freebsd-dev/sys/dev/mlx/mlxreg.h
Mike Smith f6b84b08c9 Add support for the version 4 firmware interface and the DAC960 PG and
PJ cards.  This will probably also support the AcceleRAID and
eXtremeRAID cards, but nobody has volunteered one for testing, so I
haven't enabled their PCI device IDs.

Slightly clean up communication between the disk devices and the
controller device as per new practice, and move some more register-
related items int mlxreg.h from mlxvar.h.

Remove some unnecessary read-modify-write operations to the card
control registers; they don't behave like that.

Increase the status polling interval to 10 seconds.  It's still possible
to load the card up to the point where a status poll will find the
previous poll still running, but this will reduce the incidence of
complaints.
1999-10-14 02:54:06 +00:00

248 lines
8.4 KiB
C

/*-
* Copyright (c) 1999 Michael Smith
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Selected command codes.
*/
#define MLX_CMD_ENQUIRY 0x53
#define MLX_CMD_ENQUIRY2 0x1c
#define MLX_CMD_ENQSYSDRIVE 0x19
#define MLX_CMD_READOLDSG 0xb6
#define MLX_CMD_WRITEOLDSG 0xb7
#define MLX_CMD_FLUSH 0x0a
#define MLX_CMD_LOGOP 0x72
#define MLX_CMD_REBUILDASYNC 0x16
#define MLX_CMD_CHECKASYNC 0x1e
#define MLX_CMD_REBUILDSTAT 0x0c
#define MLX_CMD_STOPCHANNEL 0x13
#define MLX_CMD_STARTCHANNEL 0x12
/*
* Status values.
*/
#define MLX_STATUS_OK 0x0000
#define MLX_STATUS_RDWROFFLINE 0x0002 /* read/write claims drive is offline */
#define MLX_STATUS_WEDGED 0xdead /* controller not listening */
#define MLX_STATUS_BUSY 0xffff /* command is in controller */
/*
* Accessor defines for the V3 interface.
*/
#define MLX_V3_MAILBOX 0x00
#define MLX_V3_STATUS_IDENT 0x0d
#define MLX_V3_STATUS 0x0e
#define MLX_V3_IDBR 0x40
#define MLX_V3_ODBR 0x41
#define MLX_V3_IER 0x43
#define MLX_V3_PUT_MAILBOX(sc, idx, val) bus_space_write_1(sc->mlx_btag, sc->mlx_bhandle, MLX_V3_MAILBOX + idx, val)
#define MLX_V3_GET_STATUS_IDENT(sc) bus_space_read_1 (sc->mlx_btag, sc->mlx_bhandle, MLX_V3_STATUS_IDENT)
#define MLX_V3_GET_STATUS(sc) bus_space_read_2 (sc->mlx_btag, sc->mlx_bhandle, MLX_V3_STATUS)
#define MLX_V3_GET_IDBR(sc) bus_space_read_1 (sc->mlx_btag, sc->mlx_bhandle, MLX_V3_IDBR)
#define MLX_V3_PUT_IDBR(sc, val) bus_space_write_1(sc->mlx_btag, sc->mlx_bhandle, MLX_V3_IDBR, val)
#define MLX_V3_GET_ODBR(sc) bus_space_read_1 (sc->mlx_btag, sc->mlx_bhandle, MLX_V3_ODBR)
#define MLX_V3_PUT_ODBR(sc, val) bus_space_write_1(sc->mlx_btag, sc->mlx_bhandle, MLX_V3_ODBR, val)
#define MLX_V3_PUT_IER(sc, val) bus_space_write_1(sc->mlx_btag, sc->mlx_bhandle, MLX_V3_IER, val)
#define MLX_V3_IDB_FULL (1<<0) /* mailbox is full */
#define MLX_V3_IDB_SACK (1<<1) /* acknowledge status read */
#define MLX_V3_ODB_SAVAIL (1<<0) /* status is available */
/*
* Accessor defines for the V4 interface.
*/
#define MLX_V4_MAILBOX 0x1000
#define MLX_V4_STATUS_IDENT 0x1018
#define MLX_V4_STATUS 0x101a
#define MLX_V4_IDBR 0x0020
#define MLX_V4_ODBR 0x002c
#define MLX_V4_IER 0x0034
/* use longword access? */
#define MLX_V4_PUT_MAILBOX(sc, idx, val) bus_space_write_1(sc->mlx_btag, sc->mlx_bhandle, MLX_V4_MAILBOX + idx, val)
#define MLX_V4_GET_STATUS_IDENT(sc) bus_space_read_1 (sc->mlx_btag, sc->mlx_bhandle, MLX_V4_STATUS_IDENT)
#define MLX_V4_GET_STATUS(sc) bus_space_read_2 (sc->mlx_btag, sc->mlx_bhandle, MLX_V4_STATUS)
#define MLX_V4_GET_IDBR(sc) bus_space_read_4 (sc->mlx_btag, sc->mlx_bhandle, MLX_V4_IDBR)
#define MLX_V4_PUT_IDBR(sc, val) bus_space_write_4(sc->mlx_btag, sc->mlx_bhandle, MLX_V4_IDBR, val)
#define MLX_V4_GET_ODBR(sc) bus_space_read_4 (sc->mlx_btag, sc->mlx_bhandle, MLX_V4_ODBR)
#define MLX_V4_PUT_ODBR(sc, val) bus_space_write_4(sc->mlx_btag, sc->mlx_bhandle, MLX_V4_ODBR, val)
#define MLX_V4_PUT_IER(sc, val) bus_space_write_4(sc->mlx_btag, sc->mlx_bhandle, MLX_V4_IER, val)
#define MLX_V4_IDB_FULL (1<<0) /* mailbox is full */
#define MLX_V4_IDB_HWMBOX_CMD (1<<0) /* posted hardware mailbox command */
#define MLX_V4_IDB_SACK (1<<1) /* acknowledge status read */
#define MLX_V4_IDB_MEMMBOX_CMD (1<<4) /* posted memory mailbox command */
#define MLX_V4_ODB_HWSAVAIL (1<<0) /* status is available for hardware mailbox */
#define MLX_V4_ODB_MEMSAVAIL (1<<1) /* status is available for memory mailbox */
#define MLX_V4_ODB_HWMBOX_ACK (1<<0) /* ack status read from hardware mailbox */
#define MLX_V4_ODB_MEMMBOX_ACK (1<<1) /* ack status read from memory mailbox */
#define MLX_V4_IER_MASK 0xfb /* message unit interrupt mask */
#define MLX_V4_IER_DISINT (1<<2) /* interrupt disable bit */
/*
* Scatter-gather list format, type 1, kind 00.
*/
struct mlx_sgentry
{
u_int32_t sg_addr;
u_int32_t sg_count;
} __attribute__ ((packed));
/*
* Command result buffers, as placed in system memory by the controller.
*/
struct mlx_enquiry /* MLX_CMD_ENQUIRY */
{
u_int8_t me_num_sys_drvs;
u_int8_t res1[3];
u_int32_t me_drvsize[32];
u_int16_t me_flash_age;
u_int8_t me_status_flags;
#define MLX_ENQ_SFLAG_DEFWRERR (1<<0) /* deferred write error indicator */
#define MLX_ENQ_SFLAG_BATTLOW (1<<1) /* battery low */
u_int8_t res2;
u_int8_t me_fwminor;
u_int8_t me_fwmajor;
u_int8_t me_rebuild_flag;
u_int8_t me_max_commands;
u_int8_t me_offline_sd_count;
u_int8_t res3;
u_int16_t me_event_log_seq_num;
u_int8_t me_critical_sd_count;
u_int8_t res4[3];
u_int8_t me_dead_count;
u_int8_t res5;
u_int8_t me_rebuild_count;
u_int8_t me_misc_flags;
#define MLX_ENQ_MISC_BBU (1<<3) /* battery backup present */
struct
{
u_int8_t dd_targ;
u_int8_t dd_chan;
} __attribute__ ((packed)) me_dead[20];
} __attribute__ ((packed));
struct mlx_enquiry2 /* MLX_CMD_ENQUIRY2 */
{
u_int32_t me_hardware_id;
u_int32_t me_firmware_id;
u_int32_t res1;
u_int8_t me_configured_channels;
u_int8_t me_actual_channels;
u_int8_t me_max_targets;
u_int8_t me_max_tags;
u_int8_t me_max_sys_drives;
u_int8_t me_max_arms;
u_int8_t me_max_spans;
u_int8_t res2;
u_int32_t res3;
u_int32_t me_mem_size;
u_int32_t me_cache_size;
u_int32_t me_flash_size;
u_int32_t me_nvram_size;
u_int16_t me_mem_type;
u_int16_t me_clock_speed;
u_int16_t me_mem_speed;
u_int16_t me_hardware_speed;
u_int8_t res4[10];
u_int16_t me_max_commands;
u_int16_t me_max_sg;
u_int16_t me_max_dp;
u_int16_t me_max_iod;
u_int16_t me_max_comb;
u_int8_t me_latency;
u_int8_t res5;
u_int8_t me_scsi_timeout;
u_int8_t res6;
u_int16_t me_min_freelines;
u_int8_t res7[8];
u_int8_t me_rate_const;
u_int8_t res8[11];
u_int16_t me_physblk;
u_int16_t me_logblk;
u_int16_t me_maxblk;
u_int16_t me_blocking_factor;
u_int16_t me_cacheline;
u_int8_t me_scsi_cap;
u_int8_t res9[5];
u_int16_t me_fimware_build;
u_int8_t me_fault_mgmt_type;
u_int8_t res10;
u_int32_t me_firmware_features;
u_int8_t res11[8];
} __attribute__ ((packed));
struct mlx_enq_sys_drive /* MLX_CMD_ENQSYSDRIVE returns an array of 32 of these */
{
u_int32_t sd_size;
u_int8_t sd_state;
u_int8_t sd_raidlevel;
u_int16_t res1;
} __attribute__ ((packed));
struct mlx_eventlog_entry /* MLX_CMD_LOGOP/MLX_LOGOP_GET */
{
u_int8_t el_type;
u_int8_t el_length;
u_char el_target:5;
u_char el_channel:3;
u_char el_lun:6;
u_char res1:2;
u_int16_t el_seqno;
u_char el_errorcode:7;
u_char el_valid:1;
u_int8_t el_segment;
u_char el_sensekey:4;
u_char res2:1;
u_char el_ILI:1;
u_char el_EOM:1;
u_char el_filemark:1;
u_int8_t el_information[4];
u_int8_t el_addsense;
u_int8_t el_csi[4];
u_int8_t el_asc;
u_int8_t el_asq;
u_int8_t res3[12];
} __attribute__ ((packed));
#define MLX_LOGOP_GET 0x00 /* operation codes for MLX_CMD_LOGOP */
#define MLX_LOGMSG_SENSE 0x00 /* log message contents codes */
struct mlx_rebuild_stat /* MLX_CMD_REBUILDSTAT */
{
u_int32_t rb_drive;
u_int32_t rb_size;
u_int32_t rb_remaining;
} __attribute__ ((packed));