freebsd-dev/etc/etc.mips/ttys
Glen Barber d47fd83325 Enable all callin ttys if the tty is an available console.
Discussed on:	-arch@ (no objections)
MFC after:	1 week
Sponsored by:	The FreeBSD Foundation
2015-10-20 16:10:46 +00:00

37 lines
1.5 KiB
Plaintext

#
# $FreeBSD$
# @(#)ttys 5.1 (Berkeley) 4/17/89
#
# This file specifies various information about terminals on the system.
# It is used by several different programs. Common entries for the
# various columns include:
#
# name The name of the terminal device.
#
# getty The program to start running on the terminal. Typically a
# getty program, as the name implies. Other common entries
# include none, when no getty is needed, and xdm, to start the
# X Window System.
#
# type The initial terminal type for this port. For hardwired
# terminal lines, this will contain the type of terminal used.
# For virtual consoles, the correct type is typically xterm.
# Other common values include dialup for incoming modem ports, and
# unknown when the terminal type cannot be predetermined.
#
# status Must be on or off. If on, init will run the getty program on
# the specified port. If the word "secure" appears, this tty
# allows root login.
#
# name getty type status comments
#
# If console is marked "insecure", then init will ask for the root password
# when going to single-user mode.
console none unknown off secure
# Serial terminals
# The 'dialup' keyword identifies dialin lines to login, fingerd etc.
ttyu0 "/usr/libexec/getty 3wire" vt100 onifconsole secure
ttyu1 "/usr/libexec/getty 3wire" vt100 onifconsole secure
ttyu2 "/usr/libexec/getty 3wire" vt100 onifconsole secure
ttyu3 "/usr/libexec/getty 3wire" vt100 onifconsole secure