freebsd-dev/sys/mips/atheros/ar91xx_chip.c
Pedro F. Giffuni 19d3b47b92 sys/mips: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 15:07:26 +00:00

220 lines
5.3 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2010 Adrian Chadd
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_ddb.h"
#include <sys/param.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/cons.h>
#include <sys/kdb.h>
#include <sys/reboot.h>
#include <vm/vm.h>
#include <vm/vm_page.h>
#include <net/ethernet.h>
#include <machine/clock.h>
#include <machine/cpu.h>
#include <machine/cpuregs.h>
#include <machine/hwfunc.h>
#include <machine/md_var.h>
#include <machine/trap.h>
#include <machine/vmparam.h>
#include <mips/atheros/ar71xxreg.h>
#include <mips/atheros/ar71xx_cpudef.h>
#include <mips/atheros/ar71xx_chip.h>
#include <mips/atheros/ar91xxreg.h>
#include <mips/atheros/ar91xx_chip.h>
static void
ar91xx_chip_detect_mem_size(void)
{
}
static void
ar91xx_chip_detect_sys_frequency(void)
{
uint32_t pll;
uint32_t freq;
uint32_t div;
u_ar71xx_mdio_freq = u_ar71xx_refclk = AR91XX_BASE_FREQ;
pll = ATH_READ_REG(AR91XX_PLL_REG_CPU_CONFIG);
div = ((pll >> AR91XX_PLL_DIV_SHIFT) & AR91XX_PLL_DIV_MASK);
freq = div * AR91XX_BASE_FREQ;
u_ar71xx_cpu_freq = freq;
div = ((pll >> AR91XX_DDR_DIV_SHIFT) & AR91XX_DDR_DIV_MASK) + 1;
u_ar71xx_ddr_freq = freq / div;
div = (((pll >> AR91XX_AHB_DIV_SHIFT) & AR91XX_AHB_DIV_MASK) + 1) * 2;
u_ar71xx_ahb_freq = u_ar71xx_cpu_freq / div;
u_ar71xx_uart_freq = u_ar71xx_cpu_freq / div;
u_ar71xx_wdt_freq = u_ar71xx_cpu_freq / div;
}
static void
ar91xx_chip_device_stop(uint32_t mask)
{
uint32_t reg;
reg = ATH_READ_REG(AR91XX_RESET_REG_RESET_MODULE);
ATH_WRITE_REG(AR91XX_RESET_REG_RESET_MODULE, reg | mask);
}
static void
ar91xx_chip_device_start(uint32_t mask)
{
uint32_t reg;
reg = ATH_READ_REG(AR91XX_RESET_REG_RESET_MODULE);
ATH_WRITE_REG(AR91XX_RESET_REG_RESET_MODULE, reg & ~mask);
}
static int
ar91xx_chip_device_stopped(uint32_t mask)
{
uint32_t reg;
reg = ATH_READ_REG(AR91XX_RESET_REG_RESET_MODULE);
return ((reg & mask) == mask);
}
static void
ar91xx_chip_set_pll_ge(int unit, int speed, uint32_t pll)
{
switch (unit) {
case 0:
ar71xx_write_pll(AR91XX_PLL_REG_ETH_CONFIG,
AR91XX_PLL_REG_ETH0_INT_CLOCK, pll,
AR91XX_ETH0_PLL_SHIFT);
break;
case 1:
ar71xx_write_pll(AR91XX_PLL_REG_ETH_CONFIG,
AR91XX_PLL_REG_ETH1_INT_CLOCK, pll,
AR91XX_ETH1_PLL_SHIFT);
break;
default:
printf("%s: invalid PLL set for arge unit: %d\n",
__func__, unit);
return;
}
}
static void
ar91xx_chip_ddr_flush(ar71xx_flush_ddr_id_t id)
{
switch (id) {
case AR71XX_CPU_DDR_FLUSH_GE0:
ar71xx_ddr_flush(AR91XX_DDR_REG_FLUSH_GE0);
break;
case AR71XX_CPU_DDR_FLUSH_GE1:
ar71xx_ddr_flush(AR91XX_DDR_REG_FLUSH_GE1);
break;
case AR71XX_CPU_DDR_FLUSH_USB:
ar71xx_ddr_flush(AR91XX_DDR_REG_FLUSH_USB);
break;
case AR71XX_CPU_DDR_FLUSH_WMAC:
ar71xx_ddr_flush(AR91XX_DDR_REG_FLUSH_WMAC);
break;
default:
printf("%s: invalid DDR flush id (%d)\n", __func__, id);
break;
}
}
static uint32_t
ar91xx_chip_get_eth_pll(unsigned int mac, int speed)
{
uint32_t pll;
switch(speed) {
case 10:
pll = AR91XX_PLL_VAL_10;
break;
case 100:
pll = AR91XX_PLL_VAL_100;
break;
case 1000:
pll = AR91XX_PLL_VAL_1000;
break;
default:
printf("%s%d: invalid speed %d\n", __func__, mac, speed);
pll = 0;
}
return (pll);
}
static void
ar91xx_chip_init_usb_peripheral(void)
{
ar71xx_device_stop(AR91XX_RST_RESET_MODULE_USBSUS_OVERRIDE);
DELAY(100);
ar71xx_device_start(RST_RESET_USB_HOST);
DELAY(100);
ar71xx_device_start(RST_RESET_USB_PHY);
DELAY(100);
/* Wireless */
ar71xx_device_stop(AR91XX_RST_RESET_MODULE_AMBA2WMAC);
DELAY(1000);
ar71xx_device_start(AR91XX_RST_RESET_MODULE_AMBA2WMAC);
DELAY(1000);
}
struct ar71xx_cpu_def ar91xx_chip_def = {
&ar91xx_chip_detect_mem_size,
&ar91xx_chip_detect_sys_frequency,
&ar91xx_chip_device_stop,
&ar91xx_chip_device_start,
&ar91xx_chip_device_stopped,
&ar91xx_chip_set_pll_ge,
&ar71xx_chip_set_mii_speed,
&ar71xx_chip_set_mii_if,
&ar91xx_chip_get_eth_pll,
&ar91xx_chip_ddr_flush,
&ar91xx_chip_init_usb_peripheral,
};