freebsd-dev/sys/dev/drm/mga_irq.c
Robert Noland 51e39089c9 Initialize the vblank structures at load time. Previously we did this
at irq install/uninstall time, but when we vt switch, we uninstall the
irq handler.  When the irq handler is reinstalled, the modeset ioctl
happens first.  The modeset ioctl is supposed to tell us that we can
disable vblank interrupts if there are no active consumers.  This will
fail after a vt switch until another modeset ioctl is called via dpms
or xrandr.  Leading to cases where either interrupts are on and can't
be disabled, or worse, no interrupts at all.

MFC after:	2 weeks
2009-02-28 02:37:55 +00:00

181 lines
4.9 KiB
C

/* mga_irq.c -- IRQ handling for radeon -*- linux-c -*-
*/
/*-
* Copyright (C) The Weather Channel, Inc. 2002. All Rights Reserved.
*
* The Weather Channel (TM) funded Tungsten Graphics to develop the
* initial release of the Radeon 8500 driver under the XFree86 license.
* This notice must be preserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Authors:
* Keith Whitwell <keith@tungstengraphics.com>
* Eric Anholt <anholt@FreeBSD.org>
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "dev/drm/drmP.h"
#include "dev/drm/drm.h"
#include "dev/drm/mga_drm.h"
#include "dev/drm/mga_drv.h"
u32 mga_get_vblank_counter(struct drm_device *dev, int crtc)
{
const drm_mga_private_t *const dev_priv =
(drm_mga_private_t *) dev->dev_private;
if (crtc != 0) {
return 0;
}
return atomic_read(&dev_priv->vbl_received);
}
irqreturn_t mga_driver_irq_handler(DRM_IRQ_ARGS)
{
struct drm_device *dev = (struct drm_device *) arg;
drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
int status;
int handled = 0;
status = MGA_READ(MGA_STATUS);
/* VBLANK interrupt */
if (status & MGA_VLINEPEN) {
MGA_WRITE(MGA_ICLEAR, MGA_VLINEICLR);
atomic_inc(&dev_priv->vbl_received);
drm_handle_vblank(dev, 0);
handled = 1;
}
/* SOFTRAP interrupt */
if (status & MGA_SOFTRAPEN) {
const u32 prim_start = MGA_READ(MGA_PRIMADDRESS);
const u32 prim_end = MGA_READ(MGA_PRIMEND);
MGA_WRITE(MGA_ICLEAR, MGA_SOFTRAPICLR);
/* In addition to clearing the interrupt-pending bit, we
* have to write to MGA_PRIMEND to re-start the DMA operation.
*/
if ((prim_start & ~0x03) != (prim_end & ~0x03)) {
MGA_WRITE(MGA_PRIMEND, prim_end);
}
atomic_inc(&dev_priv->last_fence_retired);
DRM_WAKEUP(&dev_priv->fence_queue);
handled = 1;
}
if (handled)
return IRQ_HANDLED;
return IRQ_NONE;
}
int mga_enable_vblank(struct drm_device *dev, int crtc)
{
drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
if (crtc != 0) {
DRM_ERROR("tried to enable vblank on non-existent crtc %d\n",
crtc);
return 0;
}
MGA_WRITE(MGA_IEN, MGA_VLINEIEN | MGA_SOFTRAPEN);
return 0;
}
void mga_disable_vblank(struct drm_device *dev, int crtc)
{
if (crtc != 0) {
DRM_ERROR("tried to disable vblank on non-existent crtc %d\n",
crtc);
}
/* Do *NOT* disable the vertical refresh interrupt. MGA doesn't have
* a nice hardware counter that tracks the number of refreshes when
* the interrupt is disabled, and the kernel doesn't know the refresh
* rate to calculate an estimate.
*/
/* MGA_WRITE(MGA_IEN, MGA_VLINEIEN | MGA_SOFTRAPEN); */
}
int mga_driver_fence_wait(struct drm_device * dev, unsigned int *sequence)
{
drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
unsigned int cur_fence;
int ret = 0;
/* Assume that the user has missed the current sequence number
* by about a day rather than she wants to wait for years
* using fences.
*/
DRM_WAIT_ON(ret, dev_priv->fence_queue, 3 * DRM_HZ,
(((cur_fence = atomic_read(&dev_priv->last_fence_retired))
- *sequence) <= (1 << 23)));
*sequence = cur_fence;
return ret;
}
void mga_driver_irq_preinstall(struct drm_device * dev)
{
drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
/* Disable *all* interrupts */
MGA_WRITE(MGA_IEN, 0);
/* Clear bits if they're already high */
MGA_WRITE(MGA_ICLEAR, ~0);
}
int mga_driver_irq_postinstall(struct drm_device * dev)
{
drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
DRM_INIT_WAITQUEUE(&dev_priv->fence_queue);
/* Turn on soft trap interrupt. Vertical blank interrupts are enabled
* in mga_enable_vblank.
*/
MGA_WRITE(MGA_IEN, MGA_SOFTRAPEN);
return 0;
}
void mga_driver_irq_uninstall(struct drm_device * dev)
{
drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
if (!dev_priv)
return;
/* Disable *all* interrupts */
MGA_WRITE(MGA_IEN, 0);
dev->irq_enabled = 0;
}