78a49a45bc
A timecounter will be selected when registered if its quality is not negative and no less than the current timecounters. Add a sysctl to report all available timecounters and their qualities. Give the dummy timecounter a solid negative quality of minus a million. Give the i8254 zero and the ACPI 1000. The TSC gets 800, unless APM or SMP forces it negative. Other timecounters default to zero quality and thereby retain current selection behaviour.
1089 lines
26 KiB
C
1089 lines
26 KiB
C
/*-
|
|
* Copyright (c) 1990 The Regents of the University of California.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to Berkeley by
|
|
* William Jolitz and Don Ahn.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the University of
|
|
* California, Berkeley and its contributors.
|
|
* 4. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* from: @(#)clock.c 7.2 (Berkeley) 5/12/91
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*
|
|
* Routines to handle clock hardware.
|
|
*/
|
|
|
|
/*
|
|
* inittodr, settodr and support routines written
|
|
* by Christoph Robitschko <chmr@edvz.tu-graz.ac.at>
|
|
*
|
|
* reintroduced and updated by Chris Stenton <chris@gnome.co.uk> 8/10/94
|
|
*/
|
|
|
|
#include "opt_clock.h"
|
|
#include "opt_isa.h"
|
|
#include "opt_mca.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/time.h>
|
|
#include <sys/timetc.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/limits.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/cons.h>
|
|
#include <sys/power.h>
|
|
|
|
#include <machine/clock.h>
|
|
#include <machine/cputypes.h>
|
|
#include <machine/frame.h>
|
|
#include <machine/md_var.h>
|
|
#include <machine/psl.h>
|
|
#ifdef APIC_IO
|
|
#include <machine/segments.h>
|
|
#endif
|
|
#if defined(SMP) || defined(APIC_IO)
|
|
#include <machine/smp.h>
|
|
#endif /* SMP || APIC_IO */
|
|
#include <machine/specialreg.h>
|
|
|
|
#include <i386/isa/icu.h>
|
|
#include <i386/isa/isa.h>
|
|
#include <isa/rtc.h>
|
|
#ifdef DEV_ISA
|
|
#include <isa/isavar.h>
|
|
#endif
|
|
#include <i386/isa/timerreg.h>
|
|
|
|
#include <i386/isa/intr_machdep.h>
|
|
|
|
#ifdef DEV_MCA
|
|
#include <i386/bios/mca_machdep.h>
|
|
#endif
|
|
|
|
#ifdef APIC_IO
|
|
#include <i386/isa/intr_machdep.h>
|
|
/* The interrupt triggered by the 8254 (timer) chip */
|
|
int apic_8254_intr;
|
|
static u_long read_intr_count(int vec);
|
|
static void setup_8254_mixed_mode(void);
|
|
#endif
|
|
|
|
/*
|
|
* 32-bit time_t's can't reach leap years before 1904 or after 2036, so we
|
|
* can use a simple formula for leap years.
|
|
*/
|
|
#define LEAPYEAR(y) (((u_int)(y) % 4 == 0) ? 1 : 0)
|
|
#define DAYSPERYEAR (31+28+31+30+31+30+31+31+30+31+30+31)
|
|
|
|
#define TIMER_DIV(x) ((timer_freq + (x) / 2) / (x))
|
|
|
|
|
|
int adjkerntz; /* local offset from GMT in seconds */
|
|
int clkintr_pending;
|
|
int disable_rtc_set; /* disable resettodr() if != 0 */
|
|
int pscnt = 1;
|
|
int psdiv = 1;
|
|
int statclock_disable;
|
|
#ifndef TIMER_FREQ
|
|
#define TIMER_FREQ 1193182
|
|
#endif
|
|
u_int timer_freq = TIMER_FREQ;
|
|
int timer0_max_count;
|
|
int wall_cmos_clock; /* wall CMOS clock assumed if != 0 */
|
|
struct mtx clock_lock;
|
|
|
|
static int beeping = 0;
|
|
static const u_char daysinmonth[] = {31,28,31,30,31,30,31,31,30,31,30,31};
|
|
static u_int hardclock_max_count;
|
|
static u_int32_t i8254_lastcount;
|
|
static u_int32_t i8254_offset;
|
|
static int i8254_ticked;
|
|
|
|
|
|
static u_char rtc_statusa = RTCSA_DIVIDER | RTCSA_NOPROF;
|
|
static u_char rtc_statusb = RTCSB_24HR | RTCSB_PINTR;
|
|
|
|
/* Values for timerX_state: */
|
|
#define RELEASED 0
|
|
#define RELEASE_PENDING 1
|
|
#define ACQUIRED 2
|
|
#define ACQUIRE_PENDING 3
|
|
|
|
static u_char timer2_state;
|
|
static void (*timer_func)(struct clockframe *frame) = hardclock;
|
|
|
|
static unsigned i8254_get_timecount(struct timecounter *tc);
|
|
static void set_timer_freq(u_int freq, int intr_freq);
|
|
|
|
static struct timecounter i8254_timecounter = {
|
|
i8254_get_timecount, /* get_timecount */
|
|
0, /* no poll_pps */
|
|
~0u, /* counter_mask */
|
|
0, /* frequency */
|
|
"i8254", /* name */
|
|
0 /* quality */
|
|
};
|
|
|
|
static void
|
|
clkintr(struct clockframe frame)
|
|
{
|
|
|
|
if (timecounter->tc_get_timecount == i8254_get_timecount) {
|
|
mtx_lock_spin(&clock_lock);
|
|
if (i8254_ticked)
|
|
i8254_ticked = 0;
|
|
else {
|
|
i8254_offset += timer0_max_count;
|
|
i8254_lastcount = 0;
|
|
}
|
|
clkintr_pending = 0;
|
|
mtx_unlock_spin(&clock_lock);
|
|
}
|
|
timer_func(&frame);
|
|
#ifdef SMP
|
|
if (timer_func == hardclock)
|
|
forward_hardclock();
|
|
#endif
|
|
#ifdef DEV_MCA
|
|
/* Reset clock interrupt by asserting bit 7 of port 0x61 */
|
|
if (MCA_system)
|
|
outb(0x61, inb(0x61) | 0x80);
|
|
#endif
|
|
}
|
|
|
|
int
|
|
acquire_timer2(int mode)
|
|
{
|
|
|
|
if (timer2_state != RELEASED)
|
|
return (-1);
|
|
timer2_state = ACQUIRED;
|
|
|
|
/*
|
|
* This access to the timer registers is as atomic as possible
|
|
* because it is a single instruction. We could do better if we
|
|
* knew the rate. Use of splclock() limits glitches to 10-100us,
|
|
* and this is probably good enough for timer2, so we aren't as
|
|
* careful with it as with timer0.
|
|
*/
|
|
outb(TIMER_MODE, TIMER_SEL2 | (mode & 0x3f));
|
|
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
release_timer2()
|
|
{
|
|
|
|
if (timer2_state != ACQUIRED)
|
|
return (-1);
|
|
timer2_state = RELEASED;
|
|
outb(TIMER_MODE, TIMER_SEL2 | TIMER_SQWAVE | TIMER_16BIT);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* This routine receives statistical clock interrupts from the RTC.
|
|
* As explained above, these occur at 128 interrupts per second.
|
|
* When profiling, we receive interrupts at a rate of 1024 Hz.
|
|
*
|
|
* This does not actually add as much overhead as it sounds, because
|
|
* when the statistical clock is active, the hardclock driver no longer
|
|
* needs to keep (inaccurate) statistics on its own. This decouples
|
|
* statistics gathering from scheduling interrupts.
|
|
*
|
|
* The RTC chip requires that we read status register C (RTC_INTR)
|
|
* to acknowledge an interrupt, before it will generate the next one.
|
|
* Under high interrupt load, rtcintr() can be indefinitely delayed and
|
|
* the clock can tick immediately after the read from RTC_INTR. In this
|
|
* case, the mc146818A interrupt signal will not drop for long enough
|
|
* to register with the 8259 PIC. If an interrupt is missed, the stat
|
|
* clock will halt, considerably degrading system performance. This is
|
|
* why we use 'while' rather than a more straightforward 'if' below.
|
|
* Stat clock ticks can still be lost, causing minor loss of accuracy
|
|
* in the statistics, but the stat clock will no longer stop.
|
|
*/
|
|
static void
|
|
rtcintr(struct clockframe frame)
|
|
{
|
|
while (rtcin(RTC_INTR) & RTCIR_PERIOD) {
|
|
if (profprocs != 0) {
|
|
if (--pscnt == 0)
|
|
pscnt = psdiv;
|
|
profclock(&frame);
|
|
}
|
|
if (pscnt == psdiv)
|
|
statclock(&frame);
|
|
#ifdef SMP
|
|
forward_statclock();
|
|
#endif
|
|
}
|
|
}
|
|
|
|
#include "opt_ddb.h"
|
|
#ifdef DDB
|
|
#include <ddb/ddb.h>
|
|
|
|
DB_SHOW_COMMAND(rtc, rtc)
|
|
{
|
|
printf("%02x/%02x/%02x %02x:%02x:%02x, A = %02x, B = %02x, C = %02x\n",
|
|
rtcin(RTC_YEAR), rtcin(RTC_MONTH), rtcin(RTC_DAY),
|
|
rtcin(RTC_HRS), rtcin(RTC_MIN), rtcin(RTC_SEC),
|
|
rtcin(RTC_STATUSA), rtcin(RTC_STATUSB), rtcin(RTC_INTR));
|
|
}
|
|
#endif /* DDB */
|
|
|
|
static int
|
|
getit(void)
|
|
{
|
|
int high, low;
|
|
|
|
mtx_lock_spin(&clock_lock);
|
|
|
|
/* Select timer0 and latch counter value. */
|
|
outb(TIMER_MODE, TIMER_SEL0 | TIMER_LATCH);
|
|
|
|
low = inb(TIMER_CNTR0);
|
|
high = inb(TIMER_CNTR0);
|
|
|
|
mtx_unlock_spin(&clock_lock);
|
|
return ((high << 8) | low);
|
|
}
|
|
|
|
/*
|
|
* Wait "n" microseconds.
|
|
* Relies on timer 1 counting down from (timer_freq / hz)
|
|
* Note: timer had better have been programmed before this is first used!
|
|
*/
|
|
void
|
|
DELAY(int n)
|
|
{
|
|
int delta, prev_tick, tick, ticks_left;
|
|
|
|
#ifdef DELAYDEBUG
|
|
int getit_calls = 1;
|
|
int n1;
|
|
static int state = 0;
|
|
|
|
if (state == 0) {
|
|
state = 1;
|
|
for (n1 = 1; n1 <= 10000000; n1 *= 10)
|
|
DELAY(n1);
|
|
state = 2;
|
|
}
|
|
if (state == 1)
|
|
printf("DELAY(%d)...", n);
|
|
#endif
|
|
/*
|
|
* Guard against the timer being uninitialized if we are called
|
|
* early for console i/o.
|
|
*/
|
|
if (timer0_max_count == 0)
|
|
set_timer_freq(timer_freq, hz);
|
|
|
|
/*
|
|
* Read the counter first, so that the rest of the setup overhead is
|
|
* counted. Guess the initial overhead is 20 usec (on most systems it
|
|
* takes about 1.5 usec for each of the i/o's in getit(). The loop
|
|
* takes about 6 usec on a 486/33 and 13 usec on a 386/20. The
|
|
* multiplications and divisions to scale the count take a while).
|
|
*/
|
|
prev_tick = getit();
|
|
n -= 0; /* XXX actually guess no initial overhead */
|
|
/*
|
|
* Calculate (n * (timer_freq / 1e6)) without using floating point
|
|
* and without any avoidable overflows.
|
|
*/
|
|
if (n <= 0)
|
|
ticks_left = 0;
|
|
else if (n < 256)
|
|
/*
|
|
* Use fixed point to avoid a slow division by 1000000.
|
|
* 39099 = 1193182 * 2^15 / 10^6 rounded to nearest.
|
|
* 2^15 is the first power of 2 that gives exact results
|
|
* for n between 0 and 256.
|
|
*/
|
|
ticks_left = ((u_int)n * 39099 + (1 << 15) - 1) >> 15;
|
|
else
|
|
/*
|
|
* Don't bother using fixed point, although gcc-2.7.2
|
|
* generates particularly poor code for the long long
|
|
* division, since even the slow way will complete long
|
|
* before the delay is up (unless we're interrupted).
|
|
*/
|
|
ticks_left = ((u_int)n * (long long)timer_freq + 999999)
|
|
/ 1000000;
|
|
|
|
while (ticks_left > 0) {
|
|
tick = getit();
|
|
#ifdef DELAYDEBUG
|
|
++getit_calls;
|
|
#endif
|
|
delta = prev_tick - tick;
|
|
prev_tick = tick;
|
|
if (delta < 0) {
|
|
delta += timer0_max_count;
|
|
/*
|
|
* Guard against timer0_max_count being wrong.
|
|
* This shouldn't happen in normal operation,
|
|
* but it may happen if set_timer_freq() is
|
|
* traced.
|
|
*/
|
|
if (delta < 0)
|
|
delta = 0;
|
|
}
|
|
ticks_left -= delta;
|
|
}
|
|
#ifdef DELAYDEBUG
|
|
if (state == 1)
|
|
printf(" %d calls to getit() at %d usec each\n",
|
|
getit_calls, (n + 5) / getit_calls);
|
|
#endif
|
|
}
|
|
|
|
static void
|
|
sysbeepstop(void *chan)
|
|
{
|
|
outb(IO_PPI, inb(IO_PPI)&0xFC); /* disable counter2 output to speaker */
|
|
release_timer2();
|
|
beeping = 0;
|
|
}
|
|
|
|
int
|
|
sysbeep(int pitch, int period)
|
|
{
|
|
int x = splclock();
|
|
|
|
if (acquire_timer2(TIMER_SQWAVE|TIMER_16BIT))
|
|
if (!beeping) {
|
|
/* Something else owns it. */
|
|
splx(x);
|
|
return (-1); /* XXX Should be EBUSY, but nobody cares anyway. */
|
|
}
|
|
mtx_lock_spin(&clock_lock);
|
|
outb(TIMER_CNTR2, pitch);
|
|
outb(TIMER_CNTR2, (pitch>>8));
|
|
mtx_unlock_spin(&clock_lock);
|
|
if (!beeping) {
|
|
/* enable counter2 output to speaker */
|
|
outb(IO_PPI, inb(IO_PPI) | 3);
|
|
beeping = period;
|
|
timeout(sysbeepstop, (void *)NULL, period);
|
|
}
|
|
splx(x);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* RTC support routines
|
|
*/
|
|
|
|
int
|
|
rtcin(reg)
|
|
int reg;
|
|
{
|
|
int s;
|
|
u_char val;
|
|
|
|
s = splhigh();
|
|
outb(IO_RTC, reg);
|
|
inb(0x84);
|
|
val = inb(IO_RTC + 1);
|
|
inb(0x84);
|
|
splx(s);
|
|
return (val);
|
|
}
|
|
|
|
static __inline void
|
|
writertc(u_char reg, u_char val)
|
|
{
|
|
int s;
|
|
|
|
s = splhigh();
|
|
inb(0x84);
|
|
outb(IO_RTC, reg);
|
|
inb(0x84);
|
|
outb(IO_RTC + 1, val);
|
|
inb(0x84); /* XXX work around wrong order in rtcin() */
|
|
splx(s);
|
|
}
|
|
|
|
static __inline int
|
|
readrtc(int port)
|
|
{
|
|
return(bcd2bin(rtcin(port)));
|
|
}
|
|
|
|
static u_int
|
|
calibrate_clocks(void)
|
|
{
|
|
u_int count, prev_count, tot_count;
|
|
int sec, start_sec, timeout;
|
|
|
|
if (bootverbose)
|
|
printf("Calibrating clock(s) ... ");
|
|
if (!(rtcin(RTC_STATUSD) & RTCSD_PWR))
|
|
goto fail;
|
|
timeout = 100000000;
|
|
|
|
/* Read the mc146818A seconds counter. */
|
|
for (;;) {
|
|
if (!(rtcin(RTC_STATUSA) & RTCSA_TUP)) {
|
|
sec = rtcin(RTC_SEC);
|
|
break;
|
|
}
|
|
if (--timeout == 0)
|
|
goto fail;
|
|
}
|
|
|
|
/* Wait for the mC146818A seconds counter to change. */
|
|
start_sec = sec;
|
|
for (;;) {
|
|
if (!(rtcin(RTC_STATUSA) & RTCSA_TUP)) {
|
|
sec = rtcin(RTC_SEC);
|
|
if (sec != start_sec)
|
|
break;
|
|
}
|
|
if (--timeout == 0)
|
|
goto fail;
|
|
}
|
|
|
|
/* Start keeping track of the i8254 counter. */
|
|
prev_count = getit();
|
|
if (prev_count == 0 || prev_count > timer0_max_count)
|
|
goto fail;
|
|
tot_count = 0;
|
|
|
|
/*
|
|
* Wait for the mc146818A seconds counter to change. Read the i8254
|
|
* counter for each iteration since this is convenient and only
|
|
* costs a few usec of inaccuracy. The timing of the final reads
|
|
* of the counters almost matches the timing of the initial reads,
|
|
* so the main cause of inaccuracy is the varying latency from
|
|
* inside getit() or rtcin(RTC_STATUSA) to the beginning of the
|
|
* rtcin(RTC_SEC) that returns a changed seconds count. The
|
|
* maximum inaccuracy from this cause is < 10 usec on 486's.
|
|
*/
|
|
start_sec = sec;
|
|
for (;;) {
|
|
if (!(rtcin(RTC_STATUSA) & RTCSA_TUP))
|
|
sec = rtcin(RTC_SEC);
|
|
count = getit();
|
|
if (count == 0 || count > timer0_max_count)
|
|
goto fail;
|
|
if (count > prev_count)
|
|
tot_count += prev_count - (count - timer0_max_count);
|
|
else
|
|
tot_count += prev_count - count;
|
|
prev_count = count;
|
|
if (sec != start_sec)
|
|
break;
|
|
if (--timeout == 0)
|
|
goto fail;
|
|
}
|
|
|
|
if (bootverbose) {
|
|
printf("i8254 clock: %u Hz\n", tot_count);
|
|
}
|
|
return (tot_count);
|
|
|
|
fail:
|
|
if (bootverbose)
|
|
printf("failed, using default i8254 clock of %u Hz\n",
|
|
timer_freq);
|
|
return (timer_freq);
|
|
}
|
|
|
|
static void
|
|
set_timer_freq(u_int freq, int intr_freq)
|
|
{
|
|
int new_timer0_max_count;
|
|
|
|
mtx_lock_spin(&clock_lock);
|
|
timer_freq = freq;
|
|
new_timer0_max_count = hardclock_max_count = TIMER_DIV(intr_freq);
|
|
if (new_timer0_max_count != timer0_max_count) {
|
|
timer0_max_count = new_timer0_max_count;
|
|
outb(TIMER_MODE, TIMER_SEL0 | TIMER_RATEGEN | TIMER_16BIT);
|
|
outb(TIMER_CNTR0, timer0_max_count & 0xff);
|
|
outb(TIMER_CNTR0, timer0_max_count >> 8);
|
|
}
|
|
mtx_unlock_spin(&clock_lock);
|
|
}
|
|
|
|
static void
|
|
i8254_restore(void)
|
|
{
|
|
|
|
mtx_lock_spin(&clock_lock);
|
|
outb(TIMER_MODE, TIMER_SEL0 | TIMER_RATEGEN | TIMER_16BIT);
|
|
outb(TIMER_CNTR0, timer0_max_count & 0xff);
|
|
outb(TIMER_CNTR0, timer0_max_count >> 8);
|
|
mtx_unlock_spin(&clock_lock);
|
|
}
|
|
|
|
static void
|
|
rtc_restore(void)
|
|
{
|
|
|
|
/* Restore all of the RTC's "status" (actually, control) registers. */
|
|
/* XXX locking is needed for RTC access. */
|
|
writertc(RTC_STATUSB, RTCSB_24HR);
|
|
writertc(RTC_STATUSA, rtc_statusa);
|
|
writertc(RTC_STATUSB, rtc_statusb);
|
|
}
|
|
|
|
/*
|
|
* Restore all the timers non-atomically (XXX: should be atomically).
|
|
*
|
|
* This function is called from pmtimer_resume() to restore all the timers.
|
|
* This should not be necessary, but there are broken laptops that do not
|
|
* restore all the timers on resume.
|
|
*/
|
|
void
|
|
timer_restore(void)
|
|
{
|
|
|
|
i8254_restore(); /* restore timer_freq and hz */
|
|
rtc_restore(); /* reenable RTC interrupts */
|
|
}
|
|
|
|
/*
|
|
* Initialize 8254 timer 0 early so that it can be used in DELAY().
|
|
* XXX initialization of other timers is unintentionally left blank.
|
|
*/
|
|
void
|
|
startrtclock()
|
|
{
|
|
u_int delta, freq;
|
|
|
|
writertc(RTC_STATUSA, rtc_statusa);
|
|
writertc(RTC_STATUSB, RTCSB_24HR);
|
|
|
|
set_timer_freq(timer_freq, hz);
|
|
freq = calibrate_clocks();
|
|
#ifdef CLK_CALIBRATION_LOOP
|
|
if (bootverbose) {
|
|
printf(
|
|
"Press a key on the console to abort clock calibration\n");
|
|
while (cncheckc() == -1)
|
|
calibrate_clocks();
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Use the calibrated i8254 frequency if it seems reasonable.
|
|
* Otherwise use the default, and don't use the calibrated i586
|
|
* frequency.
|
|
*/
|
|
delta = freq > timer_freq ? freq - timer_freq : timer_freq - freq;
|
|
if (delta < timer_freq / 100) {
|
|
#ifndef CLK_USE_I8254_CALIBRATION
|
|
if (bootverbose)
|
|
printf(
|
|
"CLK_USE_I8254_CALIBRATION not specified - using default frequency\n");
|
|
freq = timer_freq;
|
|
#endif
|
|
timer_freq = freq;
|
|
} else {
|
|
if (bootverbose)
|
|
printf(
|
|
"%d Hz differs from default of %d Hz by more than 1%%\n",
|
|
freq, timer_freq);
|
|
}
|
|
|
|
set_timer_freq(timer_freq, hz);
|
|
i8254_timecounter.tc_frequency = timer_freq;
|
|
tc_init(&i8254_timecounter);
|
|
|
|
init_TSC();
|
|
}
|
|
|
|
/*
|
|
* Initialize the time of day register, based on the time base which is, e.g.
|
|
* from a filesystem.
|
|
*/
|
|
void
|
|
inittodr(time_t base)
|
|
{
|
|
unsigned long sec, days;
|
|
int year, month;
|
|
int y, m, s;
|
|
struct timespec ts;
|
|
|
|
if (base) {
|
|
s = splclock();
|
|
ts.tv_sec = base;
|
|
ts.tv_nsec = 0;
|
|
tc_setclock(&ts);
|
|
splx(s);
|
|
}
|
|
|
|
/* Look if we have a RTC present and the time is valid */
|
|
if (!(rtcin(RTC_STATUSD) & RTCSD_PWR))
|
|
goto wrong_time;
|
|
|
|
/* wait for time update to complete */
|
|
/* If RTCSA_TUP is zero, we have at least 244us before next update */
|
|
s = splhigh();
|
|
while (rtcin(RTC_STATUSA) & RTCSA_TUP) {
|
|
splx(s);
|
|
s = splhigh();
|
|
}
|
|
|
|
days = 0;
|
|
#ifdef USE_RTC_CENTURY
|
|
year = readrtc(RTC_YEAR) + readrtc(RTC_CENTURY) * 100;
|
|
#else
|
|
year = readrtc(RTC_YEAR) + 1900;
|
|
if (year < 1970)
|
|
year += 100;
|
|
#endif
|
|
if (year < 1970) {
|
|
splx(s);
|
|
goto wrong_time;
|
|
}
|
|
month = readrtc(RTC_MONTH);
|
|
for (m = 1; m < month; m++)
|
|
days += daysinmonth[m-1];
|
|
if ((month > 2) && LEAPYEAR(year))
|
|
days ++;
|
|
days += readrtc(RTC_DAY) - 1;
|
|
for (y = 1970; y < year; y++)
|
|
days += DAYSPERYEAR + LEAPYEAR(y);
|
|
sec = ((( days * 24 +
|
|
readrtc(RTC_HRS)) * 60 +
|
|
readrtc(RTC_MIN)) * 60 +
|
|
readrtc(RTC_SEC));
|
|
/* sec now contains the number of seconds, since Jan 1 1970,
|
|
in the local time zone */
|
|
|
|
sec += tz_minuteswest * 60 + (wall_cmos_clock ? adjkerntz : 0);
|
|
|
|
y = time_second - sec;
|
|
if (y <= -2 || y >= 2) {
|
|
/* badly off, adjust it */
|
|
ts.tv_sec = sec;
|
|
ts.tv_nsec = 0;
|
|
tc_setclock(&ts);
|
|
}
|
|
splx(s);
|
|
return;
|
|
|
|
wrong_time:
|
|
printf("Invalid time in real time clock.\n");
|
|
printf("Check and reset the date immediately!\n");
|
|
}
|
|
|
|
/*
|
|
* Write system time back to RTC
|
|
*/
|
|
void
|
|
resettodr()
|
|
{
|
|
unsigned long tm;
|
|
int y, m, s;
|
|
|
|
if (disable_rtc_set)
|
|
return;
|
|
|
|
s = splclock();
|
|
tm = time_second;
|
|
splx(s);
|
|
|
|
/* Disable RTC updates and interrupts. */
|
|
writertc(RTC_STATUSB, RTCSB_HALT | RTCSB_24HR);
|
|
|
|
/* Calculate local time to put in RTC */
|
|
|
|
tm -= tz_minuteswest * 60 + (wall_cmos_clock ? adjkerntz : 0);
|
|
|
|
writertc(RTC_SEC, bin2bcd(tm%60)); tm /= 60; /* Write back Seconds */
|
|
writertc(RTC_MIN, bin2bcd(tm%60)); tm /= 60; /* Write back Minutes */
|
|
writertc(RTC_HRS, bin2bcd(tm%24)); tm /= 24; /* Write back Hours */
|
|
|
|
/* We have now the days since 01-01-1970 in tm */
|
|
writertc(RTC_WDAY, (tm + 4) % 7 + 1); /* Write back Weekday */
|
|
for (y = 1970, m = DAYSPERYEAR + LEAPYEAR(y);
|
|
tm >= m;
|
|
y++, m = DAYSPERYEAR + LEAPYEAR(y))
|
|
tm -= m;
|
|
|
|
/* Now we have the years in y and the day-of-the-year in tm */
|
|
writertc(RTC_YEAR, bin2bcd(y%100)); /* Write back Year */
|
|
#ifdef USE_RTC_CENTURY
|
|
writertc(RTC_CENTURY, bin2bcd(y/100)); /* ... and Century */
|
|
#endif
|
|
for (m = 0; ; m++) {
|
|
int ml;
|
|
|
|
ml = daysinmonth[m];
|
|
if (m == 1 && LEAPYEAR(y))
|
|
ml++;
|
|
if (tm < ml)
|
|
break;
|
|
tm -= ml;
|
|
}
|
|
|
|
writertc(RTC_MONTH, bin2bcd(m + 1)); /* Write back Month */
|
|
writertc(RTC_DAY, bin2bcd(tm + 1)); /* Write back Month Day */
|
|
|
|
/* Reenable RTC updates and interrupts. */
|
|
writertc(RTC_STATUSB, rtc_statusb);
|
|
}
|
|
|
|
|
|
/*
|
|
* Start both clocks running.
|
|
*/
|
|
void
|
|
cpu_initclocks()
|
|
{
|
|
int diag;
|
|
#ifdef APIC_IO
|
|
int apic_8254_trial;
|
|
void *clkdesc;
|
|
#endif /* APIC_IO */
|
|
register_t crit;
|
|
|
|
if (statclock_disable) {
|
|
/*
|
|
* The stat interrupt mask is different without the
|
|
* statistics clock. Also, don't set the interrupt
|
|
* flag which would normally cause the RTC to generate
|
|
* interrupts.
|
|
*/
|
|
rtc_statusb = RTCSB_24HR;
|
|
} else {
|
|
/* Setting stathz to nonzero early helps avoid races. */
|
|
stathz = RTC_NOPROFRATE;
|
|
profhz = RTC_PROFRATE;
|
|
}
|
|
|
|
/* Finish initializing 8253 timer 0. */
|
|
#ifdef APIC_IO
|
|
|
|
apic_8254_intr = isa_apic_irq(0);
|
|
apic_8254_trial = 0;
|
|
if (apic_8254_intr >= 0 ) {
|
|
if (apic_int_type(0, 0) == 3)
|
|
apic_8254_trial = 1;
|
|
} else {
|
|
/* look for ExtInt on pin 0 */
|
|
if (apic_int_type(0, 0) == 3) {
|
|
apic_8254_intr = apic_irq(0, 0);
|
|
setup_8254_mixed_mode();
|
|
} else
|
|
panic("APIC_IO: Cannot route 8254 interrupt to CPU");
|
|
}
|
|
|
|
inthand_add("clk", apic_8254_intr, (driver_intr_t *)clkintr, NULL,
|
|
INTR_TYPE_CLK | INTR_FAST, &clkdesc);
|
|
crit = intr_disable();
|
|
mtx_lock_spin(&icu_lock);
|
|
INTREN(1 << apic_8254_intr);
|
|
mtx_unlock_spin(&icu_lock);
|
|
intr_restore(crit);
|
|
|
|
#else /* APIC_IO */
|
|
|
|
/*
|
|
* XXX Check the priority of this interrupt handler. I
|
|
* couldn't find anything suitable in the BSD/OS code (grog,
|
|
* 19 July 2000).
|
|
*/
|
|
inthand_add("clk", 0, (driver_intr_t *)clkintr, NULL,
|
|
INTR_TYPE_CLK | INTR_FAST, NULL);
|
|
crit = intr_disable();
|
|
mtx_lock_spin(&icu_lock);
|
|
INTREN(IRQ0);
|
|
mtx_unlock_spin(&icu_lock);
|
|
intr_restore(crit);
|
|
|
|
#endif /* APIC_IO */
|
|
|
|
/* Initialize RTC. */
|
|
writertc(RTC_STATUSA, rtc_statusa);
|
|
writertc(RTC_STATUSB, RTCSB_24HR);
|
|
|
|
/* Don't bother enabling the statistics clock. */
|
|
if (statclock_disable)
|
|
return;
|
|
diag = rtcin(RTC_DIAG);
|
|
if (diag != 0)
|
|
printf("RTC BIOS diagnostic error %b\n", diag, RTCDG_BITS);
|
|
|
|
#ifdef APIC_IO
|
|
if (isa_apic_irq(8) != 8)
|
|
panic("APIC RTC != 8");
|
|
#endif /* APIC_IO */
|
|
|
|
inthand_add("rtc", 8, (driver_intr_t *)rtcintr, NULL,
|
|
INTR_TYPE_CLK | INTR_FAST, NULL);
|
|
|
|
crit = intr_disable();
|
|
mtx_lock_spin(&icu_lock);
|
|
#ifdef APIC_IO
|
|
INTREN(APIC_IRQ8);
|
|
#else
|
|
INTREN(IRQ8);
|
|
#endif /* APIC_IO */
|
|
mtx_unlock_spin(&icu_lock);
|
|
intr_restore(crit);
|
|
|
|
writertc(RTC_STATUSB, rtc_statusb);
|
|
|
|
#ifdef APIC_IO
|
|
if (apic_8254_trial) {
|
|
|
|
printf("APIC_IO: Testing 8254 interrupt delivery\n");
|
|
while (read_intr_count(8) < 6)
|
|
; /* nothing */
|
|
if (read_intr_count(apic_8254_intr) < 3) {
|
|
/*
|
|
* The MP table is broken.
|
|
* The 8254 was not connected to the specified pin
|
|
* on the IO APIC.
|
|
* Workaround: Limited variant of mixed mode.
|
|
*/
|
|
|
|
crit = intr_disable();
|
|
mtx_lock_spin(&icu_lock);
|
|
INTRDIS(1 << apic_8254_intr);
|
|
mtx_unlock_spin(&icu_lock);
|
|
intr_restore(crit);
|
|
inthand_remove(clkdesc);
|
|
printf("APIC_IO: Broken MP table detected: "
|
|
"8254 is not connected to "
|
|
"IOAPIC #%d intpin %d\n",
|
|
int_to_apicintpin[apic_8254_intr].ioapic,
|
|
int_to_apicintpin[apic_8254_intr].int_pin);
|
|
/*
|
|
* Revoke current ISA IRQ 0 assignment and
|
|
* configure a fallback interrupt routing from
|
|
* the 8254 Timer via the 8259 PIC to the
|
|
* an ExtInt interrupt line on IOAPIC #0 intpin 0.
|
|
* We reuse the low level interrupt handler number.
|
|
*/
|
|
if (apic_irq(0, 0) < 0) {
|
|
revoke_apic_irq(apic_8254_intr);
|
|
assign_apic_irq(0, 0, apic_8254_intr);
|
|
}
|
|
apic_8254_intr = apic_irq(0, 0);
|
|
setup_8254_mixed_mode();
|
|
inthand_add("clk", apic_8254_intr,
|
|
(driver_intr_t *)clkintr, NULL,
|
|
INTR_TYPE_CLK | INTR_FAST, NULL);
|
|
crit = intr_disable();
|
|
mtx_lock_spin(&icu_lock);
|
|
INTREN(1 << apic_8254_intr);
|
|
mtx_unlock_spin(&icu_lock);
|
|
intr_restore(crit);
|
|
}
|
|
|
|
}
|
|
if (apic_int_type(0, 0) != 3 ||
|
|
int_to_apicintpin[apic_8254_intr].ioapic != 0 ||
|
|
int_to_apicintpin[apic_8254_intr].int_pin != 0)
|
|
printf("APIC_IO: routing 8254 via IOAPIC #%d intpin %d\n",
|
|
int_to_apicintpin[apic_8254_intr].ioapic,
|
|
int_to_apicintpin[apic_8254_intr].int_pin);
|
|
else
|
|
printf("APIC_IO: "
|
|
"routing 8254 via 8259 and IOAPIC #0 intpin 0\n");
|
|
#endif
|
|
|
|
init_TSC_tc();
|
|
}
|
|
|
|
#ifdef APIC_IO
|
|
static u_long
|
|
read_intr_count(int vec)
|
|
{
|
|
u_long *up;
|
|
up = intr_countp[vec];
|
|
if (up)
|
|
return *up;
|
|
return 0UL;
|
|
}
|
|
|
|
static void
|
|
setup_8254_mixed_mode()
|
|
{
|
|
/*
|
|
* Allow 8254 timer to INTerrupt 8259:
|
|
* re-initialize master 8259:
|
|
* reset; prog 4 bytes, single ICU, edge triggered
|
|
*/
|
|
outb(IO_ICU1, 0x13);
|
|
outb(IO_ICU1 + 1, NRSVIDT); /* start vector (unused) */
|
|
outb(IO_ICU1 + 1, 0x00); /* ignore slave */
|
|
outb(IO_ICU1 + 1, 0x03); /* auto EOI, 8086 */
|
|
outb(IO_ICU1 + 1, 0xfe); /* unmask INT0 */
|
|
|
|
/* program IO APIC for type 3 INT on INT0 */
|
|
if (ext_int_setup(0, 0) < 0)
|
|
panic("8254 redirect via APIC pin0 impossible!");
|
|
}
|
|
#endif
|
|
|
|
void
|
|
cpu_startprofclock(void)
|
|
{
|
|
|
|
rtc_statusa = RTCSA_DIVIDER | RTCSA_PROF;
|
|
writertc(RTC_STATUSA, rtc_statusa);
|
|
psdiv = pscnt = psratio;
|
|
}
|
|
|
|
void
|
|
cpu_stopprofclock(void)
|
|
{
|
|
|
|
rtc_statusa = RTCSA_DIVIDER | RTCSA_NOPROF;
|
|
writertc(RTC_STATUSA, rtc_statusa);
|
|
psdiv = pscnt = 1;
|
|
}
|
|
|
|
static int
|
|
sysctl_machdep_i8254_freq(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
u_int freq;
|
|
|
|
/*
|
|
* Use `i8254' instead of `timer' in external names because `timer'
|
|
* is is too generic. Should use it everywhere.
|
|
*/
|
|
freq = timer_freq;
|
|
error = sysctl_handle_int(oidp, &freq, sizeof(freq), req);
|
|
if (error == 0 && req->newptr != NULL) {
|
|
set_timer_freq(freq, hz);
|
|
i8254_timecounter.tc_frequency = freq;
|
|
}
|
|
return (error);
|
|
}
|
|
|
|
SYSCTL_PROC(_machdep, OID_AUTO, i8254_freq, CTLTYPE_INT | CTLFLAG_RW,
|
|
0, sizeof(u_int), sysctl_machdep_i8254_freq, "IU", "");
|
|
|
|
static unsigned
|
|
i8254_get_timecount(struct timecounter *tc)
|
|
{
|
|
u_int count;
|
|
u_int high, low;
|
|
u_int eflags;
|
|
|
|
eflags = read_eflags();
|
|
mtx_lock_spin(&clock_lock);
|
|
|
|
/* Select timer0 and latch counter value. */
|
|
outb(TIMER_MODE, TIMER_SEL0 | TIMER_LATCH);
|
|
|
|
low = inb(TIMER_CNTR0);
|
|
high = inb(TIMER_CNTR0);
|
|
count = timer0_max_count - ((high << 8) | low);
|
|
if (count < i8254_lastcount ||
|
|
(!i8254_ticked && (clkintr_pending ||
|
|
((count < 20 || (!(eflags & PSL_I) && count < timer0_max_count / 2u)) &&
|
|
#ifdef APIC_IO
|
|
#define lapic_irr1 ((volatile u_int *)&lapic)[0x210 / 4] /* XXX XXX */
|
|
/* XXX this assumes that apic_8254_intr is < 24. */
|
|
(lapic_irr1 & (1 << apic_8254_intr))))
|
|
#else
|
|
(inb(IO_ICU1) & 1)))
|
|
#endif
|
|
)) {
|
|
i8254_ticked = 1;
|
|
i8254_offset += timer0_max_count;
|
|
}
|
|
i8254_lastcount = count;
|
|
count += i8254_offset;
|
|
mtx_unlock_spin(&clock_lock);
|
|
return (count);
|
|
}
|
|
|
|
#ifdef DEV_ISA
|
|
/*
|
|
* Attach to the ISA PnP descriptors for the timer and realtime clock.
|
|
*/
|
|
static struct isa_pnp_id attimer_ids[] = {
|
|
{ 0x0001d041 /* PNP0100 */, "AT timer" },
|
|
{ 0x000bd041 /* PNP0B00 */, "AT realtime clock" },
|
|
{ 0 }
|
|
};
|
|
|
|
static int
|
|
attimer_probe(device_t dev)
|
|
{
|
|
int result;
|
|
|
|
if ((result = ISA_PNP_PROBE(device_get_parent(dev), dev, attimer_ids)) <= 0)
|
|
device_quiet(dev);
|
|
return(result);
|
|
}
|
|
|
|
static int
|
|
attimer_attach(device_t dev)
|
|
{
|
|
return(0);
|
|
}
|
|
|
|
static device_method_t attimer_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, attimer_probe),
|
|
DEVMETHOD(device_attach, attimer_attach),
|
|
DEVMETHOD(device_detach, bus_generic_detach),
|
|
DEVMETHOD(device_shutdown, bus_generic_shutdown),
|
|
DEVMETHOD(device_suspend, bus_generic_suspend), /* XXX stop statclock? */
|
|
DEVMETHOD(device_resume, bus_generic_resume), /* XXX restart statclock? */
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t attimer_driver = {
|
|
"attimer",
|
|
attimer_methods,
|
|
1, /* no softc */
|
|
};
|
|
|
|
static devclass_t attimer_devclass;
|
|
|
|
DRIVER_MODULE(attimer, isa, attimer_driver, attimer_devclass, 0, 0);
|
|
DRIVER_MODULE(attimer, acpi, attimer_driver, attimer_devclass, 0, 0);
|
|
#endif /* DEV_ISA */
|