b8f915ab24
xdma(4) interface. This allows us to switch between Altera mSGDMA or SoftDMA engines used by atse(4) device. This also makes atse(4) driver become 25% smaller. Sponsored by: DARPA, AFRL Differential Revision: https://reviews.freebsd.org/D9618
337 lines
8.2 KiB
Plaintext
337 lines
8.2 KiB
Plaintext
/*-
|
|
* Copyright (c) 2012-2013 Robert N. M. Watson
|
|
* Copyright (c) 2013 SRI International
|
|
* All rights reserved.
|
|
*
|
|
* This software was developed by SRI International and the University of
|
|
* Cambridge Computer Laboratory under DARPA/AFRL contract (FA8750-10-C-0237)
|
|
* ("CTSRD"), as part of the DARPA CRASH research programme.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
/*
|
|
* Device names here have been largely made up on the spot, especially for the
|
|
* "compatible" strings, and might want to be revised.
|
|
*
|
|
* For now, use 32-bit addressing as our Avalon bus is 32-bit. However, in
|
|
* the future, we should likely change to 64-bit.
|
|
*/
|
|
|
|
/ {
|
|
model = "SRI/Cambridge BeriPad (DE4)";
|
|
compatible = "sri-cambridge,beripad-de4";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
/*
|
|
* Secondary CPUs all start disabled and use the
|
|
* spin-table enable method. cpu-release-addr must be
|
|
* specified for each cpu other than cpu@0. Values of
|
|
* cpu-release-addr grow down from 0x100000 (kernel).
|
|
*/
|
|
status = "disabled";
|
|
enable-method = "spin-table";
|
|
|
|
cpu@0 {
|
|
device-type = "cpu";
|
|
compatible = "sri-cambridge,beri";
|
|
|
|
reg = <0 1>;
|
|
status = "okay";
|
|
};
|
|
|
|
/*
|
|
cpu@1 {
|
|
device-type = "cpu";
|
|
compatible = "sri-cambridge,beri";
|
|
|
|
reg = <1 1>;
|
|
// XXX: should we need cached prefix?
|
|
cpu-release-addr = <0xffffffff 0x800fffe0>;
|
|
};
|
|
*/
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x0 0x40000000>; // 1G at 0x0
|
|
};
|
|
|
|
cpuintc: cpuintc@0 {
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
compatible = "mti,cpu-interrupt-controller";
|
|
};
|
|
|
|
beripic0: beripic@7f804000 {
|
|
compatible = "sri-cambridge,beri-pic";
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x7f804000 0x400
|
|
0x7f806000 0x10
|
|
0x7f806080 0x10
|
|
0x7f806100 0x10>;
|
|
interrupts = < 2 3 4 5 6 >;
|
|
hard-interrupt-sources = <64>;
|
|
soft-interrupt-sources = <64>;
|
|
interrupt-parent = <&cpuintc>;
|
|
};
|
|
|
|
/*
|
|
beripic1: beripic@7f808000 {
|
|
compatible = "sri-cambridge,beri-pic";
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x7f808000 0x400
|
|
0x7f80a000 0x10
|
|
0x7f80a080 0x10
|
|
0x7f80a100 0x10>;
|
|
interrupts = < 2 3 4 5 6 >;
|
|
hard-interrupt-sources = <64>;
|
|
soft-interrupt-sources = <64>;
|
|
interrupt-parent = <&cpuintc>;
|
|
};
|
|
*/
|
|
|
|
soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
#interrupt-cells = <1>;
|
|
|
|
compatible = "simple-bus", "mips,mips4k";
|
|
ranges;
|
|
|
|
serial@7f002100 {
|
|
compatible = "ns16550";
|
|
reg = <0x7f002100 0x20>;
|
|
reg-shift = <2>;
|
|
clock-frequency = <50000000>;
|
|
interrupts = <6>;
|
|
interrupt-parent = <&beripic0>;
|
|
};
|
|
|
|
serial@7f000000 {
|
|
compatible = "altera,jtag_uart-11_0";
|
|
reg = <0x7f000000 0x40>;
|
|
interrupts = <0>;
|
|
interrupt-parent = <&beripic0>;
|
|
};
|
|
|
|
serial@7f001000 {
|
|
compatible = "altera,jtag_uart-11_0";
|
|
reg = <0x7f001000 0x40>;
|
|
};
|
|
|
|
serial@7f002000 {
|
|
compatible = "altera,jtag_uart-11_0";
|
|
reg = <0x7f002000 0x40>;
|
|
};
|
|
|
|
sdcard@7f008000 {
|
|
compatible = "altera,sdcard_11_2011";
|
|
reg = <0x7f008000 0x400>;
|
|
};
|
|
|
|
led@7f006000 {
|
|
compatible = "sri-cambridge,de4led";
|
|
reg = <0x7f006000 0x1>;
|
|
};
|
|
|
|
/*
|
|
* XXX-BZ keep flash before ethernet so that atse can read the
|
|
* Ethernet addresses for now.
|
|
*/
|
|
flash@74000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "cfi-flash";
|
|
reg = <0x74000000 0x4000000>;
|
|
|
|
/* Board configuration */
|
|
partition@0 {
|
|
reg = <0x0 0x20000>;
|
|
label = "config";
|
|
};
|
|
|
|
/* Power up FPGA image */
|
|
partition@20000 {
|
|
reg = <0x20000 0xc00000>;
|
|
label = "fpga0";
|
|
};
|
|
|
|
/* Secondary FPGA image (on RE_CONFIGn button) */
|
|
partition@C20000 {
|
|
reg = <0xc20000 0xc00000>;
|
|
label = "fpga1";
|
|
};
|
|
|
|
/* Space for operating system use */
|
|
partition@1820000 {
|
|
reg = <0x1820000 0x027c0000>;
|
|
label = "os";
|
|
};
|
|
|
|
/* Second stage bootloader */
|
|
parition@3fe0000 {
|
|
reg = <0x3fe0000 0x20000>;
|
|
label = "boot";
|
|
};
|
|
};
|
|
|
|
msgdma0: msgdma@80004080 {
|
|
compatible = "altr,msgdma-16.0", "altr,msgdma-1.0";
|
|
reg = <0x80004080 0x00000020>,
|
|
<0x800040a0 0x00000020>;
|
|
reg-names = "csr", "descriptor_slave";
|
|
interrupts = <14>;
|
|
interrupt-parent = <&beripic0>;
|
|
#dma-cells = <3>;
|
|
};
|
|
|
|
msgdma1: msgdma@80004000 {
|
|
compatible = "altr,msgdma-16.0", "altr,msgdma-1.0";
|
|
reg = <0x80004000 0x00000020>,
|
|
<0x80004020 0x00000020>;
|
|
reg-names = "csr", "descriptor_slave";
|
|
interrupts = <13>;
|
|
interrupt-parent = <&beripic0>;
|
|
#dma-cells = <3>;
|
|
};
|
|
|
|
softdma0: softdma@7f007400 {
|
|
compatible = "altr,softdma";
|
|
reg = < 0x7f007400 0x8 /* tx */
|
|
0x7f007420 0x20 >; /* txc */
|
|
interrupts = <2>;
|
|
interrupt-parent = <&beripic0>;
|
|
#dma-cells = <3>;
|
|
};
|
|
|
|
softdma1: softdma@7f007500 {
|
|
compatible = "altr,softdma";
|
|
reg = < 0x7f007500 0x8 /* rx */
|
|
0x7f007520 0x20 >; /* rxc */
|
|
interrupts = <1>;
|
|
interrupt-parent = <&beripic0>;
|
|
#dma-cells = <3>;
|
|
};
|
|
|
|
softdma2: softdma@7f005400 {
|
|
compatible = "altr,softdma";
|
|
reg = < 0x7f005400 0x8 /* tx */
|
|
0x7f005420 0x20 >; /* txc */
|
|
interrupts = <12>;
|
|
interrupt-parent = <&beripic0>;
|
|
#dma-cells = <3>;
|
|
};
|
|
|
|
softdma3: softdma@7f005500 {
|
|
compatible = "altr,softdma";
|
|
reg = < 0x7f005500 0x8 /* rx */
|
|
0x7f005520 0x20 >; /* rxc */
|
|
interrupts = <11>;
|
|
interrupt-parent = <&beripic0>;
|
|
#dma-cells = <3>;
|
|
};
|
|
|
|
ethernet@80007000 {
|
|
compatible = "altera,atse";
|
|
reg = <0x80007000 0x400>; /* mac */
|
|
dmas = <&msgdma0 0 0 0xffffffff>,
|
|
<&msgdma1 1 1 0xffffffff>;
|
|
dma-names = "tx", "rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
ethernet@7f007000 {
|
|
compatible = "altera,atse";
|
|
reg = <0x7f007000 0x400>; /* mac */
|
|
dmas = <&softdma0 0 0 0xffffffff>,
|
|
<&softdma1 1 1 0xffffffff>;
|
|
dma-names = "tx", "rx";
|
|
status = "okay";
|
|
};
|
|
|
|
ethernet@7f005000 {
|
|
compatible = "altera,atse";
|
|
reg = <0x7f005000 0x400>;
|
|
dmas = <&softdma2 0 0 0xffffffff>,
|
|
<&softdma3 1 1 0xffffffff>;
|
|
dma-names = "tx", "rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
touchscreen@70400000 {
|
|
compatible = "sri-cambridge,mtl";
|
|
panel-size = < 800 480 >;
|
|
reg = <0x70400000 0x1000
|
|
0x70000000 0x177000
|
|
0x70177000 0x2000>;
|
|
};
|
|
|
|
usb@0x7f100000 {
|
|
compatible = "nxp,usb-isp1761";
|
|
reg = <0x7f100000 0x40000
|
|
0x7f140000 0x4>;
|
|
// IRQ 4 is DC, IRQ 5 is HC.
|
|
interrupts = <4 5>;
|
|
interrupt-parent = <&beripic0>;
|
|
};
|
|
|
|
avgen@0x7f009000 {
|
|
compatible = "sri-cambridge,avgen";
|
|
reg = <0x7f009000 0x2>;
|
|
sri-cambridge,width = <1>;
|
|
sri-cambridge,fileio = "r";
|
|
sri-cambridge,devname = "de4bsw";
|
|
};
|
|
|
|
avgen@0x7f00a000 {
|
|
compatible = "sri-cambridge,avgen";
|
|
reg = <0x7f00a000 0x14>;
|
|
sri-cambridge,width = <4>;
|
|
sri-cambridge,fileio = "rw";
|
|
sri-cambridge,devname = "berirom";
|
|
};
|
|
|
|
avgen@0x7f00c000 {
|
|
compatible = "sri-cambridge,avgen";
|
|
reg = <0x7f00c000 0x8>;
|
|
sri-cambridge,width = <4>;
|
|
sri-cambridge,fileio = "rw";
|
|
sri-cambridge,devname = "de4tempfan";
|
|
};
|
|
};
|
|
};
|