freebsd-dev/sys/arm/conf/ZEDBOARD
Ian Lepore eb6e1a0277 Ensure that all arm kernel configs contain ALT_BREAK_TO_DEBUGGER and not
BREAK_TO_DEBUGGER if they have a serial console (most do).  A burst of
serial line noise (such as unplugging a usb serial adapter) can look like
a break and drop a working system into the debugger.  The alt break sequence
(<CR>~^B) works fine on both serial and non-serial consoles.
2015-05-25 23:27:13 +00:00

89 lines
2.5 KiB
Plaintext

#
# ZEDBOARD -- Custom configuration for the Xilinx Zynq-7000 based
# ZedBoard (www.zedboard.org)
#
# For more information on this file, please read the config(5) manual page,
# and/or the handbook section on Kernel Configuration Files:
#
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD$
ident ZEDBOARD
include "std.armv6"
include "../xilinx/zedboard/std.zedboard"
options SCHED_ULE # ULE scheduler
#options NFSSD # Network Filesystem Server
options SMP # Enable multiple cores
# Debugging for use in -current
makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
options ALT_BREAK_TO_DEBUGGER
options KDB # Enable kernel debugger support
# For minimum debugger support (stable branch) use:
#options KDB_TRACE # Print a stack trace for a panic
# For full debugger support use this instead:
options DDB # Enable the kernel debugger
#options INVARIANTS # Enable calls of extra sanity checking
#options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS
#options WITNESS # Enable checks to detect deadlocks and cycles
#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed
#options DIAGNOSTIC
# NFS root from boopt/dhcp
#options BOOTP
#options BOOTP_NFSROOT
#options BOOTP_COMPAT
#options BOOTP_NFSV3
options ROOTDEVNAME=\"ufs:mmcsd0s2a\"
# Interrupt controller
device gic
device loop
device random
device ether
device cgem # Zynq-7000 gig ethernet device
device mii
device e1000phy
device pty
device uart
device gpio
device md
device mmc # mmc/sd bus
device mmcsd # mmc/sd flash cards
device sdhci # generic sdhci
device bpf # Berkeley packet filter
# USB support
device usb
options USB_DEBUG
#options USB_REQ_DEBUG
#options USB_VERBOSE
device ehci
device umass
device scbus # SCSI bus (required for ATA/SCSI)
device da # Direct Access (disks)
device axe # USB-Ethernet
# Flattened Device Tree
options FDT # Configure using FDT/DTB data
#options FDT_DTB_STATIC
#makeoptions FDT_DTS_FILE=zedboard.dts