freebsd-dev/sys/mips/atheros/ar724x_chip.c
Adrian Chadd 23ec80a3da Further ar71xx MII support improvements.
* Flesh out the PLL configuration fetch function, which will return the PLL
  configuration based on the unit number and speed.
* Remove the PLL speed config logic from the AR71xx/AR91xx chip PLL config
  function - pass in a 'pll' value instead.
* Modify arge_set_pll() to:
  + fetch the PLL configuration
  + write the PLL configuration
  + update the MII speed configuration.

This will allow if_arge to override the PLL configuration as required.

Obtained from:	Linux/Atheros/OpenWRT
2012-05-02 04:51:43 +00:00

246 lines
5.5 KiB
C

/*-
* Copyright (c) 2010 Adrian Chadd
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_ddb.h"
#include <sys/param.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/cons.h>
#include <sys/kdb.h>
#include <sys/reboot.h>
#include <vm/vm.h>
#include <vm/vm_page.h>
#include <net/ethernet.h>
#include <machine/clock.h>
#include <machine/cpu.h>
#include <machine/cpuregs.h>
#include <machine/hwfunc.h>
#include <machine/md_var.h>
#include <machine/trap.h>
#include <machine/vmparam.h>
#include <mips/atheros/ar71xxreg.h>
#include <mips/atheros/ar724xreg.h>
#include <mips/atheros/ar71xx_cpudef.h>
#include <mips/atheros/ar71xx_setup.h>
#include <mips/atheros/ar71xx_chip.h>
#include <mips/atheros/ar724x_chip.h>
#include <mips/sentry5/s5reg.h>
static void
ar724x_chip_detect_mem_size(void)
{
}
static void
ar724x_chip_detect_sys_frequency(void)
{
uint32_t pll;
uint32_t freq;
uint32_t div;
pll = ATH_READ_REG(AR724X_PLL_REG_CPU_CONFIG);
div = ((pll >> AR724X_PLL_DIV_SHIFT) & AR724X_PLL_DIV_MASK);
freq = div * AR724X_BASE_FREQ;
div = ((pll >> AR724X_PLL_REF_DIV_SHIFT) & AR724X_PLL_REF_DIV_MASK);
freq *= div;
u_ar71xx_cpu_freq = freq;
div = ((pll >> AR724X_DDR_DIV_SHIFT) & AR724X_DDR_DIV_MASK) + 1;
u_ar71xx_ddr_freq = freq / div;
div = (((pll >> AR724X_AHB_DIV_SHIFT) & AR724X_AHB_DIV_MASK) + 1) * 2;
u_ar71xx_ahb_freq = u_ar71xx_cpu_freq / div;
}
static void
ar724x_chip_device_stop(uint32_t mask)
{
uint32_t mask_inv, reg;
mask_inv = mask & AR724X_RESET_MODULE_USB_OHCI_DLL;
reg = ATH_READ_REG(AR724X_RESET_REG_RESET_MODULE);
reg |= mask;
reg &= ~mask_inv;
ATH_WRITE_REG(AR724X_RESET_REG_RESET_MODULE, reg);
}
static void
ar724x_chip_device_start(uint32_t mask)
{
uint32_t mask_inv, reg;
mask_inv = mask & AR724X_RESET_MODULE_USB_OHCI_DLL;
reg = ATH_READ_REG(AR724X_RESET_REG_RESET_MODULE);
reg &= ~mask;
reg |= mask_inv;
ATH_WRITE_REG(AR724X_RESET_REG_RESET_MODULE, reg);
}
static int
ar724x_chip_device_stopped(uint32_t mask)
{
uint32_t reg;
reg = ATH_READ_REG(AR724X_RESET_REG_RESET_MODULE);
return ((reg & mask) == mask);
}
static void
ar724x_chip_set_mii_speed(uint32_t unit, uint32_t speed)
{
/* XXX TODO */
return;
}
/*
* XXX TODO: set the PLL for arge0 only on AR7242.
* The PLL/clock requirements are different.
*
* Otherwise, it's a NULL function for AR7240, AR7241 and
* AR7242 arge1.
*/
static void
ar724x_chip_set_pll_ge(int unit, int speed, uint32_t pll)
{
switch (unit) {
case 0:
/* XXX TODO */
break;
case 1:
/* XXX TODO */
break;
default:
printf("%s: invalid PLL set for arge unit: %d\n",
__func__, unit);
return;
}
}
static void
ar724x_chip_ddr_flush_ge(int unit)
{
switch (unit) {
case 0:
ar71xx_ddr_flush(AR724X_DDR_REG_FLUSH_GE0);
break;
case 1:
ar71xx_ddr_flush(AR724X_DDR_REG_FLUSH_GE1);
break;
default:
printf("%s: invalid DDR flush for arge unit: %d\n",
__func__, unit);
return;
}
}
static void
ar724x_chip_ddr_flush_ip2(void)
{
ar71xx_ddr_flush(AR724X_DDR_REG_FLUSH_PCIE);
}
static uint32_t
ar724x_chip_get_eth_pll(unsigned int mac, int speed)
{
return (0);
}
static void
ar724x_chip_init_usb_peripheral(void)
{
switch (ar71xx_soc) {
case AR71XX_SOC_AR7240:
ar71xx_device_stop(AR724X_RESET_MODULE_USB_OHCI_DLL |
AR724X_RESET_USB_HOST);
DELAY(1000);
ar71xx_device_start(AR724X_RESET_MODULE_USB_OHCI_DLL |
AR724X_RESET_USB_HOST);
DELAY(1000);
/*
* WAR for HW bug. Here it adjusts the duration
* between two SOFS.
*/
ATH_WRITE_REG(AR71XX_USB_CTRL_FLADJ,
(3 << USB_CTRL_FLADJ_A0_SHIFT));
break;
case AR71XX_SOC_AR7241:
case AR71XX_SOC_AR7242:
ar71xx_device_start(AR724X_RESET_MODULE_USB_OHCI_DLL);
DELAY(100);
ar71xx_device_start(AR724X_RESET_USB_HOST);
DELAY(100);
ar71xx_device_start(AR724X_RESET_USB_PHY);
DELAY(100);
break;
default:
break;
}
}
struct ar71xx_cpu_def ar724x_chip_def = {
&ar724x_chip_detect_mem_size,
&ar724x_chip_detect_sys_frequency,
&ar724x_chip_device_stop,
&ar724x_chip_device_start,
&ar724x_chip_device_stopped,
&ar724x_chip_set_pll_ge,
&ar724x_chip_set_mii_speed,
&ar71xx_chip_set_mii_if,
&ar724x_chip_ddr_flush_ge,
&ar724x_chip_get_eth_pll,
&ar724x_chip_ddr_flush_ip2,
&ar724x_chip_init_usb_peripheral
};