freebsd-dev/sys/mips/conf/WZR-300HP
Sean Bruno 7995e29931 Bring in configuration for Buffalo Airstation WZR-300HP, Atheros based
wireless home router.

Notable things:
2x 16 MB flash devices
Atheros Wireless
Atheros Switching

Many thanks to adrian@ for his guidance on this and keeping the drivers in
the base system up to date

Approved by:    re (delphij)
2013-09-17 22:26:07 +00:00

58 lines
1.3 KiB
Plaintext

#
# Specific board setup for the Buffalo Airstation WZR-300HP
#
# The WZR-300HP has the following hardware:
#
# + AR7242 CPU SoC
# + AR9280 5GHz 11n
# + AR8136 Gigabit switch
# + 2 m25ll128 based 16MB flash
# + 64MB RAM
# + uboot environment
# $FreeBSD$
include "AR724X_BASE"
ident "WZR-300HP"
hints "WZR-300HP.hints"
options AR71XX_REALMEM=64*1024*1024
options AR71XX_ENV_UBOOT
options BOOTVERBOSE
# Don't include the SCSI/CAM strings in the default build
options SCSI_NO_SENSE_STRINGS
options SCSI_NO_OP_STRINGS
# .. And no sysctl strings
options NO_SYSCTL_DESCR
# GEOM modules
device geom_map # to get access to the SPI flash partitions
device geom_uncompress # compressed in-memory filesystem hackery!
options ROOTDEVNAME=\"ufs:/dev/map/rootfs.uncompress\"
# options MD_ROOT
# options MD_ROOT_SIZE="6144"
options AR71XX_ATH_EEPROM # Fetch EEPROM/PCI config from flash
options ATH_EEPROM_FIRMWARE # Use EEPROM from flash
device firmware # Used by the above
# Options required for miiproxy and mdiobus
options ARGE_MDIO # Export an MDIO bus separate from arge
device miiproxy # MDIO bus <-> MII PHY rendezvous
device etherswitch
device arswitch
# Enable GPIO
device gpio
device gpioled
# hwpmc
device hwpmc_mips24k
device hwpmc