freebsd-dev/sys/i386/isa/apic_vector.s

578 lines
14 KiB
ArmAsm

/*
* from: vector.s, 386BSD 0.1 unknown origin
* $FreeBSD$
*/
#include <machine/apic.h>
#include <machine/smp.h>
/* convert an absolute IRQ# into a bitmask */
#define IRQ_BIT(irq_num) (1 << (irq_num))
/* make an index into the IO APIC from the IRQ# */
#define REDTBL_IDX(irq_num) (0x10 + ((irq_num) * 2))
/*
*
*/
#define PUSH_FRAME \
pushl $0 ; /* dummy error code */ \
pushl $0 ; /* dummy trap type */ \
pushal ; /* 8 ints */ \
pushl %ds ; /* save data and extra segments ... */ \
pushl %es ; \
pushl %fs
#define PUSH_DUMMY \
pushfl ; /* eflags */ \
pushl %cs ; /* cs */ \
pushl 12(%esp) ; /* original caller eip */ \
pushl $0 ; /* dummy error code */ \
pushl $0 ; /* dummy trap type */ \
subl $11*4,%esp ;
#define POP_FRAME \
popl %fs ; \
popl %es ; \
popl %ds ; \
popal ; \
addl $4+4,%esp
#define POP_DUMMY \
addl $16*4,%esp
#define IOAPICADDR(irq_num) CNAME(int_to_apicintpin) + 16 * (irq_num) + 8
#define REDIRIDX(irq_num) CNAME(int_to_apicintpin) + 16 * (irq_num) + 12
#define MASK_IRQ(irq_num) \
ICU_LOCK ; /* into critical reg */ \
testl $IRQ_BIT(irq_num), apic_imen ; \
jne 7f ; /* masked, don't mask */ \
orl $IRQ_BIT(irq_num), apic_imen ; /* set the mask bit */ \
movl IOAPICADDR(irq_num), %ecx ; /* ioapic addr */ \
movl REDIRIDX(irq_num), %eax ; /* get the index */ \
movl %eax, (%ecx) ; /* write the index */ \
movl IOAPIC_WINDOW(%ecx), %eax ; /* current value */ \
orl $IOART_INTMASK, %eax ; /* set the mask */ \
movl %eax, IOAPIC_WINDOW(%ecx) ; /* new value */ \
7: ; /* already masked */ \
ICU_UNLOCK
/*
* Test to see whether we are handling an edge or level triggered INT.
* Level-triggered INTs must still be masked as we don't clear the source,
* and the EOI cycle would cause redundant INTs to occur.
*/
#define MASK_LEVEL_IRQ(irq_num) \
testl $IRQ_BIT(irq_num), apic_pin_trigger ; \
jz 9f ; /* edge, don't mask */ \
MASK_IRQ(irq_num) ; \
9:
#ifdef APIC_INTR_REORDER
#define EOI_IRQ(irq_num) \
movl apic_isrbit_location + 8 * (irq_num), %eax ; \
movl (%eax), %eax ; \
testl apic_isrbit_location + 4 + 8 * (irq_num), %eax ; \
jz 9f ; /* not active */ \
movl $0, lapic+LA_EOI ; \
9:
#else
#define EOI_IRQ(irq_num) \
testl $IRQ_BIT(irq_num), lapic+LA_ISR1; \
jz 9f ; /* not active */ \
movl $0, lapic+LA_EOI; \
9:
#endif
/*
* Test to see if the source is currently masked, clear if so.
*/
#define UNMASK_IRQ(irq_num) \
ICU_LOCK ; /* into critical reg */ \
testl $IRQ_BIT(irq_num), apic_imen ; \
je 7f ; /* bit clear, not masked */ \
andl $~IRQ_BIT(irq_num), apic_imen ;/* clear mask bit */ \
movl IOAPICADDR(irq_num), %ecx ; /* ioapic addr */ \
movl REDIRIDX(irq_num), %eax ; /* get the index */ \
movl %eax, (%ecx) ; /* write the index */ \
movl IOAPIC_WINDOW(%ecx), %eax ; /* current value */ \
andl $~IOART_INTMASK, %eax ; /* clear the mask */ \
movl %eax, IOAPIC_WINDOW(%ecx) ; /* new value */ \
7: ; /* already unmasked */ \
ICU_UNLOCK
/*
* Test to see whether we are handling an edge or level triggered INT.
* Level-triggered INTs have to be unmasked.
*/
#define UNMASK_LEVEL_IRQ(irq_num) \
testl $IRQ_BIT(irq_num), apic_pin_trigger ; \
jz 9f ; /* edge, don't unmask */ \
UNMASK_IRQ(irq_num) ; \
9:
/*
* Macros for interrupt entry, call to handler, and exit.
*/
#define FAST_INTR(irq_num, vec_name) \
.text ; \
SUPERALIGN_TEXT ; \
IDTVEC(vec_name) ; \
PUSH_FRAME ; \
movl $KDSEL,%eax ; \
mov %ax,%ds ; \
mov %ax,%es ; \
movl $KPSEL,%eax ; \
mov %ax,%fs ; \
FAKE_MCOUNT(13*4(%esp)) ; \
movl PCPU(CURTHREAD),%ebx ; \
cmpl $0,TD_CRITNEST(%ebx) ; \
je 1f ; \
; \
movl $1,PCPU(INT_PENDING) ; \
orl $IRQ_BIT(irq_num),PCPU(FPENDING) ; \
MASK_LEVEL_IRQ(irq_num) ; \
movl $0, lapic+LA_EOI ; \
jmp 10f ; \
1: ; \
incl TD_CRITNEST(%ebx) ; \
incl TD_INTR_NESTING_LEVEL(%ebx) ; \
pushl intr_unit + (irq_num) * 4 ; \
call *intr_handler + (irq_num) * 4 ; /* do the work ASAP */ \
addl $4, %esp ; \
movl $0, lapic+LA_EOI ; \
lock ; \
incl cnt+V_INTR ; /* book-keeping can wait */ \
movl intr_countp + (irq_num) * 4, %eax ; \
lock ; \
incl (%eax) ; \
decl TD_CRITNEST(%ebx) ; \
cmpl $0,PCPU(INT_PENDING) ; \
je 2f ; \
; \
call i386_unpend ; \
2: ; \
decl TD_INTR_NESTING_LEVEL(%ebx) ; \
10: ; \
MEXITCOUNT ; \
jmp doreti
/*
* Restart a fast interrupt that was held up by a critical section.
* This routine is called from unpend(). unpend() ensures we are
* in a critical section and deals with the interrupt nesting level
* for us. If we previously masked the irq, we have to unmask it.
*
* We have a choice. We can regenerate the irq using the 'int'
* instruction or we can create a dummy frame and call the interrupt
* handler directly. I've chosen to use the dummy-frame method.
*/
#define FAST_UNPEND(irq_num, vec_name) \
.text ; \
SUPERALIGN_TEXT ; \
IDTVEC(vec_name) ; \
; \
pushl %ebp ; \
movl %esp, %ebp ; \
PUSH_DUMMY ; \
pushl intr_unit + (irq_num) * 4 ; \
call *intr_handler + (irq_num) * 4 ; /* do the work ASAP */ \
addl $4, %esp ; \
lock ; \
incl cnt+V_INTR ; /* book-keeping can wait */ \
movl intr_countp + (irq_num) * 4, %eax ; \
lock ; \
incl (%eax) ; \
UNMASK_LEVEL_IRQ(irq_num) ; \
POP_DUMMY ; \
popl %ebp ; \
ret ; \
/*
* Slow, threaded interrupts.
*
* XXX Most of the parameters here are obsolete. Fix this when we're
* done.
* XXX we really shouldn't return via doreti if we just schedule the
* interrupt handler and don't run anything. We could just do an
* iret. FIXME.
*/
#define INTR(irq_num, vec_name, maybe_extra_ipending) \
.text ; \
SUPERALIGN_TEXT ; \
/* _XintrNN: entry point used by IDT/HWIs via _vec[]. */ \
IDTVEC(vec_name) ; \
PUSH_FRAME ; \
movl $KDSEL, %eax ; /* reload with kernel's data segment */ \
mov %ax, %ds ; \
mov %ax, %es ; \
movl $KPSEL, %eax ; \
mov %ax, %fs ; \
; \
maybe_extra_ipending ; \
; \
MASK_LEVEL_IRQ(irq_num) ; \
EOI_IRQ(irq_num) ; \
; \
movl PCPU(CURTHREAD),%ebx ; \
cmpl $0,TD_CRITNEST(%ebx) ; \
je 1f ; \
movl $1,PCPU(INT_PENDING) ; \
orl $IRQ_BIT(irq_num),PCPU(IPENDING) ; \
jmp 10f ; \
1: ; \
incl TD_INTR_NESTING_LEVEL(%ebx) ; \
; \
FAKE_MCOUNT(13*4(%esp)) ; /* XXX avoid dbl cnt */ \
cmpl $0,PCPU(INT_PENDING) ; \
je 9f ; \
call i386_unpend ; \
9: ; \
pushl $irq_num; /* pass the IRQ */ \
call sched_ithd ; \
addl $4, %esp ; /* discard the parameter */ \
; \
decl TD_INTR_NESTING_LEVEL(%ebx) ; \
10: ; \
MEXITCOUNT ; \
jmp doreti
/*
* Handle "spurious INTerrupts".
* Notes:
* This is different than the "spurious INTerrupt" generated by an
* 8259 PIC for missing INTs. See the APIC documentation for details.
* This routine should NOT do an 'EOI' cycle.
*/
.text
SUPERALIGN_TEXT
.globl Xspuriousint
Xspuriousint:
/* No EOI cycle used here */
iret
/*
* Handle TLB shootdowns.
*/
.text
SUPERALIGN_TEXT
.globl Xinvltlb
Xinvltlb:
pushl %eax
#ifdef COUNT_XINVLTLB_HITS
pushl %fs
movl $KPSEL, %eax
mov %ax, %fs
movl PCPU(CPUID), %eax
popl %fs
ss
incl xhits(,%eax,4)
#endif /* COUNT_XINVLTLB_HITS */
movl %cr3, %eax /* invalidate the TLB */
movl %eax, %cr3
ss /* stack segment, avoid %ds load */
movl $0, lapic+LA_EOI /* End Of Interrupt to APIC */
popl %eax
iret
/*
* Forward hardclock to another CPU. Pushes a trapframe and calls
* forwarded_hardclock().
*/
.text
SUPERALIGN_TEXT
.globl Xhardclock
Xhardclock:
PUSH_FRAME
movl $KDSEL, %eax /* reload with kernel's data segment */
mov %ax, %ds
mov %ax, %es
movl $KPSEL, %eax
mov %ax, %fs
movl $0, lapic+LA_EOI /* End Of Interrupt to APIC */
movl PCPU(CURTHREAD),%ebx
cmpl $0,TD_CRITNEST(%ebx)
je 1f
movl $1,PCPU(INT_PENDING)
orl $1,PCPU(SPENDING);
jmp 10f
1:
incl TD_INTR_NESTING_LEVEL(%ebx)
call forwarded_hardclock
decl TD_INTR_NESTING_LEVEL(%ebx)
10:
MEXITCOUNT
jmp doreti
/*
* Forward statclock to another CPU. Pushes a trapframe and calls
* forwarded_statclock().
*/
.text
SUPERALIGN_TEXT
.globl Xstatclock
Xstatclock:
PUSH_FRAME
movl $KDSEL, %eax /* reload with kernel's data segment */
mov %ax, %ds
mov %ax, %es
movl $KPSEL, %eax
mov %ax, %fs
movl $0, lapic+LA_EOI /* End Of Interrupt to APIC */
FAKE_MCOUNT(13*4(%esp))
movl PCPU(CURTHREAD),%ebx
cmpl $0,TD_CRITNEST(%ebx)
je 1f
movl $1,PCPU(INT_PENDING)
orl $2,PCPU(SPENDING);
jmp 10f
1:
incl TD_INTR_NESTING_LEVEL(%ebx)
call forwarded_statclock
decl TD_INTR_NESTING_LEVEL(%ebx)
10:
MEXITCOUNT
jmp doreti
/*
* Executed by a CPU when it receives an Xcpuast IPI from another CPU,
*
* The other CPU has already executed aston() or need_resched() on our
* current process, so we simply need to ack the interrupt and return
* via doreti to run ast().
*/
.text
SUPERALIGN_TEXT
.globl Xcpuast
Xcpuast:
PUSH_FRAME
movl $KDSEL, %eax
mov %ax, %ds /* use KERNEL data segment */
mov %ax, %es
movl $KPSEL, %eax
mov %ax, %fs
movl $0, lapic+LA_EOI /* End Of Interrupt to APIC */
FAKE_MCOUNT(13*4(%esp))
MEXITCOUNT
jmp doreti
/*
* Executed by a CPU when it receives an Xcpustop IPI from another CPU,
*
* - Signals its receipt.
* - Waits for permission to restart.
* - Signals its restart.
*/
.text
SUPERALIGN_TEXT
.globl Xcpustop
Xcpustop:
pushl %ebp
movl %esp, %ebp
pushl %eax
pushl %ecx
pushl %edx
pushl %ds /* save current data segment */
pushl %fs
movl $KDSEL, %eax
mov %ax, %ds /* use KERNEL data segment */
movl $KPSEL, %eax
mov %ax, %fs
movl $0, lapic+LA_EOI /* End Of Interrupt to APIC */
movl PCPU(CPUID), %eax
imull $PCB_SIZE, %eax
leal CNAME(stoppcbs)(%eax), %eax
pushl %eax
call CNAME(savectx) /* Save process context */
addl $4, %esp
movl PCPU(CPUID), %eax
lock
btsl %eax, CNAME(stopped_cpus) /* stopped_cpus |= (1<<id) */
1:
btl %eax, CNAME(started_cpus) /* while (!(started_cpus & (1<<id))) */
jnc 1b
lock
btrl %eax, CNAME(started_cpus) /* started_cpus &= ~(1<<id) */
lock
btrl %eax, CNAME(stopped_cpus) /* stopped_cpus &= ~(1<<id) */
test %eax, %eax
jnz 2f
movl CNAME(cpustop_restartfunc), %eax
test %eax, %eax
jz 2f
movl $0, CNAME(cpustop_restartfunc) /* One-shot */
call *%eax
2:
popl %fs
popl %ds /* restore previous data segment */
popl %edx
popl %ecx
popl %eax
movl %ebp, %esp
popl %ebp
iret
MCOUNT_LABEL(bintr)
FAST_INTR(0,fastintr0)
FAST_INTR(1,fastintr1)
FAST_INTR(2,fastintr2)
FAST_INTR(3,fastintr3)
FAST_INTR(4,fastintr4)
FAST_INTR(5,fastintr5)
FAST_INTR(6,fastintr6)
FAST_INTR(7,fastintr7)
FAST_INTR(8,fastintr8)
FAST_INTR(9,fastintr9)
FAST_INTR(10,fastintr10)
FAST_INTR(11,fastintr11)
FAST_INTR(12,fastintr12)
FAST_INTR(13,fastintr13)
FAST_INTR(14,fastintr14)
FAST_INTR(15,fastintr15)
FAST_INTR(16,fastintr16)
FAST_INTR(17,fastintr17)
FAST_INTR(18,fastintr18)
FAST_INTR(19,fastintr19)
FAST_INTR(20,fastintr20)
FAST_INTR(21,fastintr21)
FAST_INTR(22,fastintr22)
FAST_INTR(23,fastintr23)
FAST_INTR(24,fastintr24)
FAST_INTR(25,fastintr25)
FAST_INTR(26,fastintr26)
FAST_INTR(27,fastintr27)
FAST_INTR(28,fastintr28)
FAST_INTR(29,fastintr29)
FAST_INTR(30,fastintr30)
FAST_INTR(31,fastintr31)
#define CLKINTR_PENDING movl $1,CNAME(clkintr_pending)
/* Threaded interrupts */
INTR(0,intr0, CLKINTR_PENDING)
INTR(1,intr1,)
INTR(2,intr2,)
INTR(3,intr3,)
INTR(4,intr4,)
INTR(5,intr5,)
INTR(6,intr6,)
INTR(7,intr7,)
INTR(8,intr8,)
INTR(9,intr9,)
INTR(10,intr10,)
INTR(11,intr11,)
INTR(12,intr12,)
INTR(13,intr13,)
INTR(14,intr14,)
INTR(15,intr15,)
INTR(16,intr16,)
INTR(17,intr17,)
INTR(18,intr18,)
INTR(19,intr19,)
INTR(20,intr20,)
INTR(21,intr21,)
INTR(22,intr22,)
INTR(23,intr23,)
INTR(24,intr24,)
INTR(25,intr25,)
INTR(26,intr26,)
INTR(27,intr27,)
INTR(28,intr28,)
INTR(29,intr29,)
INTR(30,intr30,)
INTR(31,intr31,)
FAST_UNPEND(0,fastunpend0)
FAST_UNPEND(1,fastunpend1)
FAST_UNPEND(2,fastunpend2)
FAST_UNPEND(3,fastunpend3)
FAST_UNPEND(4,fastunpend4)
FAST_UNPEND(5,fastunpend5)
FAST_UNPEND(6,fastunpend6)
FAST_UNPEND(7,fastunpend7)
FAST_UNPEND(8,fastunpend8)
FAST_UNPEND(9,fastunpend9)
FAST_UNPEND(10,fastunpend10)
FAST_UNPEND(11,fastunpend11)
FAST_UNPEND(12,fastunpend12)
FAST_UNPEND(13,fastunpend13)
FAST_UNPEND(14,fastunpend14)
FAST_UNPEND(15,fastunpend15)
FAST_UNPEND(16,fastunpend16)
FAST_UNPEND(17,fastunpend17)
FAST_UNPEND(18,fastunpend18)
FAST_UNPEND(19,fastunpend19)
FAST_UNPEND(20,fastunpend20)
FAST_UNPEND(21,fastunpend21)
FAST_UNPEND(22,fastunpend22)
FAST_UNPEND(23,fastunpend23)
FAST_UNPEND(24,fastunpend24)
FAST_UNPEND(25,fastunpend25)
FAST_UNPEND(26,fastunpend26)
FAST_UNPEND(27,fastunpend27)
FAST_UNPEND(28,fastunpend28)
FAST_UNPEND(29,fastunpend29)
FAST_UNPEND(30,fastunpend30)
FAST_UNPEND(31,fastunpend31)
MCOUNT_LABEL(eintr)
/*
* Executed by a CPU when it receives a RENDEZVOUS IPI from another CPU.
*
* - Calls the generic rendezvous action function.
*/
.text
SUPERALIGN_TEXT
.globl Xrendezvous
Xrendezvous:
PUSH_FRAME
movl $KDSEL, %eax
mov %ax, %ds /* use KERNEL data segment */
mov %ax, %es
movl $KPSEL, %eax
mov %ax, %fs
call smp_rendezvous_action
movl $0, lapic+LA_EOI /* End Of Interrupt to APIC */
POP_FRAME
iret
.data
.globl apic_pin_trigger
apic_pin_trigger:
.long 0
.text