */
static void
asr_status_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error)
{
Asr_softc_t *sc;
if (error)
return;
sc = (Asr_softc_t *)arg;
/* XXX
* The status word can be at a 64-bit address, but the existing
* accessor macros simply cannot manipulate 64-bit addresses.
*/
sc->ha_status_phys = (u_int32_t)segs[0].ds_addr +
offsetof(struct Asr_status_mem, status);
sc->ha_rstatus_phys = (u_int32_t)segs[0].ds_addr +
offsetof(struct Asr_status_mem, rstatus);
}
static int
asr_alloc_dma(Asr_softc_t *sc)
{
device_t dev;
dev = sc->ha_dev;
if (bus_dma_tag_create(bus_get_dma_tag(dev), /* PCI parent */
1, 0, /* algnmnt, boundary */
BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
BUS_SPACE_MAXSIZE_32BIT, /* maxsize */
BUS_SPACE_UNRESTRICTED, /* nsegments */
BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->ha_parent_dmat)) {
device_printf(dev, "Cannot allocate parent DMA tag\n");
return (ENOMEM);
}
if (bus_dma_tag_create(sc->ha_parent_dmat, /* parent */
1, 0, /* algnmnt, boundary */
BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
sizeof(sc->ha_statusmem),/* maxsize */
1, /* nsegments */
sizeof(sc->ha_statusmem),/* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->ha_statusmem_dmat)) {
device_printf(dev, "Cannot allocate status DMA tag\n");
bus_dma_tag_destroy(sc->ha_parent_dmat);
return (ENOMEM);
}
if (bus_dmamem_alloc(sc->ha_statusmem_dmat, (void **)&sc->ha_statusmem,
BUS_DMA_NOWAIT, &sc->ha_statusmem_dmamap)) {
device_printf(dev, "Cannot allocate status memory\n");
bus_dma_tag_destroy(sc->ha_statusmem_dmat);
bus_dma_tag_destroy(sc->ha_parent_dmat);
return (ENOMEM);
}
(void)bus_dmamap_load(sc->ha_statusmem_dmat, sc->ha_statusmem_dmamap,
sc->ha_statusmem, sizeof(sc->ha_statusmem), asr_status_cb, sc, 0);
return (0);
}
static void
asr_release_dma(Asr_softc_t *sc)
{
if (sc->ha_rstatus_phys != 0)
bus_dmamap_unload(sc->ha_statusmem_dmat,
sc->ha_statusmem_dmamap);
if (sc->ha_statusmem != NULL)
bus_dmamem_free(sc->ha_statusmem_dmat, sc->ha_statusmem,
sc->ha_statusmem_dmamap);
if (sc->ha_statusmem_dmat != NULL)
bus_dma_tag_destroy(sc->ha_statusmem_dmat);
if (sc->ha_parent_dmat != NULL)
bus_dma_tag_destroy(sc->ha_parent_dmat);
}
/*
* Attach the devices, and virtual devices to the driver list.
*/
static int
asr_attach(device_t dev)
{
PI2O_EXEC_STATUS_GET_REPLY status;
PI2O_LCT_ENTRY Device;
Asr_softc_t *sc;
struct scsi_inquiry_data *iq;
int bus, size, unit;
int error;
sc = device_get_softc(dev);
unit = device_get_unit(dev);
sc->ha_dev = dev;
if (STAILQ_EMPTY(&Asr_softc_list)) {
/*
* Fixup the OS revision as saved in the dptsig for the
* engine (dptioctl.h) to pick up.
*/
bcopy(osrelease, &ASR_sig.dsDescription[16], 5);
}
/*
* Initialize the software structure
*/
LIST_INIT(&(sc->ha_ccb));
/* Link us into the HA list */
STAILQ_INSERT_TAIL(&Asr_softc_list, sc, ha_next);
/*
* This is the real McCoy!
*/
if (!asr_pci_map_mem(dev, sc)) {
device_printf(dev, "could not map memory\n");
return(ENXIO);
}
/* Enable if not formerly enabled */
pci_write_config(dev, PCIR_COMMAND,
pci_read_config(dev, PCIR_COMMAND, sizeof(char)) |
PCIM_CMD_MEMEN | PCIM_CMD_BUSMASTEREN, sizeof(char));
sc->ha_pciBusNum = pci_get_bus(dev);
sc->ha_pciDeviceNum = (pci_get_slot(dev) << 3) | pci_get_function(dev);
if ((error = asr_alloc_dma(sc)) != 0)
return (error);
/* Check if the device is there? */
if (ASR_resetIOP(sc) == 0) {
device_printf(dev, "Cannot reset adapter\n");
asr_release_dma(sc);
return (EIO);
}
status = &sc->ha_statusmem->status;
if (ASR_getStatus(sc) == NULL) {
device_printf(dev, "could not initialize hardware\n");
asr_release_dma(sc);
return(ENODEV);
}
sc->ha_SystemTable.OrganizationID = status->OrganizationID;
sc->ha_SystemTable.IOP_ID = status->IOP_ID;
sc->ha_SystemTable.I2oVersion = status->I2oVersion;
sc->ha_SystemTable.IopState = status->IopState;
sc->ha_SystemTable.MessengerType = status->MessengerType;
sc->ha_SystemTable.InboundMessageFrameSize = status->InboundMFrameSize;
sc->ha_SystemTable.MessengerInfo.InboundMessagePortAddressLow =
(U32)(sc->ha_Base + I2O_REG_TOFIFO); /* XXX 64-bit */
if (!asr_pci_map_int(dev, (void *)sc)) {
device_printf(dev, "could not map interrupt\n");
asr_release_dma(sc);
return(ENXIO);
}
/* Adjust the maximim inbound count */
if (((sc->ha_QueueSize =
I2O_EXEC_STATUS_GET_REPLY_getMaxInboundMFrames(status)) >
MAX_INBOUND) || (sc->ha_QueueSize == 0)) {
sc->ha_QueueSize = MAX_INBOUND;
}
/* Adjust the maximum outbound count */
if (((sc->ha_Msgs_Count =
I2O_EXEC_STATUS_GET_REPLY_getMaxOutboundMFrames(status)) >
MAX_OUTBOUND) || (sc->ha_Msgs_Count == 0)) {
sc->ha_Msgs_Count = MAX_OUTBOUND;
}
if (sc->ha_Msgs_Count > sc->ha_QueueSize) {
sc->ha_Msgs_Count = sc->ha_QueueSize;
}
/* Adjust the maximum SG size to adapter */
if ((size = (I2O_EXEC_STATUS_GET_REPLY_getInboundMFrameSize(status) <<
2)) > MAX_INBOUND_SIZE) {
size = MAX_INBOUND_SIZE;
}
sc->ha_SgSize = (size - sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE)
+ sizeof(I2O_SG_ELEMENT)) / sizeof(I2O_SGE_SIMPLE_ELEMENT);
/*
* Only do a bus/HBA reset on the first time through. On this
* first time through, we do not send a flush to the devices.
*/
if (ASR_init(sc) == 0) {
struct BufferInfo {
I2O_PARAM_RESULTS_LIST_HEADER Header;
I2O_PARAM_READ_OPERATION_RESULT Read;
I2O_DPT_EXEC_IOP_BUFFERS_SCALAR Info;
} Buffer;
PI2O_DPT_EXEC_IOP_BUFFERS_SCALAR Info;
#define FW_DEBUG_BLED_OFFSET 8
if ((Info = (PI2O_DPT_EXEC_IOP_BUFFERS_SCALAR)
ASR_getParams(sc, 0, I2O_DPT_EXEC_IOP_BUFFERS_GROUP_NO,
&Buffer, sizeof(struct BufferInfo))) != NULL) {
sc->ha_blinkLED = FW_DEBUG_BLED_OFFSET +
I2O_DPT_EXEC_IOP_BUFFERS_SCALAR_getSerialOutputOffset(Info);
}
if (ASR_acquireLct(sc) == 0) {
(void)ASR_acquireHrt(sc);
}
} else {
device_printf(dev, "failed to initialize\n");
asr_release_dma(sc);
return(ENXIO);
}
/*
* Add in additional probe responses for more channels. We
* are reusing the variable `target' for a channel loop counter.
* Done here because of we need both the acquireLct and
* acquireHrt data.
*/
for (Device = sc->ha_LCT->LCTEntry; Device < (PI2O_LCT_ENTRY)
(((U32 *)sc->ha_LCT)+I2O_LCT_getTableSize(sc->ha_LCT)); ++Device) {
if (Device->le_type == I2O_UNKNOWN) {
continue;
}
if (I2O_LCT_ENTRY_getUserTID(Device) == 0xFFF) {
if (Device->le_target > sc->ha_MaxId) {
sc->ha_MaxId = Device->le_target;
}
if (Device->le_lun > sc->ha_MaxLun) {
sc->ha_MaxLun = Device->le_lun;
}
}
if (((Device->le_type & I2O_PORT) != 0)
&& (Device->le_bus <= MAX_CHANNEL)) {
/* Do not increase MaxId for efficiency */
sc->ha_adapter_target[Device->le_bus] =
Device->le_target;
}
}
/*
* Print the HBA model number as inquired from the card.
*/
device_printf(dev, " ");
if ((iq = (struct scsi_inquiry_data *)malloc(
sizeof(struct scsi_inquiry_data), M_TEMP, M_WAITOK | M_ZERO)) !=
NULL) {
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE Message;
PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE Message_Ptr;
int posted = 0;
Message_Ptr = (PRIVATE_SCSI_SCB_EXECUTE_MESSAGE *)&Message;
bzero(Message_Ptr, sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE) -
sizeof(I2O_SG_ELEMENT) + sizeof(I2O_SGE_SIMPLE_ELEMENT));
I2O_MESSAGE_FRAME_setVersionOffset(
(PI2O_MESSAGE_FRAME)Message_Ptr, I2O_VERSION_11 |
(((sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE)
- sizeof(I2O_SG_ELEMENT)) / sizeof(U32)) << 4));
I2O_MESSAGE_FRAME_setMessageSize(
(PI2O_MESSAGE_FRAME)Message_Ptr,
(sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE) -
sizeof(I2O_SG_ELEMENT) + sizeof(I2O_SGE_SIMPLE_ELEMENT)) /
sizeof(U32));
I2O_MESSAGE_FRAME_setInitiatorAddress(
(PI2O_MESSAGE_FRAME)Message_Ptr, 1);
I2O_MESSAGE_FRAME_setFunction(
(PI2O_MESSAGE_FRAME)Message_Ptr, I2O_PRIVATE_MESSAGE);
I2O_PRIVATE_MESSAGE_FRAME_setXFunctionCode(
(PI2O_PRIVATE_MESSAGE_FRAME)Message_Ptr, I2O_SCSI_SCB_EXEC);
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setSCBFlags (Message_Ptr,
I2O_SCB_FLAG_ENABLE_DISCONNECT
| I2O_SCB_FLAG_SIMPLE_QUEUE_TAG
| I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER);
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setInterpret(Message_Ptr, 1);
I2O_PRIVATE_MESSAGE_FRAME_setOrganizationID(
(PI2O_PRIVATE_MESSAGE_FRAME)Message_Ptr,
DPT_ORGANIZATION_ID);
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setCDBLength(Message_Ptr, 6);
Message_Ptr->CDB[0] = INQUIRY;
Message_Ptr->CDB[4] =
(unsigned char)sizeof(struct scsi_inquiry_data);
if (Message_Ptr->CDB[4] == 0) {
Message_Ptr->CDB[4] = 255;
}
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setSCBFlags (Message_Ptr,
(I2O_SCB_FLAG_XFER_FROM_DEVICE
| I2O_SCB_FLAG_ENABLE_DISCONNECT
| I2O_SCB_FLAG_SIMPLE_QUEUE_TAG
| I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER));
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setByteCount(
(PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr,
sizeof(struct scsi_inquiry_data));
SG(&(Message_Ptr->SGL), 0,
I2O_SGL_FLAGS_LAST_ELEMENT | I2O_SGL_FLAGS_END_OF_BUFFER,
iq, sizeof(struct scsi_inquiry_data));
(void)ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr);
if (iq->vendor[0] && (iq->vendor[0] != ' ')) {
printf (" ");
ASR_prstring (iq->vendor, 8);
++posted;
}
if (iq->product[0] && (iq->product[0] != ' ')) {
printf (" ");
ASR_prstring (iq->product, 16);
++posted;
}
if (iq->revision[0] && (iq->revision[0] != ' ')) {
printf (" FW Rev. ");
ASR_prstring (iq->revision, 4);
++posted;
}
free(iq, M_TEMP);
if (posted) {
printf (",");
}
}
printf (" %d channel, %d CCBs, Protocol I2O\n", sc->ha_MaxBus + 1,
(sc->ha_QueueSize > MAX_INBOUND) ? MAX_INBOUND : sc->ha_QueueSize);
for (bus = 0; bus <= sc->ha_MaxBus; ++bus) {
struct cam_devq * devq;
int QueueSize = sc->ha_QueueSize;
if (QueueSize > MAX_INBOUND) {
QueueSize = MAX_INBOUND;
}
/*
* Create the device queue for our SIM(s).
*/
if ((devq = cam_simq_alloc(QueueSize)) == NULL) {
continue;
}
/*
* Construct our first channel SIM entry
*/
sc->ha_sim[bus] = cam_sim_alloc(asr_action, asr_poll, "asr", sc,
unit, &Giant,
1, QueueSize, devq);
if (sc->ha_sim[bus] == NULL) {
continue;
}
if (xpt_bus_register(sc->ha_sim[bus], dev, bus) != CAM_SUCCESS){
cam_sim_free(sc->ha_sim[bus],
/*free_devq*/TRUE);
sc->ha_sim[bus] = NULL;
continue;
}
if (xpt_create_path(&(sc->ha_path[bus]), /*periph*/NULL,
cam_sim_path(sc->ha_sim[bus]), CAM_TARGET_WILDCARD,
CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
xpt_bus_deregister( cam_sim_path(sc->ha_sim[bus]));
cam_sim_free(sc->ha_sim[bus], /*free_devq*/TRUE);
sc->ha_sim[bus] = NULL;
continue;
}
}
/*
* Generate the device node information
*/
sc->ha_devt = make_dev(&asr_cdevsw, unit, UID_ROOT, GID_OPERATOR, 0640,
"asr%d", unit);
if (sc->ha_devt != NULL)
(void)make_dev_alias(sc->ha_devt, "rdpti%d", unit);
sc->ha_devt->si_drv1 = sc;
return(0);
} /* asr_attach */
static void
asr_poll(struct cam_sim *sim)
{
asr_intr(cam_sim_softc(sim));
} /* asr_poll */
static void
asr_action(struct cam_sim *sim, union ccb *ccb)
{
struct Asr_softc *sc;
debug_asr_printf("asr_action(%lx,%lx{%x})\n", (u_long)sim, (u_long)ccb,
ccb->ccb_h.func_code);
CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("asr_action\n"));
ccb->ccb_h.spriv_ptr0 = sc = (struct Asr_softc *)cam_sim_softc(sim);
switch ((int)ccb->ccb_h.func_code) {
/* Common cases first */
case XPT_SCSI_IO: /* Execute the requested I/O operation */
{
struct Message {
char M[MAX_INBOUND_SIZE];
} Message;
PI2O_MESSAGE_FRAME Message_Ptr;
/* Reject incoming commands while we are resetting the card */
if (sc->ha_in_reset != HA_OPERATIONAL) {
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
if (sc->ha_in_reset >= HA_OFF_LINE) {
/* HBA is now off-line */
ccb->ccb_h.status |= CAM_UNREC_HBA_ERROR;
} else {
/* HBA currently resetting, try again later. */
ccb->ccb_h.status |= CAM_REQUEUE_REQ;
}
debug_asr_cmd_printf (" e\n");
xpt_done(ccb);
debug_asr_cmd_printf (" q\n");
break;
}
if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_INPROG) {
printf(
"asr%d WARNING: scsi_cmd(%x) already done on b%dt%du%d\n",
cam_sim_unit(xpt_path_sim(ccb->ccb_h.path)),
ccb->csio.cdb_io.cdb_bytes[0],
cam_sim_bus(sim),
ccb->ccb_h.target_id,
ccb->ccb_h.target_lun);
}
debug_asr_cmd_printf("(%d,%d,%d,%d)", cam_sim_unit(sim),
cam_sim_bus(sim), ccb->ccb_h.target_id,
ccb->ccb_h.target_lun);
debug_asr_dump_ccb(ccb);
if ((Message_Ptr = ASR_init_message((union asr_ccb *)ccb,
(PI2O_MESSAGE_FRAME)&Message)) != NULL) {
debug_asr_cmd2_printf ("TID=%x:\n",
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_getTID(
(PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr));
debug_asr_cmd2_dump_message(Message_Ptr);
debug_asr_cmd1_printf (" q");
if (ASR_queue (sc, Message_Ptr) == EMPTY_QUEUE) {
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_REQUEUE_REQ;
debug_asr_cmd_printf (" E\n");
xpt_done(ccb);
}
debug_asr_cmd_printf(" Q\n");
break;
}
/*
* We will get here if there is no valid TID for the device
* referenced in the scsi command packet.
*/
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_SEL_TIMEOUT;
debug_asr_cmd_printf (" B\n");
xpt_done(ccb);
break;
}
case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */
/* Rese HBA device ... */
asr_hbareset (sc);
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
#if (defined(REPORT_LUNS))
case REPORT_LUNS:
#endif
case XPT_ABORT: /* Abort the specified CCB */
/* XXX Implement */
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
case XPT_SET_TRAN_SETTINGS:
/* XXX Implement */
ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
xpt_done(ccb);
break;
case XPT_GET_TRAN_SETTINGS:
/* Get default/user set transfer settings for the target */
{
struct ccb_trans_settings *cts = &(ccb->cts);
struct ccb_trans_settings_scsi *scsi =
&cts->proto_specific.scsi;
struct ccb_trans_settings_spi *spi =
&cts->xport_specific.spi;
if (cts->type == CTS_TYPE_USER_SETTINGS) {
cts->protocol = PROTO_SCSI;
cts->protocol_version = SCSI_REV_2;
cts->transport = XPORT_SPI;
cts->transport_version = 2;
scsi->flags = CTS_SCSI_FLAGS_TAG_ENB;
spi->flags = CTS_SPI_FLAGS_DISC_ENB;
spi->bus_width = MSG_EXT_WDTR_BUS_16_BIT;
spi->sync_period = 6; /* 40MHz */
spi->sync_offset = 15;
spi->valid = CTS_SPI_VALID_SYNC_RATE
| CTS_SPI_VALID_SYNC_OFFSET
| CTS_SPI_VALID_BUS_WIDTH
| CTS_SPI_VALID_DISC;
scsi->valid = CTS_SCSI_VALID_TQ;
ccb->ccb_h.status = CAM_REQ_CMP;
} else {
ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
}
xpt_done(ccb);
break;
}
case XPT_CALC_GEOMETRY:
{
struct ccb_calc_geometry *ccg;
u_int32_t size_mb;
u_int32_t secs_per_cylinder;
ccg = &(ccb->ccg);
size_mb = ccg->volume_size
/ ((1024L * 1024L) / ccg->block_size);
if (size_mb > 4096) {
ccg->heads = 255;
ccg->secs_per_track = 63;
} else if (size_mb > 2048) {
ccg->heads = 128;
ccg->secs_per_track = 63;
} else if (size_mb > 1024) {
ccg->heads = 65;
ccg->secs_per_track = 63;
} else {
ccg->heads = 64;
ccg->secs_per_track = 32;
}
secs_per_cylinder = ccg->heads * ccg->secs_per_track;
ccg->cylinders = ccg->volume_size / secs_per_cylinder;
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_RESET_BUS: /* Reset the specified SCSI bus */
ASR_resetBus (sc, cam_sim_bus(sim));
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
case XPT_TERM_IO: /* Terminate the I/O process */
/* XXX Implement */
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
case XPT_PATH_INQ: /* Path routing inquiry */
{
struct ccb_pathinq *cpi = &(ccb->cpi);
cpi->version_num = 1; /* XXX??? */
cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE|PI_WIDE_16;
cpi->target_sprt = 0;
/* Not necessary to reset bus, done by HDM initialization */
cpi->hba_misc = PIM_NOBUSRESET;
cpi->hba_eng_cnt = 0;
cpi->max_target = sc->ha_MaxId;
cpi->max_lun = sc->ha_MaxLun;
cpi->initiator_id = sc->ha_adapter_target[cam_sim_bus(sim)];
cpi->bus_id = cam_sim_bus(sim);
cpi->base_transfer_speed = 3300;
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(cpi->hba_vid, "Adaptec", HBA_IDLEN);
strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
cpi->unit_number = cam_sim_unit(sim);
cpi->ccb_h.status = CAM_REQ_CMP;
cpi->transport = XPORT_SPI;
cpi->transport_version = 2;
cpi->protocol = PROTO_SCSI;
cpi->protocol_version = SCSI_REV_2;
xpt_done(ccb);
break;
}
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
} /* asr_action */
/*
* Handle processing of current CCB as pointed to by the Status.
*/
static int
asr_intr(Asr_softc_t *sc)
{
int processed;
for(processed = 0; asr_get_status(sc) & Mask_InterruptsDisabled;
processed = 1) {
union asr_ccb *ccb;
u_int dsc;
U32 ReplyOffset;
PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME Reply;
if (((ReplyOffset = asr_get_FromFIFO(sc)) == EMPTY_QUEUE)
&& ((ReplyOffset = asr_get_FromFIFO(sc)) == EMPTY_QUEUE)) {
break;
}
Reply = (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)(ReplyOffset
- sc->ha_Msgs_Phys + (char *)(sc->ha_Msgs));
/*
* We do not need any (optional byteswapping) method access to
* the Initiator context field.
*/
ccb = (union asr_ccb *)(long)
I2O_MESSAGE_FRAME_getInitiatorContext64(
&(Reply->StdReplyFrame.StdMessageFrame));
if (I2O_MESSAGE_FRAME_getMsgFlags(
&(Reply->StdReplyFrame.StdMessageFrame))
& I2O_MESSAGE_FLAGS_FAIL) {
I2O_UTIL_NOP_MESSAGE Message;
PI2O_UTIL_NOP_MESSAGE Message_Ptr;
U32 MessageOffset;
MessageOffset = (u_long)
I2O_FAILURE_REPLY_MESSAGE_FRAME_getPreservedMFA(
(PI2O_FAILURE_REPLY_MESSAGE_FRAME)Reply);
/*
* Get the Original Message Frame's address, and get
* it's Transaction Context into our space. (Currently
* unused at original authorship, but better to be
* safe than sorry). Straight copy means that we
* need not concern ourselves with the (optional
* byteswapping) method access.
*/
Reply->StdReplyFrame.TransactionContext =
bus_space_read_4(sc->ha_frame_btag,
sc->ha_frame_bhandle, MessageOffset +
offsetof(I2O_SINGLE_REPLY_MESSAGE_FRAME,
TransactionContext));
/*
* For 64 bit machines, we need to reconstruct the
* 64 bit context.
*/
ccb = (union asr_ccb *)(long)
I2O_MESSAGE_FRAME_getInitiatorContext64(
&(Reply->StdReplyFrame.StdMessageFrame));
/*
* Unique error code for command failure.
*/
I2O_SINGLE_REPLY_MESSAGE_FRAME_setDetailedStatusCode(
&(Reply->StdReplyFrame), (u_int16_t)-2);
/*
* Modify the message frame to contain a NOP and
* re-issue it to the controller.
*/
Message_Ptr = (PI2O_UTIL_NOP_MESSAGE)ASR_fillMessage(
&Message, sizeof(I2O_UTIL_NOP_MESSAGE));
#if (I2O_UTIL_NOP != 0)
I2O_MESSAGE_FRAME_setFunction (
&(Message_Ptr->StdMessageFrame),
I2O_UTIL_NOP);
#endif
/*
* Copy the packet out to the Original Message
*/
asr_set_frame(sc, Message_Ptr, MessageOffset,
sizeof(I2O_UTIL_NOP_MESSAGE));
/*
* Issue the NOP
*/
asr_set_ToFIFO(sc, MessageOffset);
}
/*
* Asynchronous command with no return requirements,
* and a generic handler for immunity against odd error
* returns from the adapter.
*/
if (ccb == NULL) {
/*
* Return Reply so that it can be used for the
* next command
*/
asr_set_FromFIFO(sc, ReplyOffset);
continue;
}
/* Welease Wadjah! (and stop timeouts) */
ASR_ccbRemove (sc, ccb);
dsc = I2O_SINGLE_REPLY_MESSAGE_FRAME_getDetailedStatusCode(
&(Reply->StdReplyFrame));
ccb->csio.scsi_status = dsc & I2O_SCSI_DEVICE_DSC_MASK;
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
switch (dsc) {
case I2O_SCSI_DSC_SUCCESS:
ccb->ccb_h.status |= CAM_REQ_CMP;
break;
case I2O_SCSI_DSC_CHECK_CONDITION:
ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR |
CAM_AUTOSNS_VALID;
break;
case I2O_SCSI_DSC_BUSY:
/* FALLTHRU */
case I2O_SCSI_HBA_DSC_ADAPTER_BUSY:
/* FALLTHRU */
case I2O_SCSI_HBA_DSC_SCSI_BUS_RESET:
/* FALLTHRU */
case I2O_SCSI_HBA_DSC_BUS_BUSY:
ccb->ccb_h.status |= CAM_SCSI_BUSY;
break;
case I2O_SCSI_HBA_DSC_SELECTION_TIMEOUT:
ccb->ccb_h.status |= CAM_SEL_TIMEOUT;
break;
case I2O_SCSI_HBA_DSC_COMMAND_TIMEOUT:
/* FALLTHRU */
case I2O_SCSI_HBA_DSC_DEVICE_NOT_PRESENT:
/* FALLTHRU */
case I2O_SCSI_HBA_DSC_LUN_INVALID:
/* FALLTHRU */
case I2O_SCSI_HBA_DSC_SCSI_TID_INVALID:
ccb->ccb_h.status |= CAM_CMD_TIMEOUT;
break;
case I2O_SCSI_HBA_DSC_DATA_OVERRUN:
/* FALLTHRU */
case I2O_SCSI_HBA_DSC_REQUEST_LENGTH_ERROR:
ccb->ccb_h.status |= CAM_DATA_RUN_ERR;
break;
default:
ccb->ccb_h.status |= CAM_REQUEUE_REQ;
break;
}
if ((ccb->csio.resid = ccb->csio.dxfer_len) != 0) {
ccb->csio.resid -=
I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME_getTransferCount(
Reply);
}
/* Sense data in reply packet */
if (ccb->ccb_h.status & CAM_AUTOSNS_VALID) {
u_int16_t size = I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME_getAutoSenseTransferCount(Reply);
if (size) {
if (size > sizeof(ccb->csio.sense_data)) {
size = sizeof(ccb->csio.sense_data);
}
if (size > I2O_SCSI_SENSE_DATA_SZ) {
size = I2O_SCSI_SENSE_DATA_SZ;
}
if ((ccb->csio.sense_len)
&& (size > ccb->csio.sense_len)) {
size = ccb->csio.sense_len;
}
if (size < ccb->csio.sense_len) {
ccb->csio.sense_resid =
ccb->csio.sense_len - size;
} else {
ccb->csio.sense_resid = 0;
}
bzero(&(ccb->csio.sense_data),
sizeof(ccb->csio.sense_data));
bcopy(Reply->SenseData,
&(ccb->csio.sense_data), size);
}
}
/*
* Return Reply so that it can be used for the next command
* since we have no more need for it now
*/
asr_set_FromFIFO(sc, ReplyOffset);
if (ccb->ccb_h.path) {
xpt_done ((union ccb *)ccb);
} else {
wakeup (ccb);
}
}
return (processed);
} /* asr_intr */
#undef QueueSize /* Grrrr */
#undef SG_Size /* Grrrr */
/*
* Meant to be included at the bottom of asr.c !!!
*/
/*
* Included here as hard coded. Done because other necessary include
* files utilize C++ comment structures which make them a nuisance to
* included here just to pick up these three typedefs.
*/
typedef U32 DPT_TAG_T;
typedef U32 DPT_MSG_T;
typedef U32 DPT_RTN_T;
#undef SCSI_RESET /* Conflicts with "scsi/scsiconf.h" defintion */
#include "dev/asr/osd_unix.h"
#define asr_unit(dev) dev2unit(dev)
static u_int8_t ASR_ctlr_held;
static int
asr_open(struct cdev *dev, int32_t flags, int32_t ifmt, struct thread *td)
{
int s;
int error;
if (dev->si_drv1 == NULL) {
return (ENODEV);
}
s = splcam ();
if (ASR_ctlr_held) {
error = EBUSY;
} else if ((error = priv_check(td, PRIV_DRIVER)) == 0) {
++ASR_ctlr_held;
}
splx(s);
return (error);
} /* asr_open */
static int
asr_close(struct cdev *dev, int flags, int ifmt, struct thread *td)
{
ASR_ctlr_held = 0;
return (0);
} /* asr_close */
/*-------------------------------------------------------------------------*/
/* Function ASR_queue_i */
/*-------------------------------------------------------------------------*/
/* The Parameters Passed To This Function Are : */
/* Asr_softc_t * : HBA miniport driver's adapter data storage. */
/* PI2O_MESSAGE_FRAME : Msg Structure Pointer For This Command */
/* I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME following the Msg Structure */
/* */
/* This Function Will Take The User Request Packet And Convert It To An */
/* I2O MSG And Send It Off To The Adapter. */
/* */
/* Return : 0 For OK, Error Code Otherwise */
/*-------------------------------------------------------------------------*/
static int
ASR_queue_i(Asr_softc_t *sc, PI2O_MESSAGE_FRAME Packet)
{
union asr_ccb * ccb;
PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME Reply;
PI2O_MESSAGE_FRAME Message_Ptr;
PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME Reply_Ptr;
int MessageSizeInBytes;
int ReplySizeInBytes;
int error;
int s;
/* Scatter Gather buffer list */
struct ioctlSgList_S {
SLIST_ENTRY(ioctlSgList_S) link;
caddr_t UserSpace;
I2O_FLAGS_COUNT FlagsCount;
char KernelSpace[sizeof(long)];
} * elm;
/* Generates a `first' entry */
SLIST_HEAD(ioctlSgListHead_S, ioctlSgList_S) sgList;
if (ASR_getBlinkLedCode(sc)) {
debug_usr_cmd_printf ("Adapter currently in BlinkLed %x\n",
ASR_getBlinkLedCode(sc));
return (EIO);
}
/* Copy in the message into a local allocation */
if ((Message_Ptr = (PI2O_MESSAGE_FRAME)malloc (
sizeof(I2O_MESSAGE_FRAME), M_TEMP, M_WAITOK)) == NULL) {
debug_usr_cmd_printf (
"Failed to acquire I2O_MESSAGE_FRAME memory\n");
return (ENOMEM);
}
if ((error = copyin ((caddr_t)Packet, (caddr_t)Message_Ptr,
sizeof(I2O_MESSAGE_FRAME))) != 0) {
free(Message_Ptr, M_TEMP);
debug_usr_cmd_printf ("Can't copy in packet errno=%d\n", error);
return (error);
}
/* Acquire information to determine type of packet */
MessageSizeInBytes = (I2O_MESSAGE_FRAME_getMessageSize(Message_Ptr)<<2);
/* The offset of the reply information within the user packet */
Reply = (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)((char *)Packet
+ MessageSizeInBytes);
/* Check if the message is a synchronous initialization command */
s = I2O_MESSAGE_FRAME_getFunction(Message_Ptr);
free(Message_Ptr, M_TEMP);
switch (s) {
case I2O_EXEC_IOP_RESET:
{ U32 status;
status = ASR_resetIOP(sc);
ReplySizeInBytes = sizeof(status);
debug_usr_cmd_printf ("resetIOP done\n");
return (copyout ((caddr_t)&status, (caddr_t)Reply,
ReplySizeInBytes));
}
case I2O_EXEC_STATUS_GET:
{ PI2O_EXEC_STATUS_GET_REPLY status;
status = &sc->ha_statusmem->status;
if (ASR_getStatus(sc) == NULL) {
debug_usr_cmd_printf ("getStatus failed\n");
return (ENXIO);
}
ReplySizeInBytes = sizeof(status);
debug_usr_cmd_printf ("getStatus done\n");
return (copyout ((caddr_t)status, (caddr_t)Reply,
ReplySizeInBytes));
}
case I2O_EXEC_OUTBOUND_INIT:
{ U32 status;
status = ASR_initOutBound(sc);
ReplySizeInBytes = sizeof(status);
debug_usr_cmd_printf ("intOutBound done\n");
return (copyout ((caddr_t)&status, (caddr_t)Reply,
ReplySizeInBytes));
}
}
/* Determine if the message size is valid */
if ((MessageSizeInBytes < sizeof(I2O_MESSAGE_FRAME))
|| (MAX_INBOUND_SIZE < MessageSizeInBytes)) {
debug_usr_cmd_printf ("Packet size %d incorrect\n",
MessageSizeInBytes);
return (EINVAL);
}
if ((Message_Ptr = (PI2O_MESSAGE_FRAME)malloc (MessageSizeInBytes,
M_TEMP, M_WAITOK)) == NULL) {
debug_usr_cmd_printf ("Failed to acquire frame[%d] memory\n",
MessageSizeInBytes);
return (ENOMEM);
}
if ((error = copyin ((caddr_t)Packet, (caddr_t)Message_Ptr,
MessageSizeInBytes)) != 0) {
free(Message_Ptr, M_TEMP);
debug_usr_cmd_printf ("Can't copy in packet[%d] errno=%d\n",
MessageSizeInBytes, error);
return (error);
}
/* Check the size of the reply frame, and start constructing */
if ((Reply_Ptr = (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)malloc (
sizeof(I2O_MESSAGE_FRAME), M_TEMP, M_WAITOK)) == NULL) {
free(Message_Ptr, M_TEMP);
debug_usr_cmd_printf (
"Failed to acquire I2O_MESSAGE_FRAME memory\n");
return (ENOMEM);
}
if ((error = copyin ((caddr_t)Reply, (caddr_t)Reply_Ptr,
sizeof(I2O_MESSAGE_FRAME))) != 0) {
free(Reply_Ptr, M_TEMP);
free(Message_Ptr, M_TEMP);
debug_usr_cmd_printf (
"Failed to copy in reply frame, errno=%d\n",
error);
return (error);
}
ReplySizeInBytes = (I2O_MESSAGE_FRAME_getMessageSize(
&(Reply_Ptr->StdReplyFrame.StdMessageFrame)) << 2);
free(Reply_Ptr, M_TEMP);
if (ReplySizeInBytes < sizeof(I2O_SINGLE_REPLY_MESSAGE_FRAME)) {
free(Message_Ptr, M_TEMP);
debug_usr_cmd_printf (
"Failed to copy in reply frame[%d], errno=%d\n",
ReplySizeInBytes, error);
return (EINVAL);
}
if ((Reply_Ptr = (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)malloc (
((ReplySizeInBytes > sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME))
? ReplySizeInBytes : sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)),
M_TEMP, M_WAITOK)) == NULL) {
free(Message_Ptr, M_TEMP);
debug_usr_cmd_printf ("Failed to acquire frame[%d] memory\n",
ReplySizeInBytes);
return (ENOMEM);
}
(void)ASR_fillMessage((void *)Reply_Ptr, ReplySizeInBytes);
Reply_Ptr->StdReplyFrame.StdMessageFrame.InitiatorContext
= Message_Ptr->InitiatorContext;
Reply_Ptr->StdReplyFrame.TransactionContext
= ((PI2O_PRIVATE_MESSAGE_FRAME)Message_Ptr)->TransactionContext;
I2O_MESSAGE_FRAME_setMsgFlags(
&(Reply_Ptr->StdReplyFrame.StdMessageFrame),
I2O_MESSAGE_FRAME_getMsgFlags(
&(Reply_Ptr->StdReplyFrame.StdMessageFrame))
| I2O_MESSAGE_FLAGS_REPLY);
/* Check if the message is a special case command */
switch (I2O_MESSAGE_FRAME_getFunction(Message_Ptr)) {
case I2O_EXEC_SYS_TAB_SET: /* Special Case of empty Scatter Gather */
if (MessageSizeInBytes == ((I2O_MESSAGE_FRAME_getVersionOffset(
Message_Ptr) & 0xF0) >> 2)) {
free(Message_Ptr, M_TEMP);
I2O_SINGLE_REPLY_MESSAGE_FRAME_setDetailedStatusCode(
&(Reply_Ptr->StdReplyFrame),
(ASR_setSysTab(sc) != CAM_REQ_CMP));
I2O_MESSAGE_FRAME_setMessageSize(
&(Reply_Ptr->StdReplyFrame.StdMessageFrame),
sizeof(I2O_SINGLE_REPLY_MESSAGE_FRAME));
error = copyout ((caddr_t)Reply_Ptr, (caddr_t)Reply,
ReplySizeInBytes);
free(Reply_Ptr, M_TEMP);
return (error);
}
}
/* Deal in the general case */
/* First allocate and optionally copy in each scatter gather element */
SLIST_INIT(&sgList);
if ((I2O_MESSAGE_FRAME_getVersionOffset(Message_Ptr) & 0xF0) != 0) {
PI2O_SGE_SIMPLE_ELEMENT sg;
/*
* since this code is reused in several systems, code
* efficiency is greater by using a shift operation rather
* than a divide by sizeof(u_int32_t).
*/
sg = (PI2O_SGE_SIMPLE_ELEMENT)((char *)Message_Ptr
+ ((I2O_MESSAGE_FRAME_getVersionOffset(Message_Ptr) & 0xF0)
>> 2));
while (sg < (PI2O_SGE_SIMPLE_ELEMENT)(((caddr_t)Message_Ptr)
+ MessageSizeInBytes)) {
caddr_t v;
int len;
if ((I2O_FLAGS_COUNT_getFlags(&(sg->FlagsCount))
& I2O_SGL_FLAGS_SIMPLE_ADDRESS_ELEMENT) == 0) {
error = EINVAL;
break;
}
len = I2O_FLAGS_COUNT_getCount(&(sg->FlagsCount));
debug_usr_cmd_printf ("SG[%d] = %x[%d]\n",
sg - (PI2O_SGE_SIMPLE_ELEMENT)((char *)Message_Ptr
+ ((I2O_MESSAGE_FRAME_getVersionOffset(
Message_Ptr) & 0xF0) >> 2)),
I2O_SGE_SIMPLE_ELEMENT_getPhysicalAddress(sg), len);
if ((elm = (struct ioctlSgList_S *)malloc (
sizeof(*elm) - sizeof(elm->KernelSpace) + len,
M_TEMP, M_WAITOK)) == NULL) {
debug_usr_cmd_printf (
"Failed to allocate SG[%d]\n", len);
error = ENOMEM;
break;
}
SLIST_INSERT_HEAD(&sgList, elm, link);
elm->FlagsCount = sg->FlagsCount;
elm->UserSpace = (caddr_t)
(I2O_SGE_SIMPLE_ELEMENT_getPhysicalAddress(sg));
v = elm->KernelSpace;
/* Copy in outgoing data (DIR bit could be invalid) */
if ((error = copyin (elm->UserSpace, (caddr_t)v, len))
!= 0) {
break;
}
/*
* If the buffer is not contiguous, lets
* break up the scatter/gather entries.
*/
while ((len > 0)
&& (sg < (PI2O_SGE_SIMPLE_ELEMENT)
(((caddr_t)Message_Ptr) + MAX_INBOUND_SIZE))) {
int next, base, span;
span = 0;
next = base = KVTOPHYS(v);
I2O_SGE_SIMPLE_ELEMENT_setPhysicalAddress(sg,
base);
/* How far can we go physically contiguously */
while ((len > 0) && (base == next)) {
int size;
next = trunc_page(base) + PAGE_SIZE;
size = next - base;
if (size > len) {
size = len;
}
span += size;
v += size;
len -= size;
base = KVTOPHYS(v);
}
/* Construct the Flags */
I2O_FLAGS_COUNT_setCount(&(sg->FlagsCount),
span);
{
int flags = I2O_FLAGS_COUNT_getFlags(
&(elm->FlagsCount));
/* Any remaining length? */
if (len > 0) {
flags &=
~(I2O_SGL_FLAGS_END_OF_BUFFER
| I2O_SGL_FLAGS_LAST_ELEMENT);
}
I2O_FLAGS_COUNT_setFlags(
&(sg->FlagsCount), flags);
}
debug_usr_cmd_printf ("sg[%d] = %x[%d]\n",
sg - (PI2O_SGE_SIMPLE_ELEMENT)
((char *)Message_Ptr
+ ((I2O_MESSAGE_FRAME_getVersionOffset(
Message_Ptr) & 0xF0) >> 2)),
I2O_SGE_SIMPLE_ELEMENT_getPhysicalAddress(sg),
span);
if (len <= 0) {
break;
}
/*
* Incrementing requires resizing of the
* packet, and moving up the existing SG
* elements.
*/
++sg;
MessageSizeInBytes += sizeof(*sg);
I2O_MESSAGE_FRAME_setMessageSize(Message_Ptr,
I2O_MESSAGE_FRAME_getMessageSize(Message_Ptr)
+ (sizeof(*sg) / sizeof(U32)));
{
PI2O_MESSAGE_FRAME NewMessage_Ptr;
if ((NewMessage_Ptr
= (PI2O_MESSAGE_FRAME)
malloc (MessageSizeInBytes,
M_TEMP, M_WAITOK)) == NULL) {
debug_usr_cmd_printf (
"Failed to acquire frame[%d] memory\n",
MessageSizeInBytes);
error = ENOMEM;
break;
}
span = ((caddr_t)sg)
- (caddr_t)Message_Ptr;
bcopy(Message_Ptr,NewMessage_Ptr, span);
bcopy((caddr_t)(sg-1),
((caddr_t)NewMessage_Ptr) + span,
MessageSizeInBytes - span);
free(Message_Ptr, M_TEMP);
sg = (PI2O_SGE_SIMPLE_ELEMENT)
(((caddr_t)NewMessage_Ptr) + span);
Message_Ptr = NewMessage_Ptr;
}
}
if ((error)
|| ((I2O_FLAGS_COUNT_getFlags(&(sg->FlagsCount))
& I2O_SGL_FLAGS_LAST_ELEMENT) != 0)) {
break;
}
++sg;
}
if (error) {
while ((elm = SLIST_FIRST(&sgList)) != NULL) {
SLIST_REMOVE_HEAD(&sgList, link);
free(elm, M_TEMP);
}
free(Reply_Ptr, M_TEMP);
free(Message_Ptr, M_TEMP);
return (error);
}
}
debug_usr_cmd_printf ("Inbound: ");
debug_usr_cmd_dump_message(Message_Ptr);
/* Send the command */
if ((ccb = asr_alloc_ccb (sc)) == NULL) {
/* Free up in-kernel buffers */
while ((elm = SLIST_FIRST(&sgList)) != NULL) {
SLIST_REMOVE_HEAD(&sgList, link);
free(elm, M_TEMP);
}
free(Reply_Ptr, M_TEMP);
free(Message_Ptr, M_TEMP);
return (ENOMEM);
}
/*
* We do not need any (optional byteswapping) method access to
* the Initiator context field.
*/
I2O_MESSAGE_FRAME_setInitiatorContext64(
(PI2O_MESSAGE_FRAME)Message_Ptr, (long)ccb);
(void)ASR_queue (sc, (PI2O_MESSAGE_FRAME)Message_Ptr);
free(Message_Ptr, M_TEMP);
/*
* Wait for the board to report a finished instruction.
*/
s = splcam();
while ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG) {
if (ASR_getBlinkLedCode(sc)) {
/* Reset Adapter */
printf ("asr%d: Blink LED 0x%x resetting adapter\n",
cam_sim_unit(xpt_path_sim(ccb->ccb_h.path)),
ASR_getBlinkLedCode(sc));
if (ASR_reset (sc) == ENXIO) {
/* Command Cleanup */
ASR_ccbRemove(sc, ccb);
}
splx(s);
/* Free up in-kernel buffers */
while ((elm = SLIST_FIRST(&sgList)) != NULL) {
SLIST_REMOVE_HEAD(&sgList, link);
free(elm, M_TEMP);
}
free(Reply_Ptr, M_TEMP);
asr_free_ccb(ccb);
return (EIO);
}
/* Check every second for BlinkLed */
/* There is no PRICAM, but outwardly PRIBIO is functional */
tsleep(ccb, PRIBIO, "asr", hz);
}
splx(s);
debug_usr_cmd_printf ("Outbound: ");
debug_usr_cmd_dump_message(Reply_Ptr);
I2O_SINGLE_REPLY_MESSAGE_FRAME_setDetailedStatusCode(
&(Reply_Ptr->StdReplyFrame),
(ccb->ccb_h.status != CAM_REQ_CMP));
if (ReplySizeInBytes >= (sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)
- I2O_SCSI_SENSE_DATA_SZ - sizeof(U32))) {
I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME_setTransferCount(Reply_Ptr,
ccb->csio.dxfer_len - ccb->csio.resid);
}
if ((ccb->ccb_h.status & CAM_AUTOSNS_VALID) && (ReplySizeInBytes
> (sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)
- I2O_SCSI_SENSE_DATA_SZ))) {
int size = ReplySizeInBytes
- sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)
- I2O_SCSI_SENSE_DATA_SZ;
if (size > sizeof(ccb->csio.sense_data)) {
size = sizeof(ccb->csio.sense_data);
}
if (size < ccb->csio.sense_len) {
ccb->csio.sense_resid = ccb->csio.sense_len - size;
} else {
ccb->csio.sense_resid = 0;
}
bzero(&(ccb->csio.sense_data), sizeof(ccb->csio.sense_data));
bcopy(&(ccb->csio.sense_data), Reply_Ptr->SenseData, size);
I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME_setAutoSenseTransferCount(
Reply_Ptr, size);
}
/* Free up in-kernel buffers */
while ((elm = SLIST_FIRST(&sgList)) != NULL) {
/* Copy out as necessary */
if ((error == 0)
/* DIR bit considered `valid', error due to ignorance works */
&& ((I2O_FLAGS_COUNT_getFlags(&(elm->FlagsCount))
& I2O_SGL_FLAGS_DIR) == 0)) {
error = copyout((caddr_t)(elm->KernelSpace),
elm->UserSpace,
I2O_FLAGS_COUNT_getCount(&(elm->FlagsCount)));
}
SLIST_REMOVE_HEAD(&sgList, link);
free(elm, M_TEMP);
}
if (error == 0) {
/* Copy reply frame to user space */
error = copyout((caddr_t)Reply_Ptr, (caddr_t)Reply,
ReplySizeInBytes);
}
free(Reply_Ptr, M_TEMP);
asr_free_ccb(ccb);
return (error);
} /* ASR_queue_i */
/*----------------------------------------------------------------------*/
/* Function asr_ioctl */
/*----------------------------------------------------------------------*/
/* The parameters passed to this function are : */
/* dev : Device number. */
/* cmd : Ioctl Command */
/* data : User Argument Passed In. */
/* flag : Mode Parameter */
/* proc : Process Parameter */
/* */
/* This function is the user interface into this adapter driver */
/* */
/* Return : zero if OK, error code if not */
/*----------------------------------------------------------------------*/
static int
asr_ioctl(struct cdev *dev, u_long cmd, caddr_t data, int flag, struct thread *td)
{
Asr_softc_t *sc = dev->si_drv1;
int i, error = 0;
#ifdef ASR_IOCTL_COMPAT
int j;
#endif /* ASR_IOCTL_COMPAT */
if (sc != NULL)
switch(cmd) {
case DPT_SIGNATURE:
#ifdef ASR_IOCTL_COMPAT
#if (dsDescription_size != 50)
case DPT_SIGNATURE + ((50 - dsDescription_size) << 16):
#endif
if (cmd & 0xFFFF0000) {
bcopy(&ASR_sig, data, sizeof(dpt_sig_S));
return (0);
}
/* Traditional version of the ioctl interface */
case DPT_SIGNATURE & 0x0000FFFF:
#endif
return (copyout((caddr_t)(&ASR_sig), *((caddr_t *)data),
sizeof(dpt_sig_S)));
/* Traditional version of the ioctl interface */
case DPT_CTRLINFO & 0x0000FFFF:
case DPT_CTRLINFO: {
struct {
u_int16_t length;
u_int16_t drvrHBAnum;
u_int32_t baseAddr;
u_int16_t blinkState;
u_int8_t pciBusNum;
u_int8_t pciDeviceNum;
u_int16_t hbaFlags;
u_int16_t Interrupt;
u_int32_t reserved1;
u_int32_t reserved2;
u_int32_t reserved3;
} CtlrInfo;
bzero(&CtlrInfo, sizeof(CtlrInfo));
CtlrInfo.length = sizeof(CtlrInfo) - sizeof(u_int16_t);
CtlrInfo.drvrHBAnum = asr_unit(dev);
CtlrInfo.baseAddr = sc->ha_Base;
i = ASR_getBlinkLedCode (sc);
if (i == -1)
i = 0;
CtlrInfo.blinkState = i;
CtlrInfo.pciBusNum = sc->ha_pciBusNum;
CtlrInfo.pciDeviceNum = sc->ha_pciDeviceNum;
#define FLG_OSD_PCI_VALID 0x0001
#define FLG_OSD_DMA 0x0002
#define FLG_OSD_I2O 0x0004
CtlrInfo.hbaFlags = FLG_OSD_PCI_VALID|FLG_OSD_DMA|FLG_OSD_I2O;
CtlrInfo.Interrupt = sc->ha_irq;
#ifdef ASR_IOCTL_COMPAT
if (cmd & 0xffff0000)
bcopy(&CtlrInfo, data, sizeof(CtlrInfo));
else
#endif /* ASR_IOCTL_COMPAT */
error = copyout(&CtlrInfo, *(caddr_t *)data, sizeof(CtlrInfo));
} return (error);
/* Traditional version of the ioctl interface */
case DPT_SYSINFO & 0x0000FFFF:
case DPT_SYSINFO: {
sysInfo_S Info;
#ifdef ASR_IOCTL_COMPAT
char * cp;
/* Kernel Specific ptok `hack' */
#define ptok(a) ((char *)(uintptr_t)(a) + KERNBASE)
bzero(&Info, sizeof(Info));
/* Appears I am the only person in the Kernel doing this */
outb (0x70, 0x12);
i = inb(0x71);
j = i >> 4;
if (i == 0x0f) {
outb (0x70, 0x19);
j = inb (0x71);
}
Info.drive0CMOS = j;
j = i & 0x0f;
if (i == 0x0f) {
outb (0x70, 0x1a);
j = inb (0x71);
}
Info.drive1CMOS = j;
Info.numDrives = *((char *)ptok(0x475));
#else /* ASR_IOCTL_COMPAT */
bzero(&Info, sizeof(Info));
#endif /* ASR_IOCTL_COMPAT */
Info.processorFamily = ASR_sig.dsProcessorFamily;
#if defined(__i386__)
switch (cpu) {
case CPU_386SX: case CPU_386:
Info.processorType = PROC_386; break;
case CPU_486SX: case CPU_486:
Info.processorType = PROC_486; break;
case CPU_586:
Info.processorType = PROC_PENTIUM; break;
case CPU_686:
Info.processorType = PROC_SEXIUM; break;
}
#endif
Info.osType = OS_BSDI_UNIX;
Info.osMajorVersion = osrelease[0] - '0';
Info.osMinorVersion = osrelease[2] - '0';
/* Info.osRevision = 0; */
/* Info.osSubRevision = 0; */
Info.busType = SI_PCI_BUS;
Info.flags = SI_OSversionValid|SI_BusTypeValid|SI_NO_SmartROM;
#ifdef ASR_IOCTL_COMPAT
Info.flags |= SI_CMOS_Valid | SI_NumDrivesValid;
/* Go Out And Look For I2O SmartROM */
for(j = 0xC8000; j < 0xE0000; j += 2048) {
int k;
cp = ptok(j);
if (*((unsigned short *)cp) != 0xAA55) {
continue;
}
j += (cp[2] * 512) - 2048;
if ((*((u_long *)(cp + 6))
!= ('S' + (' ' * 256) + (' ' * 65536L)))
|| (*((u_long *)(cp + 10))
!= ('I' + ('2' * 256) + ('0' * 65536L)))) {
continue;
}
cp += 0x24;
for (k = 0; k < 64; ++k) {
if (*((unsigned short *)cp)
== (' ' + ('v' * 256))) {
break;
}
}
if (k < 64) {
Info.smartROMMajorVersion
= *((unsigned char *)(cp += 4)) - '0';
Info.smartROMMinorVersion
= *((unsigned char *)(cp += 2));
Info.smartROMRevision
= *((unsigned char *)(++cp));
Info.flags |= SI_SmartROMverValid;
Info.flags &= ~SI_NO_SmartROM;
break;
}
}
/* Get The Conventional Memory Size From CMOS */
outb (0x70, 0x16);
j = inb (0x71);
j <<= 8;
outb (0x70, 0x15);
j |= inb(0x71);
Info.conventionalMemSize = j;
/* Get The Extended Memory Found At Power On From CMOS */
outb (0x70, 0x31);
j = inb (0x71);
j <<= 8;
outb (0x70, 0x30);
j |= inb(0x71);
Info.extendedMemSize = j;
Info.flags |= SI_MemorySizeValid;
/* Copy Out The Info Structure To The User */
if (cmd & 0xFFFF0000)
bcopy(&Info, data, sizeof(Info));
else
#endif /* ASR_IOCTL_COMPAT */
error = copyout(&Info, *(caddr_t *)data, sizeof(Info));
return (error); }
/* Get The BlinkLED State */
case DPT_BLINKLED:
i = ASR_getBlinkLedCode (sc);
if (i == -1)
i = 0;
#ifdef ASR_IOCTL_COMPAT
if (cmd & 0xffff0000)
bcopy(&i, data, sizeof(i));
else
#endif /* ASR_IOCTL_COMPAT */
error = copyout(&i, *(caddr_t *)data, sizeof(i));
break;
/* Send an I2O command */
case I2OUSRCMD:
return (ASR_queue_i(sc, *((PI2O_MESSAGE_FRAME *)data)));
/* Reset and re-initialize the adapter */
case I2ORESETCMD:
return (ASR_reset(sc));
/* Rescan the LCT table and resynchronize the information */
case I2ORESCANCMD:
return (ASR_rescan(sc));
}
return (EINVAL);
} /* asr_ioctl */
Reference in New Issue View Git Blame Copy Permalink