e03f8cdc4f
been developed for use with FreeBSD, version 4.8 and later. Submitted by: Hema Joyce Reviewed by: Prafulla Deuskar Approved by: Prafulla Deuskar MFC after: 1 week
782 lines
24 KiB
C
782 lines
24 KiB
C
/*******************************************************************************
|
|
|
|
Copyright (c) 2001-2004, Intel Corporation
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice,
|
|
this list of conditions and the following disclaimer.
|
|
|
|
2. Redistributions in binary form must reproduce the above copyright
|
|
notice, this list of conditions and the following disclaimer in the
|
|
documentation and/or other materials provided with the distribution.
|
|
|
|
3. Neither the name of the Intel Corporation nor the names of its
|
|
contributors may be used to endorse or promote products derived from
|
|
this software without specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
*******************************************************************************/
|
|
|
|
/*$FreeBSD$*/
|
|
|
|
#include <dev/ixgb/ixgb_hw.h>
|
|
#include <dev/ixgb/ixgb_ee.h>
|
|
|
|
/* Local prototypes */
|
|
static uint16_t ixgb_shift_in_bits(struct ixgb_hw *hw);
|
|
|
|
static void ixgb_shift_out_bits(struct ixgb_hw *hw,
|
|
uint16_t data,
|
|
uint16_t count);
|
|
static void ixgb_standby_eeprom(struct ixgb_hw *hw);
|
|
|
|
static boolean_t ixgb_wait_eeprom_command(struct ixgb_hw *hw);
|
|
|
|
static void ixgb_cleanup_eeprom(struct ixgb_hw *hw);
|
|
|
|
/******************************************************************************
|
|
* Raises the EEPROM's clock input.
|
|
*
|
|
* hw - Struct containing variables accessed by shared code
|
|
* eecd_reg - EECD's current value
|
|
*****************************************************************************/
|
|
static void
|
|
ixgb_raise_clock(struct ixgb_hw *hw,
|
|
uint32_t *eecd_reg)
|
|
{
|
|
/* Raise the clock input to the EEPROM (by setting the SK bit), and then
|
|
* wait 50 microseconds.
|
|
*/
|
|
*eecd_reg = *eecd_reg | IXGB_EECD_SK;
|
|
IXGB_WRITE_REG(hw, EECD, *eecd_reg);
|
|
usec_delay(50);
|
|
return;
|
|
}
|
|
|
|
/******************************************************************************
|
|
* Lowers the EEPROM's clock input.
|
|
*
|
|
* hw - Struct containing variables accessed by shared code
|
|
* eecd_reg - EECD's current value
|
|
*****************************************************************************/
|
|
static void
|
|
ixgb_lower_clock(struct ixgb_hw *hw,
|
|
uint32_t *eecd_reg)
|
|
{
|
|
/* Lower the clock input to the EEPROM (by clearing the SK bit), and then
|
|
* wait 50 microseconds.
|
|
*/
|
|
*eecd_reg = *eecd_reg & ~IXGB_EECD_SK;
|
|
IXGB_WRITE_REG(hw, EECD, *eecd_reg);
|
|
usec_delay(50);
|
|
return;
|
|
}
|
|
|
|
/******************************************************************************
|
|
* Shift data bits out to the EEPROM.
|
|
*
|
|
* hw - Struct containing variables accessed by shared code
|
|
* data - data to send to the EEPROM
|
|
* count - number of bits to shift out
|
|
*****************************************************************************/
|
|
static void
|
|
ixgb_shift_out_bits(struct ixgb_hw *hw,
|
|
uint16_t data,
|
|
uint16_t count)
|
|
{
|
|
uint32_t eecd_reg;
|
|
uint32_t mask;
|
|
|
|
/* We need to shift "count" bits out to the EEPROM. So, value in the
|
|
* "data" parameter will be shifted out to the EEPROM one bit at a time.
|
|
* In order to do this, "data" must be broken down into bits.
|
|
*/
|
|
mask = 0x01 << (count - 1);
|
|
eecd_reg = IXGB_READ_REG(hw, EECD);
|
|
eecd_reg &= ~(IXGB_EECD_DO | IXGB_EECD_DI);
|
|
do {
|
|
/* A "1" is shifted out to the EEPROM by setting bit "DI" to a "1",
|
|
* and then raising and then lowering the clock (the SK bit controls
|
|
* the clock input to the EEPROM). A "0" is shifted out to the EEPROM
|
|
* by setting "DI" to "0" and then raising and then lowering the clock.
|
|
*/
|
|
eecd_reg &= ~IXGB_EECD_DI;
|
|
|
|
if(data & mask)
|
|
eecd_reg |= IXGB_EECD_DI;
|
|
|
|
IXGB_WRITE_REG(hw, EECD, eecd_reg);
|
|
|
|
usec_delay(50);
|
|
|
|
ixgb_raise_clock(hw, &eecd_reg);
|
|
ixgb_lower_clock(hw, &eecd_reg);
|
|
|
|
mask = mask >> 1;
|
|
|
|
} while(mask);
|
|
|
|
/* We leave the "DI" bit set to "0" when we leave this routine. */
|
|
eecd_reg &= ~IXGB_EECD_DI;
|
|
IXGB_WRITE_REG(hw, EECD, eecd_reg);
|
|
return;
|
|
}
|
|
|
|
/******************************************************************************
|
|
* Shift data bits in from the EEPROM
|
|
*
|
|
* hw - Struct containing variables accessed by shared code
|
|
*****************************************************************************/
|
|
static uint16_t
|
|
ixgb_shift_in_bits(struct ixgb_hw *hw)
|
|
{
|
|
uint32_t eecd_reg;
|
|
uint32_t i;
|
|
uint16_t data;
|
|
|
|
/* In order to read a register from the EEPROM, we need to shift 16 bits
|
|
* in from the EEPROM. Bits are "shifted in" by raising the clock input to
|
|
* the EEPROM (setting the SK bit), and then reading the value of the "DO"
|
|
* bit. During this "shifting in" process the "DI" bit should always be
|
|
* clear..
|
|
*/
|
|
|
|
eecd_reg = IXGB_READ_REG(hw, EECD);
|
|
|
|
eecd_reg &= ~(IXGB_EECD_DO | IXGB_EECD_DI);
|
|
data = 0;
|
|
|
|
for(i = 0; i < 16; i++) {
|
|
data = data << 1;
|
|
ixgb_raise_clock(hw, &eecd_reg);
|
|
|
|
eecd_reg = IXGB_READ_REG(hw, EECD);
|
|
|
|
eecd_reg &= ~(IXGB_EECD_DI);
|
|
if(eecd_reg & IXGB_EECD_DO)
|
|
data |= 1;
|
|
|
|
ixgb_lower_clock(hw, &eecd_reg);
|
|
}
|
|
|
|
return data;
|
|
}
|
|
|
|
/******************************************************************************
|
|
* Prepares EEPROM for access
|
|
*
|
|
* hw - Struct containing variables accessed by shared code
|
|
*
|
|
* Lowers EEPROM clock. Clears input pin. Sets the chip select pin. This
|
|
* function should be called before issuing a command to the EEPROM.
|
|
*****************************************************************************/
|
|
static void
|
|
ixgb_setup_eeprom(struct ixgb_hw *hw)
|
|
{
|
|
uint32_t eecd_reg;
|
|
|
|
eecd_reg = IXGB_READ_REG(hw, EECD);
|
|
|
|
/* Clear SK and DI */
|
|
eecd_reg &= ~(IXGB_EECD_SK | IXGB_EECD_DI);
|
|
IXGB_WRITE_REG(hw, EECD, eecd_reg);
|
|
|
|
/* Set CS */
|
|
eecd_reg |= IXGB_EECD_CS;
|
|
IXGB_WRITE_REG(hw, EECD, eecd_reg);
|
|
return;
|
|
}
|
|
|
|
/******************************************************************************
|
|
* Returns EEPROM to a "standby" state
|
|
*
|
|
* hw - Struct containing variables accessed by shared code
|
|
*****************************************************************************/
|
|
static void
|
|
ixgb_standby_eeprom(struct ixgb_hw *hw)
|
|
{
|
|
uint32_t eecd_reg;
|
|
|
|
eecd_reg = IXGB_READ_REG(hw, EECD);
|
|
|
|
/* Deselct EEPROM */
|
|
eecd_reg &= ~(IXGB_EECD_CS | IXGB_EECD_SK);
|
|
IXGB_WRITE_REG(hw, EECD, eecd_reg);
|
|
usec_delay(50);
|
|
|
|
/* Clock high */
|
|
eecd_reg |= IXGB_EECD_SK;
|
|
IXGB_WRITE_REG(hw, EECD, eecd_reg);
|
|
usec_delay(50);
|
|
|
|
/* Select EEPROM */
|
|
eecd_reg |= IXGB_EECD_CS;
|
|
IXGB_WRITE_REG(hw, EECD, eecd_reg);
|
|
usec_delay(50);
|
|
|
|
/* Clock low */
|
|
eecd_reg &= ~IXGB_EECD_SK;
|
|
IXGB_WRITE_REG(hw, EECD, eecd_reg);
|
|
usec_delay(50);
|
|
return;
|
|
}
|
|
|
|
/******************************************************************************
|
|
* Raises then lowers the EEPROM's clock pin
|
|
*
|
|
* hw - Struct containing variables accessed by shared code
|
|
*****************************************************************************/
|
|
static void
|
|
ixgb_clock_eeprom(struct ixgb_hw *hw)
|
|
{
|
|
uint32_t eecd_reg;
|
|
|
|
eecd_reg = IXGB_READ_REG(hw, EECD);
|
|
|
|
/* Rising edge of clock */
|
|
eecd_reg |= IXGB_EECD_SK;
|
|
IXGB_WRITE_REG(hw, EECD, eecd_reg);
|
|
usec_delay(50);
|
|
|
|
/* Falling edge of clock */
|
|
eecd_reg &= ~IXGB_EECD_SK;
|
|
IXGB_WRITE_REG(hw, EECD, eecd_reg);
|
|
usec_delay(50);
|
|
return;
|
|
}
|
|
|
|
/******************************************************************************
|
|
* Terminates a command by lowering the EEPROM's chip select pin
|
|
*
|
|
* hw - Struct containing variables accessed by shared code
|
|
*****************************************************************************/
|
|
static void
|
|
ixgb_cleanup_eeprom(struct ixgb_hw *hw)
|
|
{
|
|
uint32_t eecd_reg;
|
|
|
|
eecd_reg = IXGB_READ_REG(hw, EECD);
|
|
|
|
eecd_reg &= ~(IXGB_EECD_CS | IXGB_EECD_DI);
|
|
|
|
IXGB_WRITE_REG(hw, EECD, eecd_reg);
|
|
|
|
ixgb_clock_eeprom(hw);
|
|
return;
|
|
}
|
|
|
|
/******************************************************************************
|
|
* Waits for the EEPROM to finish the current command.
|
|
*
|
|
* hw - Struct containing variables accessed by shared code
|
|
*
|
|
* The command is done when the EEPROM's data out pin goes high.
|
|
*
|
|
* Returns:
|
|
* TRUE: EEPROM data pin is high before timeout.
|
|
* FALSE: Time expired.
|
|
*****************************************************************************/
|
|
static boolean_t
|
|
ixgb_wait_eeprom_command(struct ixgb_hw *hw)
|
|
{
|
|
uint32_t eecd_reg;
|
|
uint32_t i;
|
|
|
|
|
|
/* Toggle the CS line. This in effect tells to EEPROM to actually execute
|
|
* the command in question.
|
|
*/
|
|
ixgb_standby_eeprom(hw);
|
|
|
|
/* Now read DO repeatedly until is high (equal to '1'). The EEEPROM will
|
|
* signal that the command has been completed by raising the DO signal.
|
|
* If DO does not go high in 10 milliseconds, then error out.
|
|
*/
|
|
for(i = 0; i < 200; i++) {
|
|
eecd_reg = IXGB_READ_REG(hw, EECD);
|
|
|
|
if(eecd_reg & IXGB_EECD_DO)
|
|
return (TRUE);
|
|
|
|
usec_delay(50);
|
|
}
|
|
ASSERT(0);
|
|
return (FALSE);
|
|
}
|
|
|
|
|
|
/******************************************************************************
|
|
* Verifies that the EEPROM has a valid checksum
|
|
*
|
|
* hw - Struct containing variables accessed by shared code
|
|
*
|
|
* Reads the first 64 16 bit words of the EEPROM and sums the values read.
|
|
* If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
|
|
* valid.
|
|
*
|
|
* Returns:
|
|
* TRUE: Checksum is valid
|
|
* FALSE: Checksum is not valid.
|
|
*****************************************************************************/
|
|
boolean_t
|
|
ixgb_validate_eeprom_checksum(struct ixgb_hw *hw)
|
|
{
|
|
uint16_t checksum = 0;
|
|
uint16_t i;
|
|
|
|
for(i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++)
|
|
checksum += ixgb_read_eeprom(hw, i);
|
|
|
|
if(checksum == (uint16_t) EEPROM_SUM)
|
|
return (TRUE);
|
|
else
|
|
return (FALSE);
|
|
}
|
|
|
|
/******************************************************************************
|
|
* Calculates the EEPROM checksum and writes it to the EEPROM
|
|
*
|
|
* hw - Struct containing variables accessed by shared code
|
|
*
|
|
* Sums the first 63 16 bit words of the EEPROM. Subtracts the sum from 0xBABA.
|
|
* Writes the difference to word offset 63 of the EEPROM.
|
|
*****************************************************************************/
|
|
void
|
|
ixgb_update_eeprom_checksum(struct ixgb_hw *hw)
|
|
{
|
|
uint16_t checksum = 0;
|
|
uint16_t i;
|
|
|
|
for(i = 0; i < EEPROM_CHECKSUM_REG; i++)
|
|
checksum += ixgb_read_eeprom(hw, i);
|
|
|
|
checksum = (uint16_t) EEPROM_SUM - checksum;
|
|
|
|
ixgb_write_eeprom(hw, EEPROM_CHECKSUM_REG, checksum);
|
|
return;
|
|
}
|
|
|
|
/******************************************************************************
|
|
* Writes a 16 bit word to a given offset in the EEPROM.
|
|
*
|
|
* hw - Struct containing variables accessed by shared code
|
|
* reg - offset within the EEPROM to be written to
|
|
* data - 16 bit word to be writen to the EEPROM
|
|
*
|
|
* If ixgb_update_eeprom_checksum is not called after this function, the
|
|
* EEPROM will most likely contain an invalid checksum.
|
|
*
|
|
*****************************************************************************/
|
|
void
|
|
ixgb_write_eeprom(struct ixgb_hw *hw,
|
|
uint16_t offset,
|
|
uint16_t data)
|
|
{
|
|
/* Prepare the EEPROM for writing */
|
|
ixgb_setup_eeprom(hw);
|
|
|
|
/* Send the 9-bit EWEN (write enable) command to the EEPROM (5-bit opcode
|
|
* plus 4-bit dummy). This puts the EEPROM into write/erase mode.
|
|
*/
|
|
ixgb_shift_out_bits(hw, EEPROM_EWEN_OPCODE, 5);
|
|
ixgb_shift_out_bits(hw, 0, 4);
|
|
|
|
/* Prepare the EEPROM */
|
|
ixgb_standby_eeprom(hw);
|
|
|
|
/* Send the Write command (3-bit opcode + 6-bit addr) */
|
|
ixgb_shift_out_bits(hw, EEPROM_WRITE_OPCODE, 3);
|
|
ixgb_shift_out_bits(hw, offset, 6);
|
|
|
|
/* Send the data */
|
|
ixgb_shift_out_bits(hw, data, 16);
|
|
|
|
ixgb_wait_eeprom_command(hw);
|
|
|
|
/* Recover from write */
|
|
ixgb_standby_eeprom(hw);
|
|
|
|
/* Send the 9-bit EWDS (write disable) command to the EEPROM (5-bit
|
|
* opcode plus 4-bit dummy). This takes the EEPROM out of write/erase
|
|
* mode.
|
|
*/
|
|
ixgb_shift_out_bits(hw, EEPROM_EWDS_OPCODE, 5);
|
|
ixgb_shift_out_bits(hw, 0, 4);
|
|
|
|
/* Done with writing */
|
|
ixgb_cleanup_eeprom(hw);
|
|
|
|
return;
|
|
}
|
|
|
|
/******************************************************************************
|
|
* Reads a 16 bit word from the EEPROM.
|
|
*
|
|
* hw - Struct containing variables accessed by shared code
|
|
* offset - offset of 16 bit word in the EEPROM to read
|
|
*
|
|
* Returns:
|
|
* The 16-bit value read from the eeprom
|
|
*****************************************************************************/
|
|
uint16_t
|
|
ixgb_read_eeprom(struct ixgb_hw *hw,
|
|
uint16_t offset)
|
|
{
|
|
uint16_t data;
|
|
|
|
/* Prepare the EEPROM for reading */
|
|
ixgb_setup_eeprom(hw);
|
|
|
|
/* Send the READ command (opcode + addr) */
|
|
ixgb_shift_out_bits(hw, EEPROM_READ_OPCODE, 3);
|
|
/*
|
|
* We have a 64 word EEPROM, there are 6 address bits
|
|
*/
|
|
ixgb_shift_out_bits(hw, offset, 6);
|
|
|
|
/* Read the data */
|
|
data = ixgb_shift_in_bits(hw);
|
|
|
|
/* End this read operation */
|
|
ixgb_standby_eeprom(hw);
|
|
|
|
return (data);
|
|
}
|
|
|
|
/******************************************************************************
|
|
* Reads eeprom and stores data in shared structure.
|
|
* Validates eeprom checksum and eeprom signature.
|
|
*
|
|
* hw - Struct containing variables accessed by shared code
|
|
*
|
|
* Returns:
|
|
* TRUE: if eeprom read is successful
|
|
* FALSE: otherwise.
|
|
*****************************************************************************/
|
|
boolean_t
|
|
ixgb_get_eeprom_data(struct ixgb_hw *hw)
|
|
{
|
|
uint16_t i;
|
|
uint16_t checksum = 0;
|
|
struct ixgb_ee_map_type *ee_map;
|
|
|
|
DEBUGFUNC("ixgb_get_eeprom_data");
|
|
|
|
ee_map = (struct ixgb_ee_map_type *) hw->eeprom;
|
|
|
|
DEBUGOUT("ixgb_ee: Reading eeprom data\n");
|
|
for (i=0; i < IXGB_EEPROM_SIZE ; i++) {
|
|
uint16_t ee_data;
|
|
ee_data = ixgb_read_eeprom(hw, i);
|
|
checksum += ee_data;
|
|
hw->eeprom[i] = le16_to_cpu (ee_data);
|
|
}
|
|
|
|
if (checksum != (uint16_t) EEPROM_SUM) {
|
|
DEBUGOUT("ixgb_ee: Checksum invalid.\n");
|
|
return (FALSE);
|
|
}
|
|
|
|
if ((ee_map->init_ctrl_reg_1 & le16_to_cpu(EEPROM_ICW1_SIGNATURE_MASK))
|
|
!= le16_to_cpu(EEPROM_ICW1_SIGNATURE_VALID)) {
|
|
DEBUGOUT("ixgb_ee: Signature invalid.\n");
|
|
return(FALSE);
|
|
}
|
|
|
|
return(TRUE);
|
|
}
|
|
|
|
|
|
/******************************************************************************
|
|
* Local function to check if the eeprom signature is good
|
|
* If the eeprom signature is good, calls ixgb)get_eeprom_data.
|
|
*
|
|
* hw - Struct containing variables accessed by shared code
|
|
*
|
|
* Returns:
|
|
* TRUE: eeprom signature was good and the eeprom read was successful
|
|
* FALSE: otherwise.
|
|
******************************************************************************/
|
|
static boolean_t
|
|
ixgb_check_and_get_eeprom_data (struct ixgb_hw* hw)
|
|
{
|
|
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *) hw->eeprom;
|
|
|
|
|
|
if ((ee_map->init_ctrl_reg_1 & le16_to_cpu(EEPROM_ICW1_SIGNATURE_MASK))
|
|
== le16_to_cpu(EEPROM_ICW1_SIGNATURE_VALID)) {
|
|
return (TRUE);
|
|
} else {
|
|
return ixgb_get_eeprom_data(hw);
|
|
}
|
|
}
|
|
|
|
/******************************************************************************
|
|
* return a word from the eeprom
|
|
*
|
|
* hw - Struct containing variables accessed by shared code
|
|
* index - Offset of eeprom word
|
|
*
|
|
* Returns:
|
|
* Word at indexed offset in eeprom, if valid, 0 otherwise.
|
|
******************************************************************************/
|
|
uint16_t
|
|
ixgb_get_eeprom_word(struct ixgb_hw *hw, uint16_t index)
|
|
{
|
|
|
|
if ((index < IXGB_EEPROM_SIZE) &&
|
|
(ixgb_check_and_get_eeprom_data (hw) == TRUE)) {
|
|
return(hw->eeprom[index]);
|
|
}
|
|
|
|
return(0);
|
|
}
|
|
|
|
|
|
/******************************************************************************
|
|
* return the mac address from EEPROM
|
|
*
|
|
* hw - Struct containing variables accessed by shared code
|
|
* mac_addr - Ethernet Address if EEPROM contents are valid, 0 otherwise
|
|
*
|
|
* Returns: None.
|
|
******************************************************************************/
|
|
void
|
|
ixgb_get_ee_mac_addr(struct ixgb_hw *hw,
|
|
uint8_t *mac_addr)
|
|
{
|
|
int i;
|
|
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *) hw->eeprom;
|
|
|
|
DEBUGFUNC("ixgb_get_ee_mac_addr");
|
|
|
|
if (ixgb_check_and_get_eeprom_data (hw) == TRUE) {
|
|
for (i = 0; i < IXGB_ETH_LENGTH_OF_ADDRESS; i++) {
|
|
mac_addr[i] = ee_map->mac_addr[i];
|
|
DEBUGOUT2("mac(%d) = %.2X\n", i, mac_addr[i]);
|
|
}
|
|
}
|
|
}
|
|
|
|
/******************************************************************************
|
|
* return the compatibility flags from EEPROM
|
|
*
|
|
* hw - Struct containing variables accessed by shared code
|
|
*
|
|
* Returns:
|
|
* compatibility flags if EEPROM contents are valid, 0 otherwise
|
|
******************************************************************************/
|
|
uint16_t
|
|
ixgb_get_ee_compatibility(struct ixgb_hw *hw)
|
|
{
|
|
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *) hw->eeprom;
|
|
|
|
if (ixgb_check_and_get_eeprom_data (hw) == TRUE)
|
|
return(ee_map->compatibility);
|
|
|
|
return(0);
|
|
}
|
|
|
|
/******************************************************************************
|
|
* return the Printed Board Assembly number from EEPROM
|
|
*
|
|
* hw - Struct containing variables accessed by shared code
|
|
*
|
|
* Returns:
|
|
* PBA number if EEPROM contents are valid, 0 otherwise
|
|
******************************************************************************/
|
|
uint32_t
|
|
ixgb_get_ee_pba_number(struct ixgb_hw *hw)
|
|
{
|
|
if (ixgb_check_and_get_eeprom_data (hw) == TRUE)
|
|
return ( le16_to_cpu(hw->eeprom[EEPROM_PBA_1_2_REG])
|
|
| (le16_to_cpu(hw->eeprom[EEPROM_PBA_3_4_REG])<<16));
|
|
|
|
return(0);
|
|
}
|
|
|
|
/******************************************************************************
|
|
* return the Initialization Control Word 1 from EEPROM
|
|
*
|
|
* hw - Struct containing variables accessed by shared code
|
|
*
|
|
* Returns:
|
|
* Initialization Control Word 1 if EEPROM contents are valid, 0 otherwise
|
|
******************************************************************************/
|
|
uint16_t
|
|
ixgb_get_ee_init_ctrl_reg_1(struct ixgb_hw *hw)
|
|
{
|
|
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *) hw->eeprom;
|
|
|
|
if (ixgb_check_and_get_eeprom_data (hw) == TRUE)
|
|
return(ee_map->init_ctrl_reg_1);
|
|
|
|
return(0);
|
|
}
|
|
|
|
/******************************************************************************
|
|
* return the Initialization Control Word 2 from EEPROM
|
|
*
|
|
* hw - Struct containing variables accessed by shared code
|
|
*
|
|
* Returns:
|
|
* Initialization Control Word 2 if EEPROM contents are valid, 0 otherwise
|
|
******************************************************************************/
|
|
uint16_t
|
|
ixgb_get_ee_init_ctrl_reg_2(struct ixgb_hw *hw)
|
|
{
|
|
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *) hw->eeprom;
|
|
|
|
if (ixgb_check_and_get_eeprom_data (hw) == TRUE)
|
|
return(ee_map->init_ctrl_reg_2);
|
|
|
|
return(0);
|
|
}
|
|
|
|
/******************************************************************************
|
|
* return the Subsystem Id from EEPROM
|
|
*
|
|
* hw - Struct containing variables accessed by shared code
|
|
*
|
|
* Returns:
|
|
* Subsystem Id if EEPROM contents are valid, 0 otherwise
|
|
******************************************************************************/
|
|
uint16_t
|
|
ixgb_get_ee_subsystem_id(struct ixgb_hw *hw)
|
|
{
|
|
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *) hw->eeprom;
|
|
|
|
if (ixgb_check_and_get_eeprom_data (hw) == TRUE)
|
|
return(ee_map->subsystem_id);
|
|
|
|
return(0);
|
|
}
|
|
|
|
/******************************************************************************
|
|
* return the Sub Vendor Id from EEPROM
|
|
*
|
|
* hw - Struct containing variables accessed by shared code
|
|
*
|
|
* Returns:
|
|
* Sub Vendor Id if EEPROM contents are valid, 0 otherwise
|
|
******************************************************************************/
|
|
uint16_t
|
|
ixgb_get_ee_subvendor_id(struct ixgb_hw *hw)
|
|
{
|
|
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *) hw->eeprom;
|
|
|
|
if (ixgb_check_and_get_eeprom_data (hw) == TRUE)
|
|
return(ee_map->subvendor_id);
|
|
|
|
return(0);
|
|
}
|
|
|
|
/******************************************************************************
|
|
* return the Device Id from EEPROM
|
|
*
|
|
* hw - Struct containing variables accessed by shared code
|
|
*
|
|
* Returns:
|
|
* Device Id if EEPROM contents are valid, 0 otherwise
|
|
******************************************************************************/
|
|
uint16_t
|
|
ixgb_get_ee_device_id(struct ixgb_hw *hw)
|
|
{
|
|
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *) hw->eeprom;
|
|
|
|
if (ixgb_check_and_get_eeprom_data (hw) == TRUE)
|
|
return(ee_map->device_id);
|
|
|
|
return(0);
|
|
}
|
|
|
|
/******************************************************************************
|
|
* return the Vendor Id from EEPROM
|
|
*
|
|
* hw - Struct containing variables accessed by shared code
|
|
*
|
|
* Returns:
|
|
* Device Id if EEPROM contents are valid, 0 otherwise
|
|
******************************************************************************/
|
|
uint16_t
|
|
ixgb_get_ee_vendor_id(struct ixgb_hw *hw)
|
|
{
|
|
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *) hw->eeprom;
|
|
|
|
if (ixgb_check_and_get_eeprom_data (hw) == TRUE)
|
|
return(ee_map->vendor_id);
|
|
|
|
return(0);
|
|
}
|
|
|
|
/******************************************************************************
|
|
* return the Software Defined Pins Register from EEPROM
|
|
*
|
|
* hw - Struct containing variables accessed by shared code
|
|
*
|
|
* Returns:
|
|
* SDP Register if EEPROM contents are valid, 0 otherwise
|
|
******************************************************************************/
|
|
uint16_t
|
|
ixgb_get_ee_swdpins_reg(struct ixgb_hw *hw)
|
|
{
|
|
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *) hw->eeprom;
|
|
|
|
if (ixgb_check_and_get_eeprom_data (hw) == TRUE)
|
|
return(ee_map->swdpins_reg);
|
|
|
|
return(0);
|
|
}
|
|
|
|
/******************************************************************************
|
|
* return the D3 Power Management Bits from EEPROM
|
|
*
|
|
* hw - Struct containing variables accessed by shared code
|
|
*
|
|
* Returns:
|
|
* D3 Power Management Bits if EEPROM contents are valid, 0 otherwise
|
|
******************************************************************************/
|
|
uint8_t
|
|
ixgb_get_ee_d3_power(struct ixgb_hw *hw)
|
|
{
|
|
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *) hw->eeprom;
|
|
|
|
if (ixgb_check_and_get_eeprom_data (hw) == TRUE)
|
|
return(ee_map->d3_power);
|
|
|
|
return(0);
|
|
}
|
|
|
|
/******************************************************************************
|
|
* return the D0 Power Management Bits from EEPROM
|
|
*
|
|
* hw - Struct containing variables accessed by shared code
|
|
*
|
|
* Returns:
|
|
* D0 Power Management Bits if EEPROM contents are valid, 0 otherwise
|
|
******************************************************************************/
|
|
uint8_t
|
|
ixgb_get_ee_d0_power(struct ixgb_hw *hw)
|
|
{
|
|
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *) hw->eeprom;
|
|
|
|
if (ixgb_check_and_get_eeprom_data (hw) == TRUE)
|
|
return(ee_map->d0_power);
|
|
|
|
return(0);
|
|
}
|