freebsd-dev/sys/pci/if_tx.c
Jordan K. Hubbard f082783a66 Update to "stable-167" release; totally reimplements media detection.
Submitted by:	Ustimenko Semen <semen@iclub.nsu.ru>
1998-02-20 18:08:46 +00:00

1402 lines
33 KiB
C

/*-
* Copyright (c) 1997 Semen Ustimenko (semen@iclub.nsu.ru)
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* version: stable-167
*
*/
/*
* EtherPower II 10/100 Fast Ethernet (tx0)
* (aka SMC9432TX based on SMC83c170 EPIC chip)
*
* Written by Semen Ustimenko.
*
* TODO:
* Implement FULL IFF_MULTICAST support
* Calculate optimal RX and TX rings size
* Test, test and test again:)
*
*/
#include "pci.h"
#if NPCI > 0
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/sockio.h>
#include <net/if.h>
#include <net/if_media.h>
#include <net/if_mib.h>
#include <netinet/in.h>
#include <netinet/if_ether.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <machine/clock.h>
#include <pci/pcivar.h>
#include <pci/smc83c170.h>
#include "bpfilter.h"
#if NBPFILTER > 0
#include <net/bpf.h>
#endif
/*
* Global variables
*/
static u_long epic_pci_count;
static epic_softc_t * epics[EPIC_MAX_DEVICES];
static struct pci_device txdevice = {
"tx",
epic_pci_probe,
epic_pci_attach,
&epic_pci_count,
NULL };
/*
* Append this driver to pci drivers list
*/
DATA_SET ( pcidevice_set, txdevice );
/*
* ifioctl function
*
* splimp() invoked here
*/
static int
epic_ifioctl(register struct ifnet * ifp, int command, caddr_t data){
epic_softc_t *sc = ifp->if_softc;
struct ifreq *ifr = (struct ifreq *) data;
int x, error = 0;
x = splimp();
switch (command) {
case SIOCSIFADDR:
case SIOCGIFADDR:
ether_ioctl(ifp, command, data);
break;
case SIOCSIFFLAGS:
/*
* If the interface is marked up and stopped, then start it.
* If it is marked down and running, then stop it.
*/
if (ifp->if_flags & IFF_UP) {
if ((ifp->if_flags & IFF_RUNNING) == 0) {
epic_init(sc);
break;
}
} else {
if (ifp->if_flags & IFF_RUNNING) {
epic_stop(sc);
ifp->if_flags &= ~IFF_RUNNING;
break;
}
}
/* Handle IFF_PROMISC flag */
epic_set_rx_mode(sc);
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
/* Update out multicast list */
#if defined(__FreeBSD__) && __FreeBSD__ >= 3
epic_set_mc_table(sc);
error = 0;
#else
error = (command == SIOCADDMULTI) ?
ether_addmulti(ifr, &sc->epic_ac) :
ether_delmulti(ifr, &sc->epic_ac);
if (error == ENETRESET) {
epic_set_mc_table(sc);
error = 0;
}
#endif
break;
case SIOCSIFMTU:
/*
* Set the interface MTU.
*/
if (ifr->ifr_mtu > ETHERMTU) {
error = EINVAL;
} else {
ifp->if_mtu = ifr->ifr_mtu;
}
break;
case SIOCSIFMEDIA:
case SIOCGIFMEDIA:
error = ifmedia_ioctl(ifp, ifr, &sc->ifmedia, command);
break;
default:
error = EINVAL;
}
splx(x);
return error;
}
/*
* ifstart function
*
* splimp() assumed to be done
*/
static void
epic_ifstart(struct ifnet * const ifp){
epic_softc_t *sc = ifp->if_softc;
while( sc->pending_txs < TX_RING_SIZE ){
struct epic_tx_buffer *buf = sc->tx_buffer + sc->cur_tx;
struct epic_tx_desc *desc = sc->tx_desc + sc->cur_tx;
#if defined(TX_FRAG_LIST)
struct epic_frag_list *flist = sc->tx_flist + sc->cur_tx;
#endif
struct mbuf *m,*m0;
int len;
/* If descriptor is busy, set IFF_OACTIVE and exit */
if( desc->status & 0x8000 ) break;
/* Get next packet to send */
IF_DEQUEUE( &(sc->epic_if.if_snd), m );
/* If no more mbuf's to send, return */
if( NULL == m ) return;
/* Save mbuf header */
m0 = m;
#if defined(TX_FRAG_LIST)
if( buf->mbuf ) m_freem( buf->mbuf );
buf->mbuf = m;
flist->numfrags = 0;
for(len=0;(m0!=0)&&(flist->numfrags<63);m0=m0->m_next) {
flist->frag[flist->numfrags].fraglen = m0->m_len;
flist->frag[flist->numfrags].fragaddr =
vtophys( mtod(m0, caddr_t) );
len += m0->m_len;
flist->numfrags++;
}
/* Does not generate TXC unless ring is full more then a half */
desc->control = (sc->pending_txs>TX_RING_SIZE/2)?0x05:0x01;
#else
for (len = 0; m0 != 0; m0 = m0->m_next) {
bcopy(mtod(m0, caddr_t), buf->data + len, m0->m_len);
len += m0->m_len;
}
/* Does not generate TXC unless ring is full more then a half */
desc->control = (sc->pending_txs>TX_RING_SIZE/2)?0x14:0x10;
#endif
/* Packet should be at least ETHER_MIN_LEN */
desc->txlength = max(len,ETHER_MIN_LEN-ETHER_CRC_LEN);
/* Pass ownership to the chip */
desc->status = 0x8000;
/* Set watchdog timer */
ifp->if_timer = 2;
#if NBPFILTER > 0
if( ifp->if_bpf ) bpf_mtap( ifp, m );
#endif
#if !defined(TX_FRAG_LIST)
/* We don't need mbuf anyway */
m_freem( m );
#endif
/* Trigger an immediate transmit demand. */
outl( sc->iobase + COMMAND, COMMAND_TXQUEUED );
/* Packet queued successful */
sc->pending_txs++;
/* Switch to next descriptor */
sc->cur_tx = ( sc->cur_tx + 1 ) % TX_RING_SIZE;
}
sc->epic_if.if_flags |= IFF_OACTIVE;
return;
}
/*
* IFWATCHDOG function
*
* splimp() invoked here
*/
static void
epic_ifwatchdog(
struct ifnet *ifp)
{
epic_softc_t *sc = ifp->if_softc;
int x;
int i;
x = splimp();
printf("tx%d: device timeout %d packets\n",
sc->unit,sc->pending_txs);
ifp->if_oerrors+=sc->pending_txs;
epic_stop(sc);
epic_init(sc);
epic_ifstart(&sc->epic_if);
splx(x);
}
/*
*
* splimp() invoked before epic_intr_normal()
*/
static inline void
epic_rx_done __P((
epic_softc_t *sc ))
{
int i = 0;
u_int16_t len;
struct epic_rx_buffer *buf;
struct epic_rx_desc *desc;
struct mbuf *m;
#if defined(RX_TO_MBUF)
struct mbuf *m0;
#endif
struct ether_header *eh;
int stt;
while( !(sc->rx_desc[sc->cur_rx].status & 0x8000) && \
i++ < RX_RING_SIZE ){
buf = sc->rx_buffer + sc->cur_rx;
desc = sc->rx_desc + sc->cur_rx;
stt = desc->status;
/* Check for errors */
if( !(desc->status & 1) ) {
sc->epic_if.if_ierrors++;
goto rxerror;
}
/* This is received frame actual length */
len = desc->rxlength - ETHER_CRC_LEN;
#if defined(RX_TO_MBUF)
/* Try to allocate mbuf cluster */
MGETHDR(m0,M_DONTWAIT,MT_DATA);
if( NULL == m0 ) {
printf("tx%d: cannot allocate mbuf header\n",sc->unit);
sc->epic_if.if_ierrors++;
goto rxerror;
}
MCLGET(m0,M_DONTWAIT);
if( NULL == (m0->m_flags & M_EXT) ){
printf("tx%d: cannot allocate mbuf cluster\n",sc->unit);
m_freem(m0);
sc->epic_if.if_ierrors++;
goto rxerror;
}
/* Swap new allocated mbuf with mbuf, containing packet */
m = buf->mbuf;
buf->mbuf = m0;
/* Insert new allocated mbuf into device queue */
desc->bufaddr = vtophys( mtod( buf->mbuf, caddr_t ) );
#else
/* Allocate mbuf to pass to OS */
MGETHDR(m, M_DONTWAIT, MT_DATA);
if( NULL == m ){
printf("tx%d: cannot allocate mbuf header\n",sc->unit);
sc->epic_if.if_ierrors++;
goto rxerror;
}
if( len > MHLEN ){
MCLGET(m,M_DONTWAIT);
if( NULL == (m->m_flags & M_EXT) ){
printf("tx%d: cannot allocate mbuf cluster\n",
sc->unit);
m_freem( m );
sc->epic_if.if_ierrors++;
goto rxerror;
}
}
/* Copy packet to new allocated mbuf */
memcpy( mtod(m,void*), buf->data, len );
#endif
/* First mbuf in packet holds the ethernet and packet headers */
eh = mtod( m, struct ether_header * );
m->m_pkthdr.rcvif = &(sc->epic_if);
m->m_pkthdr.len = len;
m->m_len = len;
#if NBPFILTER > 0
/* Give mbuf to BPFILTER */
if( sc->epic_if.if_bpf ) bpf_mtap( &sc->epic_if, m );
/* Accept only our packets, broadcasts and multicasts */
if( (eh->ether_dhost[0] & 1) == 0 &&
bcmp(eh->ether_dhost,sc->epic_ac.ac_enaddr,ETHER_ADDR_LEN)){
m_freem(m);
goto rxerror;
}
#endif
/* Second mbuf holds packet ifself */
m->m_pkthdr.len = len - sizeof(struct ether_header);
m->m_len = len - sizeof( struct ether_header );
m->m_data += sizeof( struct ether_header );
/* Give mbuf to OS */
ether_input(&sc->epic_if, eh, m);
/* Successfuly received frame */
sc->epic_if.if_ipackets++;
rxerror:
/* Mark current descriptor as free */
desc->rxlength = 0;
desc->status = 0x8000;
/* Switch to next descriptor */
sc->cur_rx = (sc->cur_rx+1) % RX_RING_SIZE;
}
return;
}
/*
*
* splimp() invoked before epic_intr_normal()
*/
static inline void
epic_tx_done __P((
epic_softc_t *sc ))
{
int i = 0;
u_int32_t if_flags=~0;
int coll;
u_int16_t stt;
while( i++ < TX_RING_SIZE ){
struct epic_tx_buffer *buf = sc->tx_buffer + sc->dirty_tx;
struct epic_tx_desc *desc = sc->tx_desc + sc->dirty_tx;
#if defined(TX_FRAG_LIST)
struct epic_frag_list *flist = sc->tx_flist + sc->dirty_tx;
#endif
u_int16_t len = desc->txlength;
stt = desc->status;
if( stt & 0x8000 )
break; /* following packets are not Txed yet */
if( stt == 0 ){
if_flags = ~IFF_OACTIVE;
break;
}
sc->pending_txs--; /* packet is finished */
sc->dirty_tx = (sc->dirty_tx + 1) % TX_RING_SIZE;
coll = (stt >> 8) & 0xF; /* number of collisions*/
if( stt & 0x0001 ){
sc->epic_if.if_opackets++;
} else {
if(stt & 0x0008)
sc->dot3stats.dot3StatsCarrierSenseErrors++;
if(stt & 0x1050)
sc->dot3stats.dot3StatsInternalMacTransmitErrors++;
if(stt & 0x1000) coll = 16;
sc->epic_if.if_oerrors++;
}
if(stt & 0x0002) /* What does it mean? */
sc->dot3stats.dot3StatsDeferredTransmissions++;
sc->epic_if.if_collisions += coll;
switch( coll ){
case 0:
break;
case 16:
sc->dot3stats.dot3StatsExcessiveCollisions++;
sc->dot3stats.dot3StatsCollFrequencies[15]++;
break;
case 1:
sc->dot3stats.dot3StatsSingleCollisionFrames++;
sc->dot3stats.dot3StatsCollFrequencies[0]++;
break;
default:
sc->dot3stats.dot3StatsMultipleCollisionFrames++;
sc->dot3stats.dot3StatsCollFrequencies[coll-1]++;
break;
}
desc->status = 0;
desc->txlength = 0;
#if defined(TX_FRAG_LIST)
flist->numfrags = 0;
m_freem( buf->mbuf );
buf->mbuf = NULL;
#endif
if_flags = ~IFF_OACTIVE;
}
sc->epic_if.if_flags &= if_flags;
if( !(sc->epic_if.if_flags & IFF_OACTIVE) )
epic_ifstart( &sc->epic_if );
}
/*
* Interrupt function
*
* splimp() assumed to be done
*/
static void
epic_intr_normal(
void *arg)
{
epic_softc_t * sc = (epic_softc_t *) arg;
int iobase = sc->iobase;
int status;
status = inl(iobase + INTSTAT);
outl( iobase + INTSTAT, status & (
INTSTAT_RQE|INTSTAT_HCC|INTSTAT_RCC|
INTSTAT_TXC|INTSTAT_TCC|INTSTAT_TQE|
INTSTAT_FATAL|INTSTAT_GP2|
INTSTAT_CNT|INTSTAT_TXU|INTSTAT_OVW|INTSTAT_RXE ) );
if( status & (INTSTAT_RQE|INTSTAT_HCC|INTSTAT_RCC) ) {
epic_rx_done( sc );
if( status & INTSTAT_RQE )
outl( iobase + COMMAND, COMMAND_RXQUEUED );
}
if( status & (INTSTAT_TXC|INTSTAT_TCC|INTSTAT_TQE) )
epic_tx_done( sc );
if( (status & INTSTAT_TQE) && !(sc->epic_if.if_flags & IFF_OACTIVE) )
epic_ifstart( &sc->epic_if );
if( (status & INTSTAT_GP2) && (QS6612_OUI == sc->phyid) ) {
u_int32_t status;
status = epic_read_phy_register(sc->iobase,29);
if( (status & INTSTAT_AN_COMPLETE) &&
(epic_autoneg(sc) == EPIC_FULL_DUPLEX) ) {
status = BMCR_FULL_DUPLEX | epic_read_phy_register( sc->iobase, DP83840_BMCR );
outl( sc->iobase + TXCON,
TXCON_LOOPBACK_MODE_FULL_DUPLEX|TXCON_DEFAULT );
} else
status = ~BMCR_FULL_DUPLEX & epic_read_phy_register( sc->iobase, DP83840_BMCR );
/* There is apparently QS6612 chip bug: */
/* BMCR_FULL_DUPLEX flag is not updated by */
/* autonegotiation process, so update manual */
epic_write_phy_register( sc->iobase, DP83840_BMCR, status);
/* We should clear GP2 int source after we clear it on PHY */
outl( iobase + INTSTAT, INTSTAT_GP2 );
}
if( status & (INTSTAT_FATAL|INTSTAT_PMA|INTSTAT_PTA|INTSTAT_APE|INTSTAT_DPE) ){
int j;
struct epic_tx_desc *desc;
printf("tx%d: PCI fatal error occured (%s%s%s%s)\n",
sc->unit,
(status&INTSTAT_PMA)?"PMA":"",
(status&INTSTAT_PTA)?" PTA":"",
(status&INTSTAT_APE)?" APE":"",
(status&INTSTAT_DPE)?" DPE":"");
#if defined(EPIC_DEBUG)
printf("tx%d: dumping descriptors\n",sc->unit);
for(j=0;j<TX_RING_SIZE;j++){
desc = sc->tx_desc + j;
printf("desc%d: %d %04x, %08x, %04x %d, %08x\n",
j,
desc->txlength,desc->status,
desc->bufaddr,
desc->control,desc->buflength,
desc->next
);
}
#endif
epic_stop(sc);
epic_init(sc);
return;
}
/* UPDATE statistics */
if (status & (INTSTAT_CNT | INTSTAT_TXU | INTSTAT_OVW | INTSTAT_RXE)) {
/* update dot3 Rx statistics */
sc->dot3stats.dot3StatsMissedFrames += inb(iobase + MPCNT);
sc->dot3stats.dot3StatsFrameTooLongs += inb(iobase + ALICNT);
sc->dot3stats.dot3StatsFCSErrors += inb(iobase + CRCCNT);
/* Update if Rx statistics */
if (status & (INTSTAT_OVW | INTSTAT_RXE))
sc->epic_if.if_ierrors++;
/* Tx FIFO underflow. */
if (status & INTSTAT_TXU) {
/* Inc. counters */
sc->dot3stats.dot3StatsInternalMacTransmitErrors++;
sc->epic_if.if_oerrors++;
/* Restart the transmit process. */
outl(iobase + COMMAND, COMMAND_TXUGO);
}
}
/* If no packets are pending, thus no timeouts */
if( sc->pending_txs == 0 )
sc->epic_if.if_timer = 0;
return;
}
/*
* Probe function
*/
static char*
epic_pci_probe(
pcici_t config_id,
pcidi_t device_id)
{
if( PCI_VENDORID(device_id) != SMC_VENDORID )
return NULL;
if( PCI_CHIPID(device_id) == CHIPID_83C170 )
return "SMC 83c170";
return NULL;
}
/*
* PCI_Attach function
*
* splimp() invoked here
*/
static void
epic_pci_attach(
pcici_t config_id,
int unit)
{
struct ifnet * ifp;
epic_softc_t *sc;
u_int32_t iobase;
u_int32_t irq;
int i,s,media;
u_int32_t pool;
/*
* Get iobase and irq level
*/
irq = PCI_CONF_READ(PCI_CFIT) & (0xFF);
if (!pci_map_port(config_id, PCI_CBIO,(u_short *) &iobase))
return;
/* Allocate memory for softc and hardware descriptors */
sc = (epic_softc_t *) malloc(
sizeof(epic_softc_t) +
#if defined(TX_FRAG_LIST)
sizeof(struct epic_frag_list)*TX_RING_SIZE +
#endif
sizeof(struct epic_rx_desc)*RX_RING_SIZE +
sizeof(struct epic_tx_desc)*TX_RING_SIZE + PAGE_SIZE,
M_DEVBUF, M_NOWAIT);
if (sc == NULL) return;
/* Align pool on PAGE_SIZE */
pool = ((u_int32_t)sc)+sizeof(epic_softc_t);
pool = (pool + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1);
/* Preinitialize softc structure */
bzero(sc, sizeof(epic_softc_t));
epics[ unit ] = sc;
sc->unit = unit;
sc->iobase = iobase;
sc->irq = irq;
#if defined(TX_FRAG_LIST)
sc->tx_flist = (void *)pool;
pool += sizeof(struct epic_frag_list)*TX_RING_SIZE;
#endif
sc->rx_desc = (void *)pool;
pool += sizeof(struct epic_rx_desc)*RX_RING_SIZE;
sc->tx_desc = (void *)pool;
/* Bring the chip out of low-power mode. */
outl( iobase + GENCTL, 0x0000 );
/* Magic?! If we don't set this bit the MII interface won't work. */
outl( iobase + TEST1, 0x0008 );
/* Read mac address (may be better is read from EEPROM?) */
for (i = 0; i < ETHER_ADDR_LEN / sizeof( u_int16_t); i++)
((u_int16_t *)sc->epic_macaddr)[i] = inw(iobase + LAN0 + i*4);
/* Display some info */
printf("tx%d: address %02x:%02x:%02x:%02x:%02x:%02x,",sc->unit,
sc->epic_macaddr[0],sc->epic_macaddr[1],sc->epic_macaddr[2],
sc->epic_macaddr[3],sc->epic_macaddr[4],sc->epic_macaddr[5]);
s = splimp();
/* Map interrupt */
if( !pci_map_int(config_id, epic_intr_normal, (void*)sc, &net_imask) ) {
printf("tx%d: couldn't map interrupt\n",unit);
epics[ unit ] = NULL;
free(sc, M_DEVBUF);
return;
}
/* Fill ifnet structure */
ifp = &sc->epic_if;
ifp->if_unit = unit;
ifp->if_name = "tx";
ifp->if_softc = sc;
ifp->if_flags = IFF_BROADCAST|IFF_SIMPLEX|IFF_MULTICAST;
ifp->if_ioctl = epic_ifioctl;
ifp->if_start = epic_ifstart;
ifp->if_watchdog = epic_ifwatchdog;
ifp->if_init = (if_init_f_t*)epic_init;
ifp->if_timer = 0;
ifp->if_output = ether_output;
ifp->if_linkmib = &sc->dot3stats;
ifp->if_linkmiblen = sizeof(struct ifmib_iso_8802_3);
sc->dot3stats.dot3StatsEtherChipSet =
DOT3CHIPSET(dot3VendorSMC,
dot3ChipSetSMC83c170);
sc->dot3stats.dot3Compliance = DOT3COMPLIANCE_COLLS;
printf(" type SMC9432TX, ");
/* Identify PHY */
sc->phyid = epic_read_phy_register(iobase,DP83840_PHYIDR1)<<6;
sc->phyid|= ((epic_read_phy_register(iobase,DP83840_PHYIDR2)>>10)&0x3F);
if( QS6612_OUI == sc->phyid ){
printf("phy QS6612, ");
} else if( DP83840_OUI == sc->phyid ){
printf("phy DP83840, ");
} else {
printf("phy: unknown (%x), ",sc->phyid);
sc->phyid = DP83840_OUI;
}
/* Read current config */
i = epic_read_phy_register(iobase, DP83840_BMCR);
media = IFM_ETHER;
if( i & BMCR_AUTONEGOTIATION ){
i = epic_read_phy_register( iobase, DP83840_LPAR );
printf("Auto-Neg ");
if( i & (ANAR_100_TX|ANAR_100_TX_FD) )
printf("100Mbps ");
else
printf("10Mbps ");
if( i & (ANAR_10_FD|ANAR_100_TX_FD) ) printf("FD");
media |= IFM_AUTO;
} else {
if( i & BMCR_100MBPS ) {
printf("100Mbps ");
media |= IFM_100_TX;
} else {
printf("10Mbps ");
media |= IFM_10_T;
}
if( i & BMCR_FULL_DUPLEX ) {
printf("FD");
media |= IFM_FDX;
}
}
printf("\n");
/* init ifmedia interface */
ifmedia_init(&sc->ifmedia,0,epic_ifmedia_change,epic_ifmedia_status);
ifmedia_add(&sc->ifmedia,IFM_ETHER|IFM_10_T,0,NULL);
ifmedia_add(&sc->ifmedia,IFM_ETHER|IFM_10_T|IFM_FDX,0,NULL);
ifmedia_add(&sc->ifmedia,IFM_ETHER|IFM_100_TX,0,NULL);
ifmedia_add(&sc->ifmedia,IFM_ETHER|IFM_100_TX|IFM_FDX,0,NULL);
ifmedia_add(&sc->ifmedia,IFM_ETHER|IFM_AUTO,0,NULL);
ifmedia_set(&sc->ifmedia, media);
/* Read MBSR twice to update latched bits */
epic_read_phy_register(iobase,DP83840_BMSR);
i=epic_read_phy_register(iobase,DP83840_BMSR);
if( !(i & BMSR_LINK_STATUS) )
printf("tx%d: WARNING! no link estabilished\n",sc->unit);
/* Set shut down routine to stop DMA processes on reboot */
at_shutdown(epic_shutdown, sc, SHUTDOWN_POST_SYNC);
/*
* Attach to if manager
*/
if_attach(ifp);
ether_ifattach(ifp);
#if NBPFILTER > 0
bpfattach(ifp,DLT_EN10MB, sizeof(struct ether_header));
#endif
splx(s);
return;
}
static int
epic_ifmedia_change __P((
struct ifnet * ifp))
{
if (IFM_TYPE(((epic_softc_t *)(ifp->if_softc))->ifmedia.ifm_media) != IFM_ETHER)
return (EINVAL);
epic_set_media_speed( ifp->if_softc );
return 0;
}
static void
epic_ifmedia_status __P((
struct ifnet * ifp,
struct ifmediareq *ifmr))
{
epic_softc_t *sc = ifp->if_softc;
u_int32_t bmcr;
u_int32_t bmsr;
bmcr = epic_read_phy_register( sc->iobase, DP83840_BMCR );
epic_read_phy_register(sc->iobase,DP83840_BMSR);
bmsr = epic_read_phy_register(sc->iobase,DP83840_BMSR);
ifmr->ifm_active = IFM_ETHER;
if( !(bmsr & BMSR_LINK_STATUS) ) {
ifmr->ifm_active |= bmcr&BMCR_AUTONEGOTIATION?IFM_AUTO:IFM_NONE;
return;
}
ifmr->ifm_active |= bmcr&BMCR_100MBPS?IFM_100_TX:IFM_10_T;
ifmr->ifm_active |= bmcr&BMCR_FULL_DUPLEX?IFM_FDX:0;
}
/*
* IFINIT function
*
* splimp() invoked here
*/
static int
epic_init(
epic_softc_t * sc)
{
struct ifnet *ifp = &sc->epic_if;
int iobase = sc->iobase;
int i,s;
s = splimp();
/* Soft reset the chip */
outl(iobase + GENCTL, GENCTL_SOFT_RESET );
/* Reset takes 15 pci ticks which depends on processor speed*/
DELAY(1);
/* Wake up */
outl( iobase + GENCTL, 0 );
/* ?????? */
outl( iobase + TEST1, 0x0008);
/* Initialize rings */
if( -1 == epic_init_rings( sc ) ) {
printf("tx%d: failed to initialize rings\n",sc->unit);
epic_free_rings( sc );
splx(s);
return -1;
}
/* Put node address to EPIC */
outl( iobase + LAN0 + 0x0, ((u_int16_t *)sc->epic_macaddr)[0] );
outl( iobase + LAN0 + 0x4, ((u_int16_t *)sc->epic_macaddr)[1] );
outl( iobase + LAN0 + 0x8, ((u_int16_t *)sc->epic_macaddr)[2] );
/* Set transmit threshold */
outl( iobase + ETXTHR, 0x40 );
/* Compute and set RXCON. */
epic_set_rx_mode( sc );
/* Set media speed mode */
epic_set_media_speed( sc );
/* Set multicast table */
epic_set_mc_table( sc );
/* Enable interrupts by setting the interrupt mask. */
if( QS6612_OUI == sc->phyid ) {
outl( iobase + INTMASK,
INTSTAT_RCC | INTSTAT_RQE | INTSTAT_OVW | INTSTAT_RXE |
INTSTAT_TXC | INTSTAT_TCC | INTSTAT_TQE | INTSTAT_TXU |
INTSTAT_CNT | INTSTAT_GP2 | INTSTAT_FATAL |
INTSTAT_PTA | INTSTAT_PMA | INTSTAT_APE | INTSTAT_DPE );
} else {
outl( iobase + INTMASK,
INTSTAT_RCC | INTSTAT_RQE | INTSTAT_OVW | INTSTAT_RXE |
INTSTAT_TXC | INTSTAT_TCC | INTSTAT_TQE | INTSTAT_TXU |
INTSTAT_CNT | INTSTAT_FATAL |
INTSTAT_PTA | INTSTAT_PMA | INTSTAT_APE | INTSTAT_DPE );
}
/* Enable interrupts, set for PCI read multiple and etc */
outl( iobase + GENCTL,
GENCTL_ENABLE_INTERRUPT | GENCTL_MEMORY_READ_MULTIPLE |
GENCTL_ONECOPY | GENCTL_RECEIVE_FIFO_THRESHOLD64 );
/* Start rx process */
outl( iobase + COMMAND, COMMAND_RXQUEUED | COMMAND_START_RX );
/* Mark interface running ... */
if( ifp->if_flags & IFF_UP ) ifp->if_flags |= IFF_RUNNING;
else ifp->if_flags &= ~IFF_RUNNING;
/* ... and free */
ifp->if_flags &= ~IFF_OACTIVE;
splx(s);
return 0;
}
/*
* This function should set EPIC's registers according IFF_* flags
*/
static void
epic_set_rx_mode(
epic_softc_t * sc)
{
struct ifnet *ifp = &sc->epic_if;
u_int16_t rxcon = 0;
#if NBPFILTER > 0
if( sc->epic_if.if_flags & IFF_PROMISC )
rxcon |= RXCON_PROMISCUOUS_MODE;
#endif
if( sc->epic_if.if_flags & IFF_BROADCAST )
rxcon |= RXCON_RECEIVE_BROADCAST_FRAMES;
if( sc->epic_if.if_flags & IFF_MULTICAST )
rxcon |= RXCON_RECEIVE_MULTICAST_FRAMES;
outl( sc->iobase + RXCON, rxcon );
return;
}
/*
* This function should set MII to mode specified by IFF_LINK* flags
*/
static void
epic_set_media_speed __P((
epic_softc_t * sc))
{
u_int32_t tgtmedia = sc->ifmedia.ifm_cur->ifm_media;
u_int16_t media;
u_int32_t i;
/* Reset PHY */
epic_write_phy_register( sc->iobase, DP83840_BMCR, BMCR_RESET );
for(i=0;i<0x100000;i++) if( !(epic_read_phy_register(sc->iobase,DP83840_BMCR)&BMCR_RESET) ) break;
if( epic_read_phy_register(sc->iobase, DP83840_BMCR) & BMCR_RESET )
printf("tx%d: WARNING! cannot reset PHY\n",sc->unit);
/* Set media speed */
if( IFM_SUBTYPE(tgtmedia) != IFM_AUTO ){
/* Set mode */
media = (IFM_SUBTYPE(tgtmedia)==IFM_100_TX) ? BMCR_100MBPS : 0;
media|= ((tgtmedia&IFM_GMASK)==IFM_FDX) ? BMCR_FULL_DUPLEX : 0;
sc->epic_if.if_baudrate =
(tgtmedia&IFM_100_TX) ? 100000000 : 10000000;
epic_write_phy_register( sc->iobase, DP83840_BMCR, media );
outl( sc->iobase + TXCON,(tgtmedia&IFM_FDX)?TXCON_LOOPBACK_MODE_FULL_DUPLEX|TXCON_DEFAULT:TXCON_DEFAULT );
} else {
/* Init QS6612 to generate interrupt when AutoNeg complete */
if( QS6612_OUI == sc->phyid ) {
outl( sc->iobase + NVCTL, NVCTL_GP1_OUTPUT_ENABLE );
epic_read_phy_register( sc->iobase, QS6612_INTSTAT );
epic_write_phy_register( sc->iobase, QS6612_INTMASK,
INTMASK_THUNDERLAN|INTSTAT_AN_COMPLETE );
}
sc->epic_if.if_baudrate = 100000000;
outl( sc->iobase + TXCON, TXCON_DEFAULT );
/* Set and restart autoneg */
epic_write_phy_register( sc->iobase, DP83840_BMCR,
BMCR_AUTONEGOTIATION | BMCR_RESTART_AUTONEG );
/* If it is not QS6612 PHY, try to get result of autoneg. */
if( QS6612_OUI != sc->phyid ) {
/* Wait 3 seconds for the autoneg to finish
* This is the recommended time from the DP83840A data
* sheet Section 7.1
*/
DELAY(3000000);
if( epic_autoneg(sc) == EPIC_FULL_DUPLEX )
outl( sc->iobase + TXCON,
TXCON_LOOPBACK_MODE_FULL_DUPLEX|TXCON_DEFAULT);
}
/* Else it will be done when GP2 int occured */
}
return;
}
/*
* This functions get results of the autoneg processes of the phy
* It implements the workaround that is described in section 7.2 & 7.3 of the
* DP83840A data sheet
* http://www.national.com/ds/DP/DP83840A.pdf
*/
static int
epic_autoneg(
epic_softc_t * sc)
{
struct ifnet *ifp = &sc->epic_if;
u_int16_t media;
u_int16_t i;
/* BMSR must be read twice to update the link status bit
* since that bit is a latch bit
*/
epic_read_phy_register( sc->iobase, DP83840_BMSR);
i = epic_read_phy_register( sc->iobase, DP83840_BMSR);
if ((i & BMSR_LINK_STATUS) && (i & BMSR_AUTONEG_COMPLETE)){
i = epic_read_phy_register( sc->iobase, DP83840_LPAR );
if ( i & (ANAR_100_TX_FD|ANAR_10_FD) )
return EPIC_FULL_DUPLEX;
else
return EPIC_HALF_DUPLEX;
}
else { /*Auto-negotiation or link status is not 1
Thus the auto-negotiation failed and one
must take other means to fix it.
*/
/* ANER must be read twice to get the correct reading for the
* Multiple link fault bit -- it is a latched bit
*/
epic_read_phy_register (sc->iobase, DP83840_ANER);
i = epic_read_phy_register (sc->iobase, DP83840_ANER);
if ( i & ANER_MULTIPLE_LINK_FAULT ) {
/* it can be forced to 100Mb/s Half-Duplex */
media = epic_read_phy_register(sc->iobase,DP83840_BMCR);
media &= ~(BMCR_AUTONEGOTIATION | BMCR_FULL_DUPLEX);
media |= BMCR_100MBPS;
epic_write_phy_register(sc->iobase,DP83840_BMCR,media);
/* read BMSR again to determine link status */
epic_read_phy_register(sc->iobase, DP83840_BMSR);
i=epic_read_phy_register( sc->iobase, DP83840_BMSR);
if (i & BMSR_LINK_STATUS){
/* port is linked to the non Auto-Negotiation
* 100Mbs partner.
*/
return EPIC_HALF_DUPLEX;
}
else {
media = epic_read_phy_register (sc->iobase, DP83840_BMCR);
media &= ~(BMCR_AUTONEGOTIATION | BMCR_FULL_DUPLEX | BMCR_100MBPS);
epic_write_phy_register(sc->iobase, DP83840_BMCR, media);
epic_read_phy_register(sc->iobase, DP83840_BMSR);
i=epic_read_phy_register( sc->iobase, DP83840_BMSR);
if (i & BMSR_LINK_STATUS) {
/*port is linked to the non
* Auto-Negotiation10Mbs partner
*/
return EPIC_HALF_DUPLEX;
}
}
}
/* If we get here we are most likely not connected
* so lets default it to half duplex
*/
return EPIC_HALF_DUPLEX;
}
}
/*
* This function sets EPIC multicast table
*/
static void
epic_set_mc_table (
epic_softc_t * sc)
{
struct ifnet *ifp = &sc->epic_if;
if( ifp->if_flags & IFF_MULTICAST ){
outl( sc->iobase + MC0, 0xFFFF );
outl( sc->iobase + MC1, 0xFFFF );
outl( sc->iobase + MC2, 0xFFFF );
outl( sc->iobase + MC3, 0xFFFF );
}
return;
}
static void
epic_shutdown(
int howto,
void *sc)
{
epic_stop(sc);
}
/*
* This function should completely stop rx and tx processes
*
* splimp() invoked here
*/
static void
epic_stop(
epic_softc_t * sc)
{
int iobase = sc->iobase;
int i,s;
s = splimp();
sc->epic_if.if_timer = 0;
/* Disable interrupts, stop processes */
outl( iobase + INTMASK, 0 );
outl( iobase + GENCTL, 0 );
outl( iobase + COMMAND,
COMMAND_STOP_RX | COMMAND_STOP_RDMA | COMMAND_STOP_TDMA );
/* Wait RX and TX DMA to stop */
for(i=0;i<0x100000;i++){
if( (inl(iobase+INTSTAT)&(INTSTAT_RXIDLE|INTSTAT_TXIDLE)) ==
(INTSTAT_RXIDLE|INTSTAT_TXIDLE) ) break;
}
if( !(inl(iobase+INTSTAT)&INTSTAT_RXIDLE) )
printf("tx%d: can't stop RX DMA\n",sc->unit);
if( !(inl(iobase+INTSTAT)&INTSTAT_TXIDLE) )
printf("tx%d: can't stop TX DMA\n",sc->unit);
/* Reset chip and phy */
outl( iobase + GENCTL, GENCTL_SOFT_RESET );
/* Need to wait for 15 pci ticks to pass before accessing again*/
DELAY(1);
/* Free memory allocated for rings */
epic_free_rings( sc );
splx(s);
}
/*
* This function should free all allocated for rings memory.
* NB: The DMA processes must be stopped.
*
* splimp() assumed to be done
*/
static void
epic_free_rings(epic_softc_t * sc){
int i;
for(i=0;i<RX_RING_SIZE;i++){
struct epic_rx_buffer *buf = sc->rx_buffer + i;
struct epic_rx_desc *desc = sc->rx_desc + i;
desc->status = 0;
desc->buflength = 0;
desc->bufaddr = 0;
#if defined(RX_TO_MBUF)
if( buf->mbuf ) m_freem( buf->mbuf );
buf->mbuf = NULL;
#else
if( buf->data ) free( buf->data, M_DEVBUF );
buf->data = NULL;
#endif
}
for(i=0;i<TX_RING_SIZE;i++){
struct epic_tx_buffer *buf = sc->tx_buffer + i;
struct epic_tx_desc *desc = sc->tx_desc + i;
desc->status = 0;
desc->buflength = 0;
desc->bufaddr = 0;
#if defined(TX_FRAG_LIST)
if( buf->mbuf ) m_freem( buf->mbuf );
buf->mbuf = NULL;
#else
if( buf->data ) free( buf->data, M_DEVBUF );
buf->data = NULL;
#endif
}
}
/*
* Initialize Rx and Tx rings and give them to EPIC
*
* If RX_TO_MBUF option is enabled, mbuf cluster is allocated instead of
* static buffer for RX ringi element.
* If TX_FRAG_LIST option is enabled, nothig is done, except chaining
* descriptors to ring and point them to static fraglists.
*
* splimp() assumed to be done
*/
static int
epic_init_rings(epic_softc_t * sc){
int i;
struct mbuf *m;
sc->cur_rx = sc->cur_tx = sc->dirty_tx = sc->pending_txs = 0;
for (i = 0; i < RX_RING_SIZE; i++) {
struct epic_rx_buffer *buf = sc->rx_buffer + i;
struct epic_rx_desc *desc = sc->rx_desc + i;
desc->status = 0; /* Owned by driver */
desc->next = vtophys( sc->rx_desc + ((i+1)%RX_RING_SIZE) );
if( (desc->next & 3) ||
((desc->next & 0xFFF) + sizeof(struct epic_rx_desc) > 0x1000 ) )
printf("tx%d: WARNING! frag_list is misbound or misaligned\n",sc->unit);
#if defined(RX_TO_MBUF)
MGETHDR(buf->mbuf,M_DONTWAIT,MT_DATA);
if( NULL == buf->mbuf ) return -1;
MCLGET(buf->mbuf,M_DONTWAIT);
if( NULL == (buf->mbuf->m_flags & M_EXT) ) return -1;
desc->bufaddr = vtophys( mtod(buf->mbuf,caddr_t) );
#else
buf->data = malloc(ETHER_MAX_FRAME_LEN, M_DEVBUF, M_NOWAIT);
if( buf->data == NULL ) return -1;
desc->bufaddr = vtophys( buf->data );
#endif
desc->buflength = ETHER_MAX_FRAME_LEN;
desc->status = 0x8000; /* Give to EPIC */
}
for (i = 0; i < TX_RING_SIZE; i++) {
struct epic_tx_buffer *buf = sc->tx_buffer + i;
struct epic_tx_desc *desc = sc->tx_desc + i;
desc->status = 0;
desc->next = vtophys( sc->tx_desc + ( (i+1)%TX_RING_SIZE ) );
if( (desc->next & 3) ||
((desc->next & 0xFFF) + sizeof(struct epic_tx_desc) > 0x1000 ) )
printf("tx%d: WARNING! frag_list is misbound or misaligned\n",sc->unit);
#if defined(TX_FRAG_LIST)
buf->mbuf = NULL;
desc->bufaddr = vtophys( sc->tx_flist + i );
if( (desc->bufaddr & 3) ||
((desc->bufaddr & 0xFFF) + sizeof(struct epic_frag_list) > 0x1000 ) )
printf("tx%d: WARNING! frag_list is misbound or misaligned\n",sc->unit);
#else
/* Allocate buffer */
buf->data = malloc(ETHER_MAX_FRAME_LEN, M_DEVBUF, M_NOWAIT);
if( buf->data == NULL ) return -1;
desc->bufaddr = vtophys( buf->data );
desc->buflength = ETHER_MAX_FRAME_LEN;
#endif
}
/* Give rings to EPIC */
outl( sc->iobase + PRCDAR, vtophys( sc->rx_desc ) );
outl( sc->iobase + PTCDAR, vtophys( sc->tx_desc ) );
return 0;
}
/*
* EEPROM operation functions
*/
static void epic_write_eepromreg(u_int16_t regaddr, u_int8_t val){
u_int16_t i;
outb( regaddr, val );
for( i=0;i<0xFF; i++)
if( !(inb( regaddr ) & 0x20) ) break;
return;
}
static u_int8_t epic_read_eepromreg(u_int16_t regaddr){
return inb( regaddr );
}
static u_int8_t epic_eeprom_clock( u_int16_t ioaddr, u_int8_t val ){
epic_write_eepromreg( ioaddr + EECTL, val );
epic_write_eepromreg( ioaddr + EECTL, (val | 0x4) );
epic_write_eepromreg( ioaddr + EECTL, val );
return epic_read_eepromreg( ioaddr + EECTL );
}
static void epic_output_eepromw(u_int16_t ioaddr, u_int16_t val){
int i;
for( i = 0xF; i >= 0; i--){
if( (val & (1 << i)) ) epic_eeprom_clock( ioaddr, 0x0B );
else epic_eeprom_clock( ioaddr, 3);
}
}
static u_int16_t epic_input_eepromw(u_int16_t ioaddr){
int i;
int tmp;
u_int16_t retval = 0;
for( i = 0xF; i >= 0; i--) {
tmp = epic_eeprom_clock( ioaddr, 0x3 );
if( tmp & 0x10 ){
retval |= (1 << i);
}
}
return retval;
}
static int epic_read_eeprom(u_int16_t ioaddr, u_int16_t loc){
int i;
u_int16_t dataval;
u_int16_t read_cmd;
epic_write_eepromreg(ioaddr + EECTL , 3);
if( epic_read_eepromreg(ioaddr + EECTL) & 0x40 )
read_cmd = ( loc & 0x3F ) | 0x180;
else
read_cmd = ( loc & 0xFF ) | 0x600;
epic_output_eepromw( ioaddr, read_cmd );
dataval = epic_input_eepromw( ioaddr );
epic_write_eepromreg( ioaddr + EECTL, 1 );
return dataval;
}
static int epic_read_phy_register(u_int16_t iobase, u_int16_t loc){
int i;
outl( iobase + MIICTL, ((loc << 4) | 0x0601) );
for( i=0;i<0x1000;i++) if( !(inl( iobase + MIICTL )&1) ) break;
return inl( iobase + MIIDATA );
}
static void epic_write_phy_register(u_int16_t iobase, u_int16_t loc,u_int16_t val){
int i;
outl( iobase + MIIDATA, val );
outl( iobase + MIICTL, ((loc << 4) | 0x0602) );
for( i=0;i<0x1000;i++) if( !(inl( iobase + MIICTL )&2) ) break;
return;
}
#endif /* NPCI > 0 */