freebsd-dev/sys/i386/isa/npx.c
Peter Wemm 6182fdbda8 Bring the 'new-bus' to the i386. This extensively changes the way the
i386 platform boots, it is no longer ISA-centric, and is fully dynamic.
Most old drivers compile and run without modification via 'compatability
shims' to enable a smoother transition.  eisa, isapnp and pccard* are
not yet using the new resource manager.  Once fully converted, all drivers
will be loadable, including PCI and ISA.

(Some other changes appear to have snuck in, including a port of Soren's
 ATA driver to the Alpha.  Soren, back this out if you need to.)

This is a checkpoint of work-in-progress, but is quite functional.

The bulk of the work was done over the last few years by Doug Rabson and
Garrett Wollman.

Approved by:	core
1999-04-16 21:22:55 +00:00

731 lines
20 KiB
C

/*-
* Copyright (c) 1990 William Jolitz.
* Copyright (c) 1991 The Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: @(#)npx.c 7.2 (Berkeley) 5/12/91
* $Id: npx.c,v 1.66 1999/03/28 23:28:18 dt Exp $
*/
#include "npx.h"
#if NNPX > 0
#include "opt_debug_npx.h"
#include "opt_math_emulate.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/module.h>
#include <sys/sysctl.h>
#include <sys/proc.h>
#include <machine/bus.h>
#include <sys/rman.h>
#ifdef NPX_DEBUG
#include <sys/syslog.h>
#endif
#include <sys/signalvar.h>
#ifndef SMP
#include <machine/asmacros.h>
#endif
#include <machine/cputypes.h>
#include <machine/frame.h>
#include <machine/ipl.h>
#include <machine/md_var.h>
#include <machine/pcb.h>
#include <machine/psl.h>
#ifndef SMP
#include <machine/clock.h>
#endif
#include <machine/resource.h>
#include <machine/specialreg.h>
#include <machine/segments.h>
#ifndef SMP
#include <i386/isa/icu.h>
#include <i386/isa/intr_machdep.h>
#include <i386/isa/isa.h>
#endif
/*
* 387 and 287 Numeric Coprocessor Extension (NPX) Driver.
*/
/* Configuration flags. */
#define NPX_DISABLE_I586_OPTIMIZED_BCOPY (1 << 0)
#define NPX_DISABLE_I586_OPTIMIZED_BZERO (1 << 1)
#define NPX_DISABLE_I586_OPTIMIZED_COPYIO (1 << 2)
#ifdef __GNUC__
#define fldcw(addr) __asm("fldcw %0" : : "m" (*(addr)))
#define fnclex() __asm("fnclex")
#define fninit() __asm("fninit")
#define fnop() __asm("fnop")
#define fnsave(addr) __asm __volatile("fnsave %0" : "=m" (*(addr)))
#define fnstcw(addr) __asm __volatile("fnstcw %0" : "=m" (*(addr)))
#define fnstsw(addr) __asm __volatile("fnstsw %0" : "=m" (*(addr)))
#define fp_divide_by_0() __asm("fldz; fld1; fdiv %st,%st(1); fnop")
#define frstor(addr) __asm("frstor %0" : : "m" (*(addr)))
#define start_emulating() __asm("smsw %%ax; orb %0,%%al; lmsw %%ax" \
: : "n" (CR0_TS) : "ax")
#define stop_emulating() __asm("clts")
#else /* not __GNUC__ */
void fldcw __P((caddr_t addr));
void fnclex __P((void));
void fninit __P((void));
void fnop __P((void));
void fnsave __P((caddr_t addr));
void fnstcw __P((caddr_t addr));
void fnstsw __P((caddr_t addr));
void fp_divide_by_0 __P((void));
void frstor __P((caddr_t addr));
void start_emulating __P((void));
void stop_emulating __P((void));
#endif /* __GNUC__ */
typedef u_char bool_t;
static int npx_attach __P((device_t dev));
void npx_intr __P((void *));
static int npx_probe __P((device_t dev));
static int npx_probe1 __P((device_t dev));
#ifdef I586_CPU
static long timezero __P((const char *funcname,
void (*func)(void *buf, size_t len)));
#endif /* I586_CPU */
int hw_float; /* XXX currently just alias for npx_exists */
SYSCTL_INT(_hw,HW_FLOATINGPT, floatingpoint,
CTLFLAG_RD, &hw_float, 0,
"Floatingpoint instructions executed in hardware");
#ifndef SMP
static u_int npx0_imask = SWI_CLOCK_MASK;
static struct gate_descriptor npx_idt_probeintr;
static int npx_intrno;
static volatile u_int npx_intrs_while_probing;
static volatile u_int npx_traps_while_probing;
#endif
static bool_t npx_ex16;
static bool_t npx_exists;
static bool_t npx_irq13;
#ifndef SMP
/*
* Special interrupt handlers. Someday intr0-intr15 will be used to count
* interrupts. We'll still need a special exception 16 handler. The busy
* latch stuff in probeintr() can be moved to npxprobe().
*/
inthand_t probeintr;
__asm(" \n\
.text \n\
.p2align 2,0x90 \n\
" __XSTRING(CNAME(probeintr)) ": \n\
ss \n\
incl " __XSTRING(CNAME(npx_intrs_while_probing)) " \n\
pushl %eax \n\
movb $0x20,%al # EOI (asm in strings loses cpp features) \n\
outb %al,$0xa0 # IO_ICU2 \n\
outb %al,$0x20 # IO_ICU1 \n\
movb $0,%al \n\
outb %al,$0xf0 # clear BUSY# latch \n\
popl %eax \n\
iret \n\
");
inthand_t probetrap;
__asm(" \n\
.text \n\
.p2align 2,0x90 \n\
" __XSTRING(CNAME(probetrap)) ": \n\
ss \n\
incl " __XSTRING(CNAME(npx_traps_while_probing)) " \n\
fnclex \n\
iret \n\
");
#endif /* SMP */
/*
* Probe routine. Initialize cr0 to give correct behaviour for [f]wait
* whether the device exists or not (XXX should be elsewhere). Set flags
* to tell npxattach() what to do. Modify device struct if npx doesn't
* need to use interrupts. Return 1 if device exists.
*/
static int
npx_probe(dev)
device_t dev;
{
/*#ifdef SMP*/
#if 1
return npx_probe1(dev);
#else /* SMP */
int result;
u_long save_eflags;
u_char save_icu1_mask;
u_char save_icu2_mask;
struct gate_descriptor save_idt_npxintr;
struct gate_descriptor save_idt_npxtrap;
/*
* This routine is now just a wrapper for npxprobe1(), to install
* special npx interrupt and trap handlers, to enable npx interrupts
* and to disable other interrupts. Someday isa_configure() will
* install suitable handlers and run with interrupts enabled so we
* won't need to do so much here.
*/
npx_intrno = NRSVIDT + 13;
save_eflags = read_eflags();
disable_intr();
save_icu1_mask = inb(IO_ICU1 + 1);
save_icu2_mask = inb(IO_ICU2 + 1);
save_idt_npxintr = idt[npx_intrno];
save_idt_npxtrap = idt[16];
outb(IO_ICU1 + 1, ~IRQ_SLAVE);
outb(IO_ICU2 + 1, ~(1 << (13 - 8)));
setidt(16, probetrap, SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
setidt(npx_intrno, probeintr, SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
npx_idt_probeintr = idt[npx_intrno];
enable_intr();
result = npx_probe1(dev);
disable_intr();
outb(IO_ICU1 + 1, save_icu1_mask);
outb(IO_ICU2 + 1, save_icu2_mask);
idt[npx_intrno] = save_idt_npxintr;
idt[16] = save_idt_npxtrap;
write_eflags(save_eflags);
return (result);
#endif /* SMP */
}
static int
npx_probe1(dev)
device_t dev;
{
#ifndef SMP
u_short control;
u_short status;
#endif
/*
* Partially reset the coprocessor, if any. Some BIOS's don't reset
* it after a warm boot.
*/
outb(0xf1, 0); /* full reset on some systems, NOP on others */
outb(0xf0, 0); /* clear BUSY# latch */
/*
* Prepare to trap all ESC (i.e., NPX) instructions and all WAIT
* instructions. We must set the CR0_MP bit and use the CR0_TS
* bit to control the trap, because setting the CR0_EM bit does
* not cause WAIT instructions to trap. It's important to trap
* WAIT instructions - otherwise the "wait" variants of no-wait
* control instructions would degenerate to the "no-wait" variants
* after FP context switches but work correctly otherwise. It's
* particularly important to trap WAITs when there is no NPX -
* otherwise the "wait" variants would always degenerate.
*
* Try setting CR0_NE to get correct error reporting on 486DX's.
* Setting it should fail or do nothing on lesser processors.
*/
load_cr0(rcr0() | CR0_MP | CR0_NE);
/*
* But don't trap while we're probing.
*/
stop_emulating();
/*
* Finish resetting the coprocessor, if any. If there is an error
* pending, then we may get a bogus IRQ13, but probeintr() will handle
* it OK. Bogus halts have never been observed, but we enabled
* IRQ13 and cleared the BUSY# latch early to handle them anyway.
*/
fninit();
/*#ifdef SMP*/
#if 1
/*
* Exception 16 MUST work for SMP.
*/
npx_irq13 = 0;
npx_ex16 = hw_float = npx_exists = 1;
device_set_desc(dev, "math processor");
return (0);
#else /* !SMP */
device_set_desc(dev, "math processor");
/*
* Don't use fwait here because it might hang.
* Don't use fnop here because it usually hangs if there is no FPU.
*/
DELAY(1000); /* wait for any IRQ13 */
#ifdef DIAGNOSTIC
if (npx_intrs_while_probing != 0)
printf("fninit caused %u bogus npx interrupt(s)\n",
npx_intrs_while_probing);
if (npx_traps_while_probing != 0)
printf("fninit caused %u bogus npx trap(s)\n",
npx_traps_while_probing);
#endif
/*
* Check for a status of mostly zero.
*/
status = 0x5a5a;
fnstsw(&status);
if ((status & 0xb8ff) == 0) {
/*
* Good, now check for a proper control word.
*/
control = 0x5a5a;
fnstcw(&control);
if ((control & 0x1f3f) == 0x033f) {
hw_float = npx_exists = 1;
/*
* We have an npx, now divide by 0 to see if exception
* 16 works.
*/
control &= ~(1 << 2); /* enable divide by 0 trap */
fldcw(&control);
npx_traps_while_probing = npx_intrs_while_probing = 0;
fp_divide_by_0();
if (npx_traps_while_probing != 0) {
/*
* Good, exception 16 works.
*/
npx_ex16 = 1;
return (0);
}
if (npx_intrs_while_probing != 0) {
int rid;
struct resource *r;
void *intr;
/*
* Bad, we are stuck with IRQ13.
*/
npx_irq13 = 1;
/*
* npxattach would be too late to set npx0_imask.
*/
npx0_imask |= (1 << 13);
/*
* We allocate these resources permanently,
* so there is no need to keep track of them.
*/
rid = 0;
r = bus_alloc_resource(dev, SYS_RES_IOPORT,
&rid, IO_NPX, IO_NPX,
IO_NPXSIZE, RF_ACTIVE);
if (r == 0)
panic("npx: can't get ports");
rid = 0;
r = bus_alloc_resource(dev, SYS_RES_IRQ,
&rid, 13, 13,
1, RF_ACTIVE);
if (r == 0)
panic("npx: can't get IRQ");
BUS_SETUP_INTR(device_get_parent(dev),
dev, r, npx_intr, 0, &intr);
if (intr == 0)
panic("npx: can't create intr");
return (0);
}
/*
* Worse, even IRQ13 is broken. Use emulator.
*/
}
}
/*
* Probe failed, but we want to get to npxattach to initialize the
* emulator and say that it has been installed. XXX handle devices
* that aren't really devices better.
*/
return (0);
#endif /* SMP */
}
/*
* Attach routine - announce which it is, and wire into system
*/
int
npx_attach(dev)
device_t dev;
{
int flags;
device_print_prettyname(dev);
if (npx_irq13) {
printf("using IRQ 13 interface\n");
} else {
if (npx_ex16)
printf("INT 16 interface\n");
#if defined(MATH_EMULATE) || defined(GPL_MATH_EMULATE)
else if (npx_exists) {
printf("error reporting broken; using 387 emulator\n");
hw_float = npx_exists = 0;
} else
printf("387 emulator\n");
#else
else
printf("no 387 emulator in kernel!\n");
#endif
}
npxinit(__INITIAL_NPXCW__);
#ifdef I586_CPU
if (resource_int_value("npx", 0, "flags", &flags) != 0)
flags = 0;
if (cpu_class == CPUCLASS_586 && npx_ex16 &&
timezero("i586_bzero()", i586_bzero) <
timezero("bzero()", bzero) * 4 / 5) {
if (!(flags & NPX_DISABLE_I586_OPTIMIZED_BCOPY)) {
bcopy_vector = i586_bcopy;
ovbcopy_vector = i586_bcopy;
}
if (!(flags & NPX_DISABLE_I586_OPTIMIZED_BZERO))
bzero = i586_bzero;
if (!(flags & NPX_DISABLE_I586_OPTIMIZED_COPYIO)) {
copyin_vector = i586_copyin;
copyout_vector = i586_copyout;
}
}
#endif
return (0); /* XXX unused */
}
/*
* Initialize floating point unit.
*/
void
npxinit(control)
u_short control;
{
struct save87 dummy;
if (!npx_exists)
return;
/*
* fninit has the same h/w bugs as fnsave. Use the detoxified
* fnsave to throw away any junk in the fpu. npxsave() initializes
* the fpu and sets npxproc = NULL as important side effects.
*/
npxsave(&dummy);
stop_emulating();
fldcw(&control);
if (curpcb != NULL)
fnsave(&curpcb->pcb_savefpu);
start_emulating();
}
/*
* Free coprocessor (if we have it).
*/
void
npxexit(p)
struct proc *p;
{
if (p == npxproc)
npxsave(&curpcb->pcb_savefpu);
#ifdef NPX_DEBUG
if (npx_exists) {
u_int masked_exceptions;
masked_exceptions = curpcb->pcb_savefpu.sv_env.en_cw
& curpcb->pcb_savefpu.sv_env.en_sw & 0x7f;
/*
* Log exceptions that would have trapped with the old
* control word (overflow, divide by 0, and invalid operand).
*/
if (masked_exceptions & 0x0d)
log(LOG_ERR,
"pid %d (%s) exited with masked floating point exceptions 0x%02x\n",
p->p_pid, p->p_comm, masked_exceptions);
}
#endif
}
/*
* Preserve the FP status word, clear FP exceptions, then generate a SIGFPE.
*
* Clearing exceptions is necessary mainly to avoid IRQ13 bugs. We now
* depend on longjmp() restoring a usable state. Restoring the state
* or examining it might fail if we didn't clear exceptions.
*
* XXX there is no standard way to tell SIGFPE handlers about the error
* state. The old interface:
*
* void handler(int sig, int code, struct sigcontext *scp);
*
* is broken because it is non-ANSI and because the FP state is not in
* struct sigcontext.
*
* XXX the FP state is not preserved across signal handlers. So signal
* handlers cannot afford to do FP unless they preserve the state or
* longjmp() out. Both preserving the state and longjmp()ing may be
* destroyed by IRQ13 bugs. Clearing FP exceptions is not an acceptable
* solution for signals other than SIGFPE.
*/
void
npx_intr(dummy)
void *dummy;
{
int code;
struct intrframe *frame;
if (npxproc == NULL || !npx_exists) {
printf("npxintr: npxproc = %p, curproc = %p, npx_exists = %d\n",
npxproc, curproc, npx_exists);
panic("npxintr from nowhere");
}
if (npxproc != curproc) {
printf("npxintr: npxproc = %p, curproc = %p, npx_exists = %d\n",
npxproc, curproc, npx_exists);
panic("npxintr from non-current process");
}
outb(0xf0, 0);
fnstsw(&curpcb->pcb_savefpu.sv_ex_sw);
fnclex();
/*
* Pass exception to process.
*/
frame = (struct intrframe *)&dummy; /* XXX */
if ((ISPL(frame->if_cs) == SEL_UPL) || (frame->if_eflags & PSL_VM)) {
/*
* Interrupt is essentially a trap, so we can afford to call
* the SIGFPE handler (if any) as soon as the interrupt
* returns.
*
* XXX little or nothing is gained from this, and plenty is
* lost - the interrupt frame has to contain the trap frame
* (this is otherwise only necessary for the rescheduling trap
* in doreti, and the frame for that could easily be set up
* just before it is used).
*/
curproc->p_md.md_regs = (struct trapframe *)&frame->if_es;
#ifdef notyet
/*
* Encode the appropriate code for detailed information on
* this exception.
*/
code = XXX_ENCODE(curpcb->pcb_savefpu.sv_ex_sw);
#else
code = 0; /* XXX */
#endif
trapsignal(curproc, SIGFPE, code);
} else {
/*
* Nested interrupt. These losers occur when:
* o an IRQ13 is bogusly generated at a bogus time, e.g.:
* o immediately after an fnsave or frstor of an
* error state.
* o a couple of 386 instructions after
* "fstpl _memvar" causes a stack overflow.
* These are especially nasty when combined with a
* trace trap.
* o an IRQ13 occurs at the same time as another higher-
* priority interrupt.
*
* Treat them like a true async interrupt.
*/
psignal(curproc, SIGFPE);
}
}
/*
* Implement device not available (DNA) exception
*
* It would be better to switch FP context here (if curproc != npxproc)
* and not necessarily for every context switch, but it is too hard to
* access foreign pcb's.
*/
int
npxdna()
{
if (!npx_exists)
return (0);
if (npxproc != NULL) {
printf("npxdna: npxproc = %p, curproc = %p\n",
npxproc, curproc);
panic("npxdna");
}
stop_emulating();
/*
* Record new context early in case frstor causes an IRQ13.
*/
npxproc = curproc;
curpcb->pcb_savefpu.sv_ex_sw = 0;
/*
* The following frstor may cause an IRQ13 when the state being
* restored has a pending error. The error will appear to have been
* triggered by the current (npx) user instruction even when that
* instruction is a no-wait instruction that should not trigger an
* error (e.g., fnclex). On at least one 486 system all of the
* no-wait instructions are broken the same as frstor, so our
* treatment does not amplify the breakage. On at least one
* 386/Cyrix 387 system, fnclex works correctly while frstor and
* fnsave are broken, so our treatment breaks fnclex if it is the
* first FPU instruction after a context switch.
*/
frstor(&curpcb->pcb_savefpu);
return (1);
}
/*
* Wrapper for fnsave instruction to handle h/w bugs. If there is an error
* pending, then fnsave generates a bogus IRQ13 on some systems. Force
* any IRQ13 to be handled immediately, and then ignore it. This routine is
* often called at splhigh so it must not use many system services. In
* particular, it's much easier to install a special handler than to
* guarantee that it's safe to use npxintr() and its supporting code.
*/
void
npxsave(addr)
struct save87 *addr;
{
#ifdef SMP
stop_emulating();
fnsave(addr);
/* fnop(); */
start_emulating();
npxproc = NULL;
#else /* SMP */
u_char icu1_mask;
u_char icu2_mask;
u_char old_icu1_mask;
u_char old_icu2_mask;
struct gate_descriptor save_idt_npxintr;
disable_intr();
old_icu1_mask = inb(IO_ICU1 + 1);
old_icu2_mask = inb(IO_ICU2 + 1);
save_idt_npxintr = idt[npx_intrno];
outb(IO_ICU1 + 1, old_icu1_mask & ~(IRQ_SLAVE | npx0_imask));
outb(IO_ICU2 + 1, old_icu2_mask & ~(npx0_imask >> 8));
idt[npx_intrno] = npx_idt_probeintr;
enable_intr();
stop_emulating();
fnsave(addr);
fnop();
start_emulating();
npxproc = NULL;
disable_intr();
icu1_mask = inb(IO_ICU1 + 1); /* masks may have changed */
icu2_mask = inb(IO_ICU2 + 1);
outb(IO_ICU1 + 1,
(icu1_mask & ~npx0_imask) | (old_icu1_mask & npx0_imask));
outb(IO_ICU2 + 1,
(icu2_mask & ~(npx0_imask >> 8))
| (old_icu2_mask & (npx0_imask >> 8)));
idt[npx_intrno] = save_idt_npxintr;
enable_intr(); /* back to usual state */
#endif /* SMP */
}
#ifdef I586_CPU
static long
timezero(funcname, func)
const char *funcname;
void (*func) __P((void *buf, size_t len));
{
void *buf;
#define BUFSIZE 1000000
long usec;
struct timeval finish, start;
buf = malloc(BUFSIZE, M_TEMP, M_NOWAIT);
if (buf == NULL)
return (BUFSIZE);
microtime(&start);
(*func)(buf, BUFSIZE);
microtime(&finish);
usec = 1000000 * (finish.tv_sec - start.tv_sec) +
finish.tv_usec - start.tv_usec;
if (usec <= 0)
usec = 1;
if (bootverbose)
printf("%s bandwidth = %ld bytes/sec\n",
funcname, (long)(BUFSIZE * (int64_t)1000000 / usec));
free(buf, M_TEMP);
return (usec);
}
#endif /* I586_CPU */
static device_method_t npx_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, npx_probe),
DEVMETHOD(device_attach, npx_attach),
DEVMETHOD(device_detach, bus_generic_detach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, bus_generic_resume),
{ 0, 0 }
};
static driver_t npx_driver = {
"npx",
npx_methods,
DRIVER_TYPE_MISC,
1, /* no softc */
};
static devclass_t npx_devclass;
/*
* We prefer to attach to the root nexus so that the usual case (exception 16)
* doesn't describe the processor as being `on isa'.
*/
DRIVER_MODULE(npx, nexus, npx_driver, npx_devclass, 0, 0);
#endif /* NNPX > 0 */