freebsd-dev/sys/dev/ow/owc_gpiobus.c
Ian Lepore c7b0edf219 Update owc_gpiobus (one-wire over gpio) to the modern gpio_pin interface.
It used to be required that a device be a child of gpiobus(4) to manipulate
gpio pins. That requirement didn't work well for FDT-based systems with many
cross-hierarchy users of gpio, so a more modern framework was created that
removed the old hierarchy requirement.

These changes adapt the owc_gpiobus driver to use the newer gpio_pin_*
functions to acquire, release, and manipulate gpio pins. This allows a
single driver to work for both hinted-attachment and fdt-based systems, and
removes the requirement that any one-wire fdt nodes must appear at the root
of the devicetree.

Differential Revision:	https://reviews.freebsd.org/D22710
2019-12-17 15:56:48 +00:00

403 lines
10 KiB
C

/*-
* Copyright (c) 2015 M. Warner Losh <imp@FreeBSD.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_platform.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/gpio.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/module.h>
#include <sys/mutex.h>
#include <dev/gpio/gpiobusvar.h>
#include <dev/ow/owll.h>
#ifdef FDT
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
static struct ofw_compat_data compat_data[] = {
{"w1-gpio", true},
{NULL, false}
};
OFWBUS_PNP_INFO(compat_data);
SIMPLEBUS_PNP_INFO(compat_data);
#endif /* FDT */
#define OW_PIN 0
#define OWC_GPIOBUS_LOCK(_sc) mtx_lock(&(_sc)->sc_mtx)
#define OWC_GPIOBUS_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_mtx)
#define OWC_GPIOBUS_LOCK_INIT(_sc) \
mtx_init(&_sc->sc_mtx, device_get_nameunit(_sc->sc_dev), \
"owc_gpiobus", MTX_DEF)
#define OWC_GPIOBUS_LOCK_DESTROY(_sc) mtx_destroy(&_sc->sc_mtx);
struct owc_gpiobus_softc
{
device_t sc_dev;
gpio_pin_t sc_pin;
struct mtx sc_mtx;
};
static int owc_gpiobus_probe(device_t);
static int owc_gpiobus_attach(device_t);
static int owc_gpiobus_detach(device_t);
static int
owc_gpiobus_probe(device_t dev)
{
int rv;
/*
* By default we only bid to attach if specifically added by our parent
* (usually via hint.owc_gpiobus.#.at=busname). On FDT systems we bid
* as the default driver based on being configured in the FDT data.
*/
rv = BUS_PROBE_NOWILDCARD;
#ifdef FDT
if (ofw_bus_status_okay(dev) &&
ofw_bus_search_compatible(dev, compat_data)->ocd_data)
rv = BUS_PROBE_DEFAULT;
#endif
device_set_desc(dev, "GPIO one-wire bus");
return (rv);
}
static int
owc_gpiobus_attach(device_t dev)
{
struct owc_gpiobus_softc *sc;
int err;
sc = device_get_softc(dev);
sc->sc_dev = dev;
#ifdef FDT
/* Try to configure our pin from fdt data on fdt-based systems. */
err = gpio_pin_get_by_ofw_idx(dev, ofw_bus_get_node(dev), OW_PIN,
&sc->sc_pin);
#else
err = ENOENT;
#endif
/*
* If we didn't get configured by fdt data and our parent is gpiobus,
* see if we can be configured by the bus (allows hinted attachment even
* on fdt-based systems).
*/
if (err != 0 &&
strcmp("gpiobus", device_get_name(device_get_parent(dev))) == 0)
err = gpio_pin_get_by_child_index(dev, OW_PIN, &sc->sc_pin);
/* If we didn't get configured by either method, whine and punt. */
if (err != 0) {
device_printf(sc->sc_dev,
"cannot acquire gpio pin (config error)\n");
return (err);
}
OWC_GPIOBUS_LOCK_INIT(sc);
/*
* Add the ow bus as a child, but defer probing and attaching it until
* interrupts work, because we can't do IO for them until we can read
* the system timecounter (which initializes after device attachments).
*/
device_add_child(sc->sc_dev, "ow", -1);
return (bus_delayed_attach_children(dev));
}
static int
owc_gpiobus_detach(device_t dev)
{
struct owc_gpiobus_softc *sc;
int err;
sc = device_get_softc(dev);
if ((err = device_delete_children(dev)) != 0)
return (err);
gpio_pin_release(sc->sc_pin);
OWC_GPIOBUS_LOCK_DESTROY(sc);
return (0);
}
/*
* In the diagrams below, R is driven by the resistor pullup, M is driven by the
* master, and S is driven by the slave / target.
*/
/*
* These macros let what why we're doing stuff shine in the code
* below, and let the how be confined to here.
*/
#define OUTPIN(sc) gpio_pin_setflags((sc)->sc_pin, GPIO_PIN_OUTPUT)
#define INPIN(sc) gpio_pin_setflags((sc)->sc_pin, GPIO_PIN_INPUT)
#define GETPIN(sc, bp) gpio_pin_is_active((sc)->sc_pin, (bp))
#define LOW(sc) gpio_pin_set_active((sc)->sc_pin, false)
/*
* WRITE-ONE (see owll_if.m for timings) From Figure 4-1 AN-937
*
* |<---------tSLOT---->|<-tREC->|
* High RRRRM | RRRRRRRRRRRR|RRRRRRRRM
* M | R | | | M
* M| R | | | M
* Low MMMMMMM | | | MMMMMM...
* |<-tLOW1->| | |
* |<------15us--->| |
* |<--------60us---->|
*/
static int
owc_gpiobus_write_one(device_t dev, struct ow_timing *t)
{
struct owc_gpiobus_softc *sc;
sc = device_get_softc(dev);
critical_enter();
/* Force low */
OUTPIN(sc);
LOW(sc);
DELAY(t->t_low1);
/* Allow resistor to float line high */
INPIN(sc);
DELAY(t->t_slot - t->t_low1 + t->t_rec);
critical_exit();
return (0);
}
/*
* WRITE-ZERO (see owll_if.m for timings) From Figure 4-2 AN-937
*
* |<---------tSLOT------>|<-tREC->|
* High RRRRM | | |RRRRRRRM
* M | | R M
* M| | | |R M
* Low MMMMMMMMMMMMMMMMMMMMMR MMMMMM...
* |<--15us->| | |
* |<------60us--->| |
* |<-------tLOW0------>|
*/
static int
owc_gpiobus_write_zero(device_t dev, struct ow_timing *t)
{
struct owc_gpiobus_softc *sc;
sc = device_get_softc(dev);
critical_enter();
/* Force low */
OUTPIN(sc);
LOW(sc);
DELAY(t->t_low0);
/* Allow resistor to float line high */
INPIN(sc);
DELAY(t->t_slot - t->t_low0 + t->t_rec);
critical_exit();
return (0);
}
/*
* READ-DATA (see owll_if.m for timings) From Figure 4-3 AN-937
*
* |<---------tSLOT------>|<-tREC->|
* High RRRRM | rrrrrrrrrrrrrrrRRRRRRRM
* M | r | R M
* M| r | |R M
* Low MMMMMMMSSSSSSSSSSSSSSR MMMMMM...
* |<tLOWR>< sample > |
* |<------tRDV---->| |
* ->| |<-tRELEASE
*
* r -- allowed to pull high via the resitor when slave writes a 1-bit
*
*/
static int
owc_gpiobus_read_data(device_t dev, struct ow_timing *t, int *bit)
{
struct owc_gpiobus_softc *sc;
bool sample;
sbintime_t then, now;
sc = device_get_softc(dev);
critical_enter();
/* Force low for t_lowr microseconds */
then = sbinuptime();
OUTPIN(sc);
LOW(sc);
DELAY(t->t_lowr);
/*
* Slave is supposed to hold the line low for t_rdv microseconds for 0
* and immediately float it high for a 1. This is measured from the
* master's pushing the line low.
*/
INPIN(sc);
do {
now = sbinuptime();
GETPIN(sc, &sample);
} while (now - then < (t->t_rdv + 2) * SBT_1US && sample == false);
critical_exit();
if (now - then < t->t_rdv * SBT_1US)
*bit = 1;
else
*bit = 0;
/* Wait out the rest of t_slot */
do {
now = sbinuptime();
} while (now - then < (t->t_slot + t->t_rec) * SBT_1US);
return (0);
}
/*
* RESET AND PRESENCE PULSE (see owll_if.m for timings) From Figure 4-4 AN-937
*
* |<---------tRSTH------------>|
* High RRRM | | RRRRRRRS | RRRR RRM
* M | |R| |S | R M
* M| R | | S |R M
* Low MMMMMMMM MMMMMM| | | SSSSSSSSSS MMMMMM
* |<----tRSTL--->| | |<-tPDL---->|
* | ->| |<-tR | |
* |<tPDH>|
*
* Note: for Regular Speed operations, tRSTL + tR should be less than 960us to
* avoid interfering with other devices on the bus.
*
* Return values in *bit:
* -1 = Bus wiring error (stuck low).
* 0 = no presence pulse
* 1 = presence pulse detected
*/
static int
owc_gpiobus_reset_and_presence(device_t dev, struct ow_timing *t, int *bit)
{
struct owc_gpiobus_softc *sc;
bool sample;
sc = device_get_softc(dev);
/*
* Read the current state of the bus. The steady state of an idle bus is
* high. Badly wired buses that are missing the required pull up, or
* that have a short circuit to ground cause all kinds of mischief when
* we try to read them later. Return EIO if the bus is currently low.
*/
INPIN(sc);
GETPIN(sc, &sample);
if (sample == false) {
*bit = -1;
return (EIO);
}
critical_enter();
/* Force low */
OUTPIN(sc);
LOW(sc);
DELAY(t->t_rstl);
/* Allow resistor to float line high and then wait for reset pulse */
INPIN(sc);
DELAY(t->t_pdh + t->t_pdl / 2);
/* Read presence pulse */
GETPIN(sc, &sample);
*bit = sample;
critical_exit();
DELAY(t->t_rsth - (t->t_pdh + t->t_pdl / 2)); /* Timing not critical for this one */
/*
* Read the state of the bus after we've waited past the end of the rest
* window. It should return to high. If it is low, then we have some
* problem and should abort the reset.
*/
GETPIN(sc, &sample);
if (sample == false) {
*bit = -1;
return (EIO);
}
return (0);
}
static devclass_t owc_gpiobus_devclass;
static device_method_t owc_gpiobus_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, owc_gpiobus_probe),
DEVMETHOD(device_attach, owc_gpiobus_attach),
DEVMETHOD(device_detach, owc_gpiobus_detach),
DEVMETHOD(owll_write_one, owc_gpiobus_write_one),
DEVMETHOD(owll_write_zero, owc_gpiobus_write_zero),
DEVMETHOD(owll_read_data, owc_gpiobus_read_data),
DEVMETHOD(owll_reset_and_presence, owc_gpiobus_reset_and_presence),
{ 0, 0 }
};
static driver_t owc_gpiobus_driver = {
"owc",
owc_gpiobus_methods,
sizeof(struct owc_gpiobus_softc),
};
#ifdef FDT
DRIVER_MODULE(owc_gpiobus, simplebus, owc_gpiobus_driver, owc_gpiobus_devclass, 0, 0);
#endif
DRIVER_MODULE(owc_gpiobus, gpiobus, owc_gpiobus_driver, owc_gpiobus_devclass, 0, 0);
MODULE_DEPEND(owc_gpiobus, ow, 1, 1, 1);
MODULE_DEPEND(owc_gpiobus, gpiobus, 1, 1, 1);
MODULE_VERSION(owc_gpiobus, 1);