freebsd-dev/sys/dev/flash/mx25lreg.h
Ruslan Bukin eb69ed7f87 Add driver for Cadence Quad SPI Flash Controller found on
Intel® Arria® 10 SoC.

Cadence Quad SPI Flash is not generic SPI controller, but SPI flash
controller, so don't use spibus here, instead provide quad spi flash
interface.

Since it is not on spibus, then mx25l flash device driver is not usable
here, so provide new n25q flash device driver with quad spi flash
interface.

Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D10245
2018-04-23 10:35:00 +00:00

72 lines
2.3 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2009, Oleksandr Tymoshenko <gonzo@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef __MX25LREG_H__
#define __MX25LREG_H__
/*
* Commands
*/
#define CMD_WRITE_ENABLE 0x06
#define CMD_WRITE_DISABLE 0x04
#define CMD_READ_IDENT 0x9F
#define CMD_READ_STATUS 0x05
#define CMD_WRITE_STATUS 0x01
#define CMD_READ 0x03
#define CMD_FAST_READ 0x0B
#define CMD_PAGE_PROGRAM 0x02
#define CMD_SECTOR_ERASE 0xD8
#define CMD_BULK_ERASE 0xC7
#define CMD_BLOCK_4K_ERASE 0x20
#define CMD_BLOCK_32K_ERASE 0x52
#define CMD_ENTER_4B_MODE 0xB7
#define CMD_EXIT_4B_MODE 0xE9
/* Quad 4B-addressing operations. */
#define CMD_QUAD_SECTOR_ERASE 0xDC
#define CMD_QUAD_PAGE_PROGRAM 0x34
#define CMD_READ_4B_QUAD_OUTPUT 0x6C
/*
* Status register flags
*/
#define STATUS_SRWD (1 << 7)
#define STATUS_BP2 (1 << 4)
#define STATUS_BP1 (1 << 3)
#define STATUS_BP0 (1 << 2)
#define STATUS_WEL (1 << 1)
#define STATUS_WIP (1 << 0)
#define FLASH_PAGE_SIZE 256
#endif /* __MX25LREG_H__ */